aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi/piix4.c
AgeCommit message (Collapse)Author
2017-12-05pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson
The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen"Anthony PERARD
This reverts commit 153eba4726dfa1bdfc31d1fe973b2a61b9035492. This patch prevents PCI passthrough hotplug on Xen. Even if the Xen tool stack prepares its own ACPI tables, we still rely on QEMU for hotplug ACPI notifications. The original issue is fixed by the two previous patch: hw/acpi: Limit hotplug to root bus on legacy mode hw/acpi: Move acpi_set_pci_info to pcihp Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-18Merge remote-tracking branch 'mst/tags/for_upstream' into stagingStefan Hajnoczi
pci, virtio, vhost: fixes A bunch of fixes that missed the release. Most notably we are reverting shpc back to enabled by default state as guests uses that as an indicator that hotplug is supported (even though it's unused). Unfortunately we can't fix this on the stable branch since that would break migration. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 May 2017 10:42:06 PM BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * mst/tags/for_upstream: exec: abstract address_space_do_translate() pci: deassert intx when pci device unrealize virtio: allow broken device to notify guest Revert "hw/pci: disable pci-bridge's shpc by default" acpi-defs: clean up open brace usage ACPI: don't call acpi_pcihp_device_plug_cb on xen iommu: Don't crash if machine is not PC_MACHINE pc: add 2.10 machine type pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot libvhost-user: fix crash when rings aren't ready hw/virtio: fix vhost user fails to startup when MQ hw/arm/virt: generate 64-bit addressable ACPI objects hw/acpi-defs: replace leading X with x_ in FADT field names Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-17qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatableEduardo Habkost
cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-10ACPI: don't call acpi_pcihp_device_plug_cb on xenBruce Rogers
Commit f0c9d64a exposed the issue that with a xenfv machine using pci passthrough, acpi pci hotplug code was being executed by mistake. Guard calls to acpi_pcihp_device_plug_cb (and corresponding acpi_pcihp_device_unplug_cb) with a check for xen_enabled(). Without this check I am seeing an error that the bus doesn't have the acpi-pcihp-bsel property set. Signed-off-by: Bruce Rogers <brogers@suse.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-01bus: do not unref hotplug handlerMarc-André Lureau
Apparently, none of the bus owner give a reference to the hotplug handler property, do not unref it on bus release. Furthermore, a bus is allowed to be its own hotplug handler, which can be seen in qbus_set_bus_hotplug_handler() function. However, in this case, the reference can't be given to the property, or this will create a cyclic dependency and the bus will never be free. Each bus owner should manage the lifecycle of the hotplug handler. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-10memhp: don't generate memory hotplug AML if it's not enabled/supportedIgor Mammedov
That reduces DSDT by 910 bytes when memory hotplug isn't enabled. While doing so drop intermediate variables/arguments passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making it local to memory_hotplug.c, hardcoding it there as it can't change. Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through intermediate variables/arguments where it's not needed. Instead initialize in module static variable when MMIO region is mapped and use that within memory_hotplug.c whenever it's required. That way MMIO base specified only at one place and AML with MMIO would always use the same value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-11-15pc: memhp: move nvdimm hotplug out of memory hotplugXiao Guangrong
as they use completely different way to handle hotplug event Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-06-24pc: use new CPU hotplug interface since 2.7 machine typeIgor Mammedov
For compatibility reasons PC/Q35 will start with legacy CPU hotplug interface by default but with new CPU hotplug AML code since 2.7 machine type. That way legacy firmware that doesn't use QEMU generated ACPI tables will be able to continue using legacy CPU hotplug interface. While new machine type, with firmware supporting QEMU provided ACPI tables, will generate new CPU hotplug AML, which will switch to new CPU hotplug interface when guest OS executes its _INI method on ACPI tables loading. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: add cpu._OST handlingIgor Mammedov
it adds HW and AML parts for CPU_Device._OST method handling to allow OSPM reports status of hot-(un)plug operation. And extends QMP command query-acpi-ospm-status to report CPU's OST info along with already reported PC-DIMM devices. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: implement hot-remove parts of CPU hotplug interfaceIgor Mammedov
it adds hw registers needed for handling CPU hot-remove and corresponding AML methods to request and eject a CPU with necessary hotplug callbacks in pc,piix4,ich9 code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hookIgor Mammedov
Add madt_cpu callback to AcpiDeviceIfClass and use it for generating LAPIC MADT entries for CPUs. Later it will be used for generating x2APIC entries in case of more than 255 CPUs and also would be reused by ARM target when ACPI CPU hotplug is introduced there. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: add CPU devices AML with _STA methodIgor Mammedov
