aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/nseries.c
AgeCommit message (Collapse)Author
2024-03-11hw/arm: Deprecate various old Arm machine typesPeter Maydell
QEMU includes some models of old Arm machine types which are a bit problematic for us because: * they're written in a very old way that uses numerous APIs that we would like to get away from (eg they don't use qdev, they use qemu_system_reset_request(), they use vmstate_register(), etc) * they've been that way for a decade plus and nobody particularly has stepped up to try to modernise the code (beyond some occasional work here and there) * we often don't have test cases for them, which means that if we do try to do the necessary refactoring work on them we have no idea if they even still work at all afterwards All these machine types are also of hardware that has largely passed away into history and where I would not be surprised to find that e.g. the Linux kernel support was never tested on real hardware any more. After some consultation with the Linux kernel developers, we are going to deprecate: All PXA2xx machines: akita Sharp SL-C1000 (Akita) PDA (PXA270) borzoi Sharp SL-C3100 (Borzoi) PDA (PXA270) connex Gumstix Connex (PXA255) mainstone Mainstone II (PXA27x) spitz Sharp SL-C3000 (Spitz) PDA (PXA270) terrier Sharp SL-C3200 (Terrier) PDA (PXA270) tosa Sharp SL-6000 (Tosa) PDA (PXA255) verdex Gumstix Verdex Pro XL6P COMs (PXA270) z2 Zipit Z2 (PXA27x) All OMAP2 machines: n800 Nokia N800 tablet aka. RX-34 (OMAP2420) n810 Nokia N810 tablet aka. RX-44 (OMAP2420) One of the OMAP1 machines: cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310) Rationale: * for QEMU dropping individual machines is much less beneficial than if we can drop support for an entire SoC * the OMAP2 QEMU code in particular is large, old and unmaintained, and none of the OMAP2 kernel maintainers said they were using QEMU in any of their testing/development * although there is a setup that is booting test kernels on some of the PXA2xx machines, nobody seemed to be using them as part of their active kernel development and my impression from the email thread is that PXA is the closest of all these SoC families to being dropped from the kernel soon * nobody said they were using cheetah, so it's entirely untested and quite probably broken * on the other hand the OMAP1 sx1 model does seem to be being used as part of kernel development, and there was interest in keeping collie around In particular, the mainstone, tosa and z2 machine types have already been dropped from Linux. Mark all these machine types as deprecated. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240308171621.3749894-1-peter.maydell@linaro.org
2024-01-26hw/arm/nseries: Unconditionally map the TUSB6010 USB Host controllerPhilippe Mathieu-Daudé
The TUSB6010 USB controller is soldered on the N800 and N810 tablets, thus is always present. This is a migration compatibility break for the n800/n810 machines started with the '-usb none' option. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240119215106.45776-3-philmd@linaro.org [PMM: fixed commit message typo] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-10-03hw/arm: Support machine-default audiodev with fallbackMartin Kletzander
Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-22*: Add missing includes of qemu/error-report.hRichard Henderson
This had been pulled in via qemu/plugin.h from hw/core/cpu.h, but that will be removed. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org> [AJB: add various additional cases shown by CI] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org> Reviewed-by: Emilio Cota <cota@braap.org>
2023-01-05hw/arm/nseries: Silent -Wmissing-field-initializers warningPhilippe Mathieu-Daudé
Silent when compiling with -Wextra: ../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers] { NULL } ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221220142520.24094-4-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/nseries: Constify various read-only arraysPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-10-22Drop useless casts from g_malloc() & friends to pointerMarkus Armbruster
These memory allocation functions return void *, and casting to another pointer type is useless clutter. Drop these casts. If you really want another pointer type, consider g_new(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20220923120025.448759-3-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-05-12machine: use QAPI struct for boot configurationPaolo Bonzini
As part of converting -boot to a property with a QAPI type, define the struct and use it throughout QEMU to access boot configuration. machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by hand, for now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220414165300.555321-2-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-21include: Move hardware version declarations to new qemu/hw-version.hPeter Maydell
The "hardware version" machinery (qemu_set_hw_version(), qemu_hw_version(), and the QEMU_HW_VERSION define) is used by fewer than 10 files. Move it out from osdep.h into a new qemu/hw-version.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220208200856.3558249-6-peter.maydell@linaro.org
2021-07-27hw/arm/nseries: Display hexadecimal value with '0x' prefixPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210726150953.1218690-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-08hw/input/lm832x: Define TYPE_LM8323 in public headerPhilippe Mathieu-Daudé
Define TYPE_LM8323 in the public "hw/input/lm832x.h" header and use it in hw/arm/nseries.c. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/input/lm832x: Move lm832x_key_event() declaration to "lm832x.h"Philippe Mathieu-Daudé
