aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi/ich9.c
AgeCommit message (Collapse)Author
2015-07-07ich9: add TCO interface emulationPaulo Alcantara
This interface provides some registers within a 32-byte range and can be acessed through PCI-to-LPC bridge interface (PMBASE + 0x60). It's commonly used as a watchdog timer to detect system lockups through SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If NO_REBOOT bit is not set in GCS (General Control and Status register), the system will be resetted upon second timeout if TCO_RLD register wasn't previously written to prevent timeout. This patch adds support to TCO watchdog logic and few other features like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection, etc. are not implemented yet. Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-06ich9: add smm_enabled field and argumentsPaolo Bonzini
Q35's ACPI device is hard-coding SMM availability to KVM. Place the logic where the board is created instead, so that it will be possible to override it. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-12migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-05ich9: implement SMI_LOCKGerd Hoffmann
Add write mask for the smi enable register, so we can disable write access to certain bits. Open all bits on reset. Disable write access to GBL_SMI_EN when SMI_LOCK (in ich9 lpc pci config space) is set. Write access to SMI_LOCK itself is disabled too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-04hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"Laszlo Ersek
This patch only modifies the function prototype and updates all chipset code that calls acpi_pm1_cnt_init() to pass in their own disable_s3 and disable_s4 settings. vt82c686 is assumed to be fixed "S3 and S4 enabled". RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696 Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2015-04-27acpi, mem-hotplug: add unplug cb for memory deviceTang Chen
This patch adds unplug cb for memory device. It resets memory status "is_enabled" in acpi_memory_unplug_cb(), removes the corresponding memory region, unregisters vmstate, and unparents the object. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-27acpi, mem-hotplug: add unplug request cb for memory deviceTang Chen
This patch adds unplug request cb for memory device, and adds the is_removing boolean field to MemStatus. This field is used to indicate whether the memory device in slot has been requested to be ejected. This field is set to true in acpi_memory_unplug_request_cb(). Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26acpi, ich9: Add unplug cb for ich9.Tang Chen
Memory and CPU hot unplug are both asynchronous procedures. When the unplug operation happens, unplug request cb is called first. And when guest OS finished handling unplug, unplug cb will be called to do the real removal of device. This patch adds hotunplug cb to ich9, which memory and CPU hot unplug will use it. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26acpi, ich9: Add hotunplug request cb for ich9.Tang Chen
Memory and CPU hot unplug are both asynchronous procedures. They both need unplug request cb when the unplug operation happens. This patch adds hotunplug request cb for ich9, and memory and CPU hot unplug will share it. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-01-27Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc, virtio fixes and cleanups A bunch of fixes all over the place. Also, beginning to generalize acpi build code for reuse by ARM. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 27 Jan 2015 13:12:25 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: pc-dimm: Add Error argument to pc_existing_dimms_capacity pc-dimm: Make pc_existing_dimms_capacity global pc: Fix DIMMs capacity calculation smbios: Don't report unknown CPU speed (fix SVVP regression) smbios: Fix dimm size calculation when RAM is multiple of 16GB bios-linker-loader: move source to common location bios-linker-loader: move header to common location virtio: fix feature bit checks bios-tables-test: split piix4 and q35 tests acpi: build_append_nameseg(): add padding if necessary acpi: update generated hex files acpi-test: update expected DSDT pc: acpi: fix WindowsXP BSOD when memory hotplug is enabled pci: Split pcie_host_mmcfg_map() Add some trace calls to pci.c. ich9: add disable_s3, disable_s4, s4_val properties Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-26ich9: add disable_s3, disable_s4, s4_val propertiesAmit Shah
PIIX4 has disable_s3 and disable_s4 properties to enable or disable PM functions. Add such properties to the ICH9 chipset as well for the Q35 machine type. S3 / S4 are not guaranteed to always work (needs work in the guest as well as QEMU for things to work properly), and disabling advertising of these features ensures guests don't go into zombie state if something isn't working right. The defaults are kept the same as in PIIX4: both S3 and S4 are enabled by default. These can be disabled via the cmdline: ... -global ICH9-LPC.disable_s3=1 -global ICH9-LPC.disable_s4=1 Note: some guests can fake hibernation by writing a hibernate image and doing a shutdown instead of S4 if S4 isn't available; there's nothing we can do guests to stop doing this, and this patch can't affect that functionality. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-02cpu-hotplug: rename function for better readabilityGu Zheng
Rename: AcpiCpuHotplug_init --> acpi_cpu_hotplug_init AcpiCpuHotplug_ops --> acpi_cpu_hotplug_ops for better readability, just cleanup. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2014-11-02acpi:ich9: convert cpu hotplug to hotplug_handler APIGu Zheng
Convert notifier based hotplug to hotplug_handler API. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2014-07-11fix typo: apci -> acpiHu Tao
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: rebase
2014-06-19acpi: implement ospm_status() method for PIIX4/ICH9_LPC devicesIgor Mammedov
... using TYPE_ACPI_DEVICE_IF interface. Which provides status reporting of ACPI declared memory devices Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: migrate piix4 & ich9 MemHotplugStateIgor Mammedov
Adds an optional subsection that allows to migrate current state of acpi_memory_hotplug of ACPI PM device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi:ich9: add memory hotplug handlingIgor Mammedov
Add memory hotplug initialization/handling to ICH9 LPC device and enable it by default for post 2.0 machine types Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi: ich9: add CPU hotplug handling to Q35 machineIgor Mammedov
.. use IO port 0cd8-0xcf7 range for CPU present bitmap Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-23acpi: ich9: allow guest to clear SCI rised by GPEIgor Mammedov
it fixes IRQ storm since guest isn't able to lower SCI IRQ after it has been handled when it clears GPE event. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-23acpi: factor out common pm_update_sci() into acpi coreIgor Mammedov
... and rename it into acpi_update_sci() since it changes SCI on only on PM registers status. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14ich9: APIs for pc guest infoMichael S. Tsirkin
This adds APIs that will be used to fill in acpi tables, implemented using QOM, to various ich9 components. Some information is still missing in QOM, so we fall back on lookups by type instead. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04hw/a*: pass owner to memory_region_init* functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-24ich9: kill cmos_s3Hu Tao
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366799842-18550-1-git-send-email-hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 05:41:37 +0000