aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi
AgeCommit message (Collapse)Author
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-18Merge remote-tracking branch 'mst/tags/for_upstream' into stagingStefan Hajnoczi
pci, virtio, vhost: fixes A bunch of fixes that missed the release. Most notably we are reverting shpc back to enabled by default state as guests uses that as an indicator that hotplug is supported (even though it's unused). Unfortunately we can't fix this on the stable branch since that would break migration. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 May 2017 10:42:06 PM BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * mst/tags/for_upstream: exec: abstract address_space_do_translate() pci: deassert intx when pci device unrealize virtio: allow broken device to notify guest Revert "hw/pci: disable pci-bridge's shpc by default" acpi-defs: clean up open brace usage ACPI: don't call acpi_pcihp_device_plug_cb on xen iommu: Don't crash if machine is not PC_MACHINE pc: add 2.10 machine type pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot libvhost-user: fix crash when rings aren't ready hw/virtio: fix vhost user fails to startup when MQ hw/arm/virt: generate 64-bit addressable ACPI objects hw/acpi-defs: replace leading X with x_ in FADT field names Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-17qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatableEduardo Habkost
cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()Igor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <1494415802-227633-9-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11numa: Allow setting NUMA distance for different NUMA nodesHe Chen
This patch is going to add SLIT table support in QEMU, and provides additional option `dist` for command `-numa` to allow user set vNUMA distance by QEMU command. With this patch, when a user wants to create a guest that contains several vNUMA nodes and also wants to set distance among those nodes, the QEMU command would like: ``` -numa node,nodeid=0,cpus=0 \ -numa node,nodeid=1,cpus=1 \ -numa node,nodeid=2,cpus=2 \ -numa node,nodeid=3,cpus=3 \ -numa dist,src=0,dst=1,val=21 \ -numa dist,src=0,dst=2,val=31 \ -numa dist,src=0,dst=3,val=41 \ -numa dist,src=1,dst=2,val=21 \ -numa dist,src=1,dst=3,val=31 \ -numa dist,src=2,dst=3,val=21 \ ``` Signed-off-by: He Chen <he.chen@linux.intel.com> Message-Id: <1493260558-20728-1-git-send-email-he.chen@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-10ACPI: don't call acpi_pcihp_device_plug_cb on xenBruce Rogers
Commit f0c9d64a exposed the issue that with a xenfv machine using pci passthrough, acpi pci hotplug code was being executed by mistake. Guard calls to acpi_pcihp_device_plug_cb (and corresponding acpi_pcihp_device_unplug_cb) with a check for xen_enabled(). Without this check I am seeing an error that the bus doesn't have the acpi-pcihp-bsel property set. Signed-off-by: Bruce Rogers <brogers@suse.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-10hw/arm/virt: generate 64-bit addressable ACPI objectsArd Biesheuvel
Our current ACPI table generation code limits the placement of ACPI tables to 32-bit addressable memory, in order to be able to emit the root pointer (RSDP) and root table (RSDT) using table types from the ACPI 1.0 days. Since ARM was not supported by ACPI before version 5.0, it makes sense to lift this restriction. This is not crucial for mach-virt, which is guaranteed to have some memory available below the 4 GB mark, but it is a nice to have for QEMU machines that do not have any 32-bit addressable memory, which is not uncommon for real world 64-bit ARM systems. Since we already emit a version of the RSDP root pointer that has a secondary 64-bit wide address field for the 64-bit root table (XSDT), all we need to do is replace the RSDT generation with the generation of an XSDT table, and use a different slot in the FADT table to refer to the DSDT. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-05tco: do not generate an NMIPaolo Bonzini
This behavior is not indicated in the datasheet and can confuse the OS. The TCO can trap NMIs from SERR# or IOCHK# and convert them to SMIs; but any other TCO event is either delivered as an SMI or completely disabled. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-22hw/acpi/vmgenid: prevent more than one vmgenid deviceLaszlo Ersek
A system with multiple VMGENID devices is undefined in the VMGENID spec by omission. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Ben Warren <ben@skyportsystems.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2017-03-22hw/acpi/vmgenid: prevent device realization on pre-2.5 machine typesLaszlo Ersek
