aboutsummaryrefslogtreecommitdiff
path: root/hw/Makefile.objs
AgeCommit message (Collapse)Author
2013-04-19virtio: simplify Makefile conditionalsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15tpm: reorganize headers and split hardware partPaolo Bonzini
The TPM subsystem does not have a full front-end/back-end separation. The sole available backend, tpm_passthrough, depends on the data structures of the sole available frontend, tpm_tis. However, we can at least try to split the user interface (tpm.c) from the implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h, which is shared between tpm_tis.c and tpm_passthrough.c; instead it moves more stuff to tpm_backend.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move VFIO and ivshmem to hw/misc/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move PCI bridges to hw/pci-* or hw/ARCHPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move display devices to hw/display/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move virtio devices to hw/ subdirectoriesPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make subdirectories for devicesPaolo Bonzini
Prepare the new directory structure. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-25VMXNET3 device implementationDmitry Fleytman
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25Packet abstraction for VMWARE network devicesDmitry Fleytman
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15pl330: Initial versionPeter Crosthwaite
Device model for Primecell PL330 DMA controller. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-01hw: move boards and other isolated files to hw/ARCHPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move device-hotplug.o to toplevel, compile it oncePaolo Bonzini
The situation with device-hotplug.c is similar to qdev-monitor.c. Add a stub for pci_drive_hot_add, so that it can be compiled once, and move it out of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move qdev-monitor.o to toplevel directoryPaolo Bonzini
qdev-monitor.c is the only "core qdev" file that is not used in user-mode emulation, and it does not define anything that is used by hardware models. Remove it from the hw/ directory and remove hw/qdev-monitor.h from hw/qdev.h too; this requires some files to have some new explicitly includes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move fifo.[ch] to libqemuutilPaolo Bonzini
fifo.c is generic code that can be easily unit tested. So it belongs in libqemuutil. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move char backends to backends/Paolo Bonzini
Braille and msmouse support is in hw/, but it is not hardware. Move it to the backends/ directory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-28hw/sdhci: introduce standard SD host controllerIgor Mitsyanko
Device model for standard SD Host Controller Interface (SDHCI) compliant with version 2.00 of SD association specification. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-19allow disabling usb smartcard supportGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-26build: remove extra-obj-yPaolo Bonzini
extra-obj-y is somewhat complicated to understand. Replace it with a special CONFIG_ALL symbol that is defined only at toplevel. This limits the case of directories defining more than one *-obj-y target. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-26build: remove universal-obj-yPaolo Bonzini
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how we define symbols for hardware components. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-21virtio-bus: introduce virtio-busKONRAD Frederic
Introduce virtio-bus. Refactored transport device will create a bus which extends virtio-bus. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-14Add GE IP-Octal 232 IndustryPack emulationAlberto Garcia
The GE IP-Octal 232 is an IndustryPack module that implements eight RS-232 serial ports, each one of which can be redirected to a character device in the host. Signed-off-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-14Add TEWS TPCI200 IndustryPack emulationAlberto Garcia
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules. A new bus type called 'IndustryPack' has been created so any compatible module can be attached to this board. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-12build: consolidate multiple variables into universal-obj-yPaolo Bonzini
The directory descent mechanism, and a less-flat tree both helped in making some *-obj-y definitions very short. Many of these often end up in universal-obj-y, and used to be separate only because of libuser (which is now part of history...). Consolidate these variables in a single one. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: remove CONFIG_SMARTCARDPaolo Bonzini
The passthru smartcard does not have the shared library dependency, build it unconditionally. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-10Merge branch 'master' of git://git.qemu.org/qemu into prep-upAndreas Färber
Conflicts: hw/Makefile.objs hw/ppc_prep.c Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-01-08qdev: Include qdev code into *-user, tooEduardo Habkost
The code depends on some functions from qemu-option.o, so add qemu-option.o to universal-obj-y to make sure it's included. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-03dataplane: use linux-headers/ for virtio includesStefan Hajnoczi
The hw/dataplane/vring.c code includes linux/virtio_ring.h. Ensure that we use linux-headers/ instead of the system-wide headers, which may be out-of-date on older distros. This resolves the following build error on Debian 6: CC hw/dataplane/vring.o cc1: warnings being treated as errors hw/dataplane/vring.c: In function 'vring_enable_notification': hw/dataplane/vring.c:71: error: implicit declaration of function 'vring_avail_event' hw/dataplane/vring.c:71: error: nested extern declaration of 'vring_avail_event' hw/dataplane/vring.c:71: error: lvalue required as left operand of assignment Note that we now build dataplane/ for each target instead of only once. There is no way around this since linux-headers/ is only available for per-target objects - and it's how virtio, vfio, kvm, and friends are built. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02dataplane: add host memory mapping codeStefan Hajnoczi
