aboutsummaryrefslogtreecommitdiff
path: root/docs
AgeCommit message (Collapse)Author
2020-02-20qemu-img: Add --target-is-zero to convertDavid Edmondson
In many cases the target of a convert operation is a newly provisioned target that the user knows is blank (reads as zero). In this situation there is no requirement for qemu-img to wastefully zero out the entire device. Add a new option, --target-is-zero, allowing the user to indicate that an existing target device will return zeros for all reads. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20200205110248.2009589-2-david.edmondson@oracle.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-20docs: qcow2: introduce compression type featureVladimir Sementsov-Ogievskiy
The patch adds a new additional field to the qcow2 header: compression_type, which specifies compression type. If field is absent or zero, default compression type is set: ZLIB, which corresponds to current behavior. New compression type (ZSTD) is to be added in further commit. Suggested-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200131142219.3264-3-vsementsov@virtuozzo.com> [mreitz: s/Bits 3-63: Reserved/Bits 4-63: Reserved/] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-20docs: improve qcow2 spec about extending image headerVladimir Sementsov-Ogievskiy
Make it more obvious how to add new fields to the version 3 header and how to interpret them. The specification is adjusted so that for new defined optional fields: 1. Software may support some of these optional fields and ignore the others, which means that features may be backported to downstream Qemu independently. 2. If we want to add incompatible field (or a field, for which some of its values would be incompatible), it must be accompanied by incompatible feature bit. Also the concept of "default is zero" is clarified, as it's strange to say that the value of the field is assumed to be zero for the software version which don't know about the field at all and don't know how to treat it be it zero or not. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200131142219.3264-2-vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> [mreitz: s/some its/some of its/] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-15configure: Check that sphinx-build is using Python 3Peter Maydell
Currently configure's has_sphinx_build() check simply runs a dummy sphinx-build and either passes or fails. This means that "no sphinx-build at all" and "sphinx-build exists but is too old" are both reported the same way. Further, we want to assume that all the Python we write is running with at least Python 3.5; configure checks that for our scripts, but Sphinx extensions run with whatever Python version sphinx-build itself is using. Add a check to our conf.py which makes sphinx-build fail if it would be running our extensions with an old Python, and handle this in configure so we can report failure helpfully to the user. This will mean that configure --enable-docs will fail like this if the sphinx-build provided is not suitable: Warning: sphinx-build exists but it is either too old or uses too old a Python version ERROR: User requested feature docs configure was not able to find it. Install texinfo, Perl/perl-podlators and a Python 3 version of python-sphinx (As usual, the default is to simply not build the docs, as we would if sphinx-build wasn't present at all.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20200213175647.17628-3-peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-10docs: add virtiofsd(1) man pageStefan Hajnoczi
Document the virtiofsd(1) program and its command-line options. This man page is a rST conversion of the original texi documentation that I wrote. Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-07docs/arm-cpu-features: Make kvm-no-adjvtime comment clearerPhilippe Mathieu-Daudé
The bold text sounds like 'knock knock'. Only bolding the second 'not' makes it easier to read. Fixes: dea101a1ae Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200206225148.23923-1-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-06Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-02-06' into ↵Peter Maydell
staging nbd patches for 2020-02-06 - Allow setting NBD description from QMP for parity with qemu-nbd - Remove deprecated 'qemu-nbd --partition' # gpg: Signature made Thu 06 Feb 2020 12:50:46 GMT # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2020-02-06: qemu-nbd: Removed deprecated --partition option docs: Fix typo in qemu-nbd -P replacement nbd: Allow description when creating NBD blockdev Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-06qemu-img: Place the '-i aio' option in alphabetical orderJulia Suvorova
The '-i AIO' option was accidentally placed after '-n' and '-t'. Move it after '--flush-interval'. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200205163008.204493-1-jusual@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-05qemu-nbd: Removed deprecated --partition optionEric Blake
The option was deprecated in 4.0.0 (commit 0ae2d546); it's now been long enough with no complaints to follow through with that process. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200123164650.1741798-3-eblake@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-02-04docs/devel: Fix qtest paths and info about check-block in testing.rstThomas Huth
