aboutsummaryrefslogtreecommitdiff
path: root/gdbstub.c
AgeCommit message (Collapse)Author
2022-10-06gdbstub: move into its own sub directoryAlex Bennée
This is in preparation of future refactoring as well as cleaning up the source tree. Aside from the minor tweaks to meson and trace.h this is pure code motion. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220929114231.583801-43-alex.bennee@linaro.org>
2022-06-28gdbstub: Adjust gdb_syscall_complete_cb declarationRichard Henderson
Change 'ret' to uint64_t. This resolves a FIXME in the m68k and nios2 semihosting that we've lost data. Change 'err' to int. There is nothing target-specific about the width of the errno value. Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-28gdbstub: Convert GDB error numbers to host error numbersRichard Henderson
Provide the callback with consistent state -- always use host error numbers. The individual callback can then decide if the errno requires conversion for the guest. Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-10gdbstub: Don't use GDB syscalls if no GDB is attachedPeter Maydell
In two places in gdbstub.c we look at gdbserver_state.init to decide whether we're going to do a semihosting syscall via the gdb remote protocol: * when setting up, if the user didn't explicitly select either native semihosting or gdb semihosting, we autoselect, with the intended behaviour "use gdb if gdb is connected" * when the semihosting layer attempts to do a syscall via gdb, we silently ignore it if the gdbstub wasn't actually set up However, if the user's commandline sets up the gdbstub but tells QEMU to start rather than waiting for a GDB to connect (eg using '-s' but not '-S'), then we will have gdbserver_state.init true but no actual connection; an attempt to use gdb syscalls will then crash because we try to use gdbserver_state.c_cpu when it hasn't been set up: #0 0x00007ffff6803ba8 in qemu_cpu_kick (cpu=0x0) at ../../softmmu/cpus.c:457 #1 0x00007ffff6c03913 in gdb_do_syscallv (cb=0x7ffff6c19944 <common_semi_cb>, fmt=0x7ffff7573b7e "", va=0x7ffff56294c0) at ../../gdbstub.c:2946 #2 0x00007ffff6c19c3a in common_semi_gdb_syscall (cs=0x7ffff83fe060, cb=0x7ffff6c19944 <common_semi_cb>, fmt=0x7ffff7573b75 "isatty,%x") at ../../semihosting/arm-compat-semi.c:494 #3 0x00007ffff6c1a064 in gdb_isattyfn (cs=0x7ffff83fe060, gf=0x7ffff86a3690) at ../../semihosting/arm-compat-semi.c:636 #4 0x00007ffff6c1b20f in do_common_semihosting (cs=0x7ffff83fe060) at ../../semihosting/arm-compat-semi.c:967 #5 0x00007ffff693a037 in handle_semihosting (cs=0x7ffff83fe060) at ../../target/arm/helper.c:10316 You can probably also get into this state via some odd corner cases involving connecting a GDB and then telling it to detach from all the vCPUs. Abstract out the test into a new gdb_attached() function which returns true only if there's actually a GDB connected to the debug stub and attached to at least one vCPU. Reported-by: Liviu Ionescu <ilg@livius.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220526190053.521505-2-peter.maydell@linaro.org
2022-04-06whpx: Added support for breakpoints and steppingIvan Shcherbakov
Below is the updated version of the patch adding debugging support to WHPX. It incorporates feedback from Alex Bennée and Peter Maydell regarding not changing the emulation logic depending on the gdb connection status. Instead of checking for an active gdb connection to determine whether QEMU should intercept the INT1 exceptions, it now checks whether any breakpoints have been set, or whether gdb has explicitly requested one or more CPUs to do single-stepping. Having none of these condition present now has the same effect as not using gdb at all. Message-Id: <0e7f01d82e9e$00e9c360$02bd4a20$@sysprogs.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-22Drop qemu_foo() socket API wrapperMarc-André Lureau
The socket API wrappers were initially introduced in commit 00aa0040 ("Wrap recv to avoid warnings"), but made redundant with commit a2d96af4 ("osdep: add wrappers for socket functions") which fixes the win32 declarations and thus removed the earlier warnings. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-12-10gdbstub, kvm: let KVM report supported singlestep flagsMaxim Levitsky
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> [Extracted from Maxim's patch into a separate commit. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20211111110604.207376-5-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-10gdbstub: reject unsupported flags in handle_set_qemu_sstepMaxim Levitsky
handle_query_qemu_sstepbits is reporting NOIRQ and NOTIMER bits even if they are not supported (as is the case with record/replay). Instead, store the supported singlestep flags and reject any unsupported bits in handle_set_qemu_sstep. This removes the need for the get_sstep_flags() wrapper. While at it, move the variables in GDBState, instead of using global variables. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> [Extracted from Maxim's patch into a separate commit. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20211111110604.207376-4-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-29gdbstub: handle a potentially racing TaskStateAlex Bennée