it adds CPU objects to DSDT with _STA method and QEMU side of CPU hotplug interface initialization with registers sufficient to handle _STA requests, including necessary hotplug callbacks in piix4,ich9 code. Hot-(un)plug hw/acpi parts will be added by corresponding follow up patches. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: piix4/ich9: add 'cpu-hotplug-legacy' propertyIgor Mammedov
It will be used to select which hotplug call-back is called and for switching from legacy mode into new one. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07pc: use AcpiDeviceIfClass.send_event to issue GPE eventsIgor Mammedov
it reduces number of args passed in handlers by 1 and a number of used proxy wrappers saving ~20LOC. Also it allows to make cpu/mem hotplug code more universal as it would allow ARM to reuse it without rewrite by providing its own send_event callback to trigger events usiong GPIO instead of GPE as fixed hadrware ACPI model doen't have GPE at all. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07acpi: extend ACPI interface to provide send_event hookIgor Mammedov
send_event() hook will allow to send ACPI event in a target specific way (GPE or GPIO based impl.) it will also simplify proxy wrappers in piix4pm/ich9 that access ACPI regs and SCI which are part of piix4pm/lcp_ich9 devices and call acpi_foo() API directly. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-06-07pc: acpi: mark current CPU hotplug functions as legacyIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-05-19explicitly include qom/cpu.hPaolo Bonzini
exec/cpu-all.h includes qom/cpu.h. Explicit inclusion will keep things working when cpu.h will not be included indirectly almost everywhere (either directly or through qemu-common.h). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-29x86: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2015-07-06pc_piix: rename kvm_enabled to smm_enabledPaolo Bonzini
We will enable SMM even if KVM is in use. Rename the field and arguments. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06piix4/ich9: do not raise SMI on ACPI enable/disable commandsPaolo Bonzini
These commands are handled entirely by QEMU. Do not raise an SMI when they happen, because Windows (at least 2008r2) expects these commands to work and (depending on the value of APMC_EN at startup) the firmware might not have installed an SMI handler. When this happens (e.g. the kernel supports SMIs, or you are using TCG, but you have used "-machine smm=off") RIP is moved to 0x38000 where there is no code to execute. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-12migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-04hw/acpi: piix4_pm_init(): take fw_cfg object no moreLaszlo Ersek
This PIIX4 init function has no more reason to receive a pointer to the FwCfg object. Remove the parameter from the prototype, and update callers. As a result, the pc_init1() function no longer needs to save the return value of pc_memory_init() and xen_load_linux(), which makes it more similar to pc_q35_init(). The return type & value of pc_memory_init() and xen_load_linux() are not changed themselves; maybe we'll need their return values sometime later. RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696 Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2015-06-04hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to coreLaszlo Ersek
The acpi_pm1_cnt_init() core function is responsible for setting up the register block that will ultimately react to S3 and S4 requests (see acpi_pm1_cnt_write()). It makes sense to advertise this configuration to the guest firmware via an easy to parse fw_cfg file (ACPI is too complex for firmware to parse), and indeed PIIX4 does that. However, since acpi_pm1_cnt_init() is not specific to PIIX4, neither should be the fw_cfg file. This patch makes "etc/system-states" appear on all chipsets modified in the previous patch, not just PIIX4 (assuming they have fw_cfg at all). RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696 Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2015-06-04hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"Laszlo Ersek
This patch only modifies the function prototype and updates all chipset code that calls acpi_pm1_cnt_init() to pass in their own disable_s3 and disable_s4 settings. vt82c686 is assumed to be fixed "S3 and S4 enabled". RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696 Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2015-04-27acpi, mem-hotplug: add unplug cb for memory deviceTang Chen
This patch adds unplug cb for memory device. It resets memory status "is_enabled" in acpi_memory_unplug_cb(), removes the corresponding memory region, unregisters vmstate, and unparents the object. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-27acpi, mem-hotplug: add unplug request cb for memory deviceTang Chen
This patch adds unplug request cb for memory device, and adds the is_removing boolean field to MemStatus. This field is used to indicate whether the memory device in slot has been requested to be ejected. This field is set to true in acpi_memory_unplug_request_cb(). Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26pc: pcihp: expose MMIO base and len as propertiesIgor Mammedov
it will be used later to dynamically reserve MMIO region instead of manually punching holes in PCI0._CRS Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26acpi, piix4: Add unplug cb for piix4.Tang Chen
Memory and CPU hot unplug are both asynchronous procedures. When the unplug operation happens, unplug request cb is called first. And when guest OS finished handling unplug, unplug cb will be called to do the real removal of device. This patch adds hotunplug cb to piix4, which memory and CPU hot unplug will use it. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26pci: Trivial device model conversions to realizeMarkus Armbruster