The qtests have recently been moved to a separate subdirectory, so the paths that are mentioned in the documentation have to be adjusted accordingly. And some of the iotests are now always run as part of "make check", so this information has to be adjusted here, too. Message-Id: <20200122134511.23806-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-03virtfs-proxy-helper: Convert documentation to rSTPeter Maydell
The virtfs-proxy-helper documentation is currently in fsdev/qemu-trace-stap.texi in Texinfo format, which we present to the user as: * a virtfs-proxy-helper manpage * but not (unusually for QEMU) part of the HTML docs Convert the documentation to rST format that lives in the docs/ subdirectory, and present it to the user as: * a virtfs-proxy-helper manpage * part of the interop/ Sphinx manual There are minor formatting changes to suit Sphinx, but no content changes. In particular I've split the -u and -g options into each having their own description text. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Greg Kurz <groug@kaod.org> Message-id: 20200124162606.8787-9-peter.maydell@linaro.org
2020-02-03scripts/qemu-trace-stap: Convert documentation to rSTPeter Maydell
The qemu-trace-stap documentation is currently in scripts/qemu-trace-stap.texi in Texinfo format, which we present to the user as: * a qemu-trace-stap manpage * but not (unusually for QEMU) part of the HTML docs Convert the documentation to rST format that lives in the docs/ subdirectory, and present it to the user as: * a qemu-trace-stap manpage * part of the interop/ Sphinx manual There are minor formatting changes to suit Sphinx, but no content changes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200124162606.8787-8-peter.maydell@linaro.org
2020-02-03qemu-img: Convert invocation documentation to rSTPeter Maydell
The qemu-img documentation is currently in qemu-nbd.texi in Texinfo format, which we present to the user as: * a qemu-img manpage * a section of the main qemu-doc HTML documentation Convert the documentation to rST format, and present it to the user as: * a qemu-img manpage * part of the interop/ Sphinx manual The qemu-img rST document uses the new hxtool extension to handle pulling rST fragments out of qemu-img-cmds.hx. The documentation of the various options and commands is rather muddled, with some options being described inside the relevant command description and some in a more general section near the start of the manual. All the command synopses are replicated in the .hx file and then again in the manual. A lot of text is also duplicated in the qemu-img.c code for the help text. I have not attempted to deal with any of this, but have simply transposed the existing structure into rST. As usual, there are some minor formatting changes but no textual changes, except that as with one or two other conversions I have dropped the 'see also' section since it's not very informative and looks odd in the HTML. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200124162606.8787-6-peter.maydell@linaro.org
2020-02-03docs/sphinx: Add new hxtool Sphinx extensionPeter Maydell
Some of our documentation includes sections which are created by assembling fragments of texinfo from a .hx source file into a .texi file, which is then included from qemu-doc.texi or qemu-img.texi. For Sphinx, rather than creating a file to include, the most natural way to handle this is to have a small custom Sphinx extension which reads the .hx file and process it. So instead of: * makefile produces foo.texi from foo.hx * qemu-doc.texi says '@include foo.texi' we have: * qemu-doc.rst says 'hxtool-doc:: foo.hx' * the Sphinx extension for hxtool has code that runs to handle that Sphinx directive which reads the .hx file and emits the appropriate documentation contents This is pretty much the same way the kerneldoc extension works right now. It also has the advantage that it should work for third-party services like readthedocs that expect to build the docs directly with sphinx rather than by invoking our makefiles. In this commit we implement the hxtool extension. Note that syntax errors in the rST fragments will be correctly reported to the user with the filename and line number within the hx file. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200124162606.8787-4-peter.maydell@linaro.org
2020-02-02docs/specs/tpm: reST-ify TPM documentationMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20200121152935.649898-7-stefanb@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-02tpm_spapr: Support TPM for ppc64 using CRQ based interfaceStefan Berger
Implement support for TPM on ppc64 by implementing the vTPM CRQ interface as a frontend. It can use the tpm_emulator driver backend with the external swtpm. The Linux vTPM driver for ppc64 works with this emulation. This TPM emulator also handles the TPM 2 case. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200121152935.649898-4-stefanb@linux.ibm.com> [dwg: Use device_class_set_props(), tweak Kconfig] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-02hw/ppc/prep: Remove the deprecated "prep" machine and the OpenHackware BIOSThomas Huth
It's been deprecated since QEMU v3.1. The 40p machine should be used nowadays instead. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200114114617.28854-1-thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-31Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging Pull request # gpg: Signature made Thu 30 Jan 2020 21:38:06 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: qemu_set_log_filename: filename argument may be NULL hw/display/qxl.c: Use trace_event_get_state_backends() memory.c: Use trace_event_get_state_backends() docs/devel/tracing.txt: Recommend only trace_event_get_state_backends() Makefile: Keep trace-events-subdirs ordered Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30docs/devel/tracing.txt: Recommend only trace_event_get_state_backends()Peter Maydell
