aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/virt-acpi-build.c
AgeCommit message (Collapse)Author
2021-02-05acpi: Permit OEM ID and OEM table ID fields to be changedMarian Postevca
Qemu's ACPI table generation sets the fields OEM ID and OEM table ID to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI table name. Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID and OEM table ID for the strings "BOCHS" and "BXPC" and if they are found, the game crashes(this may be an intentional detection mechanism to prevent playing the game in a virtualized environment). This patch allows you to override these default values. The feature can be used in this manner: qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN The oem-id string can be up to 6 bytes in size, and the oem-table-id string can be up to 8 bytes in size. If the string are smaller than their respective sizes they will be padded with space. If either of these parameters is not set, the current default values will be used for the one missing. Note that the the OEM Table ID field will not be extended with the name of the table, but will use either the default name or the user provided one. This does not affect the -acpitable option (for user-defined ACPI tables), which has precedence over -machine option. Signed-off-by: Marian Postevca <posteuca@mutex.one> Message-Id: <20210119003216.17637-3-posteuca@mutex.one> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-08hw/arm/virt: Remove virt machine state 'smp_cpus'Andrew Jones
virt machine's 'smp_cpus' and machine->smp.cpus must always have the same value. And, anywhere we have virt machine state we have machine state. So let's remove the redundancy. Also, to make it easier to see that machine->smp is the true source for "smp_cpus" and "max_cpus", avoid passing them in function parameters, preferring instead to get them from the state. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Ying Fang <fangying1@huawei.com> Message-id: 20201215174815.51520-1-drjones@redhat.com [PMM: minor formatting tweak to smp_cpus variable declaration] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-08acpi: Align the size to 128kYubo Miao
If table size is changed between virt_acpi_build and virt_acpi_build_update, the table size would not be updated to UEFI, therefore, just align the size to 128kb, which is enough and same with x86. It would warn if 64k is not enough and the align size should be updated. Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-7-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08acpi/gpex: Build tables for pxbYubo Miao
The resources of pxbs are obtained by crs_build and the resources used by pxbs would be moved from the resources defined for host-bridge. The resources for pxb are composed of following two parts: 1. The bar space of the pci-bridge/pcie-root-port behined it 2. The config space of devices behind it. Signed-off-by: Yubo Miao <miaoyubo@huawei.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20201119014841.7298-6-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-30arm: use acpi_dsdt_add_gpexGerd Hoffmann
Fill gpex config struct from memory map, then call the new acpi_dsdt_add_gpex helper function. No functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-4-kraxel@redhat.com
2020-09-17acpi: move acpi_dsdt_add_power_button() to gedGerd Hoffmann
Allow reuse for microvm. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200915120909.20838-7-kraxel@redhat.com
2020-09-01hw/arm/virt-acpi-build:Remove dead assignment in build_madt()Chen Qun
Clang static code analyzer show warning: hw/arm/virt-acpi-build.c:641:5: warning: Value stored to 'madt' is never read madt = acpi_data_push(table_data, sizeof *madt); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200827110311.164316-2-kuhn.chenqun@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27arm/acpi: fix an out of spec _UID for PCI rootMichael S. Tsirkin
On ARM/virt machine type QEMU currently reports an incorrect _UID in ACPI. The particular node in question is the primary PciRoot (PCI0 in ACPI), which gets assigned PCI0 in ACPI UID and 0 in the DevicePath. This is due to the _UID assigned to it by build_dsdt in hw/arm/virt-acpi-build.c Which does not correspond to the primary PCI identifier given by pcibus_num in hw/pci/pci.c In UEFI v2.8, section "10.4.2 Rules with ACPI _HID and _UID" ends with the paragraph, Root PCI bridges will use the plug and play ID of PNP0A03, This will be stored in the ACPI Device Path _HID field, or in the Expanded ACPI Device Path _CID field to match the ACPI name space. The _UID in the ACPI Device Path structure must match the _UID in the ACPI name space. (See especially the last sentence.) A similar bug has been reported on i386, on that architecture it has been reported to confuse at least macOS which uses ACPI UIDs to build the DevicePath for NVRAM boot options, while OVMF firmware gets them via an internal channel through QEMU. When UEFI firmware and ACPI have different values, this makes the underlying operating system unable to report its boot option. Cc: qemu-stable@nongnu.org Reported-by: Vitaly Cheptsov <vit9696@protonmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-07-03hw/arm/virt-acpi-build: Only expose flash on older machine typesAndrew Jones
