aboutsummaryrefslogtreecommitdiff
path: root/hmp-commands.hx
AgeCommit message (Collapse)Author
2020-09-29cphp: remove deprecated cpu-add command(s)Igor Mammedov
These were deprecated since 4.0, remove both HMP and QMP variants. Users should use device_add command instead. To get list of possible CPUs and options, use 'info hotpluggable-cpus' HMP or query-hotpluggable-cpus QMP command. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200915120403.1074579-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-17qemu/: fix some comment spelling errorszhaolichang
I found that there are many spelling errors in the comments of qemu, so I used the spellcheck tool to check the spelling errors and finally found some spelling errors in the folder. Signed-off-by: zhaolichang <zhaolichang@huawei.com> Reviewed-by: Alex Bennee <alex.bennee@linaro.org> Message-Id: <20200917075029.313-2-zhaolichang@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-17hmp: Make json format optional for qom-setDavid Hildenbrand
Commit 7d2ef6dcc1cf ("hmp: Simplify qom-set") switched to the json parser, making it possible to specify complex types. However, with this change it is no longer possible to specify proper sizes (e.g., 2G, 128M), turning the interface harder to use for properties that consume sizes. Let's switch back to the previous handling and allow to specify passing json via the "-j" parameter. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200610075153.33892-1-david@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01hmp: Simplify qom-setDr. David Alan Gilbert
Simplify qom_set by making it use qmp_qom_set and the JSON parser. (qemu) qom-get /machine smm "auto" (qemu) qom-set /machine smm "auto" Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200520151108.160598-3-dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> With 's'->'S' type change suggested by Paolo and Markus
2020-06-01hmp: Implement qom-get HMP commandDr. David Alan Gilbert
This started off as Andreas Färber's implementation from March 2015, but after feedback from Paolo and Markus it morphed into using the json output which handles structs reasonably. Use with qom-list to find the members of an object. (qemu) qom-get /backend/console[0]/device/vga.rom[0] size 65536 (qemu) qom-get /machine smm "auto" (qemu) qom-get /machine rtc-time { "tm_year": 120, "tm_sec": 51, "tm_hour": 9, "tm_min": 50, "tm_mon": 4, "tm_mday": 20 } (qemu) qom-get /machine frob Error: Property '.frob' not found Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200520151108.160598-2-dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-12Update comments in .hx files that mention TexinfoPeter Maydell
Update the header comments in .hx files that mention STEXI/ETEXI markup; this is now SRST/ERST as all these files have been converted to rST. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
2020-03-09net: Remove deprecated [hub_id name] tuple of 'hostfwd_add' / 'hostfwd_remove'Thomas Huth
It's been deprecated since QEMU v3.1.0. Time to finally remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191205104109.18680-1-thuth@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reworked Thomas's deprecated.texi to the rst
2020-03-06*.hx: Remove all the STEXI/ETEXI blocksPeter Maydell
We no longer generate texinfo from the hxtool input files, so delete all the STEXI/ETEXI blocks. This commit was created using the following Perl one-liner: perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06hmp-commands.hx: Add rST documentation fragmentsPeter Maydell
Add the rST versions of the documentation fragments. Once we've converted fully from Texinfo to rST we can remove the ETEXI fragments; for the moment we need both. Since the only consumer of the hmp-commands hxtool documentation is the HTML manual, all we need to do for the monitor command documentation to appear in the Sphinx system manual is add the one line that invokes the hxtool extension on the .hx file. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200228153619.9906-21-peter.maydell@linaro.org
2019-12-19hmp: Allow using qdev ID for qemu-io commandKevin Wolf
In order to issue requests on an existing BlockBackend with the 'qemu-io' HMP command, allow specifying the BlockBackend not only with a BlockBackend name, but also with a qdev ID/QOM path for a device that owns the (possibly anonymous) BlockBackend. Because qdev names could be conflicting with BlockBackend and node names, introduce a -d option to explicitly address a device. If the option is not given, a BlockBackend or a node is addressed. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-08-21audio: add audiodev property to vnc and wav_captureKővágó, Zoltán
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: 8cbc9e865bbf40850c14340fc0549e6ac2d5fe9c.1566168923.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-07-02net/announce: Add HMP optional IDDr. David Alan Gilbert
Add the optional ID to the HMP command. e.g. # start an announce for a long time on eth1 migrate_set_parameter announce-rounds 1000 announce_self "eth1" e1 # start an announce on eth2 announce_self "eth2" e2 # Change e1 to be announcing on eth1 and eth3 announce_self "eth1,eth3" e1 # Cancel e1 migrate_set_parameter announce-rounds 0 announce_self "" e1 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02net/announce: Add HMP optional interface listDr. David Alan Gilbert
Add the optional interface list to the HMP command. i.e. All interfaces announce_self Just the named interfaces: announce_self vn1,vn2 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-06-17monitor: Rename HMP command type and tablesKevin Wolf
