aboutsummaryrefslogtreecommitdiff
path: root/exec.c
AgeCommit message (Collapse)Author
2012-02-01exec.c: Clarify comment about tlb_flush() flush_global parameterPeter Maydell
Clarify the comment about tlb_flush()'s flush_global parameter, so it is clearer what it does and why it is OK that the implementation currently ignores it. Reviewed-by: Andreas F=C3=A4rber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-21virtio-pci: Fix endianness of virtio configBenjamin Herrenschmidt
The virtio config area in PIO space is a bit special. The initial header is little endian but the rest (device specific) is guest native endian. The PIO accessors for PCI on machines that don't have native IO ports assume that all PIO is little endian, which works fine for everything except the above. A complicated way to fix it would be to split the BAR into two memory regions with different endianess settings, but this isn't practical to do, besides, the PIO code doesn't honor region endianness anyway (I have a patch for that too but it isn't necessary at this stage). So I decided to go for the quick fix instead which consists of reverting the swap in virtio-pci in selected places, hoping that when we eventually do a "v2" of the virtio protocols, we sort that out once and for all using a fixed endian setting for everything. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexander Graf <agraf@suse.de> [agraf: keep virtio in libhw and determine endianness through a helper function in exec.c] Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-13tcg-arm: fix a typo in commentsAurelien Jarno
ARM still doesn't support 16GB buffers in 32-bit modes, replace the 16GB by 16MB in the comment. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-04Remove IO_MEM_SHIFTAvi Kivity
We no longer use any of the lower bits of a ram_addr, so we might as well use them for the io table index. This increases the number of potential I/O handlers by a factor of 8. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Drop IO_MEM_ROMDAvi Kivity
Unlike ->readonly, ->readable is not inherited from aliase, so we can simply query the memory region. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Remove IO_MEM_SUBPAGEAvi Kivity
Replace with a MemoryRegion flag. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Direct dispatch through MemoryRegionAvi Kivity
Now that all mmio goes through MemoryRegions, we can convert io_mem_opaque to be a MemoryRegion pointer, and remove the thunks that convert from old-style CPU{Read,Write}MemoryFunc to MemoryRegionOps. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Convert io_mem_watch to be a MemoryRegionAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Convert IO_MEM_SUBPAGE_RAM to be a MemoryRegionAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Convert the subpage wrapper to be a MemoryRegionAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Switch cpu_register_physical_memory_log() to use MemoryRegionsAvi Kivity
Still internally using ram_addr. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Convert IO_MEM_{RAM,ROM,UNASSIGNED,NOTDIRTY} to MemoryRegionsAvi Kivity
Convert the fixed-address IO_MEM_RAM, IO_MEM_ROM, IO_MEM_UNASSIGNED, and IO_MEM_NOTDIRTY io handlers to MemoryRegions. These aren't real regions, since they are never added to the memory hierarchy, but they allow reuse of the dispatch functionality. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Uninline get_page_addr_code()Avi Kivity
Its use of IO_MEM_ROM and friends will later cause #include loops; and it is too large to merit inlining. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Avoid range comparisons on io index typesAvi Kivity
The code sometimes uses range comparisons on io indexes (e.g. index =< IO_MEM_ROM). Avoid these as they make moving to objects harder. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04Fix wrong region_offset when overlaying a page with anotherAvi Kivity
cpu_register_physical_memory_log() does not update region_offset if a page was previously registered for the same address. This could cause mmio accesses going to the wrong place, by using the old region_offset. Signed-off-by: Avi Kivity <avi@redhat.com> Acked-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04memory: move mmio access to functionsAvi Kivity
Currently mmio access goes directly to the io_mem_{read,write} arrays. In preparation for eliminating them, add indirection via a function. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04exec: make phys_page_find() return a temporaryAvi Kivity
Instead of returning a PhysPageDesc pointer, return a temporary. This lets us move away from actually storing PhysPageDesc's, and instead sythesising them when needed. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04memory: move endianness compensation to memory coreAvi Kivity
Instead of doing device endianness compensation in cpu_register_io_memory(), do it in the memory core. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-01-04memory: obsolete cpu_physical_memory_[gs]et_dirty_tracking()Avi Kivity
The getter is no longer used, so it is completely removed. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-04Store MemoryRegion in RAMBlockAvi Kivity
As a step in moving live migration from RAMBlocks to MemoryRegions, store the MemoryRegion in a RAMBlock. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-04vmstate, memory: decouple vmstate from memory APIAvi Kivity
Currently creating a memory region automatically registers it for live migration. This differs from other state (which is enumerated in a VMStateDescription structure) and ties the live migration code into the memory core. Decouple the two by introducing a separate API, vmstate_register_ram(), for registering a RAM block for migration. Currently the same implementation is reused, but later it can be moved into a separate list, and registrations can be moved to VMStateDescription blocks. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03Remove cpu_get_physical_page_desc()Avi Kivity
No longer used. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03memory: remove CPUPhysMemoryClientAvi Kivity
No longer used. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-20memory: add API for observing updates to the physical memory mapAvi Kivity
Add an API that allows a client to observe changes in the global memory map: - region added (possibly with logging enabled) - region removed (possibly with logging enabled) - logging started on a region - logging stopped on a region - global logging started - global logging removed This API will eventually replace cpu_register_physical_memory_client(). Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-19memory: move obsolete exec.c functions to a private headerAvi Kivity
This will help avoid accidental usage. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-19memory, xen: pass MemoryRegion to xen_ram_alloc()Avi Kivity