The WRITE_POINTER linker/loader command that underlies VMGENID depends on commit baf2d5bfbac0 ("fw-cfg: support writeable blobs", 2017-01-12), which in turn depends on fw_cfg DMA. DMA for fw_cfg is enabled in 2.5+ machine types only (see commit e6915b5f3a87, "fw_cfg: unbreak migration compatibility for 2.4 and earlier machines", 2016-02-18). Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Ben Warren <ben@skyportsystems.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ben Warren <ben@skyportsystems.com <mailto:ben@skyportsystems.com>> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2017-03-15Bugfix: Handle error if VM Generation ID device not presentBen Warren
This was crashing due to NULL-pointer dereference QMP Test case: ============== (QEMU) query-vm-generation-id {"error": {"class": "GenericError", "desc": "VM Generation ID device not found"}} HMP Test case: ============== virsh # qemu-monitor-command --hmp 3 info vm-generation-id VM Generation ID device not found Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-03Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, pc: fixes, features virtio support for region caches broke a bunch of stuff - fixing most of it though it's not ideal. Still pondering the right way to fix it. New: VM gen ID and hotplug for PXB. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 02 Mar 2017 06:19:17 GMT # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: hw/pxb-pcie: fix PCI Express hotplug support tests/acpi: update DSDT after last patch acpi: simplify _OSC virtio: unbreak virtio-pci with IOMMU after caching ring translations virtio: add missing region cache init in virtio_load() virtio: invalidate memory in vring_set_avail_event() virtio: guard vring access when setting notification virtio: check for vring setup in virtio_queue_empty MAINTAINERS: Add VM Generation ID entries tests: Move reusable ACPI code into a utility file qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands ACPI: Add Virtual Machine Generation ID support ACPI: Add vmgenid blob storage to the build tables docs: VM Generation ID device description linker-loader: Add new 'write pointer' command Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-02qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commandsIgor Mammedov
Add commands to query Virtual Machine Generation ID counter. QMP command example: { "execute": "query-vm-generation-id" } HMP command example: info vm-generation-id Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02ACPI: Add Virtual Machine Generation ID supportBen Warren
This implements the VM Generation ID feature by passing a 128-bit GUID to the guest via a fw_cfg blob. Any time the GUID changes, an ACPI notify event is sent to the guest The user interface is a simple device with one parameter: - guid (string, must be "auto" or in UUID format xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx) Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02ACPI: Add vmgenid blob storage to the build tablesBen Warren
This allows them to be centrally initialized and destroyed The "AcpiBuildTables.vmgenid" array will be used to construct the "etc/vmgenid_guid" fw_cfg blob. Its contents will be linked into fw_cfg after being built on the pc_machine_done() -> acpi_setup() -> acpi_build() call path, and dropped without use on the subsequent, guest triggered, acpi_build_update() -> acpi_build() call path. Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02linker-loader: Add new 'write pointer' commandBen Warren
This is similar to the existing 'add pointer' functionality, but instead of instructing the guest (BIOS or UEFI) to patch memory, it instructs the guest to write the pointer back to QEMU via a writeable fw_cfg file. Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-01bus: do not unref hotplug handlerMarc-André Lureau
Apparently, none of the bus owner give a reference to the hotplug handler property, do not unref it on bus release. Furthermore, a bus is allowed to be its own hotplug handler, which can be seen in qbus_set_bus_hotplug_handler() function. However, in this case, the reference can't be given to the property, or this will create a cyclic dependency and the bus will never be free. Each bus owner should manage the lifecycle of the hotplug handler. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-01pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twiceIgor Mammedov
