| Age | Commit message (Collapse) | Author |
|---|
|
When CONFIG_MOS6522 is not set, building ppc64-softmmu target fails:
/usr/bin/ld: libqemu-ppc64-softmmu.fa.p/monitor_misc.c.o:(.data+0x1158): undefined reference to `hmp_info_via'
Make devices configuration available in hmp-commands*.hx and check for
CONFIG_MOS6522.
Fixes: 409e9f7131e5 (mos6522: add "info via" HMP command for debugging)
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220510235439.54775-1-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
|
|
This displays detailed information about the device registers and timers to aid
debugging problems with timers and interrupts.
Currently the QAPI generators for HumanReadableText don't work correctly if
used in qapi/target-misc.json when a non-specified target is built, so for
now manually add a hmp_info_via() wrapper until direct support for per-device
HMP/QMP commands is implemented.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
As --enable-profiler isn't defended in CI we missed this breakage.
Move the qmp handler into accel/tcg so we have access to the helpers
we need. While we are at it ensure we gate the feature on CONFIG_TCG.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 37087fde0e ("qapi: introduce x-query-profile QMP command")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/773
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220105135009.1584676-23-alex.bennee@linaro.org>
|
|
This is a counterpart to the HMP "info irq" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
This is a counterpart to the HMP "info ramblock" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
This is a counterpart to the HMP "info rdma" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
This is a counterpart to the HMP "info usb" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
This is a counterpart to the HMP "info numa" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
This is a counterpart to the HMP "info profile" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
This is a counterpart to the HMP "info roms" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
This command was turned into a no-op four years ago in
commit 0c8465440d50c18a7bb13d0a866748f0593e193a
Author: Peter Xu <peterx@redhat.com>
Date: Fri Dec 29 15:31:04 2017 +0800
hmp: obsolete "info ioapic"
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The QMP and HMP interfaces can be used by monitor or QMP tools to retrieve
the SGX information from VM side when SGX is enabled on Intel platform.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
One more little step towards modular tcg ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-35-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-33-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
These two commands are missing when adding the QMP sister commands.
Add them, so developers can play with them easier.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <4cc0039fc3ad6145136770cf3b0f056c09a2910b.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Since ppc was the last architecture to collect these statistics and
it is currently phasing this collection out, the command that would query
this information is being removed.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-5-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
This patch introduces 'info replay' monitor command and
corresponding qmp request.
These commands request the current record/replay mode, replay log file
name, and the instruction count (number of recorded/replayed
instructions). The instruction count can be used with the
replay_seek/replay_break commands added in the next two patches.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <160174520026.12451.13112161947433306561.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We might have many disabled memory regions, making the 'info mtree'
output too verbose to be useful.
Remove the disabled regions in the default output, but allow the
monitor user to display them using the '-D' option.
Before:
(qemu) info mtree
memory-region: system
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff
00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c0000-00000000000c3fff [disabled]
00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c0000-00000000000c3fff [disabled]
00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c0000-00000000000c3fff [disabled]
00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c4000-00000000000c7fff [disabled]
00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c4000-00000000000c7fff [disabled]
00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c4000-00000000000c7fff [disabled]
00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000c8000-00000000000cbfff [disabled]
00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000c8000-00000000000cbfff [disabled]
00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000c8000-00000000000cbfff [disabled]
00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff
00000000000cc000-00000000000cffff (prio 1, ram): alias pam-ram @pc.ram 00000000000cc000-00000000000cffff [disabled]
00000000000cc000-00000000000cffff (prio 1, ram): alias pam-pci @pc.ram 00000000000cc000-00000000000cffff [disabled]
00000000000cc000-00000000000cffff (prio 1, ram): alias pam-rom @pc.ram 00000000000cc000-00000000000cffff [disabled]
00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff
00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d0000-00000000000d3fff [disabled]
00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d0000-00000000000d3fff [disabled]
00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d0000-00000000000d3fff [disabled]
00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff
00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d4000-00000000000d7fff [disabled]
00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d4000-00000000000d7fff [disabled]