The flash device is exclusively for the host-controlled firmware, so we should not expose it to the OS. Exposing it risks the OS messing with it, which could break firmware runtime services and surprise the OS when all its changes disappear after reboot. As firmware needs the device and uses DT, we leave the device exposed there. It's up to firmware to remove the nodes from DT before sending it on to the OS. However, there's no need to force firmware to remove tables from ACPI (which it doesn't know how to do anyway), so we simply don't add the tables in the first place. But, as we've been adding the tables for quite some time and don't want to change the default hardware exposed to versioned machines, then we only stop exposing the flash device tables for 5.1 and later machine types. Suggested-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20200629140938.17566-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-24arm/acpi: Add the TPM2.0 device under the DSDTEric Auger
In case it is dynamically instantiated, add the TPM 2.0 device object under the DSDT table in the ACPI namespace. Its HID is MSFT0101 while its current resource settings (CRS) property is initialized with the guest physical address and MMIO size of the device. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200622140620.17229-3-eric.auger@redhat.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09arm/acpi: TPM2 ACPI table supportEric Auger
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been dynamically instantiated. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200601095737.32671-4-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09hw/acpi/nvdimm: add a helper to augment SRAT generationVishal Verma
NVDIMMs can belong to their own proximity domains, as described by the NFIT. In such cases, the SRAT needs to have Memory Affinity structures in the SRAT for these NVDIMMs, otherwise Linux doesn't populate node data structures properly during NUMA initialization. See the following for an example failure case. https://lore.kernel.org/linux-nvdimm/20200416225438.15208-1-vishal.l.verma@intel.com/ Introduce a new helper, nvdimm_build_srat(), and call it for both the i386 and arm versions of 'build_srat()' to augment the SRAT with memory affinity information for NVDIMMs. The relevant command line options to exercise this are below. Nodes 0-1 contain CPUs and regular memory, and nodes 2-3 are the NVDIMM address space. -object memory-backend-ram,id=mem0,size=2048M -numa node,nodeid=0,memdev=mem0, -numa cpu,node-id=0,socket-id=0 -object memory-backend-ram,id=mem1,size=2048M -numa node,nodeid=1,memdev=mem1, -numa cpu,node-id=1,socket-id=1 -numa node,nodeid=2, -object memory-backend-file,id=nvmem0,share,mem-path=nvdimm-0,size=16384M,align=1G -device nvdimm,memdev=nvmem0,id=nv0,label-size=2M,node=2 -numa node,nodeid=3, -object memory-backend-file,id=nvmem1,share,mem-path=nvdimm-1,size=16384M,align=1G -device nvdimm,memdev=nvmem1,id=nv1,label-size=2M,node=3 Cc: Jingqi Liu <jingqi.liu@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jingqi Liu <jingqi.liu@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Message-Id: <20200606000911.9896-3-vishal.l.verma@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-14ACPI: Record the Generic Error Status Block addressDongjiu Geng
Record the GHEB address via fw_cfg file, when recording a error to CPER, it will use this address to find out Generic Error Data Entries and write the error. In order to avoid migration failure, make hardware error table address to a part of GED device instead of global variable, then this address will be migrated to target QEMU. Acked-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14ACPI: Build Hardware Error Source TableDongjiu Geng
This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs. Now it only supports ARMv8 SEA, a type of Generic Hardware Error Source version 2(GHESv2) error source. Afterwards, we can extend the supported types if needed. For the CPER section, currently it is memory section because kernel mainly wants userspace to handle the memory errors. This patch follows the spec ACPI 6.2 to build the Hardware Error Source table. For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst build_ghes_hw_error_notification() helper will help to add Hardware Error Notification to ACPI tables without using packed C structures and avoid endianness issues as API doesn't need explicit conversion. Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-6-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14ACPI: Build related register address fields via hardware error fw_cfg blobDongjiu Geng