Instead of recommending checking the TRACE_FOO_ENABLED macro to skip expensive computations needed only for tracing, recommend only using trace_event_get_state_backends(). This works for both compile-time and run-time disabling of events, and has no extra performance impact if the event is compile-time disabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200120151142.18954-2-peter.maydell@linaro.org Message-Id: <20200120151142.18954-2-peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-30qemu-nbd: adds option for aio enginesAarushi Mehta
Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200120141858.587874-14-stefanha@redhat.com Message-Id: <20200120141858.587874-14-stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-01-30target/arm/cpu: Add the kvm-no-adjvtime CPU propertyAndrew Jones
kvm-no-adjvtime is a KVM specific CPU property and a first of its kind. To accommodate it we also add kvm_arm_add_vcpu_properties() and a KVM specific CPU properties description to the CPU features document. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-7-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30docs/devel/reset.rst: add doc about Resettable interfaceDamien Hedde
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200123132823.1117486-10-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-27docs/devel: fix stable process doc formattingCornelia Huck
Enumeration of stable criteria needs proper bullet points. Message-Id: <20200113103023.31255-1-cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-01-27Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Register qdev properties as class properties (Marc-André) * Cleanups (Philippe) * virtio-scsi fix (Pan Nengyuan) * Tweak Skylake-v3 model id (Kashyap) * x86 UCODE_REV support and nested live migration fix (myself) * Advisory mode for pvpanic (Zhenwei) # gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) build-sys: clean up flags included in the linker command line target/i386: Add the 'model-id' for Skylake -v3 CPU models qdev: use object_property_help() qapi/qmp: add ObjectPropertyInfo.default-value qom: introduce object_property_help() qom: simplify qmp_device_list_properties() vl: print default value in object help qdev: register properties as class properties qdev: move instance properties to class properties qdev: rename DeviceClass.props qdev: set properties with device_class_set_props() object: return self in object_ref() object: release all props object: add object_class_property_add_link() object: express const link with link property object: add direct link flag object: rename link "child" to "target" object: check strong flag with & object: do not free class properties object: add object_property_set_default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-24pvpanic: implement crashloaded event handlingzhenwei pi
Handle bit 1 write, then post event to monitor. Suggested by Paolo, declear a new event, using GUEST_PANICKED could cause upper layers to react by shutting down or rebooting the guest. In advance for extention, add GuestPanicInformation in event message. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24pvpanic: introduce crashloaded for pvpaniczhenwei pi
Add bit 1 for pvpanic. This bit means that guest hits a panic, but guest wants to handle error by itself. Typical case: Linux guest runs kdump in panic. It will help us to separate the abnormal reboot from normal operation. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20200114023102.612548-2-pizhenwei@bytedance.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b' into staging virtiofsd first pull v2 Import our virtiofsd. This pulls in the daemon to drive a file system connected to the existing qemu virtiofsd device. It's derived from upstream libfuse with lots of changes (and a lot trimmed out). The daemon lives in the newly created qemu/tools/virtiofsd Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> v2 drop the docs while we discuss where they should live and we need to redo the manpage in anything but texi # gpg: Signature made Thu 23 Jan 2020 16:45:18 GMT # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b: (108 commits) virtiofsd: add some options to the help message virtiofsd: stop all queue threads on exit in virtio_loop() virtiofsd/passthrough_ll: Pass errno to fuse_reply_err() virtiofsd: Convert lo_destroy to take the lo->mutex lock itself virtiofsd: add --thread-pool-size=NUM option virtiofsd: fix lo_destroy() resource leaks virtiofsd: prevent FUSE_INIT/FUSE_DESTROY races virtiofsd: process requests in a thread pool virtiofsd: use fuse_buf_writev to replace fuse_buf_write for better performance virtiofsd: add definition of fuse_buf_writev() virtiofsd: passthrough_ll: Use cache_readdir for directory open virtiofsd: Fix data corruption with O_APPEND write in writeback mode virtiofsd: Reset O_DIRECT flag during file open virtiofsd: convert more fprintf and perror to use fuse log infra virtiofsd: do not always set FUSE_FLOCK_LOCKS virtiofsd: introduce inode refcount to prevent use-after-free virtiofsd: passthrough_ll: fix refcounting on remove/rename libvhost-user: Fix some memtable remap cases virtiofsd: rename inode->refcount to inode->nlookup virtiofsd: prevent races with lo_dirp_put() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-23virtiofsd: add --print-capabilities optionStefan Hajnoczi