00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d4000-00000000000d7fff [disabled]
00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff
00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000d8000-00000000000dbfff [disabled]
00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000d8000-00000000000dbfff [disabled]
00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000d8000-00000000000dbfff [disabled]
00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff
00000000000dc000-00000000000dffff (prio 1, ram): alias pam-ram @pc.ram 00000000000dc000-00000000000dffff [disabled]
00000000000dc000-00000000000dffff (prio 1, ram): alias pam-pci @pc.ram 00000000000dc000-00000000000dffff [disabled]
00000000000dc000-00000000000dffff (prio 1, ram): alias pam-rom @pc.ram 00000000000dc000-00000000000dffff [disabled]
00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff
00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e0000-00000000000e3fff [disabled]
00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e0000-00000000000e3fff [disabled]
00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e0000-00000000000e3fff [disabled]
00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff
00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e4000-00000000000e7fff [disabled]
00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e4000-00000000000e7fff [disabled]
00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e4000-00000000000e7fff [disabled]
00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff
00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-ram @pc.ram 00000000000e8000-00000000000ebfff [disabled]
00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-pci @pc.ram 00000000000e8000-00000000000ebfff [disabled]
00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-rom @pc.ram 00000000000e8000-00000000000ebfff [disabled]
00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff
00000000000ec000-00000000000effff (prio 1, ram): alias pam-ram @pc.ram 00000000000ec000-00000000000effff [disabled]
00000000000ec000-00000000000effff (prio 1, ram): alias pam-pci @pc.ram 00000000000ec000-00000000000effff [disabled]
00000000000ec000-00000000000effff (prio 1, ram): alias pam-rom @pc.ram 00000000000ec000-00000000000effff [disabled]
00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff
00000000000f0000-00000000000fffff (prio 1, ram): alias pam-ram @pc.ram 00000000000f0000-00000000000fffff [disabled]
00000000000f0000-00000000000fffff (prio 1, ram): alias pam-pci @pc.ram 00000000000f0000-00000000000fffff [disabled]
00000000000f0000-00000000000fffff (prio 1, ram): alias pam-rom @pc.ram 00000000000f0000-00000000000fffff [disabled]
00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff
00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic
00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi
After:
(qemu) info mtree
memory-region: system
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff
00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff
00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff
00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff
00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff
00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff
00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff
00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff
00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff
00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff
00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff
00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff
00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic
00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi
The old behavior is preserved using 'info mtree -D'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update the header comments in .hx files that mention STEXI/ETEXI
markup; this is now SRST/ERST as all these files have been
converted to rST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
|
|
We no longer generate texinfo from the hxtool input files,
so delete all the STEXI/ETEXI blocks.
This commit was created using the following Perl one-liner:
perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add the rST versions of the documentation fragments. Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.
Note that most of the SRST fragments are 2-space indented so that the
'info foo' documentation entries appear as a sublist under the 'info'
entry in the top level list.
Again, all we need to do to put the documentation in the Sphinx manual
is a one-line hxtool-doc invocation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-22-peter.maydell@linaro.org
|
|
This adds 'info mem' command for RISC-V, to show virtual memory
mappings that aids debugging.
Rather than showing every valid PTE, the command compacts the
output by merging all contiguous physical address mappings into
one block and only shows the merged block mapping details.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Allow interrogating device internals through HMP interface.
The exposed indicators can be used for troubleshooting by developers or
sysadmin.
There is no need to expose these attributes to a management system (e.x.
libvirt) because (1) most of them are not "device-management' related
info and (2) there is no guarantee the interface is stable.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1552300155-25216-6-git-send-email-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
|
|
The command introduced here is just for developers. This means that:
- the info displayed and the output format could change in the future
- the command is only meant to be used from HMP, not from QMP
Sample output:
(qemu) sync-profile
sync-profile is off
(qemu) info sync-profile
Type Object Call site Wait Time (s) Count Average (us)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(qemu) sync-profile on