This patch builds error_block_address and read_ack_register fields in hardware errors table , the error_block_address points to Generic Error Status Block(GESB) via bios_linker. The max size for one GESB is 1kb, For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst Now we only support one Error source, if necessary, we can extend to support more. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/arm/virt: Add nvdimm hot-plug infrastructureKwangwoo Lee
This adds support to init nvdimm acpi state and build nvdimm acpi tables. Please note nvdimm_support is not yet enabled. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200421125934.14952-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-13acpi: Use macro for table-loader file nameShameer Kolothum
Use macro for "etc/table-loader" and move it to the header file similar to ACPI_BUILD_TABLE_FILE/ACPI_BUILD_RSDP_FILE etc. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200403101827.30664-2-shameerali.kolothum.thodi@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-29acpi: add acpi=OnOffAuto machine property to x86 and arm virtGerd Hoffmann
Remove the global acpi_enabled bool and replace it with an acpi OnOffAuto machine property. qemu throws an error now if you use -no-acpi while the machine type you are using doesn't support acpi in the first place. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200320100136.11717-1-kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-13arm/acpi: simplify the description of PCI _CRSHeyi Guo
The original code defines a named object for the resource template but then returns the resource template object itself; the resulted output is like below: Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum 0x00FF, // Range Maximum 0x0000, // Translation Offset 0x0100, // Length ,, ) ...... }) Return (ResourceTemplate () { WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, 0x0000, // Granularity 0x0000, // Range Minimum 0x00FF, // Range Maximum 0x0000, // Translation Offset 0x0100, // Length ,, ) ...... }) } So the named object "RBUF" is actually useless. The more natural way is to return RBUF instead, or simply drop RBUF definition. Choose the latter one to simplify the code. Signed-off-by: Heyi Guo <guoheyi@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200204014325.16279-7-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13arm/acpi: fix duplicated _UID of PCI interrupt link devicesHeyi Guo
Using _UID of 0 for all PCI interrupt link devices absolutely violates the spec. Simply increase one by one. Signed-off-by: Heyi Guo <guoheyi@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200204014325.16279-6-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13arm/acpi: fix PCI _PRT definitionHeyi Guo
The address field in each _PRT mapping package should be constructed with high word for device# and low word for function#, so it is wrong to use bus_no as the high word. The existing code adds a bunch useless entries with device #s above 31. Enumerate all possible slots (i.e. PCI_SLOT_MAX) instead. Signed-off-by: Heyi Guo <guoheyi@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200204014325.16279-5-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13arm/virt/acpi: remove _ADR from devices identified by _HIDHeyi Guo
According to ACPI spec, _ADR should be used for device on a bus that has a standard enumeration algorithm, but not for device which is on system bus and must be enumerated by OSPM. And it is not recommended to contain both _HID and _ADR in a single device. See ACPI 6.3, section 6.1, top of page 343: A device object must contain either an _HID object or an _ADR object, but should not contain both. (https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf) Signed-off-by: Heyi Guo <guoheyi@huawei.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200204014325.16279-4-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-13arm/virt/acpi: remove meaningless sub device "RP0" from PCI0Heyi Guo
The sub device "RP0" under PCI0 in ACPI/DSDT does not contain any method or property other than "_ADR", so it is safe to remove it. Signed-off-by: Heyi Guo <guoheyi@huawei.com> Acked-by: "Michael S. Tsirkin" <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200204014325.16279-3-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16hw/arm/acpi: enable SHPC native hot plugHeyi Guo