This renames the type for HMP monitor commands and the tables holding the commands to make clear that they are related to HMP and to allow making them public later: * mon_cmd_t -> HMPCommand (fixing use of a reserved name, too) * mon_cmds -> hmp_cmds * info_cmds -> hmp_info_cmds Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20190613153405.24769-7-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [sortcmdlist() cleaned up to make checkpatch.pl happy] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-05-01hmp: gva2gpa debug commandDr. David Alan Gilbert
Add a gva2gpa command purely for debug which performs address translation on the gva, the existing gpa2hva command can then also be used to find it in the qemu userspace; e.g. (qemu) info registers .... RSP=ffffffff81c03e98 .... (qemu) gva2gpa 0xffffffff81c03e98 gpa: 0x1c03e98 (qemu) gpa2hva 0x1c03e98 Host virtual address for 0x1c03e98 (pc.ram) is 0x7f0599a03e98 (qemu) x/10x 0xffffffff81c03e98 ffffffff81c03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff ffffffff81c03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000 ffffffff81c03eb8: 0x81c03ec8 0xffffffff gdb -p ...qemu... (gdb) x/10x 0x7f0599a03e98 0x7f0599a03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff 0x7f0599a03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000 0x7f0599a03eb8: 0x81c03ec8 0xffffffff Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190412152652.827-1-dgilbert@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-05hmp: Add hmp_announce_selfDr. David Alan Gilbert
Add an HMP command to trigger self annocements. Unlike the QMP command (which takes a set of parameters), the HMP command reuses the set of parameters used for migration. Signend-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-02-25block/snapshot.c: eliminate use of ID input in snapshot operationsDaniel Henrique Barboza
At this moment, QEMU attempts to create/load/delete snapshots by using either an ID (id_str) or a name. The problem is that the code isn't consistent of whether the entered argument is an ID or a name, causing unexpected behaviors. For example, when creating snapshots via savevm <arg>, what happens is that "arg" is treated as both name and id_str. In a guest without snapshots, create a single snapshot via savevm: (qemu) savevm 0 (qemu) info snapshots List of snapshots present on all disks: ID TAG VM SIZE DATE VM CLOCK -- 0 741M 2018-07-31 13:39:56 00:41:25.313 A snapshot with name "0" is created. ID is hidden from the user, but the ID is a non-zero integer that starts at "1". Thus, this snapshot has id_str=1, TAG="0". Creating a second snapshot with arg = 1, the first one is deleted: (qemu) savevm 1 (qemu) info snapshots List of snapshots present on all disks: ID TAG VM SIZE DATE VM CLOCK -- 1 741M 2018-07-31 13:42:14 00:41:55.252 What happened? - when creating the second snapshot, a verification is done inside bdrv_all_delete_snapshot to delete any existing snapshots that matches an string argument. Here, the code calls bdrv_all_delete_snapshot("1", ...); - bdrv_all_delete_snapshot calls bdrv_snapshot_find(..., "1") for each BlockDriverState of the guest. And this is where things goes tilting: bdrv_snapshot_find does a search by both id_str and name. It finds out that there is a snapshot that has id_str = 1, stores a reference to the snapshot in the sn_info pointer and then returns match found; - since a match was found, a call to bdrv_snapshot_delete_by_id_or_name() is made. This function ignores the pointer written by bdrv_snapshot_find. Instead, it deletes the snapshot using bdrv_snapshot_delete() calling it first with id_str = 1. If it fails to delete, then it calls it again with name = 1. - after all that, QEMU creates the new snapshot, that has id_str = 1 and name = 1. The user is left wondering that happened with the first snapshot created. Similar bugs can be triggered when using loadvm and delvm. Before contemplating discarding the use of ID input in these operations, I've searched the code of what would be the implications. My findings are: - the RBD and Sheepdog drivers don't care. Both uses the 'name' field as key in their logic, making id_str = name when appropriate. replay-snapshot.c does not make any special use of id_str; - qcow2 uses id_str as an unique identifier but it is automatically calculated, not being influenced by user input. Other than that, there are no distinguish operations made only with id_str; - in blockdev.c, the delete operation uses a match of both id_str AND name. Given that id_str is either a copy of 'name' or auto-generated, we're fine here. This gives motivation to not consider ID as a valid user input in HMP commands - sticking with 'name' input only is more consistent. To accomplish that, the following changes were made in this patch: - bdrv_snapshot_find() does not match for id_str anymore, only 'name'. The function is called in save_snapshot(), load_snapshot(), bdrv_all_delete_snapshot() and bdrv_all_find_snapshot(). This change makes the search function more predictable and does not change the behavior of any underlying code that uses these affected functions, which are related to HMP (which is fine) and the main loop inside vl.c (which doesn't care about it anyways); - bdrv_all_delete_snapshot() does not call bdrv_snapshot_delete_by_id_or_name anymore. Instead, it uses the pointer returned by bdrv_snapshot_find to erase the snapshot with the exact match of id_str an name. This function is called in save_snapshot and hmp_delvm, thus this change produces the intended effect; - documentation changes to reflect the new behavior. I consider this to be an API fix instead of an API change - the user was already creating snapshots using 'name', but now he/she will also enjoy a consistent behavior. Ideally we would get rid of the id_str field entirely, but this would have repercussions on existing snapshots. Another day perhaps. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-12-11Deprecate HMP `cpu-add`Kashyap Chamarthy
