aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/npcm7xx.c
AgeCommit message (Collapse)Author
2024-05-28hw/arm/npcm7xx: remove setting of mp-affinityDorjoy Chowdhury
The value of the mp-affinity property being set in npcm7xx_realize is always the same as the default value it would have when arm_cpu_realizefn is called if the property is not set here. So there is no need to set the property value in npcm7xx_realize function. Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240504141733.14813-1-dorjoychy111@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-04-30hw/arm/npcm7xx: Store derivative OTP fuse key in little endianPhilippe Mathieu-Daudé
Use little endian for derivative OTP fuse key. Cc: qemu-stable@nongnu.org Fixes: c752bb079b ("hw/nvram: NPCM7xx OTP device model") Suggested-by: Avi Fishman <Avi.Fishman@nuvoton.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240422125813.1403-1-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modulesPeter Maydell
The patchset adding the GMAC ethernet to this SoC crossed in the mail with the patchset cleaning up the NIC handling. When we create the GMAC modules we must call qemu_configure_nic_device() so that the user has the opportunity to use the -nic commandline option to create a network backend and connect it to the GMACs. Add the missing call. Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Message-id: 20240206171231.396392-2-peter.maydell@linaro.org
2024-02-02Merge tag 'pull-target-arm-20240202' of ↵Peter Maydell
https://git.linaro.org/people/pmaydell/qemu-arm into staging target/arm: fix exception syndrome for AArch32 bkpt insn pci, vmbus, adb, s390x/css-bridge: Switch buses to 3-phase reset system/vl.c: Fix handling of '-serial none -serial something' target/arm: Add ID_AA64ZFR0_EL1.B16B16 to the exposed-to-userspace set tests/qtest/xlnx-versal-trng-test.c: Drop use of variable length array target/arm: Reinstate "vfp" property on AArch32 CPUs doc/sphinx/hxtool.py: add optional label argument to SRST directive hw/arm: Check for CPU types in machine_run_board_init() for various boards pci-host: designware: Limit value range of iATU viewport register hw/arm: Convert some DPRINTF macros to trace events and guest errors hw/arm: NPCM7XX SoC: Add GMAC ethernet controller devices hw/arm: Implement BCM2835 SPI Controller # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmW9C84ZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3qS6D/wM0/JGEYfaadpuMEOAx4PG # AnfScbPqVhx9J31P2Ks3VrB5F108aq/SaL2BmCb3BLF/ECChlhBXIjd7ukdHstts # F1TvqtvLGDZQz6wSVUeB0YOvAjGa3vIskn+Xvk9e6Ne6PcXgVnxAof/cPsXUiYNy # 6DJjNiLJ/a9Xgq9rjFO6vzW3AL95U6/FmD2F0pOotWXERhNhoyYVV6RtyeqKlDQP # yFVk5h601YURk9PeNZn9zpOpZqjAM7PxyF3X50N3Sv+G0uoKSr6b+c3/fDJbJo3+ # 0LXomEa8hdheQxm1dLY5OD0JX3bvYxwH41bDg9B0iEdjxUdXt6LfXI9Nvw9BAwix # 8AcGJJUaL4XU4uPfHBpRJApM15+MRb0hqfv4ZcGk8e67IIqVeDbKL2clTQGoHSg1 # KaB0POhtFx//M/uBOyk/FR2gb2eBNU8GuoCgxdDwh0K5ylcaK1YPiX4Tcglu4iS0 # Frvazphb2pO1BK6JiJwN2/9ezzDkDJqTKoSqdc4g3ETVOGnxr+tXwcds3t2iK3g2 # y+pgijDOAT3bJO5kYeGvhoEJPKqXwJ3UQ8zTJsU2XSYwBjIyv5V3oOn6elwYJaWq # yUDTC3QEK61KfnQnfTyLfdGWX1aVzHnYLWmQdO+3cczuQU0s0MP246Z1GAgDtgvD # jGjDBz6mryWvP2H0xSmERQ== # =azdP # -----END PGP SIGNATURE----- # gpg: Signature made Fri 02 Feb 2024 15:35:42 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240202' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits) hw/arm: Connect SPI Controller to BCM2835 hw/ssi: Implement BCM2835 SPI Controller tests/qtest: Adding PCS Module test to GMAC Qtest hw/net: GMAC Tx Implementation hw/net: GMAC Rx Implementation tests/qtest: Creating qtest for GMAC Module hw/arm: Add GMAC devices to NPCM7XX SoC hw/net: Add NPCMXXX GMAC device hw/xen: convert stderr prints to error/warn reports hw/xen/xen-hvm-common.c: convert DPRINTF to tracepoints hw/xen/xen-mapcache.c: convert DPRINTF to tracepoints hw/arm/xen_arm.c: convert DPRINTF to trace events and error/warn reports hw/arm/z2: convert DPRINTF to trace events and guest errors hw/arm/strongarm.c: convert DPRINTF to trace events and guest errors pci-host: designware: Limit value range of iATU viewport register hw/arm/zynq: Check for CPU types in machine_run_board_init() hw/arm/vexpress: Check for CPU types in machine_run_board_init() hw/arm/npcm7xx_boards: Simplify setting MachineClass::valid_cpu_types[] hw/arm/musca: Simplify setting MachineClass::valid_cpu_types[] hw/arm/msf2: Simplify setting MachineClass::valid_cpu_types[] ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm/npcm7xx: use qemu_configure_nic_device, allow emc0/emc1 as aliasesDavid Woodhouse
