aboutsummaryrefslogtreecommitdiff
path: root/hmp.c
AgeCommit message (Collapse)Author
2015-11-11blockdev: read-only-mode for blockdev-change-mediumMax Reitz
Add an option to qmp_blockdev_change_medium() which allows changing the read-only status of the block device whose medium is changed. Some drives do not have a inherently fixed read-only status; for instance, floppy disks can be set read-only or writable independently of the drive. Some users may find it useful to be able to therefore change the read-only status of a block device when changing the medium. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11hmp: Use blockdev-change-medium for change commandMax Reitz
Use separate code paths for the two overloaded functions of the 'change' HMP command, and invoke the 'blockdev-change-medium' QMP command if used on a block device (by calling qmp_blockdev_change_medium()). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-10migrate_start_postcopy: Command to trigger transition to postcopyDr. David Alan Gilbert
Once postcopy is enabled (with migrate_set_capability), the migration will still start on precopy mode. To cause a transition into postcopy the: migrate_start_postcopy command must be issued. Postcopy will start sometime after this (when it's next checked in the migration loop). Issuing the command before migration has started will error, and issuing after it has finished is ignored. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-02tpm: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for TPM-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-22-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02memory: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for memory-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-21-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02input: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for input-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-20-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02qapi: Unbox base membersEric Blake
Rather than storing a base class as a pointer to a box, just store the fields of that base class in the same order, so that a child struct can be directly cast to its parent. This gives less malloc overhead, less pointer dereferencing, and even less generated code. Compare to the earlier commit 1e6c1616a "qapi: Generate a nicer struct for flat unions" (although that patch had fewer places to change, as less of qemu was directly using qapi structs for flat unions). It also allows us to turn on automatic type-safe wrappers for upcasting to the base class of a struct. Changes to the generated code look like this in qapi-types.h: | struct SpiceChannel { |- SpiceBasicInfo *base; |+ /* Members inherited from SpiceBasicInfo: */ |+ char *host; |+ char *port; |+ NetworkAddressFamily family; |+ /* Own members: */ | int64_t connection_id; as well as additional upcast functions like qapi_SpiceChannel_base(). Meanwhile, changes to qapi-visit.c look like: | static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp) | { | Error *err = NULL; | |- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err); |+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err); | if (err) { (the cast is necessary, since our upcast wrappers only deal with a single pointer, not pointer-to-pointer); plus the wholesale elimination of some now-unused visit_type_implicit_FOO() functions. Without boxing, the corner case of one empty struct having another empty struct as its base type now requires inserting a dummy member (previously, the 'Base *base' member sufficed). And now that we no longer consume a 'base' member in the generated C struct, we can delete the former negative struct-base-clash-base test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-30qmp/hmp: Add throttle ratio to query-migrate and info migrateJason J. Herne
Report throttle percentage in info migrate and query-migrate responses when cpu throttling is active. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2015-09-30migration: Parameters for auto-converge cpu throttlingJason J. Herne
Add migration parameters to allow the user to adjust the parameters that control cpu throttling when auto-converge is in effect. The added parameters are as follows: x-cpu-throttle-initial : Initial percantage of time guest cpus are throttled when migration auto-converge is activated. x-cpu-throttle-increment: throttle percantage increase each time auto-converge detects that migration is not making progress. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2015-09-04hmp: add info iothreads commandTing Wang
Make "info iothreads" available on the HMP monitor. For example, the results are as follows when executing qemu command with "-object iothread,id=iothread-1 -object iothread,id=iothread-2". (qemu) info iothreads iothread-1: thread_id=123 iothread-2: thread_id=456 Signed-off-by: Ting Wang <kathy.wangting@huawei.com> Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-07-02qmp: Add optional bool "unmap" to drive-mirrorFam Zheng
If specified as "true", it allows discarding on target sectors where source is not allocated. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qmp: Wean off qerror_report()Markus Armbruster
The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Eliminate QERR_DEVICE_NOT_FOUNDMarkus Armbruster
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used in new code. Hiding them in QERR_ macros makes new uses hard to spot. Fortunately, there's just one such macro left. Eliminate it with this coccinelle semantic patch: @@ expression EP, E; @@ -error_set(EP, QERR_DEVICE_NOT_FOUND, E) +error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22QemuOpts: Wean off qerror_report_err()Markus Armbruster
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qobject: Use 'bool' inside qdictEric Blake