(qemu) sync-profile
sync-profile is on
(qemu) info sync-profile 15
Type Object Call site Wait Time (s) Count Average (us)
----------------------------------------------------------------------------------------------
condvar 0x55a01813ced0 cpus.c:1165 91.38235 2842 32154.24
BQL mutex 0x55a0171b7140 cpus.c:1434 12.56490 5787 2171.23
BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:432 7.75846 2844 2728.01
BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 5.09889 2884 1767.99
BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:529 3.46140 3254 1063.74
BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:804 0.76333 8655 88.20
BQL mutex 0x55a0171b7140 cpus.c:1466 0.60893 2941 207.05
BQL mutex 0x55a0171b7140 util/main-loop.c:236 0.00894 6425 1.39
mutex [ 3] util/qemu-timer.c:520 0.00342 50611 0.07
mutex [ 2] util/qemu-timer.c:426 0.00254 31336 0.08
mutex [ 3] util/qemu-timer.c:234 0.00107 19275 0.06
mutex 0x55a0171d9960 vl.c:763 0.00043 6425 0.07
mutex 0x55a0180d1bb0 monitor.c:458 0.00015 1603 0.09
mutex 0x55a0180e4c78 chardev/char.c:109 0.00002 217 0.08
mutex 0x55a0180d1bb0 monitor.c:448 0.00001 162 0.08
----------------------------------------------------------------------------------------------
(qemu) info sync-profile -m 15
Type Object Call site Wait Time (s) Count Average (us)
----------------------------------------------------------------------------------------------
condvar 0x55a01813ced0 cpus.c:1165 95.11196 3051 31174.03
BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:432 7.92108 3052 2595.37
BQL mutex 0x55a0171b7140 cpus.c:1434 13.38253 6210 2155.00
BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 5.09901 3093 1648.57
BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:529 4.21123 3468 1214.31
BQL mutex 0x55a0171b7140 cpus.c:1466 0.60895 3156 192.95
BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:804 0.76337 9282 82.24
BQL mutex 0x55a0171b7140 util/main-loop.c:236 0.00944 6889 1.37
mutex 0x55a01813ce80 tcg/tcg.c:397 0.00000 24 0.15
mutex 0x55a0180d1bb0 monitor.c:458 0.00018 1922 0.09
mutex [ 2] util/qemu-timer.c:426 0.00266 32710 0.08
mutex 0x55a0180e4c78 chardev/char.c:109 0.00002 260 0.08
mutex 0x55a0180d1bb0 monitor.c:448 0.00001 187 0.08
mutex 0x55a0171d9960 vl.c:763 0.00047 6889 0.07
mutex [ 3] util/qemu-timer.c:520 0.00362 53377 0.07
----------------------------------------------------------------------------------------------
(qemu) info sync-profile -m -n 15
Type Object Call site Wait Time (s) Count Average (us)
----------------------------------------------------------------------------------------------
condvar 0x55a01813ced0 cpus.c:1165 101.39331 3398 29839.12
BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:432 7.92112 3399 2330.43
BQL mutex 0x55a0171b7140 cpus.c:1434 14.28280 6922 2063.39
BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 5.77505 3445 1676.36
BQL mutex 0x55a0171b7140 accel/tcg/cpu-exec.c:529 5.66139 3883 1457.99
BQL mutex 0x55a0171b7140 cpus.c:1466 0.60901 3519 173.06
BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:804 0.76351 10338 73.85
BQL mutex 0x55a0171b7140 util/main-loop.c:236 0.01032 7664 1.35
mutex 0x55a0180e4f08 util/qemu-timer.c:426 0.00041 901 0.45
mutex 0x55a01813ce80 tcg/tcg.c:397 0.00000 24 0.15
mutex 0x55a0180d1bb0 monitor.c:458 0.00022 2319 0.09
mutex 0x55a0180e4c78 chardev/char.c:109 0.00003 306 0.08
mutex 0x55a0180e4f08 util/qemu-timer.c:520 0.00068 8565 0.08
mutex 0x55a0180d1bb0 monitor.c:448 0.00002 215 0.08
mutex 0x55a0180e4f78 util/qemu-timer.c:426 0.00247 34224 0.07
----------------------------------------------------------------------------------------------
(qemu) sync-profile reset
(qemu) info sync-profile -m 2
Type Object Call site Wait Time (s) Count Average (us)
--------------------------------------------------------------------------------------------
condvar 0x55a01813ced0 cpus.c:1165 2.78756 99 28157.12
BQL mutex 0x55a0171b7140 accel/tcg/cputlb.c:870 0.33054 102 3240.55
--------------------------------------------------------------------------------------------
(qemu) sync-profile off
(qemu) sync-profile
sync-profile is off
(qemu) sync-profile reset
(qemu) info sync-profile
Type Object Call site Wait Time (s) Count Average (us)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add #if defined(CONFIG_VNC) in generated code, and adjust the
qmp/hmp code accordingly.
query-qmp-schema no longer reports the command/events etc as
available when disabled at compile.
Commands made conditional:
* query-vnc, query-vnc-servers, change-vnc-password
Before the patch, the commands for !CONFIG_VNC are stubs that fail
like this:
{"error": {"class": "GenericError",
"desc": "The feature 'vnc' is not enabled"}}
Afterwards, they fail like this:
{"error": {"class": "CommandNotFound",
"desc": "The command FOO has not been found"}}
I call that an improvement, because it lets clients distinguish
between command unavailable (class CommandNotFound) and command failed
(class GenericError).
Events made conditional:
* VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED
HMP change:
* info vnc
Will return "unknown command: 'info vnc'" when VNC is compiled
out (same as error for spice when --disable-spice)
Occurrences of VNC (case insensitive) in the schema that aren't
covered by this change:
* add_client
Command has other uses, including "socket bases character devices".
These are unconditional as far as I can tell.
* set_password, expire_password
In theory, these commands could be used for managing any service's
password. In practice, they're used for VNC and SPICE services.
They're documented for "remote display session" / "remote display
server".
The service is selected by argument @protocol. The code special-cases
protocol-specific argument checking, then calls a protocol-specific
function to do the work. If it fails, the command fails with "Could
not set password". It does when the service isn't compiled in (it's a
stub then).
