| Age | Commit message (Collapse) | Author |
|---|
|
Add description of new CPU hotplug interface.
To switch from from legacy mode into new mode use fact
that write accesses into CPU present bitmap were never
used before and were ignored by QEMU.
So use it to as a way to switch from legacy mode.
That way pc/q35 machine starts in legacy mode and
QEMU generated ACPI tables will switch to new CPU
hotplug interface during runtime.
In case QEMU is started with legacy BIOS (that doesn't
support QEMU generated ACPI tables), legacy CPU hotplug
will remain active and could be used by BIOS built in
ACPI tables for CPU hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
It describes the basic concepts of NVDIMM ACPI and the interfaces
between QEMU and the ACPI BIOS
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Switch make rules over to use trace-events-all as the
master trace events input file. Add rule that will
construct trace-events-all from $(trace-events-y).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
s/info_migrate_capabilities/info migrate_capabilities
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-14-git-send-email-famz@redhat.com
|
|
Over time, some differences between QEMU and Linux atomics are getting
smoothed. In particular, Linux grew atomic_fetch_or (and in general
the differences regarding RMW operations were not described accurately)
and smp_load_acquire/smp_store_release. Also, set_mb was renamed to
smp_store_mb(). Include these changes in the documentation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Recently Linux did a mass conversion of its atomic_read/set calls
so that they at least are READ/WRITE_ONCE. See Linux's commit
62e8a325 ("atomic, arch: Audit atomic_{read,set}()"). It seems though
that their documentation hasn't been updated to reflect this.
The appended updates our documentation to reflect the change, which
means there is effectively no difference between our atomic_read/set
and the current Linux implementation.
While at it, fix the statement that a barrier is implied by
atomic_read/set, which is incorrect. Volatile/atomic semantics prevent
transformations pertaining the variable they apply to; this, however,
has no effect on surrounding statements like barriers do. For more
details on this, see:
https://gcc.gnu.org/onlinedocs/gcc/Volatiles.html
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1464120374-8950-2-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into staging
VFIO updates 2016-05-26
- Infrastructure and quirks to support IGD assignment (Alex Williamson)
- Fixes to 128bit handling, IOMMU replay, IOMMU translation sanity
checking (Alexey Kardashevskiy)
# gpg: Signature made Thu 26 May 2016 18:50:29 BST using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
* remotes/awilliam/tags/vfio-update-20160526.1:
vfio: Check that IOMMU MR translates to system address space
memory: Fix IOMMU replay base address
vfio: Fix 128 bit handling when deleting region
vfio/pci: Add IGD documentation
vfio/pci: Add a separate option for IGD OpRegion support
vfio/pci: Intel graphics legacy mode assignment
vfio/pci: Setup BAR quirks after capabilities probing
vfio/pci: Consolidate VGA setup
vfio/pci: Fix return of vfio_populate_vga()
vfio: Create device specific region info helper
vfio: Enable sparse mmap capability
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Document the usage modes, host primary graphics considerations, usage,
and fw_cfg ABI required for IGD assignment with vfio.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The post-copy code does some I/O to/from an intermediate
in-memory buffer rather than direct to the underlying
I/O channel. Switch this code to use QIOChannelBuffer
instead of QEMUSizedBuffer.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-12-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Add a missing end brace and update doc to point to the latest access
macro. ACCESS_ONCE() is deprecated.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <1462198852-28694-1-git-send-email-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Returning a partial object on error is an invitation for a careless
caller to leak memory. We already fixed things in an earlier
patch to guarantee NULL if visit_start fails ("qapi: Guarantee
NULL obj on input visitor callback error"), but that does not
help the case where visit_start succeeds but some other failure
happens before visit_end, such that we leak a partially constructed
object outside visit_type_FOO(). As no one outside the testsuite
was actually relying on these semantics, it is cleaner to just
document and guarantee that ALL pointer-based visit_type_FOO()
functions always leave a safe value in *obj during an input visitor
(either the new object on success, or NULL if an error is
encountered), so callers can now unconditionally use
qapi_free_FOO() to clean up regardless of whether an error occurred.
The decision is done by adding visit_is_input(), then updating the
generated code to check if additional cleanup is needed based on
the type of visitor in use.
Note that we still leave *obj unchanged after a scalar-based
visit_type_FOO(); I did not feel like auditing all uses of
visit_type_Enum() to see if the callers would tolerate a specific
sentinel value (not to mention having to decide whether it would
be better to use 0 or ENUM__MAX as that sentinel).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-25-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The semantics of the list visit are somewhat baroque, with the
following pseudocode when FooList is used:
start()
for (prev = head; cur = next(prev); prev = &cur) {
visit(&cur->value)
}
Note that these semantics (advance before visit) requires that
the first call to next() return the list head, while all other
calls return the next element of the list; that is, every visitor
implementation is required to track extra state to decide whether
to return the input as-is, or to advance. It also requires an
argument of 'GenericList **' to next(), solely because the first
iteration might need to modify the caller's GenericList head, so
that all other calls have to do a layer of dereferencing.
Thankfully, we only have two uses of list visits in the entire
code base: one in spapr_drc (which completely avoids
visit_next_list(), feeding in integers from a different source
than uint8List), and one in qapi-visit.py. That is, all other
list visitors are generated in qapi-visit.c, and share the same
paradigm based on a qapi FooList type, so we can refactor how
lists are laid out with minimal churn among clients.