Since we're deprecating the QMP `cpu-add`, let's deprecate its HMP equivalent, too. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> Message-Id: <20181030123526.26415-3-kchamart@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-08-23hmp-commands: add sync-profileEmilio G. Cota
The command introduced here is just for developers. This means that: - the interface implemented here could change in the future - the command is only meant to be used from HMP, not from QMP Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-15block: Remove deprecated -drive geometry optionsKevin Wolf
This reinstates commit a7aff6dd10b16b67e8b142d0c94c5d92c3fe88f6, which was temporarily reverted for the 3.0 release so that libvirt gets some extra time to update their command lines. The -drive options cyls, heads, secs and trans were deprecated in QEMU 2.10. It's time to remove them. hd-geo-test tested both the old version with geometry options in -drive and the new one with -device. Therefore the code using -drive doesn't have to be replaced there, we just need to remove the -drive test cases. This in turn allows some simplification of the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-07-10Revert "block: Remove deprecated -drive geometry options"Cornelia Huck
This reverts commit a7aff6dd10b16b67e8b142d0c94c5d92c3fe88f6. Hold off removing this for one more QEMU release (current libvirt release still uses it.) Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-29dump: add Windows dump format to dump-guest-memoryViktor Prutyanov
This patch adds Windows crashdumping feature. Now QEMU can produce ELF-dump containing Windows crashdump header, which can help to convert to a valid WinDbg-understandable crashdump file, or immediately create such file. The crashdump will be obtained by joining physical memory dump and 8K header exposed through vmcoreinfo/fw_cfg device by guest driver at BSOD time. Option '-w' was added to dump-guest-memory command. At the moment, only x64 configuration is supported. Suitable driver can be found at https://github.com/virtio-win/kvm-guest-drivers-windows/tree/master/fwcfg64 Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180517162342.4330-2-viktor.prutyanov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-21hmp: add exit_preconfigDr. David Alan Gilbert
Add the exit_preconfig command to return to normality. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20180620153947.30834-7-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp: Add commands for preconfigDr. David Alan Gilbert
Allow a bunch of the info commands to be used in preconfig. version, chardev, name, uuid,memdev, iothreads Were enabled in QMP in the previous patch from Igor status, hotpluggable_cpus Was enabled in the original allow-preconfig series history is HMP specific qom-tree Don't have a QMP equivalent Also enable the qom commands qom-list and qom-set. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180620153947.30834-6-dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Dropped info numa as per Igor's 2018-06-21 review
2018-06-21hmp: Allow help on preconfig commandsDr. David Alan Gilbert
Allow the 'help' command in preconfig state but make it only list the preconfig commands. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20180620153947.30834-3-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21hmp-commands: use long for begin and length in dump-guest-memorySuraj Jitindar Singh
The dump-guest-memory command is used to dump an area of guest memory to a file, the piece of memory is specified by a begin address and a length. These parameters are specified as ints and thus have a maximum value of 4GB. This means you can't dump the guest memory past the first 4GB and instead get: (qemu) dump-guest-memory tmp 0x100000000 0x100000000 'dump-guest-memory' has failed: integer is for 32-bit values Try "help dump-guest-memory" for more information This limitation is imposed in monitor_parse_arguments() since they are both ints. hmp_dump_guest_memory() uses 64 bit quantities to store both the begin and length values. Thus specify begin and length as long so that the entire guest memory space can be dumped. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20180620003202.10546-1-sjitindarsingh@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-15block: Remove deprecated -drive geometry optionsKevin Wolf
The -drive options cyls, heads, secs and trans were deprecated in QEMU 2.10. It's time to remove them. hd-geo-test tested both the old version with geometry options in -drive and the new one with -device. Therefore the code using -drive doesn't have to be replaced there, we just need to remove the -drive test cases. This in turn allows some simplification of the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-05-15migration/hmp: add migrate_pause commandPeter Xu
Wrapper for QMP command "migrate-pause". Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-25-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-05-15hmp/migration: add migrate_recover commandPeter Xu
Sister command to migrate-recover in QMP. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-22-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-05-15qmp: hmp: add migrate "resume" optionPeter Xu
