aboutsummaryrefslogtreecommitdiff
path: root/hmp-commands.hx
AgeCommit message (Collapse)Author
2018-03-05net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commandsThomas Huth
They are deprecated since QEMU v2.10, and so far nobody complained that these commands are still necessary for any reason - and since you can use 'netdev_add' and 'netdev_remove' instead, there also should not be any real reason. Since they are also standing in the way for the upcoming 'vlan' clean-up, it's now time to remove them. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-02-14migration: improve documentation of postcopy-ramGreg Kurz
This capability must have the same value on both source and destination, otherwise migration fails (commit 875fcd013ab6 "migration: incoming postcopy advise sanity checks"). Let's write it down in various places where postcopy-ram is documented. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <151801810352.29167.4832480228518630626.stgit@bahia.lan> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-01-29Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 29 Jan 2018 08:14:19 GMT # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: MAINTAINERS: update Dmitry Fleytman email qemu-doc: Get rid of "vlan=X" example in the documentation net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove' net: Allow hubports to connect to other netdevs colo: compare the packet based on the tcp sequence number colo: modified the payload compare function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-29net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'Thomas Huth
It does not make much sense to limit these commands to the legacy 'vlan' concept only, they should work with the modern netdevs, too. So now it is possible to use this command with one, two or three parameters. With one parameter, the command installs a hostfwd rule on the default "user" network: hostfwd_add tcp:... With two parameters, the command installs a hostfwd rule on a netdev (that's the new way of using this command): hostfwd_add netdev_id tcp:... With three parameters, the command installs a rule on a 'vlan' (aka hub): hostfwd_add hub_id name tcp:... Same applies to the hostfwd_remove command now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-26hmp: Add nbd_server_remove to mirror QMP commandEric Blake
Since everything else about the nbd-server-* QMP commands is accessible from HMP, we might as well make removing an export available as well. For now, I went with a bool flag rather than a mode string for choosing between safe (default) and hard modes. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20180125144557.25502-1-eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-01-26hmp: Add name parameter to nbd_server_addEric Blake
Extend the flexibility of the previous QMP patch to also work in HMP. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180109192802.17167-1-eblake@redhat.com>
2017-12-14hmp-commands: Remove the deprecated usb_add and usb_delThomas Huth
It's easy to use device_add and device_del as replacement instead. The usb_add and usb_del commands are deprecated since QEMU 2.10, and nobody complained that they are still needed, so let's get rid of them now to make the HMP interface a little bit less overloaded. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-23migrate: HMP migate_continueDr. David Alan Gilbert
HMP equivalent to the just added migrate-continue Unpause a migrate paused at a given state. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-14Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into ↵Peter Maydell
staging s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups - add a network boot rom for s390 (Thomas Huth) - migration of storage attributes like the CMMA used/unused state - PCI related enhancements - full support for aen, ais and zpci - migration support for css with vmstates (Halil Pasic) - cpu model enhancements for cpu features - guarded storage support # gpg: Signature made Fri 14 Jul 2017 11:33:04 BST # gpg: using RSA key 0x117BBC80B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" # Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C * remotes/borntraeger/tags/s390x-20170714: (40 commits) s390x/gdb: add gs registers s390x/arch_dump: also dump guarded storage control block s390x/kvm: enable guarded storage s390x/kvm: Enable KSS facility for nested virtualization s390x/cpumodel: add esop/esop2 to z12 model s390x/cpumodel: we are always in zarchitecture mode s390x/cpumodel: wire up new hardware features s390x/flic: migrate ais states s390x/cpumodel: add zpci, aen and ais facilities s390x: initialize cpu firstly pc-bios/s390: rebuild s390-ccw.img pc-bios/s390: add s390-netboot.img pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load pc-bios/s390-ccw: Add virtio-net driver code pc-bios/s390-ccw: Add core files for the network bootloading program roms/SLOF: Update submodule to latest status pc-bios/s390-ccw: Add code for virtio feature negotiation pc-bios/s390-ccw: Remove unused structs from virtio.h pc-bios/s390-ccw: Move byteswap functions to a separate header pc-bios/s390-ccw: Add a write() function for stdio ... Conflicts: target/s390x/kvm.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14s390x/migration: Monitor commands for storage attributesClaudio Imbrenda
Add an "info" monitor command to non-destructively inspect the state of the storage attributes of the guest, and a normal command to toggle migration mode (useful for debugging). Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14hmp: add hmp analogue for qmp-chardev-changeAnton Nefedov
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-11block: remove all encryption handling APIsDaniel P. Berrange
