aboutsummaryrefslogtreecommitdiff
path: root/hw/arm/aspeed.c
AgeCommit message (Collapse)Author
2020-06-15qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster
All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
2020-06-15qom: Less verbose object_initialize_child()Markus Armbruster
All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-15qom: Tidy up a few object_initialize_child() callsMarkus Armbruster
The callers of object_initialize_child() commonly pass either &child, sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that don't, mostly to keep the next commit simpler. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-36-armbru@redhat.com>
2020-06-15ssi: Convert uses of ssi_create_slave_no_init() with CoccinelleMarkus Armbruster
Replace dev = ssi_create_slave_no_init(bus, type_name); ... qdev_init_nofail(dev); by dev = qdev_new(type_name); ... qdev_realize_and_unref(dev, bus, &error_fatal); Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. @@ type SSIBus; identifier bus; expression dev, qbus, expr; expression list args; @@ - bus = (SSIBus *)qbus; + bus = qbus; // TODO fix up decl ... - dev = ssi_create_slave_no_init(bus, args); + dev = qdev_new(args); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = ssi_create_slave_no_init(bus, args); + dev = qdev_new(args); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, BUS(bus), &error_fatal); Bus declarations fixed up manually. Cc: Alistair Francis <alistair@alistair23.me> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-24-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15arm/aspeed: Rework NIC attachmentCédric Le Goater
The number of MACs supported by an Aspeed SoC is defined by "macs_num" under the SoC model, that is two for the AST2400 and AST2500 and four for the AST2600. The model initializes the maximum number of supported MACs but the number of realized devices is capped by the number of network device back-ends defined on the command line. This can leave unrealized devices hanging around in the QOM composition tree. To get virtual hardware that matches the physical hardware, you have to pass exactly as many -nic options as there are MACs, and some of them must be -nic none: * Machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc: two -nic, and the second one must be -nic none. * Machine ast2600-evb: four -nic, the first one must be -nic none. * Machine tacoma-bmc: four nic, the first two and the last one must be -nic none. Modify the machine initialization to define which MACs are attached to a network device back-end using a bit-field property "macs-mask" and let the SoC realize all network devices. The default setting of "macs-mask" is "use MAC0" only, which works for all our AST2400 and AST2500 machines. The AST2600 machines have different configurations. The AST2600 EVB machine activates MAC1, MAC2 and MAC3 and the Tacoma BMC machine activates MAC2. Incompatible CLI change: -nic options now apply to *active* MACs: MAC1, MAC2, MAC3 for ast2600-evb, MAC2 for tacoma-bmc, and MAC0 for all the others. The machines now always get all MACs as they should. Visible in "info qom-tree", here's the change for tacoma-bmc: /machine (tacoma-bmc-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) [...] /ftgmac100[0] (ftgmac100) /ftgmac100[0] (qemu:memory-region) /ftgmac100[1] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) /ftgmac100[2] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) /ftgmac100[3] (ftgmac100) + /ftgmac100[0] (qemu:memory-region) [...] /mii[0] (aspeed-mmi) /aspeed-mmi[0] (qemu:memory-region) /mii[1] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) /mii[2] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) /mii[3] (aspeed-mmi) + /aspeed-mmi[0] (qemu:memory-region) Also visible in "info qtree"; here's the change for tacoma-bmc: dev: ftgmac100, id "" gpio-out "sysbus-irq" 1 aspeed = true - mac = "52:54:00:12:34:56" - netdev = "hub0port0" + mac = "52:54:00:12:34:57" + netdev = "" mmio 000000001e660000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:58" netdev = "" + mmio 000000001e680000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" - netdev = "" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:56" + netdev = "hub0port0" + mmio 000000001e670000/0000000000002000 dev: ftgmac100, id "" - aspeed = false - mac = "00:00:00:00:00:00" + gpio-out "sysbus-irq" 1 + aspeed = true + mac = "52:54:00:12:34:59" netdev = "" + mmio 000000001e690000/0000000000002000 [...] dev: aspeed-mmi, id "" mmio 000000001e650000/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650008/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650010/0000000000000008 dev: aspeed-mmi, id "" + mmio 000000001e650018/0000000000000008 Inactive MACs will have no peer and QEMU may warn the user with : qemu-system-arm: warning: nic ftgmac100.0 has no peer qemu-system-arm: warning: nic ftgmac100.1 has no peer qemu-system-arm: warning: nic ftgmac100.3 has no peer Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-6-armbru@redhat.com>
