aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/aspeed_ast2600.c
AgeCommit message (Collapse)Author
2020-02-13hw/arm: ast2600: Wire up EHCI controllersGuenter Roeck
Initialize EHCI controllers on AST2600 using the existing TYPE_PLATFORM_EHCI. After this change, booting ast2600-evb into Linux successfully instantiates a USB interface after the necessary changes are made to its devicetree files. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-platform: EHCI generic platform driver ehci-platform 1e6a3000.usb: EHCI Host Controller ehci-platform 1e6a3000.usb: new USB bus registered, assigned bus number 1 ehci-platform 1e6a3000.usb: irq 25, io mem 0x1e6a3000 ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00 usb usb1: Manufacturer: Linux 5.5.0-09825-ga0802f2d0ef5-dirty ehci_hcd usb 1-1: new high-speed USB device number 2 using ehci-platform Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200207174548.9087-1-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/arm: ast2600: Wire up the eMMC controllerAndrew Jeffery
Initialise another SDHCI model instance for the AST2600's eMMC controller and use the SDHCI's num_slots value introduced previously to determine whether we should create an SD card instance for the new slot. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-3-clg@kaod.org [ clg : - removed ternary operator from sdhci_attach_drive() - renamed SDHCI objects with a '-controller' prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/sd: Configure number of slots exposed by the ASPEED SDHCI modelAndrew Jeffery
The AST2600 includes a second cut-down version of the SD/MMC controller found in the AST2500, named the eMMC controller. It's cut down in the sense that it only supports one slot rather than two, but it brings the total number of slots supported by the AST2600 to three. The existing code assumed that the SD controller always provided two slots. Rework the SDHCI object to expose the number of slots as a property to be set by the SoC configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-2-clg@kaod.org [PMM: fixed up to use device_class_set_props()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20ast2600: Configure CNTFRQ at 1125MHzAndrew Jeffery
This matches the configuration set by u-boot on the AST2600. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 080ca1267a09381c43cf3c50d434fb6c186f2b6e.1576215453.git-series.andrew@aj.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Change the "nic" property definitionCédric Le Goater
The Aspeed MII model has a link pointing to its associated FTGMAC100 NIC in the machine. Change the "nic" property definition so that it explicitly sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-18-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Change the "scu" property definitionCédric Le Goater
The Aspeed Watchdog and Timer models have a link pointing to the SCU controller model of the machine. Change the "scu" property definition so that it explicitly sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-17-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed/i2c: Add support for DMA transfersCédric Le Goater
The I2C controller of the Aspeed AST2500 and AST2600 SoCs supports DMA transfers to and from DRAM. A pair of registers defines the buffer address and the length of the DMA transfer. The address should be aligned on 4 bytes and the maximum length should not exceed 4K. The receive or transmit DMA transfer can then be initiated with specific bits in the Command/Status register of the controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Add a DRAM memory region at the SoC levelCédric Le Goater
Currently, we link the DRAM memory region to the FMC model (for DMAs) through a property alias at the SoC level. The I2C model will need a similar region for DMA support, add a DRAM region property at the SoC level for both model to use. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed/soc: Add ASPEED Video stubJoel Stanley
Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-24-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed: add support for the Aspeed MII controller of the AST2600Cédric Le Goater
The AST2600 SoC has an extra controller to set the PHY registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-23-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed: Parameterise number of MACsJoel Stanley
To support the ast2600's four MACs allow SoCs to specify the number they have, and create that many. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-22-clg@kaod.org [clg: - included a check on sc->macs_num when realizing the macs - included interrupt definitions for the AST2600 ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed/soc: Add AST2600 supportCédric Le Goater
Initial definitions for a simple machine using an AST2600 SoC (Cortex CPU). The Cortex CPU and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new Aspeed SoC class with instance_init and realize handlers to handle the differences with the AST2400 and the AST2500 SoCs. This will add extra work to keep in sync both models with future extensions but it makes the code clearer. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-19-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-12 17:07:35 +0000