PCI hotplug for bridges was introduced only since 2.0 however acpi_set_bsel()->object_property_add_uint32_ptr(bus, ACPI_PCIHP_PROP_BSEL) didn't take in account that for legacy mode (1.7) when PCI hotplug for bridges is unavailable and ACPI_PCIHP_PROP_BSEL property the only bus "PCI.0' has been created earlier at acpi_pcihp_init() time. We managed to live with it only because of error rised by adding a duplicate property in acpi_set_bsel() has been ignored which resulted in useless leaking of just allocated (int)bus_bsel. Issue affects only 1.7 machine type as ACPI tables supported by QEMU were introduced at that time, but there wasn't PCI hotplug for bridges till the next release (2.0). Fix it by removing duplicate ACPI_PCIHP_PROP_BSEL intialization in acpi_pcihp_init() and doing it only in one place acpi_set_pci_info(). PS: do not ignore error returned by object_property_add_uint32_ptr() and abort QEMU since it's programming error which should be fixed instead of being ignored. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1470211497-116801-1-git-send-email-imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [ Marc-André - Remove now unused ACPI_PCIHP_LEGACY_SIZE ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-02-28hw/acpi/tco.c: fix tco timer stopIgor Pavlikevich
TCO timer does not actually stop Signed-off-by: Igor Pavlikevich <ipavlikevich@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-02-22change CPUArchId.cpu type to Object*Igor Mammedov
so it could be reused for SPAPR cores as well Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-23machine: Make possible_cpu_arch_ids() return const pointerIgor Mammedov
make sure that external callers won't try to modify possible_cpus and owner of possible_cpus can access it directly when it modifies it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1484759609-264075-5-git-send-email-imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-16acpi: filter based on CONFIG_ACPI_X86 rather than TARGETPaolo Bonzini
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub instead, so that -acpitable can be later extended to ARM. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: move acpi stubs to hw/acpiPaolo Bonzini
No need to include them in libqemustub.a, since only system emulators need them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-10memhp: move DIMM devices into dedicated scope with related common methodsIgor Mammedov
Move DIMM devices from global _SB scope to a new \_SB.MHPC container along with common methods used by DIMMs: MCRS, MRST, MPXM, MOST, MEJ00, MSCN, MTFY this reduces AML size on 12 * #slots bytes, i.e. up to 3072 bytes for 265 slots. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: don't generate memory hotplug AML if it's not enabled/supportedIgor Mammedov
That reduces DSDT by 910 bytes when memory hotplug isn't enabled. While doing so drop intermediate variables/arguments passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making it local to memory_hotplug.c, hardcoding it there as it can't change. Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through intermediate variables/arguments where it's not needed. Instead initialize in module static variable when MMIO region is mapped and use that within memory_hotplug.c whenever it's required. That way MMIO base specified only at one place and AML with MMIO would always use the same value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: move memory hotplug only defines to memory_hotplug.cIgor Mammedov
Move defines used locally only by memory_hotplug.c into it from header files. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: move GPE handler_E03 into build_memory_hotplug_aml()Igor Mammedov
>From this patch all the memory hotplug related AML bits are consolidated in one place within DSTD. Follow up patches will utilize that to simplify memory hotplug related C/AML code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: merge build_memory_devices() into build_memory_hotplug_aml()Igor Mammedov
It consolidates memory hotplug AML in one place within DSDT Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10memhp: consolidate scattered MHPD device declarationIgor Mammedov
since static and dynamic parts of memory MHPD device are now in the same table (DSDT), there is no point keeping them scattered across the table, so consolidate it in one place. There aren't any functional change, only AML text movement from externally refferenced MHPD scope directly into MHPD device declaration. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: move build_memory_devices() into memory_hotplug.cIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: move build_memory_hotplug_aml() into memory_hotplug.cIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-11-15nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZEXiao Guangrong
and use it to replace the raw number Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15nvdimm acpi: use aml_name_decl to define named objectXiao Guangrong
to make the code more clearer Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15nvdimm acpi: rename nvdimm_dsm_reserved_rootXiao Guangrong
Rename it to nvdimm_dsm_handle_reserved_root_method Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15nvdimm acpi: fix two commentsXiao Guangrong