Now that all encryption keys must be provided upfront via the QCryptoSecret API and associated block driver properties there is no need for any explicit encryption handling APIs in the block layer. Encryption can be handled transparently within the block driver. We only retain an API for querying whether an image is encrypted or not, since that is a potentially useful piece of metadata to report to the user. Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170623162419.26068-18-berrange@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-29Add chardev-send-break monitor commandStefan Fritsch
Sending a break on a serial console can be useful for debugging the guest. But not all chardev backends support sending breaks (only telnet and mux do). The chardev-send-break command allows to send a break even if using other backends. Signed-off-by: Stefan Fritsch <sf@sfritsch.de> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170611074817.13621-1-sf@sfritsch.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Use 'send a break' in all 3 pieces of text as suggested by eblake
2017-05-29usb: Deprecate HMP commands usb_add and usb_delThomas Huth
The commands 'device_add' and 'device_del' should be used nowadays instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1495175803-12830-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-23hmp / net: Mark host_net_add/remove as deprecatedThomas Huth
The netdev_add and netdev_del commands should be used nowadays instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-26hmp: gpa2hva and gpa2hpa hostaddr commandPaolo Bonzini
These commands are useful when testing machine-check passthrough. gpa2hva is useful to inject a MADV_HWPOISON madvise from gdb, while gpa2hpa is useful to inject an error with the mce-inject kernel module. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1490021158-4469-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20170420133058.12911-1-pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2016-10-30COLO: Add 'x-colo-lost-heartbeat' command to trigger failoverzhanghailiang
We leave users to choose whatever heartbeat solution they want, if the heartbeat is lost, or other errors they detect, they can use experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover, COLO will do operations accordingly. For example, if the command is sent to the Primary side, the Primary side will exit COLO mode, does cleanup work, and then, PVM will take over the service work. If sent to the Secondary side, the Secondary side will run failover work, then takes over PVM's service work. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-09-19monitor: remove mhandler.cmd_newMarc-André Lureau
This is no longer necessary now that we aren't using middle mode anymore. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-05drive-backup: added support for data compressionPavel Butsykin
The idea is simple - backup is "written-once" data. It is written block by block and it is large enough. It would be nice to save storage space and compress it. The patch adds a flag to the qmp/hmp drive-backup command which enables block compression. Compression should be implemented in the format driver to enable this feature. There are some limitations of the format driver to allow compressed writes. We can write data only once. Though for backup this is perfectly fine. These limitations are maintained by the driver and the error will be reported if we are doing something wrong. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-18trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing stateLluís Vilanova
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-05-26migration: define 'tls-creds' and 'tls-hostname' migration parametersDaniel P. Berrange
Define two new migration parameters to be used with TLS encryption. The 'tls-creds' parameter provides the ID of an instance of the 'tls-creds' object type, or rather a subclass such as 'tls-creds-x509'. Providing these credentials will enable use of TLS on the migration data stream. If using x509 certificates, together with a migration URI that does not include a hostname, the 'tls-hostname' parameter provides the hostname to use when verifying the server's x509 certificate. This allows TLS to be used in combination with fd: and exec: protocols where a TCP connection is established by a 3rd party outside of QEMU. NB, this requires changing the migrate_set_parameter method in the HMP to accept a 's' (string) value instead of 'i' (integer). This is backwards compatible, because the parsing of strings allows the quotes to be optional, thus any integer is also a valid string. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1461751518-12128-26-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-03-14hmp: 'drive_add -n' for creating a node without BBKevin Wolf
This patch adds an option to the drive_add HMP command to create only a BlockDriverState without a BlockBackend on top. The motivation for this is that libvirt needs to specify options to a migration target (specifically, detect-zeroes). drive-mirror doesn't allow specifying options, and the proper way to do this is to create the target BDS separately with blockdev-add (where you can specify options) and then use blockdev-mirror to that BDS. However, libvirt can't use blockdev-add as long as it is still experimental, and we're expecting that it will still take some time, so we need to resort to drive_add. The problem with drive_add is that so far it always created a BB, and BDSes with a BB can't be used as a mirroring target as long as we don't support multiple BBs per BDS - and while we're working towards that goal, it's another thing that will still take some time. So to achieve the goal, the simplest solution to provide the functionality now without adding one-off options to the mirror QMP commands is to extend drive_add to create nodes without BBs. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-11postcopy: Remove the x-Dr. David Alan Gilbert