After the introduction of generic PCIe root port and PCIe-PCI bridge, we will also have SHPC controller on ARM, so just enable SHPC native hot plug. Also update tests/data/acpi/virt/DSDT* to pass "make check". Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-id: 20191209063719.23086-3-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16hw/arm/acpi: simplify AML bit and/or statementHeyi Guo
The last argument of AML bit and/or statement is the target variable, so we don't need to use a NULL target and then an additional store operation; using just aml_and() or aml_or() statement is enough. Also update tests/data/acpi/virt/DSDT* to pass "make check". Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-id: 20191209063719.23086-2-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-05hw/arm: Use GED for system_powerdown eventShameer Kolothum
For machines 4.2 or higher with ACPI boot use GED for system_powerdown event instead of GPIO. Guest boot with DT still uses GPIO. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190918130633.4872-9-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-05hw/arm/virt-acpi-build: Add PC-DIMM in SRATShameer Kolothum
Generate Memory Affinity Structures for PC-DIMM ranges. Also, Linux and Windows need ACPI SRAT table to make memory hotplug work properly, however currently QEMU doesn't create SRAT table if numa options aren't present on CLI. Hence add support(>=4.2) to create numa node automatically (auto_enable_numa_with_memhp) when QEMU is started with memory hotplug enabled but without '-numa' options on CLI. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190918130633.4872-7-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-05hw/arm/virt: Enable device memory cold/hot plug with ACPI bootShameer Kolothum
This initializes the GED device with base memory and irq, configures ged memory hotplug event and builds the corresponding aml code. With this, both hot and cold plug of device memory is enabled now for Guest with ACPI boot. Memory cold plug support with Guest DT boot is not yet supported. As DSDT table gets changed by this, update bios-tables-test-allowed-diff.h to avoid "make check" failure. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Message-Id: <20190918130633.4872-6-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-09-03numa: move numa global variable numa_info into MachineStateTao Xu
Move existing numa global numa_info (renamed as "nodes") into NumaState. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-5-tao3.xu@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03numa: move numa global variable have_numa_distance into MachineStateTao Xu
Move existing numa global have_numa_distance into NumaState. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Liu Jingqi <jingqi.liu@intel.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-4-tao3.xu@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-09-03numa: move numa global variable nb_numa_nodes into MachineStateTao Xu
Add struct NumaState in MachineState and move existing numa global nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable numa_support into MachineClass to decide which submachines support NUMA. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-3-tao3.xu@intel.com> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-21hw/core: Move cpu.c, cpu.h from qom/ to hw/core/Markus Armbruster
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190709152053.16670-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h in comments replaced]
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-06-16hw/acpi: extract acpi_add_rom_blob()Wei Yang
arm and i386 has almost the same function acpi_add_rom_blob(), except giving different FWCfgCallback function. This patch moves acpi_add_rom_blob() to utils.c by passing FWCfgCallback to it. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> v7: * rebase on top of current master because of conflict v6: * change author from Igor to Michael v5: * remove unnecessary header glib/gprintf.h * rearrange include header to make it more suitable v4: * extract -> moves * adjust comment in source to make checkpatch happy v3: * put acpi_add_rom_blob() to hw/acpi/utils.c v2: * remove unused header in original source file Message-Id: <20190610011830.28398-1-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-05-29hw/acpi: Consolidate build_mcfg to pci.cWei Yang
Now we have two identical build_mcfg functions. Consolidate them in acpi/pci.c. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> v4: * ACPI_PCI depends on both ACPI and PCI * rebase on latest master, adjust arm Kconfig v3: * adjust changelog based on Igor's suggestion Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20hw/arm/virt-acpi-build: pass AcpiMcfgInfo to build_mcfg()Wei Yang