It will be used when we want to resume one paused migration. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-8-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- s/2.12/2.13/
2018-05-15hmp: Allow using a qdev id in block_set_io_throttleAlberto Garcia
The QMP version of this command can take a qdev ID since 7a9877a02635, but the HMP version is still using the deprecated block device name so there's no way to refer to a block device added like this: -blockdev node-name=disk0,driver=qcow2,file.driver=file,file.filename=hd.qcow2 -device virtio-blk-pci,id=virtio-blk-pci0,drive=disk0 This patch works around this problem by using the specified name as a qdev ID if the block device name is not found. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19block/mirror: change the semantic of 'force' of block-job-cancelLiang Li
When doing drive mirror to a low speed shared storage, if there was heavy BLK IO write workload in VM after the 'ready' event, drive mirror block job can't be canceled immediately, it would keep running until the heavy BLK IO workload stopped in the VM. Libvirt depends on the current block-job-cancel semantics, which is that when used without a flag after the 'ready' event, the command blocks until data is in sync. However, these semantics are awkward in other situations, for example, people may use drive mirror for realtime backups while still wanting to use block live migration. Libvirt cannot start a block live migration while another drive mirror is in progress, but the user would rather abandon the backup attempt as broken and proceed with the live migration than be stuck waiting for the current drive mirror backup to finish. The drive-mirror command already includes a 'force' flag, which libvirt does not use, although it documented the flag as only being useful to quit a job which is paused. However, since quitting a paused job has the same effect as abandoning a backup in a non-paused job (namely, the destination file is not in sync, and the command completes immediately), we can just improve the documentation to make the force flag obviously useful. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: John Snow <jsnow@redhat.com> Reported-by: Huaitong Han <huanhuaitong@didichuxing.com> Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com> Signed-off-by: Liang Li <liliangleo@didichuxing.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-12qapi: Add device ID and head parameters to screendumpThomas Huth
QEMU's screendump command can only take dumps from the primary display. When using multiple VGA cards, there is no way to get a dump from a secondary card or other display heads yet. So let's add a 'device' and a 'head' parameter to the HMP and QMP commands to be able to specify alternative devices and heads with the screendump command, too. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1520267868-31778-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-03-05net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commandsThomas Huth
They are deprecated since QEMU v2.10, and so far nobody complained that these commands are still necessary for any reason - and since you can use 'netdev_add' and 'netdev_remove' instead, there also should not be any real reason. Since they are also standing in the way for the upcoming 'vlan' clean-up, it's now time to remove them. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-02-14migration: improve documentation of postcopy-ramGreg Kurz
This capability must have the same value on both source and destination, otherwise migration fails (commit 875fcd013ab6 "migration: incoming postcopy advise sanity checks"). Let's write it down in various places where postcopy-ram is documented. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <151801810352.29167.4832480228518630626.stgit@bahia.lan> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-01-29Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 29 Jan 2018 08:14:19 GMT # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: MAINTAINERS: update Dmitry Fleytman email qemu-doc: Get rid of "vlan=X" example in the documentation net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove' net: Allow hubports to connect to other netdevs colo: compare the packet based on the tcp sequence number colo: modified the payload compare function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-29net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'Thomas Huth
It does not make much sense to limit these commands to the legacy 'vlan' concept only, they should work with the modern netdevs, too. So now it is possible to use this command with one, two or three parameters. With one parameter, the command installs a hostfwd rule on the default "user" network: hostfwd_add tcp:... With two parameters, the command installs a hostfwd rule on a netdev (that's the new way of using this command): hostfwd_add netdev_id tcp:... With three parameters, the command installs a rule on a 'vlan' (aka hub): hostfwd_add hub_id name tcp:... Same applies to the hostfwd_remove command now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-26hmp: Add nbd_server_remove to mirror QMP commandEric Blake
Since everything else about the nbd-server-* QMP commands is accessible from HMP, we might as well make removing an export available as well. For now, I went with a bool flag rather than a mode string for choosing between safe (default) and hard modes. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20180125144557.25502-1-eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-01-26hmp: Add name parameter to nbd_server_addEric Blake