When dealing with multi-threaded userspace programs there is a race condition with the addition of cpu->opaque (aka TaskState). This is due to cpu_copy calling cpu_create which updates the global vCPU list. However the task state isn't set until later. This shouldn't be a problem because the new thread can't have executed anything yet but the gdbstub code does liberally iterate through the CPU list in various places. This sticking plaster ensure the not yet fully realized vCPU is given an pid of -1 which should be enough to ensure it doesn't show up anywhere else. In the longer term I think the code that manages the association between vCPUs and attached GDB processes could do with a clean-up and re-factor. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Henderson <richard.henderson@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/730 Message-Id: <20211129140932.4115115-6-alex.bennee@linaro.org>
2021-11-04gdbstub: Switch to the thread receiving a signalPavel Labath
Respond with Txxthread:yyyy; instead of a plain Sxx to indicate which thread received the signal. Otherwise, the debugger will associate it with the main one. Also automatically select this thread, as that is what gdb expects. Signed-off-by: Pavel Labath <pavel@labath.sk> Message-Id: <20211019174953.36560-1-pavel@labath.sk> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211026102234.3961636-29-alex.bennee@linaro.org>
2021-09-13linux-user: Don't include gdbstub.h in qemu.hPeter Maydell
Currently the linux-user qemu.h pulls in gdbstub.h. There's no real reason why it should do this; include it directly from the C files which require it, and drop the include line in qemu.h. (Note that several of the C files previously relying on this indirect include were going out of their way to only include gdbstub.h conditionally on not CONFIG_USER_ONLY!) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-9-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-08-26gdbstub: Zero-initialize sockaddr structsPeter Maydell
Zero-initialize sockaddr_in and sockaddr_un structs that we're about to fill in and pass to bind() or connect(), to ensure we don't leave possible implementation-defined extension fields as uninitialized garbage. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20210813150506.7768-3-peter.maydell@linaro.org
2021-05-25gdbstub: tidy away reverse debugging check into functionAlex Bennée
In theory we don't need an actual record/replay to enact reverse debugging on a purely deterministic system (i.e one with no external inputs running under icount). Tidy away the logic into a little function. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210520174303.12310-8-alex.bennee@linaro.org>
2021-05-25gdbstub: Replace GdbCmdContext with plain g_array()Alex Bennée
Instead of jumping through hoops let glib deal with both tracking the number of elements and auto freeing the memory once we are done. This allows is to drop the usage of ALLOCA(3) which the man-page mentions its "use is discouraged". Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210520174303.12310-6-alex.bennee@linaro.org>
2021-05-25gdbstub: Constify GdbCmdParseEntryPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210505170055.1415360-3-philmd@redhat.com> Message-Id: <20210520174303.12310-5-alex.bennee@linaro.org>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-11Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé
We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
2021-03-09sysemu: Let VMChangeStateHandler take boolean 'running' argumentPhilippe Mathieu-Daudé
The 'running' argument from VMChangeStateHandler does not require other value than 0 / 1. Make it a plain boolean. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210111152020.1422021-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-06chardev: add nodelay optionPaolo Bonzini
The "delay" option was introduced as a way to enable Nagle's algorithm with ",nodelay". Since the short form for boolean options has now been deprecated, introduce a more properly named "nodelay" option. The "delay" option remains as an undocumented option. "delay" and "nodelay" are mutually exclusive. Because the check is done at consumption time, the code also rejects them if one of the two is specified via -set. Based-on: <20210226080526.651705-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-25gdbstub: use preferred boolean option syntaxDaniel P. Berrangé
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210216191027.595031-2-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08gdbstub: Fix handle_query_xfer_auxvRichard Henderson
The main problem was that we were treating a guest address as a host address with a mere cast. Use the correct interface for accessing guest memory. Do not allow offset == auxv_len, which would result in an empty packet. Fixes: 51c623b0de1 ("gdbstub: add support to Xfer:auxv:read: packet") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210128201831.534033-1-richard.henderson@linaro.org> Message-Id: <20210202134001.25738-11-alex.bennee@linaro.org>