2020-06-15arm/aspeed: Compute the number of CPUs from the SoC definitionCédric Le Goater
Commit ece09beec457 ("aspeed: introduce a configurable number of CPU per machine") was a convient change during bringup but the Aspeed SoCs have a fixed number of CPUs : one for the AST2400 and AST2500, and two for the AST2600. When the number of CPUs configured with -smp is less than the SoC's fixed number, the "unconfigured" CPUs are left unrealized. This can happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed number is 2. To get virtual hardware that matches the physical hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2). We normally reject -smp cpus=N when N exceeds the machine's limit. Except we ignore cpus=2 (and only cpus=2) with a warning for machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and witherspoon-bmc. Remove the "num-cpu" property from the SoC state and use the fixed number of CPUs defined in the SoC class instead. Compute the default, min, max number of CPUs of the machine directly from the SoC class definition. Machines ast2600-evb and tacoma-bmc now always get their second CPU as they should. Visible in "info qom-tree"; here's the change for ast2600-evb: /machine (ast2600-evb-machine) /peripheral (container) /peripheral-anon (container) /soc (ast2600-a1) /a7mpcore (a15mpcore_priv) /a15mp-priv-container[0] (qemu:memory-region) /gic (arm_gic) /gic_cpu[0] (qemu:memory-region) /gic_cpu[1] (qemu:memory-region) + /gic_cpu[2] (qemu:memory-region) /gic_dist[0] (qemu:memory-region) /gic_vcpu[0] (qemu:memory-region) /gic_viface[0] (qemu:memory-region) /gic_viface[1] (qemu:memory-region) + /gic_viface[2] (qemu:memory-region) /unnamed-gpio-in[0] (irq) [...] + /unnamed-gpio-in[160] (irq) [same for 161 to 190...] + /unnamed-gpio-in[191] (irq) Also visible in "info qtree"; here's the change for ast2600-evb: bus: main-system-bus type System dev: a15mpcore_priv, id "" gpio-in "" 128 - gpio-out "sysbus-irq" 5 - num-cpu = 1 (0x1) + gpio-out "sysbus-irq" 10 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) mmio 0000000040460000/0000000000008000 dev: arm_gic, id "" - gpio-in "" 160 - num-cpu = 1 (0x1) + gpio-in "" 192 + num-cpu = 2 (0x2) num-irq = 160 (0xa0) revision = 2 (0x2) has-security-extensions = true has-virtualization-extensions = true num-priority-bits = 8 (0x8) mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000001000 mmio ffffffffffffffff/0000000000002000 mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000100 + mmio ffffffffffffffff/0000000000000200 mmio ffffffffffffffff/0000000000000200 The other machines now reject -smp cpus=2 just like -smp cpus=3 and up. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message expanded] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200609122339.937862-5-armbru@redhat.com>
2020-06-09hw/arm/aspeed: Correct DRAM container region sizePhilippe Mathieu-Daudé
memory_region_set_size() handle the 16 Exabytes limit by special-casing the UINT64_MAX value. This is not a problem for the 32-bit maximum, 4 GiB. By using the UINT32_MAX value, the aspeed-ram-container MemoryRegion ends up missing 1 byte: $ qemu-system-arm -M ast2600-evb -S -monitor stdio (qemu) info mtree address-space: aspeed.fmc-ast2600-dma-dram 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000bfffffff (prio 0, ram): ram 00000000c0000000-ffffffffffffffff (prio 0, i/o): max_ram Fix by using the correct value. We now have: address-space: aspeed.fmc-ast2600-dma-dram 0000000080000000-000000017fffffff (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000bfffffff (prio 0, ram): ram 00000000c0000000-ffffffffffffffff (prio 0, i/o): max_ram Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200601142930.29408-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-15qom: Drop object_property_set_description() parameter @errpMarkus Armbruster
object_property_set_description() and object_class_property_set_description() fail only when property @name is not found. There are 85 calls of object_property_set_description() and object_class_property_set_description(). None of them can fail: * 84 immediately follow the creation of the property. * The one in spapr_rng_instance_init() refers to a property created in spapr_rng_class_init(), from spapr_rng_properties[]. Every one of them still gets to decide what to pass for @errp. 51 calls pass &error_abort, 32 calls pass NULL, one receives the error and propagates it to &error_abort, and one propagates it to &error_fatal. I'm actually surprised none of them violates the Error API. What are we gaining by letting callers handle the "property not found" error? Use when the property is not known to exist is simpler: you don't have to guard the call with a check. We haven't found such a use in 5+ years. Until we do, let's make life a bit simpler and drop the @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-8-armbru@redhat.com> [One semantic rebase conflict resolved]