lm832x_key_event() is specific go LM832x devices, not to the I2C bus API. Move it out of "i2c.h" to a new header. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-06-17sensor: Move hardware sensors from misc to a sensor directoryCorey Minyard
Lots of this are expected to be coming in, create a directory for them. Also move the tmp105.h file into the include directory where it should be. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cédric Le Goater <clg@kaod.org>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-10hw/arm/nseries: Check return value from load_image_targphys()Peter Maydell
The nseries machines have a codepath that allows them to load a secondary bootloader. This code wasn't checking that the load_image_targphys() succeeded. Check the return value and report the error to the user. While we're in the vicinity, fix the comment style of the comment documenting what this image load is doing. Fixes: Coverity CID 1192904 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201103114918.11807-1-peter.maydell@linaro.org
2020-11-10hw/arm/nseries: Remove invalid/unnecessary n8x0_uart_setup()Philippe Mathieu-Daudé
omap2420_mpu_init() introduced in commit 827df9f3c5f ("Add basic OMAP2 chip support") takes care of creating the 3 UARTs. Then commit 58a26b477e9 ("Emulate a serial bluetooth HCI with H4+ extensions and attach to n8x0's UART") added n8x0_uart_setup() which create the UART and connects it to an IRQ output, overwritting the existing peripheral and its IRQ connection. This is incorrect. Fortunately we don't need to fix this, because commit 6da68df7f9b ("hw/arm/nseries: Replace the bluetooth chardev with a "null" chardev") removed the use of this peripheral. We can simply remove the code. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201107193403.436146-4-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-20hw/arm/nseries: Fix loading kernel image on n8x0 machinesPhilippe Mathieu-Daudé
Commit 7998beb9c2e removed the ram_size initialization in the arm_boot_info structure, however it is used by arm_load_kernel(). Initialize the field to fix: $ qemu-system-arm -M n800 -append 'console=ttyS1' \ -kernel meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0 qemu-system-arm: kernel 'meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0' is too large to fit in RAM (kernel size 1964608, RAM size 0) Noticed while running the test introduced in commit 050a82f0c5b ("tests/acceptance: Add a test for the N800 and N810 arm machines"). Fixes: 7998beb9c2e ("arm/nseries: use memdev for RAM") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Thomas Huth <thuth@redhat.com> Message-id: 20201019095148.1602119-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-16hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()Philippe Mathieu-Daudé
We use "create_simple" names for functions that allocate, initialize, configure and realize device objects: pci_create_simple(), isa_create_simple(), usb_create_simple(). For consistency, rename i2c_create_slave() as i2c_slave_create_simple(). Since we have to update all the callers, also let it return a I2CSlave object. Suggested-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200705224154.16917-5-f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-06-23qdev: Make qdev_prop_set_drive() match the other helpersMarkus Armbruster
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO() can; they abort on error. To clean up this inconsistency, rename qdev_prop_set_drive() to qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that aborts on error. Coccinelle script to update callers: @ depends on !(file in "hw/core/qdev-properties-system.c")@ expression dev, name, value; symbol error_abort; @@ - qdev_prop_set_drive(dev, name, value, &error_abort); + qdev_prop_set_drive(dev, name, value); @@ expression dev, name, value, errp; @@ - qdev_prop_set_drive(dev, name, value, errp); + qdev_prop_set_drive_err(dev, name, value, errp); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-02-19arm/nseries: use memdev for RAMIgor Mammedov
memory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing MachineClass::default_ram_id and using MachineState::ram instead of manually initializing RAM memory region. PS: while at it add check for user supplied RAM size and error out if it mismatches board expected value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-26-imammedo@redhat.com>
2019-12-16hw/arm/nseries: Replace the bluetooth chardev with a "null" chardevThomas Huth
We are going to remove the bitrotten bluetooth backend, so we can not use it in the n800 and n810 machines anymore. Replace the chardev here with a "null" chardev and stop including the "hw/bt.h" header. I am not aware of a full working N8x0 environment that can be used to test these machines, but the Linux kernel from the Meego project that can be found on http://stskeeps.subnetmask.net/meego-n8x0/ still seems to boot as far as it did before. Message-Id: <20191120091014.16883-2-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-10-22hw/arm/omap2: Create the RAM in the boardPhilippe Mathieu-Daudé
The SDRAM is incorrectly created in the OMAP2420 SoC. Move its creation in the board code, this will later allow the board to have the QOM ownership of the RAM. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191021190653.9511-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-03hw/arm: simplify arm_load_dtbTao Xu