Add the --print-capabilities option as per vhost-user.rst "Backend programs conventions". Currently there are no advertised features. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-23qemu-block-drivers: Convert to rSTPeter Maydell
The qemu-block-drivers documentation is currently in docs/qemu-block-drivers.texi in Texinfo format, which we present to the user as: * a qemu-block-drivers manpage * a section of the main qemu-doc HTML documentation Convert the documentation to rST format, and present it to the user as: * a qemu-block-drivers manpage * part of the system/ Sphinx manual This follows the same pattern we've done for qemu-ga and qemu-nbd. We have to drop a cross-reference from the documentation of the -cdrom option back to the qemu-block-drivers documentation, since they're no longer within the same texinfo document. As noted in a comment, the manpage output is slightly compromised due to limitations in Sphinx. In an ideal world, the HTML output would have the various headings like 'Disk image file formats' as top-level section headings (which then appear in the overall system manual's table-of-contents), and it would not have the section headings which make sense only for the manpage like 'synopsis', 'description', and 'see also'. Unfortunately, the mechanism Sphinx provides for restricting pieces of documentation is limited to the point of being flawed: the 'only::' directive is implemented as a filter that is applied at a very late stage in the document processing pipeline, rather than as an early equivalent of an #ifdef. This means that Sphinx's process of identifying which section heading markup styles are which levels of heading gets confused if the 'only::' directive contains section headings which would affect the heading-level of a later heading. I have opted to prioritise making the HTML format look better, with the compromise being that in the manpage the 'Disk image file formats' &c headings are top-level headings rather than being sub-headings under the traditional 'Description' top-level section title. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200116141511.16849-4-peter.maydell@linaro.org
2020-01-23docs: Create stub system manualPeter Maydell
We want a user-facing manual which contains system emulation documentation. Create an empty one which we can populate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200116141511.16849-3-peter.maydell@linaro.org
2020-01-23qemu-nbd: Convert invocation documentation to rSTPeter Maydell
The qemu-nbd documentation is currently in qemu-nbd.texi in Texinfo format, which we present to the user as: * a qemu-nbd manpage * a section of the main qemu-doc HTML documentation Convert the documentation to rST format, and present it to the user as: * a qemu-nbd manpage * part of the interop/ Sphinx manual This follows the same pattern as commit 27a296fce982 did for the qemu-ga manpage. All the content of the old manpage is retained, except that I have dropped the "This is free software; see the source for copying conditions. There is NO warranty..." text that was in the old AUTHOR section; Sphinx's manpage builder doesn't expect that much text in the AUTHOR section, and since none of our other manpages have it it seems easiest to delete it rather than try to figure out where else in the manpage to put it. The only other textual change is that I have had to give the --nocache option its own description ("Equivalent to --cache=none") because Sphinx doesn't have an equivalent of using item/itemx to share a description between two options. Some minor aspects of the formatting have changed, to suit what is easiest for Sphinx to output. (The most notable is that Sphinx option section option syntax doesn't support '--option foo=bar' with bar underlined rather than bold, so we have to switch to '--option foo=BAR' instead.) The contents of qemu-option-trace.texi are now duplicated in docs/interop/qemu-option-trace.rst.inc, until such time as we complete the conversion of the other files which use it; since it has had only 3 changes in 3 years, this shouldn't be too awkward a burden. (We use .rst.inc because if this file fragment has a .rst extension then Sphinx complains about not seeing it in a toctree.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20200116141511.16849-2-peter.maydell@linaro.org
2020-01-22acpi: cpuhp: add CPHP_GET_CPU_ID_CMD commandIgor Mammedov
Firmware can enumerate present at boot APs by broadcasting wakeup IPI, so that woken up secondary CPUs could register them-selves. However in CPU hotplug case, it would need to know architecture specific CPU IDs for possible and hotplugged CPUs so it could prepare environment for and wake hotplugged AP. Reuse and extend existing CPU hotplug interface to return architecture specific ID for currently selected CPU in 2 registers: - lower 32 bits in ACPI_CPU_CMD_DATA_OFFSET_RW - upper 32 bits in ACPI_CPU_CMD_DATA2_OFFSET_R On x86, firmware will use CPHP_GET_CPU_ID_CMD for fetching the APIC ID when handling hotplug SMI. Later, CPHP_GET_CPU_ID_CMD will be used on ARM to retrieve MPIDR, which serves the similar to APIC ID purpose. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1575896942-331151-10-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-01-22acpi: cpuhp: spec: add typical usecasesIgor Mammedov