2020-05-14aspeed: Add support for the sonorapass-bmc boardPatrick Williams
Sonora Pass is a 2 socket x86 motherboard designed by Facebook and supported by OpenBMC. Strapping configuration was obtained from hardware and i2c configuration is based on dts found at: https://github.com/facebook/openbmc-linux/blob/1633c87b8ba7c162095787c988979b748ba65dc8/arch/arm/boot/dts/aspeed-bmc-facebook-sonorapass.dts Booted a test image of http://github.com/facebook/openbmc to login prompt. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Amithash Prasad <amithash@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [PMM: fixed block comment style nit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11aspeed: Support AST2600A1 silicon revisionJoel Stanley
There are minimal differences from Qemu's point of view between the A0 and A1 silicon revisions. As the A1 exercises different code paths in u-boot it is desirable to emulate that instead. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200504093703.261135-1-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11aspeed: Add boot stub for smp bootingJoel Stanley
This is a boot stub that is similar to the code u-boot runs, allowing the kernel to boot the secondary CPU. u-boot works as follows: 1. Initialises the SMP mailbox area in the SCU at 0x1e6e2180 with default values 2. Copies a stub named 'mailbox_insn' from flash to the SCU, just above the mailbox area 3. Sets AST_SMP_MBOX_FIELD_READY to a magic value to indicate the secondary can begin execution from the stub 4. The stub waits until the AST_SMP_MBOX_FIELD_GOSIGN register is set to a magic value 5. Jumps to the address in AST_SMP_MBOX_FIELD_ENTRY, starting Linux Linux indicates it is ready by writing the address of its entrypoint function to AST_SMP_MBOX_FIELD_ENTRY and the 'go' magic number to AST_SMP_MBOX_FIELD_GOSIGN. The secondary CPU sees this at step 4 and breaks out of it's loop. To be compatible, a fixed qemu stub is loaded into the mailbox area. As qemu can ensure the stub is loaded before execution starts, we do not need to emulate the AST_SMP_MBOX_FIELD_READY behaviour of u-boot. The secondary CPU's program counter points to the beginning of the stub, allowing qemu to start secondaries at step four. Reboot behaviour is preserved by resetting AST_SMP_MBOX_FIELD_GOSIGN when the secondaries are reset. This is only configured when the system is booted with -kernel and qemu does not execute u-boot first. Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-19arm/aspeed: use memdev for RAMIgor Mammedov
memory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing MachineClass::default_ram_id and using MachineState::ram instead of manually initializing RAM memory region. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-11-imammedo@redhat.com>
2020-02-19arm/aspeed: actually check RAM sizeIgor Mammedov
It's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to map RAM MemoryReging with valid size. It isn't doing so, since check is called only indirectly from aspeed_sdmc_reset()->asc->compute_conf() or much later when guest writes to configuration register. So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples: -M ast2500-evb -m 1M 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-00000000800fffff (prio 0, ram): ram 0000000080100000-00000000bfffffff (prio 0, i/o): max_ram -M ast2500-evb -m 3G 0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container 0000000080000000-000000013fffffff (prio 0, ram): ram [DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram ) On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have. This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC.ram-size is set so user will have to fix RAM size on CLI to start machine. It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
2020-01-30hw/arm/aspeed: add a 'execute-in-place' property to boot directly from CE0Cédric Le Goater
The overhead for the OpenBMC firmware images using the a custom U-Boot is around 2 seconds, which is fine, but with a U-Boot from mainline, it takes an extra 50 seconds or so to reach Linux. A quick survey on the number of reads performed on the flash memory region gives the following figures : OpenBMC U-Boot 922478 (~ 3.5 MBytes) Mainline U-Boot 20569977 (~ 80 MBytes) QEMU must be trashing the TCG TBs and reloading text very often. Some addresses are read more than 250.000 times. Until we find a solution to improve boot time, execution from MMIO is not activated by default. Setting this option also breaks migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200114103433.30534-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/arm: ast2600: Wire up the eMMC controllerAndrew Jeffery