In struct arm_boot_info, kernel_filename, initrd_filename and kernel_cmdline are copied from from MachineState. This patch add MachineState as a parameter into arm_load_dtb() and move the copy chunk of kernel_filename, initrd_filename and kernel_cmdline into arm_load_kernel(). Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Liu Jingqi <jingqi.liu@intel.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-2-tao3.xu@intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Cédric Le Goater <clg@kaod.org> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-05-23arm: Rename hw/arm/arm.h to hw/arm/boot.hPeter Maydell
The header file hw/arm/arm.h now includes only declarations relating to hw/arm/boot.c functionality. Rename it accordingly, and adjust its header comment. The bulk of this commit was created via perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h In a few cases we can just delete the #include: hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and include/hw/arm/bcm2836.h did not require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190516163857.6430-4-peter.maydell@linaro.org
2019-04-29hw/devices: Move TI touchscreen declarations into a new headerPhilippe Mathieu-Daudé
Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move CBus declarations into a new headerPhilippe Mathieu-Daudé
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move Blizzard declarations into a new headerPhilippe Mathieu-Daudé
Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded stringPhilippe Mathieu-Daudé
Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-3-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01hw: Do not include "sysemu/block-backend.h" if it is not necessaryPhilippe Mathieu-Daudé
Remove those unneeded includes to speed up the compilation process a little bit. (Continue 7eceff5b5a1fa cleanup) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-13-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-22Replace all occurances of __FUNCTION__ with __func__Alistair Francis
Replace all occurs of __FUNCTION__ except for the check in checkpatch with the non GCC specific __func__. One line in hcd-musb.c was manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> [THH: Removed hunks related to pxa2xx_mmci.c (fixed already)] Signed-off-by: Thomas Huth <thuth@redhat.com>
2017-09-19arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directlyIgor Mammedov
there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-07hw/arm: Set ignore_memory_transaction_failures for most ARM boardsPeter Maydell
Set the MachineClass flag ignore_memory_transaction_failures for almost all ARM boards. This means they retain the legacy behaviour that accesses to unimplemented addresses will RAZ/WI rather than aborting, when a subsequent commit adds support for external aborts. The exceptions are: * virt -- we know that guests won't try to prod devices that we don't describe in the device tree or ACPI tables * mps2 -- this board was written to use unimplemented-device for all the ranges with devices we don't yet handle New boards should not set the flag, but instead be written like the mps2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1504626814-23124-3-git-send-email-peter.maydell@linaro.org For the Xilinx boards: Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-01-27char: rename CharDriverState ChardevMarc-André Lureau
Pick a uniform chardev type name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-08bt-hci-csr: drop unused argumentPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-13vl: Eliminate usb_enabled()Eduardo Habkost
This wrapper for machine_usb(current_machine) is not necessary, replace all usages of usb_enabled() with machine_usb(). Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: qemu-arm@nongnu.org Cc: qemu-ppc@nongnu.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1465419025-21519-3-git-send-email-ehabkost@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-05-19hw: explicitly include qemu/log.hPaolo Bonzini
Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: stop including qemu/bswap.h from qemu-common.hPaolo Bonzini
Move it to the actual users. There are still a few includes of qemu/bswap.h in headers; removing them is left for future work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12hw/arm/nseries: Allocating Large sized arrays to heapZhou Jie
n8x0_init has a huge stack usage of 65536 bytes approx. Moving large arrays to heap to reduce stack usage. Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com> Message-id: 1461651308-894-1-git-send-email-zhoujie2011@cn.fujitsu.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-16machine: Use type_init() to register machine classesEduardo Habkost
Change all machine_init() users that simply call type_register*() to use type_init(). Cc: Evgeny Voevodin <e.voevodin@samsung.com> Cc: Maksim Kozlov <m.kozlov@samsung.com> Cc: Igor Mitsyanko <i.mitsyanko@gmail.com> Cc: Dmitry Solodkiy <d.solodkiy@samsung.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Alexander Graf <agraf@suse.de> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-01-18hw/arm: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1449505425-32022-4-git-send-email-peter.maydell@linaro.org
2016-01-13hw: Inline the qdev_prop_set_drive_nofail() wrapperMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1449764955-10741-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-04osdep: Rename qemu_{get, set}_version() to qemu_{, set_}hw_version()Eduardo Habkost
This makes the purpose of the function clearer: it is not about the version of QEMU that's running, but the version string exposed in the emulated hardware. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: John Snow <jsnow@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446233769-7892-3-git-send-email-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-29 18:52:06 +0000