Document work-flows for * enabling/detecting modern CPU hotplug interface * finding a CPU with pending 'insert/remove' event * enumerating present and possible CPUs Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1575896942-331151-9-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-01-22acpi: cpuhp: introduce 'Command data 2' fieldIgor Mammedov
No functional change in practice, patch only aims to properly document (in spec and code) intended usage of the reserved space. The new field is to be used for 2 purposes: - detection of modern CPU hotplug interface using CPHP_GET_NEXT_CPU_WITH_EVENT_CMD command. procedure will be described in follow up patch: "acpi: cpuhp: spec: add typical usecases" - for returning upper 32 bits of architecture specific CPU ID, for new CPHP_GET_CPU_ID_CMD command added by follow up patch: "acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command" Change is backward compatible with 4.2 and older machines, as field was unconditionally reserved and always returned 0x0 if modern CPU hotplug interface was enabled. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1575896942-331151-8-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-01-22acpi: cpuhp: spec: clarify store into 'Command data' when 'Command field' == 0Igor Mammedov
Write section of 'Command data' register should describe what happens when it's written into. Correct description in case the last stored 'Command field' value is equal to 0, to reflect that currently it's not supported. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1575896942-331151-7-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-22acpi: cpuhp: spec: fix 'Command data' descriptionIgor Mammedov
Correct returned value description in case 'Command field' == 0x0, it's not PXM but CPU selector value with pending event In addition describe 0 blanket value in case of not supported 'Command field' value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1575896942-331151-6-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-22acpi: cpuhp: spec: clarify 'CPU selector' register usage and endiannessIgor Mammedov
* Move reserved registers to the top of the section, so reader would be aware of effects when reading registers description. * State registers endianness explicitly at the beginning of the section * Describe registers behavior in case of 'CPU selector' register contains value that doesn't point to a possible CPU. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1575896942-331151-5-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-17Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200115' into stagingPeter Maydell
Add cpu_{ld,st}*_mmuidx_ra Remove MMU_MODE*_SUFFIX Move tcg headers under include/ # gpg: Signature made Thu 16 Jan 2020 01:36:41 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20200115: (34 commits) MAINTAINERS: Replace Claudio Fontana for tcg/aarch64 configure: Remove tcg/ from the preprocessor include search list tcg: Move TCG headers to include/tcg/ tcg: Search includes in the parent source directory tcg: Search includes from the project root source directory cputlb: Expand cpu_ldst_template.h in cputlb.c cputlb: Remove support for MMU_MODE*_SUFFIX target/ppc: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX target/s390x: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX target/mips: Use cpu_*_mmuidx_ra instead of MMU_MODE*_SUFFIX target/m68k: Use cpu_*_mmuidx_ra instead of MMU_MODE{0,1}_SUFFIX target/xtensa: Remove MMU_MODE{0,1,2,3}_SUFFIX target/unicore32: Remove MMU_MODE{0,1}_SUFFIX target/sh4: Remove MMU_MODE{0,1}_SUFFIX target/microblaze: Remove MMU_MODE{0,1,2}_SUFFIX target/i386: Remove MMU_MODE{0,1,2}_SUFFIX target/cris: Remove MMU_MODE{0,1}_SUFFIX target/alpha: Remove MMU_MODE{0,1}_SUFFIX target/nios2: Remove MMU_MODE{0,1}_SUFFIX cputlb: Expand cpu_ldst_useronly_template.h in user-exec.c ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-15cputlb: Provide cpu_(ld,st}*_mmuidx_ra for user-onlyRichard Henderson
This finishes the new interface began with the previous patch. Document the interface and deprecate MMU_MODE<N>_SUFFIX. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-15cputlb: Rename helper_ret_ld*_cmmu to cpu_ld*_codeRichard Henderson
There are no uses of the *_cmmu names other than the bare wrapping within the *_code inlines. Therefore rename the functions so we can drop the inlines. Use abi_ptr instead of target_ulong in preparation for user-only; the two types are identical for softmmu. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-14Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-01-14' into ↵Peter Maydell
staging QAPI patches for 2020-01-14 # gpg: Signature made Tue 14 Jan 2020 10:15:22 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2020-01-14: qapi: Simplify QAPISchemaModularCVisitor qapi: Fix code generation for empty modules qapi: Proper intermediate representation for modules qapi: Generate command registration stuff into separate files tests/Makefile.include: Fix missing test-qapi-emit-events.[ch] qapi: Tweak "command returns a nice type" check for clarity Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-14qapi: Generate command registration stuff into separate filesMarkus Armbruster