Currently xen_ram_alloc() relies on ram_addr, which is going away. Give it something else to use as a cookie. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-15phys_page_find_alloc: Use correct initial region_offset.Alex Rozenman
This fixes a common bug with initial region_offset value. Usually, the pages are re-assigned afterwards, so the bug has a very small effect on regular QEMU use flows. Signed-off-by: Alex Rozenman <Alex_Rozenman@mentor.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-15exec.c: Fix subpage memory access to RAM MemoryRegionAndreas Färber
Commit 95c318f5e1f88d7e5bcc6deac17330fd4806a2d3 (Fix segfault in mmio subpage handling code.) prevented a segfault by making all subpage registrations over an existing memory page perform an unassigned access. Symptoms were writes not taking effect and reads returning zero. Very small page sizes are not currently supported either, so subpage memory areas cannot fully be avoided. Therefore change the previous fix to use a new IO_MEM_SUBPAGE_RAM instead of IO_MEM_UNASSIGNED. Suggested by Avi. Reviewed-by: Avi Kivity <avi@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Avi Kivity <avi@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-14tcg/arm: remove fixed map code buffer restrictionDr. David Alan Gilbert
On ARM, don't map the code buffer at a fixed location, and fix up the call/goto tcg routines to let it do long jumps. Mapping the code buffer at a fixed address could sometimes result in it being mapped over the top of the heap with pretty random results. Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-10w32: Disable buffering for log fileStefan Weil
W32 does not support line buffering, but it supports unbuffered output. Unbuffered output is better for writing to qemu.log than fully buffered output because it also shows the latest log messages when an application crash occurs. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-11-01Make cpu_single_env thread-localPaolo Bonzini
Make cpu_single_env thread-local. This fixes a regression in handling of multi-threaded programs in linux-user mode (bug 823902). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [Peter Maydell: rename tls_cpu_single_env to cpu_single_env] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01Error check find_ram_offsetAlex Williamson
Spotted via code review, we initialize offset to 0 to avoid a compiler warning, but in the unlikely case that offset is never set to something else, we should abort instead of return a value that will almost certainly cause problems. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-26exec.c: Remove useless comment陳韋任
As phys_ram_size had been removed since QEMU 0.12. Remove the useless comment. Signed-off-by: Chen Wen-Ren <chenwj@iis.sinica.edu.tw> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-21qemu-timer: move icount to cpus.cPaolo Bonzini
None of this is needed by tools, and most of it can even be made static inside cpus.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-10-01Move GETPC from dyngen-exec.h to exec-all.hBlue Swirl
GETPC() can be used even from outside of helper code. Move the macro to a more accessible location. Avoid a compile warning from redefining it in exec.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-21Remove qemu_host_page_bitsStefan Weil
It was introduced with commit 54936004fddc52c321cb3f9a9a51140e782bed5d as host_page_bits but never used. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-12fix QLIST usage for RAM listPaolo Bonzini
Spotted while reviewing the migration thread patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-08Integrate I/O memory regions into qemuAvi Kivity
get_system_io() returns the root I/O memory region. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-07Use mmap to allocate execute memoryTobias Nygren
Use mmap to allocate executable memory on NetBSD as well. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-05Avoid allocating TCG resources in non-TCG modeJan Kiszka
Do not allocate TCG-only resources like the translation buffer when running over KVM or XEN. Saves a "few" bytes in the qemu address space and is also conceptually cleaner. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05memory: use signed arithmeticAvi Kivity
When trying to map an alias of a ram region, where the alias starts at address A and we map it into address B, and A > B, we had an arithmetic underflow. Because we use unsigned arithmetic, the underflow converted into a large number which failed addrrange_intersects() tests. The concrete example which triggered this was cirrus vga mapping the framebuffer at offsets 0xc0000-0xc7fff (relative to the start of the framebuffer) into offsets 0xa0000 (relative to system addres space start). With our favorite analogy of a windowing system, this is equivalent to dragging a subwindow off the left edge of the screen, and failing to clip it into its parent window which is on screen. Fix by switching to signed arithmetic. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29Merge remote-tracking branch 'agraf/xen-next' into stagingAnthony Liguori
2011-07-29exec.c: initialize memory mapAvi Kivity
Allocate the root memory region and initialize it. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-26cpu-common: Have a ram_addr_t of uint64 with Xen.Anthony PERARD
In Xen case, memory can be bigger than the host memory. that mean a 32bits host (and QEMU) should be able to handle a RAM address of 64bits. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-26exec.c: Use ram_addr_t in cpu_physical_memory_rw(...).Anthony PERARD
As the variable pd and addr1 inside the function cpu_physical_memory_rw are mean to handle a RAM address, they should be of the ram_addr_t type instead of unsigned long. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-20Fix unassigned memory access handlingBlue Swirl
cea5f9a28faa528b6b1b117c9ab2d8828f473fef exposed bugs in unassigned memory access handling. Fix them by always passing CPUState to the handlers. Reported-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-17qemu_ram_ptr_length: take ram_addr_t as argumentsStefano Stabellini
qemu_ram_ptr_length should take ram_addr_t as argument rather than target_phys_addr_t because is doing comparisons with RAMBlock addresses. cpu_physical_memory_map should create a ram_addr_t address to pass to qemu_ram_ptr_length from PhysPageDesc phys_offset. Remove code after abort() in qemu_ram_ptr_length. Changes in v2: - handle 0 size in qemu_ram_ptr_length; - rename addr1 to raddr; - initialize raddr to ULONG_MAX. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Fold CONFIG_XEN_MAPCACHE into CONFIG_XENJan Kiszka
Xen won't be enabled if there is no backend support available for the host. And that also means the map cache will work. So drop the separate config switch and move the required stubs over to xen-stub.c. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17xen: Clean up map cache API namingJan Kiszka
The map cache is a Xen thing, so its API should make this clear. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 20:16:28 +0000