Initialise another SDHCI model instance for the AST2600's eMMC controller and use the SDHCI's num_slots value introduced previously to determine whether we should create an SD card instance for the new slot. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-3-clg@kaod.org [ clg : - removed ternary operator from sdhci_attach_drive() - renamed SDHCI objects with a '-controller' prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/sd: Configure number of slots exposed by the ASPEED SDHCI modelAndrew Jeffery
The AST2600 includes a second cut-down version of the SD/MMC controller found in the AST2500, named the eMMC controller. It's cut down in the sense that it only supports one slot rather than two, but it brings the total number of slots supported by the AST2600 to three. The existing code assumed that the SD controller always provided two slots. Rework the SDHCI object to expose the number of slots as a property to be set by the SoC configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-2-clg@kaod.org [PMM: fixed up to use device_class_set_props()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Add support for the tacoma-bmc boardCédric Le Goater
The Tacoma BMC board is replacement board for the BMC of the OpenPOWER Witherspoon system. It uses a AST2600 SoC instead of a AST2500 and the I2C layout is the same as it controls the same main board. Used for HW bringup. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Remove AspeedBoardConfig array and use AspeedMachineClassCédric Le Goater
AspeedBoardConfig is a redundant way to define class attributes and it complexifies the machine definition and initialization. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-14-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24aspeed: Add an AST2600 eval boardCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20191023130455.1347-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed: Introduce an object class per SoCCédric Le Goater
It prepares ground for the AST2600. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-18-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15hw/sd/aspeed_sdhci: New deviceEddie James
The Aspeed SOCs have two SD/MMC controllers. Add a device that encapsulates both of these controllers and models the Aspeed-specific registers and behavior. Tested by reading from mmcblk0 in Linux: qemu-system-arm -machine romulus-bmc -nographic \ -drive file=flash-romulus,format=raw,if=mtd \ -device sd-card,drive=sd0 -drive file=_tmp/kernel,format=raw,if=sd,id=sd0 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-3-clg@kaod.org [clg: - changed the controller MMIO window size to 0x1000 - moved the MMIO mapping of the SDHCI slots at the SoC level - merged code to add SD drives on the SD buses at the machine level ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Add support for DMAsCédric Le Goater
The FMC controller on the Aspeed SoCs support DMA to access the flash modules. It can operate in a normal mode, to copy to or from the flash module mapping window, or in a checksum calculation mode, to evaluate the best clock settings for reads. The model introduces two custom address spaces for DMAs: one for the AHB window of the FMC flash devices and one for the DRAM. The latter is populated using a "dram" link set from the machine with the RAM container region. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190904070506.1052-6-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-03hw/arm: simplify arm_load_dtbTao Xu
In struct arm_boot_info, kernel_filename, initrd_filename and kernel_cmdline are copied from from MachineState. This patch add MachineState as a parameter into arm_load_dtb() and move the copy chunk of kernel_filename, initrd_filename and kernel_cmdline into arm_load_kernel(). Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Liu Jingqi <jingqi.liu@intel.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-2-tao3.xu@intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Cédric Le Goater <clg@kaod.org> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-07-05hw/arm: Replace global smp variables with machine smp propertiesLike Xu
The global smp variables in arm are replaced with smp machine properties. The init_cpus() and *_create_rpu() are refactored to pass MachineState. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-9-like.xu@linux.intel.com> [ehabkost: Fix hw/arm/sbsa-ref.c and hw/arm/aspeed.c] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-01aspeed: Add support for the swift-bmc boardAdriana Kobylak
The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-20-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed: add a RAM memory region containerCédric Le Goater
The RAM memory region is defined after the SoC is realized when the SDMC controller has checked that the defined RAM size for the machine is correct. This is problematic for controller models requiring a link on the RAM region, for DMA support in the SMC controller for instance. Introduce a container memory region for the RAM that we can link into the controllers early, before the SoC is realized. It will be populated with the RAM region after the checks have be done. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-14-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed: remove the "ram" linkCédric Le Goater
