aboutsummaryrefslogtreecommitdiff
path: root/gdbstub.c
AgeCommit message (Collapse)Author
2010-05-09sparc: Fix lazy flag calculation on interrupts, refactorBlue Swirl
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier flags could be stored to pstate. Refactor PSR/CCR/CWP handling: concentrate the actual functions to op_helper.c. Thanks to Igor Kovalenko for reporting. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-27target-sh4: Fix gdb read/write registertakasi-y@ops.dti.ne.jp
cpu_gdb_read_register(): Fix n={8...15} case. cpu_gdb_write_register(): Fix n={8...15} case and runaway "case:". Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-27Fix to 'gdb detach' stubDaniel Gutson
With this patch, 'gdb detach' correctly resumes the inferior execution after detaching the debugger. The bug was caused by qemu asking gdb to execute a syscall (isatty) after the detach, and then waiting (forever) for the reply. I fixed this by properly setting gdb_syscall_mode appropriately in the 'detach' packet handling, so subsequent syscalls are solved by qemu rather than gdb. Signed-off-by: Daniel Gutson <dgutson@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-23target-alpha: Fix gdb access to fpcr and unique.Richard Henderson
cpu_gdb_read/write_register need to access the fpcr via the cpu_alpha_load/store_fpcr functions. The unique register is number 66 in the gdb remote protocol. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-20cris: Add CRISv10 gdbstub support.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-01-14target-m68k: fix a typo in 'P' packet processingKazu Hirata
Attached is a patch to fix a typo in 'P' packet processing for M68K. Without this patch, QEMU fails to honor GDB's P packets from GDB (writing to registers) for the address registers (A0 - A7). The problem is because of an obvious typo. Notice that the second "if" condition is meant to be n < 16 in: if (n < 8) { : } else if (n < 8) { Signed-off-by: Kazu Hirata <kazu@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13gdbstub: add MIPS16 supportNathan Froyd
The only thing to do here is to expose the current processor mode to GDB and to set the processor mode properly when we change the PC. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05S390 GDB stubAlexander Graf
In order to debug funny kernel breakages it's always good to have a working gdb stub around. While Uli's patches don't include one one, I needed one that's at least good enough for 'bt' and some variable examinations during early bootup. So here it is - the absolute basics to get the qemu gdb stub running with s390x targets. Sgined-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-03Don't leak file descriptorsKevin Wolf
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file descriptors that don't need to be passed to children to stop this misbehaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-21char: rename CHR_EVENT_RESET to CHR_EVENT_OPENEDAmit Shah
The char event RESET is emitted when a char device is opened. Give it a better name. Patchworks-ID: 35287 Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05gdbstub: x86: Switch 64/32 bit registers dynamicallyJan Kiszka
Commit 56aebc891674cd2d07b3f64183415697be200084 changed gdbstub in way that debugging 32 or 16-bit guest code is no longer possible with qemu for x86_64 guest CPUs. Since that commit, qemu only provides registers sets for 64-bit, forcing current and foreseeable gdb to also switch its architecture to 64-bit. And this breaks if the inferior is 32 or 16 bit. No question, this is a gdb issue. But, as it was confirmed in several discusssions with gdb people, it is a non-trivial thing to fix. So until qemu finds a gdb version attach with a rework x86 support, we have to work around it by switching the register layout as the guest switches its execution mode between 16/32 and 64 bit. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-30gdbstub: fix coding style nitMichael S. Tsirkin
Put space between = and * when dereferencing a pointer, to avoid confusion with old-style "*=" Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-27kvm: Simplify cpu_synchronize_state()Avi Kivity
cpu_synchronize_state() is a little unreadable since the 'modified' argument isn't self-explanatory. Simplify it by making it always synchronize the kernel state into qemu, and automatically flush the registers back to the kernel if they've been synchronized on this exit. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27rename USE_NPTL to CONFIG_USE_NPTLJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16gdbstub: x86: Support for setting segment registersJan Kiszka
This allows to set segment registers via gdb also in system emulation mode. Basic sanity checks are applied and nothing is changed if they fail. But screwing up the target via this interface will never be complicated, so I avoided being too paranoid here. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16gdbstub: x86: Refactor register accessJan Kiszka
Clarify gdb's register set layout by using constants for cpu_gdb_read/write_register. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16gdbstub: Add vCont supportJan Kiszka
This patch adds support for the vCont remote gdb command. It is used by gdb 6.8 or better to switch the debugging focus for single-stepping multi-threaded targets, ie. multi-threaded application in user mode emulation or VCPUs in system emulation. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-04fix gdbstub support for multiple threads in usermode, v3Nathan Froyd