2021-01-18gdbstub: ensure we clean-up when terminatedAlex Bennée
If you kill the inferior from GDB we end up leaving our socket lying around. Fix this by calling gdb_exit() first. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210108224256.2321-10-alex.bennee@linaro.org>
2021-01-18gdbstub: drop gdbserver_cleanup in favour of gdb_exitAlex Bennée
Despite it's name it didn't actually clean-up so let us document gdb_exit() better and use that. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210108224256.2321-9-alex.bennee@linaro.org>
2021-01-18gdbstub: drop CPUEnv from gdb_exit()Alex Bennée
gdb_exit() has never needed anything from env and I doubt we are going to start now. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210108224256.2321-8-alex.bennee@linaro.org>
2021-01-18gdbstub: add support to Xfer:auxv:read: packetLirong Yuan
This allows gdb to access the target’s auxiliary vector, which can be helpful for telling system libraries important details about the hardware, operating system, and process. Signed-off-by: Lirong Yuan <yuanzi@google.com> [AJB: minor tweaks to test case, update MAINTAINERS, restrict to Linux] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200730193932.3654677-1-yuanzi@google.com> Message-Id: <20210108224256.2321-7-alex.bennee@linaro.org>
2020-12-15gdbstub: Correct misparsing of vCont C/S requestsPeter Maydell
In the vCont packet, two of the command actions (C and S) take an argument specifying the signal to be sent to the process/thread, which is sent as an ASCII string of two hex digits which immediately follow the 'C' or 'S' character. Our code for parsing this packet accidentally skipped the first of the two bytes of the signal value, because it started parsing the hex string at 'p + 1' when the preceding code had already moved past the 'C' or 'S' with "cur_action = *p++". This meant that we would only do the right thing for signals below 10, and would misinterpret the rest. For instance, when the debugger wants to send the process a SIGPROF (27 on x86-64) we mangle this into a SIGSEGV (11). Remove the accidental double increment. Fixes: https://bugs.launchpad.net/qemu/+bug/1773743 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20201121210342.10089-1-peter.maydell@linaro.org
2020-10-06replay: create temporary snapshot at debugger connectionPavel Dovgalyuk
When record/replay does not uses overlays for storing the snapshots, user is not capable of issuing reverse debugging commands. This patch adds creation of the VM snapshot on the temporary overlay image, when the debugger connects to QEMU. Therefore the execution can be rewind to the moment of the debugger connection while debugging the virtual machine. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> -- v6: - dropped unused error processing (suggested by Philippe Mathieu-Daudé) Message-Id: <160174524096.12451.11651270339216758643.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06gdbstub: add reverse continue support in replay modePavel Dovgalyuk
This patch adds support of the reverse continue operation for gdbstub. Reverse continue finds the last breakpoint that would happen in normal execution from the beginning to the current moment. Implementation of the reverse continue replays the execution twice: to find the breakpoints that were hit and to seek to the last breakpoint. Reverse continue loads the previous snapshot and tries to find the breakpoint since that moment. If there are no such breakpoints, it proceeds to the earlier snapshot, and so on. When no breakpoints or watchpoints were hit at all, execution stops at the beginning of the replay log. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <160174522930.12451.6994758004725016836.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06gdbstub: add reverse step support in replay modePavel Dovgalyuk
GDB remote protocol supports two reverse debugging commands: reverse step and reverse continue. This patch adds support of the first one to the gdbstub. Reverse step is intended to step one instruction in the backwards direction. This is not possible in regular execution. But replayed execution is deterministic, therefore we can load one of the prior snapshots and proceed to the desired step. It is equivalent to stepping one instruction back. There should be at least one snapshot preceding the debugged part of the replay log. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> -- v4 changes: - inverted condition in cpu_handle_guest_debug (suggested by Alex Bennée) Message-Id: <160174522341.12451.1498758422543765253.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-21qom: Change object_get_canonical_path_component() not to mallocMarkus Armbruster
object_get_canonical_path_component() returns a malloced copy of a property name on success, null on failure. 19 of its 25 callers immediately free the returned copy. Change object_get_canonical_path_component() to return the property name directly. Since modifying the name would be wrong, adjust the return type to const char *. Drop the free from the 19 callers become simpler, add the g_strdup() to the other six. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200714160202.3121879-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com>