Now that qbool is fixed, let's fix getting and setting a bool value to a qdict member to also use C99 bool rather than int. I audited all callers to ensure that the changed return type will not cause any changed semantics. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-12Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Fri Jun 12 15:57:47 2015 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: qemu-iotests: expand test 093 to support group throttling throttle: Update throttle infrastructure copyright throttle: add the name of the ThrottleGroup to BlockDeviceInfo throttle: acquire the ThrottleGroup lock in bdrv_swap() throttle: Add throttle group support throttle: Add throttle group infrastructure tests throttle: Add throttle group infrastructure throttle: Extract timers from ThrottleState into a separate structure raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size Revert "iothread: release iothread around aio_poll" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-12throttle: add the name of the ThrottleGroup to BlockDeviceInfoAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 172df91f09c69c6f0440a697bbd1b3f95b077ee4.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12throttle: Add throttle group supportAlberto Garcia
The throttle group support use a cooperative round robin scheduling algorithm. The principles of the algorithm are simple: - Each BDS of the group is used as a token in a circular way. - The active BDS computes if a wait must be done and arms the right timer. - If a wait must be done the token timer will be armed so the token will become the next active BDS. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12qmp/hmp: add rocker device supportScott Feldman
Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-02monitor: Use traditional command interface for HMP device_addMarkus Armbruster
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. For device_add, that's easy: just wrap the obvious hmp_device_add() around do_device_add(). monitor_user_noop() is now unused, drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Convert client_migrate_info to QAPIMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-07migration: Add hmp interface to set and query parametersLiang Li
Add the hmp interface to tune and query the parameters used in live migration. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-05qapi: Drop inline nested structs in query-pciEric Blake
A future patch will be using a 'name':{dictionary} entry in the QAPI schema to specify a default value for an optional argument (see previous commit message for more details why); but existing use of inline nested structs conflicts with that goal. This patch fixes one of only two commands relying on nested types, by breaking the nesting into an explicit type; it means that the type is now boxed instead of unboxed in C code, but the QMP wire format is unaffected by this change. Prefer the safer g_new0() while making the conversion, and reduce some long lines. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-05qapi: Drop inline nested struct in query-versionEric Blake
A future patch will be using a 'name':{dictionary} entry in the QAPI schema to specify a default value for an optional argument (see previous commit message for more details why); but existing use of inline nested structs conflicts with that goal. This patch fixes one of only two commands relying on nested types, by breaking the nesting into an explicit type; it means that the type is now boxed instead of unboxed in C code, but the QMP wire format is unaffected by this change. Prefer the safer g_new0() while making the conversion. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-04-28qmp: Add support of "dirty-bitmap" sync mode for drive-backupJohn Snow
For "dirty-bitmap" sync mode, the block job will iterate through the given dirty bitmap to decide if a sector needs backup (backup all the dirty clusters and skip clean ones), just as allocation conditions of "top" sync mode. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1429314609-29776-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28Revert "hmp: fix crash in 'info block -n -v'"Stefan Hajnoczi
This reverts commit 638b8366200130cc7cf7a026630bc6bfb63b0c4c. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-17hmp: fix crash in 'info block -n -v'Alberto Garcia
The image field in BlockDeviceInfo should never be null, however bdrv_block_device_info() is not filling it in. This makes the 'info block -n -v' command crash QEMU. The proper solution is probably to move the relevant code from bdrv_query_info() to bdrv_block_device_info(), but since we're too close to the release for that this simpler workaround solves the crash. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 1429274688-8115-1-git-send-email-berto@igalia.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-17Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20150317' ↵Peter Maydell
into staging migration/next for 20150317 # gpg: Signature made Tue Mar 17 14:21:14 2015 GMT using RSA key ID 5872D723 # gpg: Can't check signature: public key not found * remotes/juanquintela/tags/migration/20150317: migration: Expose 'cancelling' status to user migration: Convert 'status' of MigrationInfo to use an enum type hmp: Rename 'MigrationStatus' to 'HMPMigrationStatus' migration: Rename abbreviated macro MIG_STATE_* to MIGRATION_STATUS_* migration: Remove unused functions arch_init: Count the total number of pages by using helper function migrate_incoming: Cleanup/clarify error messages Warn against the use of the string as uri parameter to migrate-incoming migrate_incoming: use hmp_handle_error migration: Fix remaining 32 bit compiler errors migration: Fix some 32 bit compiler errors migration/rdma: clean up qemu_rdma_dest_init a bit migration: Avoid qerror_report_err() outside QMP command handlers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-17migration: Convert 'status' of MigrationInfo to use an enum typezhanghailiang
The original 'status' is an open-coded 'str' type, convert it to use an enum type. This conversion is backwards compatible, better documented and more convenient for future extensibility. In addition, Fix a typo for qapi-schema.json (just remove the typo) : s/'completed'. 'comppleted' (since 1.2)/'completed' (since 1.2) Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17hmp: Rename 'MigrationStatus' to 'HMPMigrationStatus'zhanghailiang