It has never been used as far as I can tell from the git history. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-13-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed: introduce a configurable number of CPU per machineCédric Le Goater
The current models of the Aspeed SoCs only have one CPU but future ones will support SMP. Introduce a new num_cpus field at the SoC class level to define the number of available CPUs per SoC and also introduce a 'num-cpus' property to activate the CPUs configured for the machine. The max_cpus limit of the machine should depend on the SoC definition but, unfortunately, these values are not available when the machine class is initialized. This is the reason why we add a check on num_cpus in the AspeedSoC realize handler. SMP support will be activated when models for such SoCs are implemented. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed: add a per SoC mapping for the memory spaceCédric Le Goater
This will simplify the definition of new SoCs, like the AST2600 which should use a slightly different address space and have a different set of controllers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-05-24hw/arm/aspeed: Use object_initialize_child for correct ref. countingPhilippe Mathieu-Daudé
As explained in commit aff39be0ed97: Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. This patch was generated using the following Coccinelle script (with a bit of manual fix-up for overly long lines): @use_object_initialize_child@ expression parent_obj; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, &error_abort, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), NULL); ... ?- object_unref(OBJECT(child_ptr)); | - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, errp, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), errp); ... ?- object_unref(OBJECT(child_ptr)); ) @use_sysbus_init_child_obj@ expression parent_obj; expression dev; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize_child(parent_obj, child_name, child_ptr, child_size, - child_type, errp, NULL); + sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size, + child_type); ... - qdev_set_parent_bus(DEVICE(child_ptr), sysbus_get_default()); | - object_initialize_child(parent_obj, child_name, child_ptr, child_size, - child_type, errp, NULL); + sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size, + child_type); - dev = DEVICE(child_ptr); - qdev_set_parent_bus(dev, sysbus_get_default()); ) While the object_initialize() function doesn't take an 'Error *errp' argument, the object_initialize_child() does. Since this code is used when a machine is created (and is not yet running), we deliberately choose to use the &error_abort argument instead of ignoring errors if an object creation failed. This choice also matches when using sysbus_init_child_obj(), since its code is: void sysbus_init_child_obj(Object *parent, const char *childname, void *child, size_t childsize, const char *childtype) { object_initialize_child(parent, childname, child, childsize, childtype, &error_abort, NULL); qdev_set_parent_bus(DEVICE(child), sysbus_get_default()); } Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Inspired-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20190507163416.24647-8-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-23arm: Rename hw/arm/arm.h to hw/arm/boot.hPeter Maydell
The header file hw/arm/arm.h now includes only declarations relating to hw/arm/boot.c functionality. Rename it accordingly, and adjust its header comment. The bulk of this commit was created via perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h In a few cases we can just delete the #include: hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and include/hw/arm/bcm2836.h did not require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190516163857.6430-4-peter.maydell@linaro.org
2019-05-07arm: aspeed: Set SDRAM sizeJoel Stanley
We currently use Qemu's default of 128MB. As we know how much ram each machine ships with, make it easier on users by setting a default. It can still be overridden with -m on the command line. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190503022958.1394-1-joel@jms.id.au Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded stringPhilippe Mathieu-Daudé
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-27i2c: Split smbus into partsCorey Minyard
smbus.c and smbus.h had device side code, master side code, and smbus.h has some smbus_eeprom.c definitions. Split them into separate files. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-11-28hw/arm/aspeed: Fix build issue with clang 3.4Thomas Huth