2020-05-06gdbstub/linux-user: support debugging over a unix socketAlex Bennée
While debugging over TCP is fairly straightforward now we have test cases that want to orchestrate via make and currently a parallel build fails as two processes can't use the same listening port. While system emulation offers a wide cornucopia of connection methods thanks to the chardev abstraction we are a little more limited for linux user. Thankfully the programming API for a TCP socket and a local UNIX socket is pretty much the same once it's set up. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200430190122.4592-7-alex.bennee@linaro.org>
2020-05-06gdbstub: eliminate gdbserver_fd globalAlex Bennée
We don't really need to track this fd beyond the initial creation of the socket. We already know if the system has been initialised by virtue of the gdbserver_state so lets remove it. This makes the later re-factoring easier. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200430190122.4592-6-alex.bennee@linaro.org>
2020-04-07gdbstub: fix compiler complainingDenis Plotnikov
./gdbstub.c: In function ‘handle_query_thread_extra’: /usr/include/glib-2.0/glib/glib-autocleanups.h:28:10: error: ‘cpu_name’ may be used uninitialized in this function [-Werror=maybe-uninitialized] g_free (*pp); ^ ./gdbstub.c:2063:26: note: ‘cpu_name’ was declared here g_autofree char *cpu_name; ^ cc1: all warnings being treated as errors Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Message-Id: <20200326151407.25046-1-dplotnikov@virtuozzo.com> Reported-by: Euler Robot <euler.robot@huawei.com> Reported-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com> Message-Id: <20200325092137.24020-1-kuhn.chenqun@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200403191150.863-7-alex.bennee@linaro.org>
2020-03-17gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdbChangbin Du
Recently when debugging an arm32 system on qemu, I found sometimes the single-step command (stepi) is not working. This can be reproduced by below steps: 1) start qemu-system-arm -s -S .. and wait for gdb connection. 2) start gdb and connect to qemu. In my case, gdb gets a wrong value (0x60) for PC, which is an another bug. 3) After connected, type 'stepi' and expect it will stop at next ins. But, it has never stopped. This because: 1) We doesn't report ‘vContSupported’ feature to gdb explicitly and gdb think we do not support it. In this case, gdb use a software breakpoint to emulate single-step. 2) Since gdb gets a wrong initial value of PC, then gdb inserts a breakpoint to wrong place (PC+4). Not only for the arm target, Philippe has also encountered this on MIPS. Probably gdb has different assumption for different architectures. Since we do support ‘vContSupported’ query command, so let's tell gdb that we support it. Before this change, gdb send below 'Z0' packet to implement single-step: gdb_handle_packet: Z0,4,4 After this change, gdb send "vCont;s.." which is expected: gdb_handle_packet: vCont? put_packet: vCont;c;C;s;S gdb_handle_packet: vCont;s:p1.1;c:p1.-1 Signed-off-by: Changbin Du <changbin.du@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200221002559.6768-1-changbin.du@gmail.com> [AJB: fix for static gdbstub] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200316172155.971-29-alex.bennee@linaro.org>
2020-03-17gdbstub: do not split gdb_monitor_write payloadDamien Hedde
Since we can now send packets of arbitrary length: simplify gdb_monitor_write() and send the whole payload in one packet. Suggested-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20191211160514.58373-3-damien.hedde@greensocs.com> Message-Id: <20200316172155.971-28-alex.bennee@linaro.org>
2020-03-17gdbstub: change GDBState.last_packet to GByteArrayDamien Hedde
Remove the packet size upper limit by using a GByteArray instead of a statically allocated array for last_packet. Thus we can now send big packets. Also remove the last_packet_len field and use last_packet->len instead. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191211160514.58373-2-damien.hedde@greensocs.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200316172155.971-27-alex.bennee@linaro.org>
2020-03-17gdbstub: extend GByteArray to read register helpersAlex Bennée
Instead of passing a pointer to memory now just extend the GByteArray to all the read register helpers. They can then safely append their data through the normal way. We don't bother with this abstraction for write registers as we have already ensured the buffer being copied from is the correct size. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
2020-03-17gdbstub: move mem_buf to GDBState and use GByteArrayAlex Bennée
This is in preparation for further re-factoring of the register API with the rest of the code. Theoretically the read register function could overwrite the MAX_PACKET_LENGTH buffer although currently all registers are well within the size range. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Tested-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-10-alex.bennee@linaro.org>