Also update the test to specify which device to attach the test socket to, and remove the comment lamenting the fact that we can't do so. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/arm: Add GMAC devices to NPCM7XX SoCHao Wu
Change-Id: Id8a3461fb5042adc4c3fd6f4fbd1ca0d33e22565 Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Nabih Estefan <nabihestefan@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Message-id: 20240131002800.989285-3-nabihestefan@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-26target/arm: Move ARM_CPU_IRQ/FIQ definitions to 'cpu-qom.h' headerPhilippe Mathieu-Daudé
The ARM_CPU_IRQ/FIQ definitions are used to index the GPIO IRQ created calling qdev_init_gpio_in() in ARMCPU instance_init() handler. To allow non-ARM code to raise interrupt on ARM cores, move they to 'target/arm/cpu-qom.h' which is non-ARM specific and can be included by any hw/ file. File list to include the new header generated using: $ git grep -wEl 'ARM_CPU_(\w*IRQ|FIQ)' Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240118200643.29037-18-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-26target/arm: Rename arm_cpu_mp_affinityRichard Henderson
Rename to arm_build_mp_affinity. This frees up the name for other usage, and emphasizes that the cpu object is not involved. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240118200643.29037-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-16hw/arm: Attach PSPI module to NPCM7XX SoCHao Wu
Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org> Message-id: 20230208235433.3989937-4-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-08hw/arm/boot: Drop nb_cpus field from arm_boot_infoPeter Maydell
We use the arm_boot_info::nb_cpus field in only one place, and that place can easily get the number of CPUs locally rather than relying on the board code to have set the field correctly. (At least one board, xlnx-versal-virt, does not set the field despite having more than one CPU.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20220127154639.2090164-16-peter.maydell@linaro.org
2021-11-02hw/arm: Add Nuvoton SD module to boardShengtan Mao
Signed-off-by: Shengtan Mao <stmao@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20211008002628.1958285-3-wuhaotsh@google.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-12hw/arm: Add MFT device to NPCM7xx SocHao Wu
This patch adds the recently implemented MFT device to the NPCM7XX SoC file. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-4-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-05hw/arm: Add npcm7xx emc modelDoug Evans
This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210218212453.831406-3-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16hw/i2c: Implement NPCM7XX SMBus Module Single ModeHao Wu
This commit implements the single-byte mode of the SMBus. Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses compliant with SMBus and I2C protocol. This patch implements the single-byte mode of the SMBus. In this mode, the user sends or receives a byte each time. The SMBus device transmits it to the underlying i2c device and sends an interrupt back to the QEMU guest. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-2-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-11hw/arm: Remove GPIO from unimplemented NPCM7XXHao Wu
NPCM7XX GPIO devices have been implemented in hw/gpio/npcm7xx-gpio.c. So we removed them from the unimplemented devices list. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu<wuhaotsh@google.com> Message-id: 20210129005845.416272-2-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-12hw/misc: Add a PWM module for NPCM7XXHao Wu
The PWM module is part of NPCM7XX module. Each NPCM7XX module has two identical PWM modules. Each module contains 4 PWM entries. Each PWM has two outputs: frequency and duty_cycle. Both are computed using inputs from software side. This module does not model detail pulse signals since it is expensive. It also does not model interrupts and watchdogs that are dependant on the detail models. The interfaces for these are left in the module so that anyone in need for these functionalities can implement on their own. The user can read the duty cycle and frequency using qom-get command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-5-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-12hw/adc: Add an ADC module for NPCM7XXHao Wu