When using clang 3.4.2, compilation of QEMU fails like this: CC aarch64-softmmu/hw/arm/aspeed.o hw/arm/aspeed.c:36:3: error: redefinition of typedef 'AspeedBoardState' is a C11 feature [-Werror,-Wtypedef-redefinition] } AspeedBoardState; ^ include/hw/arm/aspeed.h:14:33: note: previous definition is here typedef struct AspeedBoardState AspeedBoardState; ^ 1 error generated. make[1]: *** [hw/arm/aspeed.o] Error 1 make: *** [subdir-aarch64-softmmu] Error 2 Remove the duplicated typedef to fix this issue. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 1543397736-8198-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25hw/arm/aspeed: Add an Aspeed machine classCédric Le Goater
The code looks better, it removes duplicated lines and it will ease the introduction of common properties for the Aspeed machines. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180921161939.822-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25hw/arm/aspeed: change the FMC flash model of the AST2500 evbCédric Le Goater
The AST2500 evb is shipped with a W25Q256 which has a non volatile bit to make the chip operate in 4 Byte address mode at power up. This should be an interesting feature to model as it will exercise a bit more the SMC controllers and MMIO execution at boot time. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180921161939.822-3-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-16aspeed: add a max_ram_size property to the memory controllerCédric Le Goater
This will be used to construct a memory region beyond the RAM region to let firmwares scan the address space with load/store to guess how much RAM the SoC has. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180807075757.7242-7-joel@jms.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08aspeed: add the pc9552 chips to the witherspoon machineCédric Le Goater
The pca9552 LED blinkers on the Witherspoon machine are used for leds but also as GPIOs to control fans and GPUs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-8-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08aspeed: Add EEPROM I2C devicesCédric Le Goater
The Aspeed boards have at least one EEPROM to hold the Vital Product Data (VPD). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08aspeed: add an I2C RTC device to all machinesCédric Le Goater
The AST2500 EVB does not have an RTC but we can pretend that one is plugged on the I2C bus header. The romulus and witherspoon boards expects an Epson RX8900 I2C RTC but a ds1338 is good enough for the basic features we need. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08aspeed: add support for the witherspoon-bmc boardCédric Le Goater
The Witherspoon boards are OpenPOWER system hosting POWER9 Processors. Add support for their BMC including a couple of I2C devices as found on real HW. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180530064049.27976-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08aspeed: remove ignore_memory_transaction_failures on all boardsCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180530064049.27976-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01hw: Do not include "sysemu/blockdev.h" if it is not necessaryPhilippe Mathieu-Daudé
The header "hw/boards.h" already includes "sysemu/blockdev.h". Code change produced with: $ git grep '#include "sysemu/blockdev.h"' hw | \ cut -d: -f-1 | \ xargs fgrep -l '#include "hw/boards.h"' | \ xargs sed -i.bak '/#include "sysemu\/blockdev.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-14-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-26hw/arm/aspeed: don't make 'boot_rom' region 'nomigrate'Peter Maydell
Currently we use memory_region_init_ram_nomigrate() to create the "aspeed.boot_rom" memory region, and we don't manually register it with vmstate_register_ram(). This currently means that its contents are migrated but as a ram block whose name is the empty string; in future it may mean they are not migrated at all. Use memory_region_init_ram() instead. Note that would be a cross-version migration compatibility break for the "palmetto-bmc", "ast2500-evb" and "romulus-bmc" machines, but migration is currently broken for them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180420124835.7268-3-peter.maydell@linaro.org
2017-11-20hw/arm/aspeed: Unlock SCU when running kernelJoel Stanley
The ASPEED hardware contains a lock register for the SCU that disables any writes to the SCU when it is locked. The machine comes up with the lock enabled, but on all known hardware u-boot will unlock it and leave it unlocked when loading the kernel. This means the kernel expects the SCU to be unlocked. When booting from an emulated ROM the normal u-boot unlock path is executed. Things don't go well when booting using the -kernel command line, as u-boot does not run first. Change behaviour so that when a kernel is passed to the machine, set the reset value of the SCU to be unlocked. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20171114122018.12204-1-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-24 12:06:32 +0000