To build MCFG, two information is necessary: * bus number * base address Abstract these two information to AcpiMcfgInfo so that build_mcfg and build_mcfg_q35 will have the same declaration. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190419003053.8260-5-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20hw/arm/virt-acpi-build: remove unnecessary variable mcfg_startWei Yang
mcfg_start points to the start of MCFG table and is used in build_header. While this information could be derived from mcfg. This patch removes the unnecessary variable mcfg_start. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190419003053.8260-3-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-15hw/arm/virt-acpi-build: use PCIE_MMCFG_BUS to retrieve end_bus_numberWei Yang
This is more proper to use PCIE_MMCFG_BUS to retrieve end_bus_number. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20190312074953.16671-1-richardw.yang@linux.intel.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-15hw/arm/virt-acpi-build: Fix SMMUv3 GSIV valuesEric Auger
The GSIV numbers of the SPI based interrupts is not correct as ARM_SPI_BASE was not added to the irqmap[VIRT_SMMU] value. So this may collide with VIRTIO_MMIO irq window. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20190312091031.5185-1-eric.auger@redhat.com Reviewed-by: Shannon Zhao <shannon.zhaosl@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-05hw/arm/virt: Rename highmem IO regionsEric Auger
In preparation for a split of the memory map into a static part and a dynamic part floating after the RAM, let's rename the regions located after the RAM Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20190304101339.25970-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-21hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 nodeEric Auger
Let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency. Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20190107101041.765-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-19hw: acpi: Export and share the ARM RSDP buildSamuel Ortiz
Now that build_rsdp() supports building both legacy and current RSDP tables, we can move it to a generic folder (hw/acpi) and have the i386 ACPI code reuse it in order to reduce code duplication. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com>
2018-12-19hw: arm: Support both legacy and current RSDP buildSamuel Ortiz
We add the ability to build legacy or current RSDP tables, based on the AcpiRsdpData revision field passed to build_rsdp(). Although arm/virt only uses RSDP v2, adding that capability to build_rsdp will allow us to share the RSDP build code between ARM and x86. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19hw: arm: Convert the RSDP build to the buid_append_foo() APISamuel Ortiz
Instead of filling a mapped and packed C structure field in random order and being careful about endianness and sizes, build_rsdp() now uses build_append_int_noprefix() to compose RSDP table. This makes reviewing and maintaining code easier as this is almost matching 1:1 the ACPI spec itself. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19hw: arm: Carry RSDP specific data through AcpiRsdpDataSamuel Ortiz
That will allow us to generalize the ARM build_rsdp() routine to support both legacy RSDP (The current i386 implementation) and extended RSDP (The ARM implementation). Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19hw: arm: acpi: Fix incorrect checksums in RSDPIgor Mammedov
When RSDP table was introduced (d4bec5d87), we calculated only legacy checksum, and that was incorrect as it - specified rev=2 and forgot about extended checksum. - legacy checksum calculated on full table instead of the 1st 20 bytes Fix it by adding extended checksum calculation and using correct size for legacy checksum. While at it use explicit constants to specify sub/full tables sizes instead of relying on AcpiRsdpDescriptor size and fields offsets. The follow up commits will convert this table to build_append_int_noprefix() API, will use constants anyway and remove unused AcpiRsdpDescriptor structure. Based on "[PATCH v5 05/24] hw: acpi: Implement XSDT support for RSDP" by Samuel Ortiz, who did it right in his impl. Fixes: d4bec5d87 ("hw/arm/virt-acpi-build: Generate RSDP table") Signed-off-by: Igor Mammedov <imammedo@redhat.com> CC: Ard Biesheuvel <ard.biesheuvel@linaro.org> CC: Shannon Zhao <shannon.zhaosl@gmail.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19hw: acpi: The RSDP build API can return voidSamuel Ortiz
For both x86 and ARM architectures, the internal RSDP build API can return void as the current return value is unused. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 19:21:04 +0000