Postcopy seems to have survived a cycle with only a few fixes, and Jiri has the current libvirt wired up and working ( https://www.redhat.com/archives/libvir-list/2016-March/msg00080.html ) so remove the experimental tag. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1457690016-9070-3-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-22dump-guest-memory: add "detach" flag for QMP/HMP interfaces.Peter Xu
This patch only adds the interfaces, but does not implement them. "detach" parameter is made optional, to make sure that all the old dump-guest-memory requests will still be able to work. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1455772616-8668-3-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-12migrate-start-postcopy: Improve textDr. David Alan Gilbert
Improve the text in both the qapi-schema and hmp help to point out you need to set the postcopy-ram capability prior to issuing migrate-start-postcopy. Also fix the text of the migrate_start_postcopy error that deals with capabilities. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-11hmp: Add read-only-mode option to change commandMax Reitz
Expose the new read-only-mode option of 'blockdev-change-medium' for the 'change' HMP command. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-10migrate_start_postcopy: Command to trigger transition to postcopyDr. David Alan Gilbert
Once postcopy is enabled (with migrate_set_capability), the migration will still start on precopy mode. To cause a transition into postcopy the: migrate_start_postcopy command must be issued. Postcopy will start sometime after this (when it's next checked in the migration loop). Issuing the command before migration has started will error, and issuing after it has finished is ignored. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-09-22monitor: allow device_del to accept QOM pathsDaniel P. Berrange
Currently device_del requires that the client provide the device short ID. device_add allows devices to be created without giving an ID, at which point there is no way to delete them with device_del. The QOM object path, however, provides an alternative way to identify the devices. Allowing device_del to accept an object path ensures all devices are deletable regardless of whether they have an ID. (qemu) device_add usb-mouse (qemu) qom-list /machine/peripheral-anon device[0] (child<usb-mouse>) type (string) (qemu) device_del /machine/peripheral-anon/device[0] Devices are required to be marked as hotpluggable otherwise an error is raised (qemu) device_del /machine/unattached/device[4] Device 'PIIX3' does not support hotplugging Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1441974836-17476-1-git-send-email-berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Commit message touched up, accidental white-space change dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-16monitor: added generation of documentation for hmp-commands-info.hxPavel Butsykin
It will be easier if you need to add info-commands to edit only hmp-commands-info.hx, before this had to edit monitor.c and hmp-commands.hx. From the build point of view all documentation is saved into qemu-monitor-info.texi which from now on is used for all user documentation building. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16hmp-commands.hx: fix end of table infoPavel Butsykin
The table info(information about the system state) closes earlier and some of its elements are outside(trace-events, rocker, etc). This can be confusing and lead to additional bugs. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-4-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-04hmp: add info iothreads commandTing Wang
Make "info iothreads" available on the HMP monitor. For example, the results are as follows when executing qemu command with "-object iothread,id=iothread-1 -object iothread,id=iothread-2". (qemu) info iothreads iothread-1: thread_id=123 iothread-2: thread_id=456 Signed-off-by: Ting Wang <kathy.wangting@huawei.com> Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-03Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Thu 03 Sep 2015 15:46:52 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/tracing-pull-request: trace-events: Add hmp completion Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-03trace-events: Add hmp completionDr. David Alan Gilbert
Add completion for the trace event names in the hmp trace-event command. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-03s390x: Info skeys sub-commandJason J. Herne
Provide an info skeys hmp sub-command to allow the end user to dump a storage key for a given address. This is useful for guest operating system developers. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-03s390x: Dump-skeys hmp supportJason J. Herne
Add dump-skeys command to the human monitor. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-06-12qmp/hmp: add rocker device supportScott Feldman
Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-02monitor: Use trad. command interface for HMP pcie_aer_inject_errorMarkus Armbruster
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. pcie_aer_inject_error's implementation is split into the hmp_pcie_aer_inject_error() and pcie_aer_inject_error_print(). The former is a peculiar crossbreed between HMP and QMP handler. On success, it works like a QMP handler: store QDict through ret_data parameter, return 0. Printing the QDict is left to pcie_aer_inject_error_print(). On failure, it works more like an HMP handler: print error to monitor, return negative number. To convert to the traditional interface, turn pcie_aer_inject_error_print() into a command handler wrapping around hmp_pcie_aer_inject_error(). By convention, this command handler should be called hmp_pcie_aer_inject_error(), so rename the existing hmp_pcie_aer_inject_error() to do_pcie_aer_inject_error(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Use traditional command interface for HMP device_addMarkus Armbruster