fixed the English issue and code-style issue Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15nvdimm acpi: define DSM return codesXiao Guangrong
and use these codes to refine the code Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15nvdimm acpi: rename nvdimm_acpi_hotplugXiao Guangrong
Rename it to nvdimm_plug() Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15nvdimm acpi: cleanup nvdimm_build_fitXiao Guangrong
inline buf_size to refine the code a bit Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15nvdimm acpi: rename nvdimm_plugged_device_listXiao Guangrong
Its behavior has been changed as the nvdimm device which is being realized also will be handled in this function, so rename it to reflect the fact Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15nvdimm acpi: clean up nvdimm_build_acpiXiao Guangrong
To make the code more clearer, we 1) check ram_slots first, and build ssdt & nfit only when it is available 2) use nvdimm_get_plugged_device_list() to check if there is nvdimm device plugged Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15pc: memhp: move nvdimm hotplug out of memory hotplugXiao Guangrong
as they use completely different way to handle hotplug event Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15nvdimm acpi: drop the lock of fit bufferXiao Guangrong
as there is a global lock to protect vm-exit handlers and QMP/monitor, this lock can be dropped Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-15qdev: hotplug: drop HotplugHandler.post_plug callbackXiao Guangrong
as nvdimm acpi is okay to build fit when the nvdimm device has not been 'realized' Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-11-01acpi: fix assert failure caused by commit 35c5a52dHaozhong Zhang
Commit 35c5a52d "acpi: do not use TARGET_PAGE_SIZE" changed struct NvdimmDsmIn from a variable-size structure to a fixed-size structure of 4096 bytes. It forgot to adjust an assert in nvdimm_dsm_set_label_data(..., NvdimmDsmIn *in, ...): assert(sizeof(*in) + sizeof(*set_label_data) + set_label_data->length <= 4096); which could crash QEMU when guest writes NVDIMM labels. Fix it by replacing sizeof(*in) by offsetof(NvdimmDsmIn, arg3). Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reported-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01acpi/ipmi: Initialize the fwinfo before fetching itCorey Minyard
The initialization was missed before, resulting in some bad data in the smbus case. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01pc: memhp: enable nvdimm device hotplugXiao Guangrong
_GPE.E04 is dedicated for nvdimm device hotplug Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: introduce _FITXiao Guangrong
_FIT is required for hotplug support, guest will inquire the updated device info from it if a hotplug event is received As FIT buffer is not completely mapped into guest address space, so a new function, Read FIT whose UUID is UUID 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62, handle 0x10000, function index is 0x1, is reserved by QEMU to read the piece of FIT buffer. The buffer is concatenated before _FIT return Refer to docs/specs/acpi-nvdimm.txt for detailed design Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: introduce fit bufferXiao Guangrong
The buffer is used to save the FIT info for all the presented nvdimm devices which is updated after the nvdimm device is plugged or unplugged. In the later patch, it will be used to construct NVDIMM ACPI _FIT method which reflects the presented nvdimm devices after nvdimm hotplug As FIT buffer can not completely mapped into guest address space, OSPM will exit to QEMU multiple times, however, there is the race condition - FIT may be changed during these multiple exits, so that some rules are introduced: 1) the user should hold the @lock to access the buffer and 2) mark @dirty whenever the buffer is updated. @dirty is cleared for the first time OSPM gets fit buffer, if dirty is detected in the later access, OSPM will restart the access As fit should be updated after nvdimm device is successfully realized so that a new hotplug callback, post_hotplug, is introduced Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: prebuild nvdimm devices for available slotsXiao Guangrong
For each NVDIMM present or intended to be supported by platform, platform firmware also exposes an ACPI Namespace Device under the root device So it builds nvdimm devices for all slots to support vNVDIMM hotplug Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01nvdimm acpi: use common macros instead of magic namesXiao Guangrong
There are some names repeatedly used in acpi code, define them as macros to refine the code Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 04:48:54 +0000