When debugging multi-threaded programs, QEMU's gdb stub would report the correct number of threads (the qfThreadInfo and qsThreadInfo packets). However, the stub was unable to actually switch between threads (the T packet), since it would report every thread except the first as being dead. Furthermore, the stub relied upon cpu_index as a reliable means of assigning IDs to the threads. This was a bad idea; if you have this sequence of events: initial thread created new thread #1 new thread #2 thread #1 exits new thread #3 thread #3 will have the same cpu_index as thread #1, which would confuse GDB. (This problem is partly due to the remote protocol not having a good way to send thread creation/destruction events.) We fix this by using the host thread ID for the identifier passed to GDB when debugging a multi-threaded userspace program. The thread ID might wrap, but the same sort of problems with wrapping thread IDs would come up with debugging programs natively, so this doesn't represent a problem. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
2009-05-26microblaze: Add GDB stub support.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-04-18Add 'static' to avoid a sparse warningblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7175 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-13Fix ppc-softmmu warnings on OpenBSD hostblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7099 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-08factor out setting pc in gdbstubaurel32
The code for handling the c and s packets both contain code for setting the pc. Move that code out to a common function. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7039 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05gdbstub: Rework configuration via command line and monitor (Jan Kiszka)aliguori
Introduce a more canonical gdbstub configuration (system emulation only) via the new switch '-gdb dev'. Keep '-s' as shorthand for '-gdb tcp::1234'. Use the same syntax also for the corresponding monitor command 'gdbserver'. Its default remains to listen on TCP port 1234. Changes in v4: - Rebased over new command line switches meta file Changes in v3: - Fix documentation Changes in v2: - Support for pipe-based like to gdb (target remote | qemu -gdb stdio) - Properly update the qemu-doc Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6992 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28gdbstub: Allow re-instantiation (Jan Kiszka)aliguori
[ Note: depends on char closing fixes ] Properly clean up the gdbstub when the user tries to re-open it (possibly under a different address). Moreover, allow to shut it down from the monitor via 'gdbserver none'. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6913 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28gdbstub: Drop redundant memset after qemu_mallocz (Jan Kiszka)aliguori
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6897 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-12Guest debugging support for KVM (Jan Kiszka)aliguori
This is a backport of the guest debugging support for the KVM accelerator that is now part of the KVM tree. It implements the reworked KVM kernel API for guest debugging (KVM_CAP_SET_GUEST_DEBUG) which is not yet part of any mainline kernel but will probably be 2.6.30 stuff. So far supported is x86, but PPC is expected to catch up soon. Core features are: - unlimited soft-breakpoints via code patching - hardware-assisted x86 breakpoints and watchpoints Changes in this version: - use generic hook cpu_synchronize_state to transfer registers between user space and kvm - push kvm_sw_breakpoints into KVMState Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6825 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Use a dedicated function to request exit from execution loopaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6762 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Fix BSD userblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6734 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Pass-through for gdbstub (Jan Kiszka)aliguori
Create a monitor terminal and pass it through the gdbstub. This allows to use gdb's monitor command to access the QEMU monitor. Works for all commands except for non-detached migration and password retrieval (user will receive error messages instead). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6718 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05toplevel: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6531 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-24target-ppc: Change core powerpc gdbstub bits to be XML-awareaurel32
Define GDB_CORE_XML and hack things similarly to ARM so that despite the FP registers coming in between the GPRs and some status registers, everything works out OK no matter which kind of GDB we're communicating with. It matters whether we're built to target 64-bit or 32-bit cores. I think there are still problems if we are debugging 32-bit programs on a built-for-64-bit QEMU (QEMU will always send 64-bit registers), but I don't know if there's a good way around that at the time being. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6421 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-22Rework vm_state_change notifiers (Jan Kiszka)aliguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6402 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-18add an init function parameter to qemu_chr_open()aurel32