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. For device_add, that's easy: just wrap the obvious hmp_device_add() around do_device_add(). monitor_user_noop() is now unused, drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Use traditional command interface for HMP drive_delMarkus Armbruster
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. For drive_del, that's easy: hmp_drive_del() sheds its unused last parameter, and its return value, which the caller ignored anyway. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Convert client_migrate_info to QAPIMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Improve and document client_migrate_info protocol errorMarkus Armbruster
Protocol must be spice, vnc isn't implemented. Fix up documentation. Attempts to use vnc or any other unknown protocol yield the misleading error message "Invalid parameter 'protocol'". Improve it to "Parameter 'protocol' expects spice". Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by. Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-07migration: Add hmp interface to set and query parametersLiang Li
Add the hmp interface to tune and query the parameters used in live migration. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-04-27monitor: Make client_migrate_info synchronousMarkus Armbruster
Live migration with spice works like this today: (1) client_migrate_info monitor cmd (2) spice server notifies client, client connects to target host. (3) qemu waits until spice client connect is finished. (4) send over vmstate (i.e. main part of live migration). (5) spice handover to target host. (3) is implemented by making client_migrate_info a async monitor command. This is the only async monitor command we have. The original reason to implement this dance was that qemu did not accept new tcp connections while the incoming migration was running, so (2) and (4) could not be done in parallel. That issue was fixed long ago though. Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp connects while the incoming migration runs. Time to drop step (3). This patch does exactly that, by making the monitor command synchronous and removing the code needed to handle the async monitor command in ui/spice-core.c Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-19hmp: Fix texinfo documentationMarkus Armbruster
Several issues: * Commands i and o lack @item. Their one-liner documentation gets squashed into the preceding command print. Add the obvious @item. * Commands i, o and cpu-add lack @findex. The function index doesn't have them. Add the obvious @findex. * Commit 727f005 put block_set_io_throttle was added in the middle of block_passwd. Move it. * Correct spelling of commands chardev-add and chardev-remove in @item and @findex. * Some commands have a blank line between @item/@findex and the text, most don't. Normalize to no blank line. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19hmp: Fix definition of command quitMarkus Armbruster
The command handler is a union of two function types. If cmd->user_print is set, handle_user_command() calls cmd->mhandler.cmd_new(), else cmd->mhandler.cmd(). Command definitions must therefore either set both user_print() and mhandler.cmd_new(), or only mhandler.cmd(). quit's sets user_print and mhandler.cmd(). handle_user_command() calls hmp_quit() through mhandler.cmd_new() rather than mhandler.cmd(), i.e. through a function pointer with a different type. Broken in commit 7a7f325, v1.0. Works in practice because hmp_quit() doesn't use its arguments, and handle_user_command() ignores its function value. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-17qom: Implement info qom-tree HMP commandAndreas Färber
To complement qdev's bus-oriented info qtree, info qom-tree prints a hierarchical view of the QOM composition tree. By default, the machine composition tree is shown. This can be overriden by supplying a path argument, such as "info qom-tree /". Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17qom: Implement qom-set HMP commandAndreas Färber
Re-implemented based on qmp_qom_set() to facilitate argument parsing. Warn about ambiguous path arguments. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17qom: Implement qom-list HMP commandAndreas Färber
Implement it as a wrapper for QMP qom-list, but mimic the behavior of scripts/qmp/qom-list in making the path argument optional and listing the root if absent, to hint users what kind of path to pass. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-16Add migrate_incomingDr. David Alan Gilbert
Add migrate_incoming/migrate-incoming to start an incoming migration. Once a qemu has been started with -incoming defer the migration can be started by issuing: migrate_incoming uri Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-01pci-hotplug-old: Has been dead for five major releases, buryMarkus Armbruster
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make variable, not as preprocessor macro, killing the code conditional on defined(CONFIG_PCI_HOTPLUG_OLD). In all this time, nobody reported the loss. I only noticed it when I tried to test some error reporting change that forced me to touch this old crap again. Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward compatibility god has been strong enough to sacrifice at its altar about a dozen times, but not strong enough to even once verify the legacy feature's still there, let alone works. Remove the commands along with the code backing them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 05:22:28 +0000