Age | Commit message (Collapse) | Author |
|
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
|
|
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.
In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.
As the changes are simple renames, I'll do them in one shot. The
changes are:
- Rename the prefix from RSTATE_ to RUN_STATE_
- RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
- RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
- RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
- RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
- RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
- RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
- RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
- RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Use runstate_is_running() instead, which is introduced by this commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Gdb expects all registers windows to be flushed in ram, which is not the case
in Qemu. Therefore the back-trace generation doesn't work. This patch adds a
function to handle reads (and only read) in stack frames as if windows were
flushed.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Specific xtensa processor overlay for GDB contains register map in
the gdb/xtensa-config.c. This description is used by the GDB to e.g.
parse 'g' response packets and it may be reused in the qemu's gdbstub
(only XTREG definitions for non-pseudoregisters are needed).
Currently mainline GDB does not support operations with privileged SRs
(see http://sourceware.org/ml/gdb/2011-07/msg00075.html). This support
may be enabled, see NUM_CORE_REGS comment in the gdbstub.c
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Most exec-all.h include directives are now useless, remove them.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
target-mips has been switched to softfloat only long ago, but
a #ifndef CONFIG_SOFTFLOAT has been forgotten. Remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
We have successfully lazilized cc computation, so we need to manually
trigger its calculation when gdb wants to fetch it. We also changed the
variable name, so writing it writes into a different field now.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When the VM goes into stop state while there is a gdb frontend attached,
it makes sense to inform gdb about this fact and at least a bit about
the stop reason. Basically, all stops are interesting except for the
temporary VMSTOP_SAVE/LOADVM.
The patch maps the relevant VMSTOP reasons on unique and more or less
associatable signals that gdb understands.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
This patch adds lm32 support to the gdbstub.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
On Windows, this is required to flush the remaining data in the IO stream,
otherwise Gdb do not receive the last packet.
Version 2:
Fix linux-user build error.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
|
|
If the compiler supports the warning flag -Wnested-externs, use it.
Avoid the only warning by moving the declaration of xml_builtin to a
more proper place.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Report exit status to GDB when a semihosted application exits.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier
flags could be stored to pstate.
Refactor PSR/CCR/CWP handling: concentrate the actual
functions to op_helper.c.
Thanks to Igor Kovalenko for reporting.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
cpu_gdb_read_register(): Fix n={8...15} case.
cpu_gdb_write_register(): Fix n={8...15} case and runaway "case:".
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
With this patch, 'gdb detach' correctly resumes the inferior execution
after detaching the debugger.
The bug was caused by qemu asking gdb to execute a syscall (isatty)
after the detach, and then waiting (forever) for the reply. I fixed this
by properly setting gdb_syscall_mode appropriately in the 'detach'
packet handling, so subsequent syscalls are solved by qemu rather than gdb.
Signed-off-by: Daniel Gutson <dgutson@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
cpu_gdb_read/write_register need to access the fpcr via the
cpu_alpha_load/store_fpcr functions.
The unique register is number 66 in the gdb remote protocol.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Attached is a patch to fix a typo in 'P' packet processing for M68K.
Without this patch, QEMU fails to honor GDB's P packets from GDB
(writing to registers) for the address registers (A0 - A7).
The problem is because of an obvious typo. Notice that the second
"if" condition is meant to be n < 16 in:
if (n < 8) {
:
} else if (n < 8) {
Signed-off-by: Kazu Hirata <kazu@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
The only thing to do here is to expose the current processor mode to GDB
and to set the processor mode properly when we change the PC.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
In order to debug funny kernel breakages it's always good to have a working
gdb stub around.
While Uli's patches don't include one one, I needed one that's at least good
enough for 'bt' and some variable examinations during early bootup.
So here it is - the absolute basics to get the qemu gdb stub running with s390x
targets.
Sgined-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file
descriptors that don't need to be passed to children to stop this misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The char event RESET is emitted when a char device is opened.
Give it a better name.
Patchworks-ID: 35287
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Commit 56aebc891674cd2d07b3f64183415697be200084 changed gdbstub in way
that debugging 32 or 16-bit guest code is no longer possible with qemu
for x86_64 guest CPUs. Since that commit, qemu only provides registers
sets for 64-bit, forcing current and foreseeable gdb to also switch its
architecture to 64-bit. And this breaks if the inferior is 32 or 16 bit.
No question, this is a gdb issue. But, as it was confirmed in several
discusssions with gdb people, it is a non-trivial thing to fix. So until
qemu finds a gdb version attach with a rework x86 support, we have to
work around it by switching the register layout as the guest switches
its execution mode between 16/32 and 64 bit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Put space between = and * when dereferencing a pointer,
to avoid confusion with old-style "*="
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
cpu_synchronize_state() is a little unreadable since the 'modified'
argument isn't self-explanatory. Simplify it by making it always
synchronize the kernel state into qemu, and automatically flush the
registers back to the kernel if they've been synchronized on this
exit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This allows to set segment registers via gdb also in system emulation
mode. Basic sanity checks are applied and nothing is changed if they
fail. But screwing up the target via this interface will never be
complicated, so I avoided being too paranoid here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Clarify gdb's register set layout by using constants for
cpu_gdb_read/write_register.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds support for the vCont remote gdb command. It is used by
gdb 6.8 or better to switch the debugging focus for single-stepping
multi-threaded targets, ie. multi-threaded application in user mode
emulation or VCPUs in system emulation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When debugging multi-threaded programs, QEMU's gdb stub would report the
correct number of threads (the qfThreadInfo and qsThreadInfo packets).
However, the stub was unable to actually switch between threads (the T
packet), since it would report every thread except the first as being
dead. Furthermore, the stub relied upon cpu_index as a reliable means
of assigning IDs to the threads. This was a bad idea; if you have this
sequence of events:
initial thread created
new thread #1
new thread #2
thread #1 exits
new thread #3
thread #3 will have the same cpu_index as thread #1, which would confuse
GDB. (This problem is partly due to the remote protocol not having a
good way to send thread creation/destruction events.)
We fix this by using the host thread ID for the identifier passed to GDB
when debugging a multi-threaded userspace program. The thread ID might
wrap, but the same sort of problems with wrapping thread IDs would come
up with debugging programs natively, so this doesn't represent a
problem.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7175 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7099 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
The code for handling the c and s packets both contain code for setting
the pc. Move that code out to a common function.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7039 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Introduce a more canonical gdbstub configuration (system emulation only)
via the new switch '-gdb dev'. Keep '-s' as shorthand for
'-gdb tcp::1234'. Use the same syntax also for the corresponding monitor
command 'gdbserver'. Its default remains to listen on TCP port 1234.
Changes in v4:
- Rebased over new command line switches meta file
Changes in v3:
- Fix documentation
Changes in v2:
- Support for pipe-based like to gdb (target remote | qemu -gdb stdio)
- Properly update the qemu-doc
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6992 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
[ Note: depends on char closing fixes ]
Properly clean up the gdbstub when the user tries to re-open it
(possibly under a different address). Moreover, allow to shut it down
from the monitor via 'gdbserver none'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6913 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6897 c046a42c-6fe2-441c-8c8c-71466251a162
|