And use it for the malta emulation. Fix segfault introduced in revision 6352. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6365 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-15Fix bsd-user buildblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6312 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Fix gdbserver number of registers (Tristan Gingold)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6280 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07gdbstub: fix gdbserver_forkedgar_igl
As reported by Martin Mohring fork doesn't work with NPTL. A fix is attached that makes the also attached test run (tested with ARM CodeSourcery 2008q3 on an x86_64 Fedora Core with kernel 2.6.23). Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6195 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-04Update FSF address in GPL/LGPL boilerplateaurel32
The attached patch updates the FSF address in the GPL/LGPL boilerplate in most GPL/LGPLed files, and also in COPYING.LIB. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18User-mode GDB stub improvements - handle signalsaurel32
Handle signals in the user-mode GDB stub. Report them to GDB, and allow it to change or cancel them. Also correct the protocol numbering; it happens to match Linux numbering for SIGINT and SIGTRAP, but that's just good fortune. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6096 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18User-mode GDB stub improvements - handle forkaurel32
Close gdbserver in child processes, so that only one stub tries to talk to GDB at a time. Updated from an earlier patch by Paul Brook. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6095 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07target-alpha: gdb-stub supportaurel32
(Vince Weaver) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5945 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07gdbstub: kill a warningaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5943 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07Fix some new warnings introduced after r5022blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5933 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-30gdbstub: Fix access to PPC FPRsaurel32
Obviously, someone forgot to rebase the index before accessing one of the 32 FPRs. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5821 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-18gdbstub: manage CPUs as threads (Jan Kiszka)aliguori
This patch enhances QEMU's built-in debugger for SMP guest debugging. Using the thread support of the gdb remote protocol, each VCPU is mapped on a pseudo thread and exposed to the gdb frontend. This way you can easy switch the focus of gdb between the VCPUs and observe their states. On breakpoint hit, the focus is automatically adjusted just as for normal multi-threaded application under gdb control. Furthermore, the patch propagates breakpoint and watchpoint insertions or removals to all CPUs, not just the current one as it was the case so far. Without this, SMP guest debugging was practically unfeasible. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5743 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-18Refactor and enhance break/watchpoint API (Jan Kiszka)aliguori
This patch prepares the QEMU cpu_watchpoint/breakpoint API to allow the succeeding enhancements this series comes with. First of all, it overcomes MAX_BREAKPOINTS/MAX_WATCHPOINTS by switching to dynamically allocated data structures that are kept in linked lists. This also allows to return a stable reference to the related objects, required for later introduced x86 debug register support. Breakpoints and watchpoints are stored with their full information set and an additional flag field that makes them easily extensible for use beyond pure guest debugging. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5738 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-18gdbstub: Return appropriate watch message to gdb (Jan Kiszka)aliguori
Return the appropriate type prefix (r, a, none) when reporting watchpoint hits to the gdb front-end. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5737 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-31Implement "info chardev" command. (Gerd Hoffmann)aliguori
This patch makes qemu keep track of the character devices in use and implements a "info chardev" monitor command to print a list. qemu_chr_open() sticks the devices into a linked list now. It got a new argument (label), so there is a name for each device. It also assigns a filename to each character device. By default it just copyes the filename passed in. Individual drivers can fill in something else though. qemu_chr_open_pty() sets the filename to name of the pseudo tty allocated. Output looks like this: (qemu) info chardev monitor: filename=unix:/tmp/run.sh-26827/monitor,server,nowait serial0: filename=unix:/tmp/run.sh-26827/console,server serial1: filename=pty:/dev/pts/5 parallel0: filename=vc:640x480 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5575 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-25Use snprintf to please OpenBSD linkerblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5529 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-21target-ppc: Convert XER accesses to TCGaurel32
Define XER bits as a single register and access them individually to avoid defining 5 32-bit registers (TCG doesn't permit to map 8-bit registers). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5500 c046a42c-6fe2-441c-8c8c-71466251a162