We will use the typename 'MigrationStatus' for publicly exported typename, So here we rename the internal-only 'MigrationStatus' to 'HMPMigrationStatus'. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17migrate_incoming: use hmp_handle_errorDr. David Alan Gilbert
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17qom: Implement qom-set HMP commandAndreas Färber
Re-implemented based on qmp_qom_set() to facilitate argument parsing. Warn about ambiguous path arguments. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17qom: Implement qom-list HMP commandAndreas Färber
Implement it as a wrapper for QMP qom-list, but mimic the behavior of scripts/qmp/qom-list in making the path argument optional and listing the root if absent, to hint users what kind of path to pass. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-16Add migrate_incomingDr. David Alan Gilbert
Add migrate_incoming/migrate-incoming to start an incoming migration. Once a qemu has been started with -incoming defer the migration can be started by issuing: migrate_incoming uri Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-04hmp: info spice: take out webdavGerd Hoffmann
Obvious suggestion for the next spice-protocol release: Add some way to #ifdef new stuff. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Cole Robinson <crobinso@redhat.com>
2015-03-03hmp: info spice: Show string channel nameCole Robinson
Useful for debugging. https://bugzilla.redhat.com/show_bug.cgi?id=822418 Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-26Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell
* remotes/qmp-unstable/queue/qmp: qapi-types: add C99 index names to arrays monitor: Fix missing err = NULL in client_migrate_info() balloon: Fix typo hmp: Fix warning from smatch (wrong argument in function call) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-25Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-02-18' ↵Peter Maydell
into staging hmp: Normalize HMP command handler names # gpg: Signature made Wed Feb 18 10:59:44 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-monitor-2015-02-18: hmp: Name HMP info handler functions hmp_info_SUBCOMMAND() hmp: Name HMP command handler functions hmp_COMMAND() hmp: Clean up declarations for long-gone info handlers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-23hmp: Fix warning from smatch (wrong argument in function call)Stefan Weil
Fix this warning: hmp.c:414:38: warning: Using plain integer as NULL pointer qmp_query_block expects a pointer argument, so passing false is wrong. Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-18hmp: Name HMP command handler functions hmp_COMMAND()Markus Armbruster
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(), and sometimes COMMAND pointlessly differs in spelling. Normalize to hmp_COMMAND(), where COMMAND is exactly the command name with '-' replaced by '_'. Exceptions: * do_device_add() and client_migrate_info() *not* renamed to hmp_device_add(), hmp_client_migrate_info(), because they're also QMP handlers. They still need to be converted to QAPI. * do_memory_dump(), do_physical_memory_dump(), do_ioport_read(), do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(), hmp_i(), hmp_o(), because those names are too cryptic for my taste. * do_info_help() renamed to hmp_info_help() instead of hmp_info(), because it only covers help. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-16qemu-io: Use BlockBackendMax Reitz
qemu-io should behave like a guest, therefore it should use BlockBackend to access the block layer. There are a couple of places where that is infeasible: First, the bdrv_debug_* functions could theoretically be mirrored in the BlockBackend, but since these are functions internal to the block layer, they should not be visible externally (qemu-io as a test tool is exempt from this). Second, bdrv_get_info() and bdrv_get_specific_info() work on a single BDS alone, therefore they should stay BDS-specific. Third, bdrv_is_allocated() mainly works on a single BDS as well. Some data may be passed through from the BDS's file (if sectors which are apparently allocated in the file are not really allocated there but just zero). [Fixed conflicts around block_acct_start() usage from Fam Zheng's "qemu-io: Account IO by aio_read and aio_write" commit. Use BlockBackend and blk_get_stats() instead of BlockDriverState. --Stefan] Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1423162705-32065-14-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06block: add accounting for merged requestsPeter Lieven
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-29hmp: Compile hmp_info_spice() only with CONFIG_SPICEMarkus Armbruster
It's dead code when CONFIG_SPICE is off. If it wasn't, it would crash dereferencing the null pointer returned by the qmp_query_spice() dummy in qmp.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-10block/hmp: Allow node-name in 'info block'Kevin Wolf
The optional parameter specifying a block device allows now to use a node-name instead of a drive name (and therefore to inspect any node in the graph). The new -n options allows listing all named nodes instead of BlockBackends. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/hmp: Allow info = NULL in print_block_info()Kevin Wolf
This allows printing infos of BlockDriverStates that aren't at the root of the graph (and logically implementing a BlockBackend). Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/hmp: Factor out print_block_info()Kevin Wolf
The new function prints the info for a single BlockDriverState. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10block/qapi: Add cache information to query-blockKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-12-10qmp: Add optional switch "query-nodes" in query-blockstatsFam Zheng
This bool option will allow query all the node names. It iterates all the BDSes that are assigned a name, also in this case don't query up the backing chain. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 19:36:35 +0000