Having to include qapi-commands.h just for qmp_init_marshal() is suboptimal. Generate it into separate files. This lets monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h include less. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191120182551.23795-4-armbru@redhat.com> [Typos in docs/devel/qapi-code-gen.txt fixed] Reviewed-by: Eric Blake <eblake@redhat.com>
2020-01-13Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2020-01-12' into staging * Move qtests into a separate directory * Build index.html for docs # gpg: Signature made Sun 12 Jan 2020 11:21:41 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2020-01-12: docs: build an index page for the HTML docs tests/libqos: Move the libqos files under tests/qtest/ tests/Makefile: Move qtest-related settings to a separate Makefile.include test: Move qtests to a separate directory tests/Makefile: Separate unit test dependencies from qtest dependencies tests/Makefile: Remove 'tests/' and '$(EXESUF)' from the check-qtest variables tests/ptimer: Remove unnecessary inclusion of libqtest.h tests/Makefile: test-char does not need libqtest Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-12docs: build an index page for the HTML docsStefan Hajnoczi
There is no index.html start page for the QEMU HTML documentation. An index page is needed so that documentation can be browsed easily on the web. This patch adds an index.html.in template file where the QEMU version number is expanded. It is written in HTML instead of using the existing sphinx (rST) and texi documentation generators because they are heavyweight and would make this harder. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20191219135620.1626608-1-stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-10Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Compat machines fix (Denis) * Command line parsing fixes (Michal, Peter, Xiaoyao) * Cooperlake CPU model fixes (Xiaoyao) * i386 gdb fix (mkdolata) * IOEventHandler cleanup (Philippe) * icount fix (Pavel) * RR support for random number sources (Pavel) * Kconfig fixes (Philippe) # gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (38 commits) chardev: Use QEMUChrEvent enum in IOEventHandler typedef chardev: use QEMUChrEvent instead of int chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler hw/ipmi: Remove unnecessary declarations target/i386: Add missed features to Cooperlake CPU model target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub hw/rtc/mc146818: Add missing dependency on ISA Bus hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, pci, pc: fixes, features Bugfixes all over the place. HMAT support. New flags for vhost-user-blk utility. Auto-tuning of seg max for virtio storage. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (32 commits) intel_iommu: add present bit check for pasid table entries intel_iommu: a fix to vtd_find_as_from_bus_num() virtio-net: delete also control queue when TX/RX deleted virtio: reset region cache when on queue deletion virtio-mmio: update queue size on guest write tests: add virtio-scsi and virtio-blk seg_max_adjust test virtio: make seg_max virtqueue size dependent hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35 vhost-user-scsi: reset the device if supported vhost-user: add VHOST_USER_RESET_DEVICE to reset devices hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument hw/pci/pci_host: Remove redundant PCI_DPRINTF() virtio-mmio: Clear v2 transport state on soft reset ACPI: add expected files for HMAT tests (acpihmat) tests/bios-tables-test: add test cases for ACPI HMAT tests/numa: Add case for QMP build HMAT hmat acpi: Build Memory Side Cache Information Structure(s) hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s) hmat acpi: Build Memory Proximity Domain Attributes Structure(s) numa: Extend CLI to provide memory side cache information ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07replay: record and replay random number sourcesPavel Dovgalyuk
Record/replay feature of icount allows deterministic running of execution scenarios. Some CPUs and peripheral devices read random numbers from external sources making deterministic execution impossible. This patch adds recording and replaying of random read operations into guest-random module, which is used by the virtual hardware. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <157675984852.14505.15709141760677102489.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-06Add dbus-vmstate objectMarc-André Lureau
When instantiated, this object will connect to the given D-Bus bus "addr". During migration, it will take/restore the data from org.qemu.VMState1 instances. See documentation for details. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-06docs: start a document to describe D-Bus usageMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-05vhost-user: add VHOST_USER_RESET_DEVICE to reset devicesRaphael Norwitz
Add a VHOST_USER_RESET_DEVICE message which will reset the vhost user backend. Disabling all rings, and resetting all internal state, ready for the backend to be reinitialized. A backend has to report it supports this features with the VHOST_USER_PROTOCOL_F_RESET_DEVICE protocol feature bit. If it does so, the new message is used instead of sending a RESET_OWNER which has had inconsistent implementations. Signed-off-by: David Vrabel <david.vrabel@nutanix.com> Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1572385083-5254-2-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 04:38:33 +0000