Convert the device models where initialization obviously can't fail. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-14pc: piix4_pm: init legacy PCI hotplug when running on XenIgor Mammedov
If user starts QEMU with "-machine pc,accel=xen", then compat property in xenfv won't work and it would cause error: "Unsupported bus. Bus doesn't have property 'acpi-pcihp-bsel' set" when PCI device is added with -device on QEMU CLI. From: Igor Mammedov <imammedo@redhat.com> In case of Xen instead of using compat property, just use the fact that xen doesn't use QEMU's fw_cfg/acpi tables to switch piix4_pm into legacy PCI hotplug mode when Xen is enabled. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Li Liang <liang.z.li@intel.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-02cpu-hotplug: rename function for better readabilityGu Zheng
Rename: AcpiCpuHotplug_init --> acpi_cpu_hotplug_init AcpiCpuHotplug_ops --> acpi_cpu_hotplug_ops for better readability, just cleanup. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2014-11-02acpi:piix4: convert cpu hotplug to hotplug_handler APIGu Zheng
Convert notifier based hotplug to hotplug_handler API, and remove the unused AcpiCpuHotplug_add(). Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2014-10-15qdev: HotplugHandler: Rename unplug callback to unplug_requestIgor Mammedov
'HotplugHandler.unplug' callback is currently used as async call to issue unplug request for device that implements it. Renaming 'unplug' callback to 'unplug_request' should help to avoid confusion about what callback does and would allow to introduce 'unplug' callback that would perform actual device removal when guest is ready for it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-06-19acpi: implement ospm_status() method for PIIX4/ICH9_LPC devicesIgor Mammedov
... using TYPE_ACPI_DEVICE_IF interface. Which provides status reporting of ACPI declared memory devices Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add acpi-device link to PCMachineStateIgor Mammedov
the link will used later to access device implementing ACPI functions instead of adhoc lookup in QOM tree. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: migrate piix4 & ich9 MemHotplugStateIgor Mammedov
Adds an optional subsection that allows to migrate current state of acpi_memory_hotplug of ACPI PM device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi:piix4: add memory hotplug handlingIgor Mammedov
Add memory hotplug initialization/handling to PIIX4_PM device and enable it by default for post 2.0 machine types Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: resolve conflict in pc.h
2014-06-19acpi:piix4: allow plug/unlug callbacks handle not only PCI devicesIgor Mammedov
... and report error if plugged in device is not supported. Later these callbacks will be used by memory hotplug. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-20Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell
into staging QOM infrastructure fixes and device conversions * QTest cleanups and test cases for PCI NICs * NAND fix for "info qtree" * Cleanup and extension of QOM machine tests * IndustryPack test cases and conversion to QOM realize * I2C cleanups * Cleanups of legacy qdev properties # gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: (49 commits) qtest: Include system headers before user headers qapi: Refine human printing of sizes qdev: Use QAPI type names for properties qdev: Add enum property types to QAPI schema block: Handle "rechs" and "large" translation options qdev: Remove hex8/32/64 property types qdev: Remove most legacy printers qdev: Use human mode in "info qtree" qapi: Add human mode to StringOutputVisitor qdev: Inline qdev_prop_parse() qdev: Legacy properties are just strings qdev: Legacy properties are now read-only qdev: Remove legacy parsers for hex8/32/64 qdev: Sizes are now parsed by StringInputVisitor qapi: Add size parser to StringInputVisitor qtest: Don't segfault with invalid -qtest option ipack: Move IndustryPack out of hw/char/ ipoctal232: QOM parent field cleanup ipack: QOM parent field cleanup for IPackDevice ipack: QOM parent field cleanup for IPackBus ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-14i2c: Rename i2c_bus to I2CBusAndreas Färber
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-10acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler APIIgor Mammedov
Split piix4_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PIIX4_PM device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PIIX4_PM device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10qdev:pci: refactor PCIDevice to use generic "hotpluggable" propertyIgor Mammedov
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10hw/acpi: move typeinfo to the file endIgor Mammedov
do so to avoid not necessary forward declarations and place typeinfo registration at the file end where it's usually expected. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05hw:piix4:acpi: reuse pcihp code for legacy PCI hotplugIgor Mammedov
reduces acpi PCI hotplug code duplication by ~200LOC Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplugIgor Mammedov
due to recent change introduced by: "pcihp: reduce number of device check events" 'up' field is cleared right after it's read. This is incompatible with legacy BIOS ACPI code where PCNF ACPI method reads this field 32 times. To make pci_read mmio callback compatible with legacy 'up' behavior, pcihp code will need to know in which mode it runs add 'legacy_piix' field to AcpiPciHpState structure and alter register behavior accordingly. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-14 10:27:08 +0000