2020-03-17gdbstub: move str_buf to GDBState and use GStringAlex Bennée
Rather than having a static buffer replace str_buf with a GString which we know can grow on demand. Convert the internal functions to take a GString instead of a char * and length. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Tested-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-9-alex.bennee@linaro.org>
2020-03-17gdbstub: stop passing GDBState * around and use globalAlex Bennée
We only have one GDBState which should be allocated at the time we process any commands. This will make further clean-up a bit easier. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200316172155.971-8-alex.bennee@linaro.org>
2020-03-17gdbstub: make GDBState static and have common init functionAlex Bennée
Instead of allocating make this entirely static. We shall reduce the size of the structure in later commits and dynamically allocate parts of it. We introduce an init and reset helper function to keep all the manipulation in one place. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316172155.971-7-alex.bennee@linaro.org>
2020-03-06hmp: Fail gracefully if chardev is already in useKevin Wolf
Trying to attach a HMP monitor to a chardev that is already in use results in a crash because monitor_init_hmp() passes &error_abort to qemu_chr_fe_init(): $ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo --mon foo QEMU 4.2.50 monitor - type 'help' for more information (qemu) Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220: qemu-system-x86_64: --mon foo: Device 'foo' is in use Abgebrochen (Speicherabzug geschrieben) Fix this by allowing monitor_init_hmp() to return an error and passing any error in qemu_chr_fe_init() to its caller instead of aborting. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-19-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-01-08chardev: Use QEMUChrEvent enum in IOEventHandler typedefPhilippe Mathieu-Daudé
The Chardev events are listed in the QEMUChrEvent enum. By using the enum in the IOEventHandler typedef we: - make the IOEventHandler type more explicit (this handler process out-of-band information, while the IOReadHandler is in-band), - help static code analyzers. This patch was produced with the following spatch script: @match@ expression backend, opaque, context, set_open; identifier fd_can_read, fd_read, fd_event, be_change; @@ qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event, be_change, opaque, context, set_open); @depends on match@ identifier opaque, event; identifier match.fd_event; @@ static -void fd_event(void *opaque, int event) +void fd_event(void *opaque, QEMUChrEvent event) { ... } Then the typedef was modified manually in include/chardev/char-fe.h. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20191218172009.8868-15-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-28gdbstub: Fix handler for 'F' packetSandra Loosemore
Handling of the 'F' packet has been broken since commit 4b20fab101b9e2d0fb47454209637a17fc7a13d5, which converted it to use the new packet parsing infrastructure. Per the GDB RSP specification https://sourceware.org/gdb/current/onlinedocs/gdb/The-F-Reply-Packet.html the second parameter may be omitted, but the rewritten implementation was failing to recognize this case. The result was that QEMU was repeatedly resending the fileio request and ignoring GDB's replies of successful completion. This patch restores the behavior of the previous code in allowing the errno parameter to be omitted and passing 0 to the callback in that case. Signed-off-by: Sandra Loosemore <sandra@codesourcery.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190827223317.8614-1-sandra@codesourcery.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-28gdbstub: Fix handling of '!' packet with new infraRamiro Polla
Since the '!' packet is not handled by the new infrastructure, gdb_handle_packet() would call run_cmd_parser() with a NULL cmd_parser value, which would lead to an unsupported packet ("$#00") being sent, which could confuse the gdb client. This also has a side-effect of speeding up the initial connection with gdb. Fixes: 3e2c12615b52 ("gdbstub: Implement deatch (D pkt) with new infra") Signed-off-by: Ramiro Polla <ramiro.polla@gmail.com> Message-Id: <20190805190901.14072-1-ramiro.polla@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-07-10gdbstub: revert to previous set_reg behaviourAlex Bennée
The refactoring of handle_set_reg missed the fact we previously had responded with an empty packet when we were not using XML based protocols. This broke the fallback behaviour for architectures that don't have registers defined in QEMU's gdb-xml directory. Revert to the previous behaviour and clean up the commentary for what is going on. Fixes: 62b3320bddd Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Jon Doron <arilou@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 19:02:08 +0000