Extend the flexibility of the previous QMP patch to also work in HMP. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180109192802.17167-1-eblake@redhat.com>
2017-12-14hmp-commands: Remove the deprecated usb_add and usb_delThomas Huth
It's easy to use device_add and device_del as replacement instead. The usb_add and usb_del commands are deprecated since QEMU 2.10, and nobody complained that they are still needed, so let's get rid of them now to make the HMP interface a little bit less overloaded. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-23migrate: HMP migate_continueDr. David Alan Gilbert
HMP equivalent to the just added migrate-continue Unpause a migrate paused at a given state. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-14Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into ↵Peter Maydell
staging s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups - add a network boot rom for s390 (Thomas Huth) - migration of storage attributes like the CMMA used/unused state - PCI related enhancements - full support for aen, ais and zpci - migration support for css with vmstates (Halil Pasic) - cpu model enhancements for cpu features - guarded storage support # gpg: Signature made Fri 14 Jul 2017 11:33:04 BST # gpg: using RSA key 0x117BBC80B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" # Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C * remotes/borntraeger/tags/s390x-20170714: (40 commits) s390x/gdb: add gs registers s390x/arch_dump: also dump guarded storage control block s390x/kvm: enable guarded storage s390x/kvm: Enable KSS facility for nested virtualization s390x/cpumodel: add esop/esop2 to z12 model s390x/cpumodel: we are always in zarchitecture mode s390x/cpumodel: wire up new hardware features s390x/flic: migrate ais states s390x/cpumodel: add zpci, aen and ais facilities s390x: initialize cpu firstly pc-bios/s390: rebuild s390-ccw.img pc-bios/s390: add s390-netboot.img pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load pc-bios/s390-ccw: Add virtio-net driver code pc-bios/s390-ccw: Add core files for the network bootloading program roms/SLOF: Update submodule to latest status pc-bios/s390-ccw: Add code for virtio feature negotiation pc-bios/s390-ccw: Remove unused structs from virtio.h pc-bios/s390-ccw: Move byteswap functions to a separate header pc-bios/s390-ccw: Add a write() function for stdio ... Conflicts: target/s390x/kvm.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14s390x/migration: Monitor commands for storage attributesClaudio Imbrenda
Add an "info" monitor command to non-destructively inspect the state of the storage attributes of the guest, and a normal command to toggle migration mode (useful for debugging). Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14hmp: add hmp analogue for qmp-chardev-changeAnton Nefedov
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-11block: remove all encryption handling APIsDaniel P. Berrange
Now that all encryption keys must be provided upfront via the QCryptoSecret API and associated block driver properties there is no need for any explicit encryption handling APIs in the block layer. Encryption can be handled transparently within the block driver. We only retain an API for querying whether an image is encrypted or not, since that is a potentially useful piece of metadata to report to the user. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-18-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-29Add chardev-send-break monitor commandStefan Fritsch
Sending a break on a serial console can be useful for debugging the guest. But not all chardev backends support sending breaks (only telnet and mux do). The chardev-send-break command allows to send a break even if using other backends. Signed-off-by: Stefan Fritsch <sf@sfritsch.de> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170611074817.13621-1-sf@sfritsch.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Use 'send a break' in all 3 pieces of text as suggested by eblake
2017-05-29usb: Deprecate HMP commands usb_add and usb_delThomas Huth
The commands 'device_add' and 'device_del' should be used nowadays instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1495175803-12830-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-23hmp / net: Mark host_net_add/remove as deprecatedThomas Huth
The netdev_add and netdev_del commands should be used nowadays instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-26hmp: gpa2hva and gpa2hpa hostaddr commandPaolo Bonzini
These commands are useful when testing machine-check passthrough. gpa2hva is useful to inject a MADV_HWPOISON madvise from gdb, while gpa2hpa is useful to inject an error with the mce-inject kernel module. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1490021158-4469-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170420133058.12911-1-pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2016-10-30COLO: Add 'x-colo-lost-heartbeat' command to trigger failoverzhanghailiang
We leave users to choose whatever heartbeat solution they want, if the heartbeat is lost, or other errors they detect, they can use experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover, COLO will do operations accordingly. For example, if the command is sent to the Primary side, the Primary side will exit COLO mode, does cleanup work, and then, PVM will take over the service work. If sent to the Secondary side, the Secondary side will run failover work, then takes over PVM's service work. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 05:05:17 +0000