The ADC is part of NPCM7XX Module. Its behavior is controled by the ADC_CON register. It converts one of the eight analog inputs into a digital input and stores it in the ADC_DATA register when enabled. Users can alter input value by using qom-set QMP command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-4-wuhaotsh@google.com [PMM: Added missing hw/adc/trace.h file] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-12hw/timer: Refactor NPCM7XX Timer to use CLK clockHao Wu
This patch makes NPCM7XX Timer to use a the timer clock generated by the CLK module instead of the magic number TIMER_REF_HZ. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/gpio: Add GPIO model for Nuvoton NPCM7xxHavard Skinnemoen
The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/arm/npcm7xx: Add EHCI and OHCI controllersHavard Skinnemoen
The NPCM730 and NPCM750 chips have a single USB host port shared between a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This adds support for both of them. Testing notes: * With -device usb-kbd, qemu will automatically insert a full-speed hub, and the keyboard becomes controlled by the OHCI controller. * With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly attached to the port without any hubs, and the device becomes controlled by the EHCI controller since it's high speed capable. * With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the keyboard is directly attached to the port, but it only advertises itself as full-speed capable, so it becomes controlled by the OHCI controller. In all cases, the keyboard device enumerates correctly. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc: Add npcm7xx random number generatorHavard Skinnemoen
The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/timer: Adding watchdog for NPCM7XX Timer.Hao Wu
The watchdog is part of NPCM7XX's timer module. Its behavior is controlled by the WTCR register in the timer. When enabled, the watchdog issues an interrupt signal after a pre-set amount of cycles, and issues a reset signal shortly after that. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: deleted blank line at end of npcm_watchdog_timer-test.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm/npcm7xx: add board setup stub for CPU and UART clocksHavard Skinnemoen
When booting directly into a kernel, bypassing the boot loader, the CPU and UART clocks are not set up correctly. This makes the system appear very slow, and causes the initrd boot test to fail when optimization is off. The UART clock must run at 24 MHz. The default 25 MHz reference clock cannot achieve this, so switch to PLL2/2 @ 480 MHz, which works perfectly with the default /20 divider. The CPU clock should run at 800 MHz, so switch it to PLL1/2. PLL1 runs at 800 MHz by default, so we need to double the feedback divider as well to make it run at 1600 MHz (so PLL1/2 runs at 800 MHz). We don't bother checking for PLL lock because we know our emulated PLLs lock instantly. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-13-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/ssi: NPCM7xx Flash Interface Unit device modelHavard Skinnemoen
This implements a device model for the NPCM7xx SPI flash controller. Direct reads and writes, and user-mode transactions have been tested in various modes. Protection features are not implemented yet. All the FIU instances are available in the SoC's address space, regardless of whether or not they're connected to actual flash chips. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-11-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/mem: Stubbed out NPCM7xx Memory Controller modelHavard Skinnemoen
This just implements the bare minimum to cause the boot block to skip memory initialization. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-10-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/nvram: NPCM7xx OTP device modelHavard Skinnemoen
This supports reading and writing OTP fuses and keys. Only fuse reading has been tested. Protection is not implemented. Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-9-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Add NPCM730 and NPCM750 SoC modelsHavard Skinnemoen
The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>