The data plane thread needs to map guest physical addresses to host pointers. Normally this is done with cpu_physical_memory_map() but the function assumes the global mutex is held. The data plane thread does not touch the global mutex and therefore needs a thread-safe memory mapping mechanism. Hostmem registers a MemoryListener similar to how vhost collects and pushes memory region information into the kernel. There is a fine-grained lock on the regions list which is held during lookup and when installing a new regions list. When the physical memory map changes the MemoryListener callbacks are invoked. They build up a new list of memory regions which is finally installed when the list has been completed. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-23Merge branch 'master' of git://git.qemu.org/qemu into qom-cpuAndreas Färber
Adapt header include paths. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19qdev-properties.c: Separate core from the code used only by qemu-system-*Eduardo Habkost
This separates the qdev properties code in two parts: - qdev-properties.c, that contains most of the qdev properties code; - qdev-properties-system.c for code specific for qemu-system-*, containing: - Property types: drive, chr, netdev, vlan, that depend on code that won't be included on *-user - qemu_add_globals(), that depends on qemu-config.o. This change should help on two things: - Allowing DeviceState to be used by *-user without pulling dependencies that are specific for qemu-system-*; - Writing qdev unit tests without pulling too many dependencies. The copyright/license of qdev-properties.c isn't explicitly stated at the file, so add a simple copyright/license header pointing to the commit ID of the original file. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19build: move rules from Makefile to */Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17Merge commit '1dd3a74d2ee2d873cde0b390b536e45420b3fe05' into HEADPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: move pci core code to hw/pciMichael S. Tsirkin
Move files and modify makefiles to pick them at the new location. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-11-26ich9: Add i82801b11 dmi-to-pci bridgeJason Baron
Add the dmi-to-pci i82801b11 bridge chip. This is the pci bridge chip that q35 uses on its host bus for PCI bus arbitration. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-26ich9: Add smbusJason Baron
Add support for the ich9 smbus chip. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-26ich9: Add acpi support and definitionsJason Baron
Lay the groundwork for subsequent ich9 support. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-26pc/piix_pci: factor out smram/pam logicIsaku Yamahata
Factor out smram/pam logic for use by other chipsets, namely q35 at this point. Note: Should be factored out into a generic North Bridge Class. [jbaron@redhat.com: changes for updated memory API] Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-16virtio-rng: hardware random number generator deviceAmit Shah
The Linux kernel already has a virtio-rng driver, this is the device implementation. When the guest asks for entropy from the virtio hwrng, it puts a buffer in the vq. We then put entropy into that buffer, and push it back to the guest. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- aliguori: converted to new RngBackend interface aliguori: remove entropy needed event aliguori: fix migration
2012-10-22serial: add pci variantGerd Hoffmann
So we get a hot-pluggable 16550 uart. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-22serial: split serial.cGerd Hoffmann
Split serial.c into serial.c, serial.h and serial-isa.c. While being at creating a serial.h header file move the serial prototypes from pc.h to the new serial.h. The latter leads to s/pc.h/serial.h/ in tons of boards which just want the serial bits from pc.h Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-10m25p80: Initial implementation of SPI flash devicePeter A. G. Crosthwaite
Added device model for m25p80 style SPI flash family. Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-10-10hw: Added generic FIFO API.Peter A. G. Crosthwaite
Added a FIFO API that can be used to create and operate byte FIFOs. Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-10-05Remove libhwStefan Weil
The entries for libhw* are no longer needed in .gitignore. There is also no longer a difference between common-obj-y and hw-obj-y, so one of those two macros is sufficient. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-01vfio: Enable vfio-pci and mark supportedAlex Williamson
Enabled for all softmmu guests supporting PCI on Linux hosts. Note that currently only x86 hosts have the kernel side VFIO IOMMU support for this. PPC (g3beige) is the only non-x86 guest known to work. ARM (veratile) hangs in firmware, others untested. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-22boards: add a 'none' machine type to all platformsAnthony Liguori
This allows any QEMU binary to be executed with: $QEMU_BINARY -M none -qmp stdio Without errors from missing options that are required by various boards. This also provides a mode that we can use in the future to construct machines entirely through QMP commands. Cc: Daniel Berrange <berrange@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-15prep: Add pc87312 Super I/O emulationHervé Poussineau
This provides floppy and IDE controllers as well as serial and parallel ports. However, dynamic configuration of devices is not yet supported. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> [AF: QOM'ify, split out header, create CharDriverState if absent] Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2012-08-13arm: Move some ARM devices into libhwAndreas Färber
Avoids some unnecessary dependencies on cpu.h and prepares for a future armeb-softmmu where most machines would not be built. Defer touching the SoC devices since most have implicit or explicit dependencies on the CPU. Signed-off-by: Andreas Färber <andreas.faerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-13xilinx_axi*: Re-implemented interconnectPeter A. G. Crosthwaite
Re-implemented the interconnect between the Xilinx AXI ethernet and DMA controllers. A QOM interface "stream" is created, for the two stream interfaces. As per Edgars request, this is designed to be more generic than AXI-stream, so in the future we may see more clients of this interface beyond AXI stream. This is based primarily on Paolos original refactoring of the interconnect. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 dma supportGuan Xuetao
This patch adds puv3 dma (Direct Memory Access) support, include dma device simulation for kernel booting. v1->v2: Add initialization to ret in puv3_dma_read. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 18:05:08 +0000