We could make these commands conditional on the conjunction of all
services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)],
but I doubt it's worthwhile.
* change
Command has other uses, namely changing media.
This patch inlines a stub; no functional change.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Something that commit 254316fa1f ("intc: make HMP 'info irq' and 'info
pic' commands available on all targets", 2016-10-04) forgot to touch up.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This adds owners/parents (which are the same, just occasionally
owner==NULL) printing for memory regions; a new '-o' flag
enabled new output.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180604032511.6980-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allow a bunch of the info commands to be used in preconfig.
version, chardev, name, uuid,memdev, iothreads
Were enabled in QMP in the previous patch from Igor
status, hotpluggable_cpus
Was enabled in the original allow-preconfig series
history
is HMP specific
qom-tree
Don't have a QMP equivalent
Also enable the qom commands qom-list and qom-set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180620153947.30834-6-dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dropped info numa as per Igor's 2018-06-21 review
|
|
The command can be used to show the SEV information when memory
encryption is enabled on AMD platform.
Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Dump MMU state and address mappings.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-8-laurent@vivier.eu>
|
|
qemu-doc has the monitor commands in the "Function Index". The "info
FOO" are listed as "FOO" there. List them as "info FOO" instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
A command's STEXI..ETEXI stanza follows the command's initializer.
Two commands got them backwards. Correct that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Screwed up in commit da76ee7.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
This adds a new "-d" switch to "info mtree" to print dispatch tree
internals.
This changes the way "-f" is handled - it prints now flat views and
associated address spaces.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-15-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add 'info memory_size_summary' command which is a sibling
of QMP command query-memory-size-summary. It provides the
following memory information in bytes:
* base-memory - size of "base" memory specified with command line option -m.
* plugged-memory - amount of memory that was hot-plugged.
If target does not have CONFIG_MEM_HOTPLUG enabled, no
value is reported.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-4-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up comments from Igor's review
|
|
Add [apic-id] support for hmp command "info lapic", which is
useful when debugging ipi and so on. Current behavior is not
changed when the parameter isn't specified.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Yun Liu <liu.yunh@zte.com.cn>
Message-Id: <1501049917-4701-3-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Add an "info" monitor command to non-destructively inspect the state of
the storage attributes of the guest, and a normal command to toggle
migration mode (useful for debugging).
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The info registers command in the qemu monitor is used to dump register
values.
Currently this command uses the monitor cpu (which can be set by the
user) as the cpu for whose registers will be dumped. Sometimes it is
useful to see the registers for all cpus and currently this requires
setting the monitor cpu and the re-running the command for each cpu
in the system. I would be nice if there was an easier way to do this.
Add the "-a" option to the info registers command to dump the register
values for all cpus.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20170608054116.17203-1-sjitindarsingh@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
To dump information about ramblocks. It looks like:
(qemu) info ramblock
Block Name PSize Offset Used Total
/objects/mem 2 MiB 0x0000000000000000 0x0000000080000000 0x0000000080000000
vga.vram 4 KiB 0x0000000080060000 0x0000000001000000 0x0000000001000000
/rom@etc/acpi/tables 4 KiB 0x00000000810b0000 0x0000000000020000 0x0000000000200000
pc.bios 4 KiB 0x0000000080000000 0x0000000000040000 0x0000000000040000
0000:00:03.0/e1000.rom 4 KiB 0x0000000081070000 0x0000000000040000 0x0000000000040000
pc.rom 4 KiB 0x0000000080040000 0x0000000000020000 0x0000000000020000
0000:00:02.0/vga.rom 4 KiB 0x0000000081060000 0x0000000000010000 0x0000000000010000
/rom@etc/table-loader 4 KiB 0x00000000812b0000 0x0000000000001000 0x0000000000001000
/rom@etc/acpi/rsdp 4 KiB 0x00000000812b1000 0x0000000000001000 0x0000000000001000
Ramblock is something hidden internally in QEMU implementation, and this
command should only be used by mostly QEMU developers on RAM stuff. It
is not a command suitable for QMP interface. So only HMP interface is
provided for it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Add commands to query Virtual Machine Generation ID counter.
QMP command example:
{ "execute": "query-vm-generation-id" }
HMP command example:
info vm-generation-id
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Adding one more option "-f" for "info mtree" to dump the flat views of
all the address spaces.
This will be useful to debug the memory rendering logic, also it'll be
much easier with it to know what memory region is handling what address
range.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-7-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
interface
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-6-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is no longer necessary now that we aren't using middle mode
anymore.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Homogenizes the command capabilities with QMP.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This is the HMP equivalent for QMP query-hotpluggable-cpus.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Fixed problem with printf formats on 32-bit host]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
It will calculate percentage of finished work from completed and
total.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1455772616-8668-11-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