We can greatly simplify things by hoisting the special case
into the start() routine, and flipping the order in the loop
to visit before advance:
start(head)
for (tail = *head; tail; tail = next(tail)) {
visit(&tail->value)
}
With the simpler semantics, visitors have less state to track,
the argument to next() is reduced to 'GenericList *', and it
also becomes obvious whether an input visitor is allocating a
FooList during visit_start_list() (rather than the old way of
not knowing if an allocation happened until the first
visit_next_list()). As a minor drawback, we now allocate in
two functions instead of one, and have to pass the size to
both functions (unless we were to tweak the input visitors to
cache the size to start_list for reuse during next_list, but
that defeats the goal of less visitor state).
The signature of visit_start_list() is chosen to match
visit_start_struct(), with the new parameters after 'name'.
The spapr_drc case is a virtual visit, done by passing NULL for
list, similarly to how NULL is passed to visit_start_struct()
when a qapi type is not used in those visits. It was easy to
provide these semantics for qmp-output and dealloc visitors,
and a bit harder for qmp-input (several prerequisite patches
refactored things to make this patch straightforward). But it
turned out that the string and opts visitors munge enough other
state during visit_next_list() to make it easier to just
document and require a GenericList visit for now; an assertion
will remind us to adjust things if we need the semantics in the
future.
Several pre-requisite cleanup patches made the reshuffling of
the various visitors easier; particularly the qmp input visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
As mentioned in previous patches, we want to call visit_end_struct()
functions unconditionally, so that visitors can release resources
tied up since the matching visit_start_struct() without also having
to worry about error priority if more than one error occurs.
Even though error_propagate() can be safely used to ignore a second
error during cleanup caused by a first error, it is simpler if the
cleanup cannot set an error. So, split out the error checking
portion (basically, input visitors checking for unvisited keys) into
a new function visit_check_struct(), which can be safely skipped if
any earlier errors are encountered, and leave the cleanup portion
(which never fails, but must be called unconditionally if
visit_start_struct() succeeded) in visit_end_struct().
Generated code in qapi-visit.c has diffs resembling:
|@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v,
| goto out_obj;
| }
| visit_type_ACPIOSTInfo_members(v, obj, &err);
|- error_propagate(errp, err);
|- err = NULL;
|+ if (err) {
|+ goto out_obj;
|+ }
|+ visit_check_struct(v, &err);
| out_obj:
|- visit_end_struct(v, &err);
|+ visit_end_struct(v);
| out:
and in qapi-event.c:
@@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
| visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, ¶m, &err);
|- visit_end_struct(v, err ? NULL : &err);
|+ if (!err) {
|+ visit_check_struct(v, &err);
|+ }
|+ visit_end_struct(v);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com>
[Conflict with a doc fixup resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The qmp-input visitor was allowing callers to play rather fast
and loose: when visiting a QDict, you could grab members of the
root dictionary without first pushing into the dict; among the
culprit callers was the generated marshal code on the 'arguments'
dictionary of a QMP command. But we are about to tighten the
input visitor, at which point the generated marshal code MUST
follow the same paradigms as everyone else, of pushing into the
struct before grabbing its keys.
Generated code grows as follows:
|@@ -515,7 +641,12 @@ void qmp_marshal_blockdev_backup(QDict *
| BlockdevBackup arg = {0};
|
| v = qmp_input_get_visitor(qiv);
|+ visit_start_struct(v, NULL, NULL, 0, &err);
|+ if (err) {
|+ goto out;
|+ }
| visit_type_BlockdevBackup_members(v, &arg, &err);
|+ visit_end_struct(v, err ? NULL : &err);
| if (err) {
| goto out;
| }
|@@ -527,7 +715,9 @@ out:
| qmp_input_visitor_cleanup(qiv);
| qdv = qapi_dealloc_visitor_new();
| v = qapi_dealloc_get_visitor(qdv);
|+ visit_start_struct(v, NULL, NULL, 0, NULL);
| visit_type_BlockdevBackup_members(v, &arg, NULL);
|+ visit_end_struct(v, NULL);
| qapi_dealloc_visitor_cleanup(qdv);
| }
The use of 'err ? NULL : &err' is temporary; a later patch will
clean that up when it splits visit_end_struct().
Prior to this patch, the fact that there was no final
visit_end_struct() meant that even though we are using a strict
input visit, the marshalling code was not detecting excess input
at the top level (only in nested levels). Fortunately, we have
code in monitor.c:qmp_check_client_args() that also checks for
no excess arguments at the top level. But as the generated code
is more compact than the manual check, a later patch will clean
up monitor.c to drop the redundancy added here.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-9-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Rather than having two separate ways to create a QMP input
visitor, where the safer approach has the more verbose name,
it is better to consolidate things into a single function
where the caller must explicitly choose whether to be strict
or to ignore excess input. This patch is the strictly
mechanical conversion; the next patch will then audit which
uses can be made stricter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
FW CFG's primary user is QEMU, which uses it to expose configuration
information (in the widest sense) to Firmware. Thus the name FW CFG.
FW CFG can also be used by others for their own purposes. QEMU is
merely acting as transport then. Names starting with opt/ are
reserved for such uses. There is no provision, however, to guide safe
sharing among different such users.
Fix that, loosely following QMP precedence: names should start with
opt/RFQDN/, where RFQDN is a reverse fully qualified domain name you
control.
Based on a more ambitious patch from Michael Tsirkin.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
"number of vrings" doesn't help me understand the purpose of this
message. My understanding is that it is rather the size of the queue (in
modern terms).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The space between 7000 and 8000 is too wide by 1 character.
Also correct the range of vga-window example 0xa0000-0xbffff.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Message-Id: <1458639954-9980-1-git-send-email-weijg.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* FreeBSD build fixes (atomics, qapi/error.h)
* x86 KVM fixes (SynIC, KVM_GET/SET_MSRS)
* Memory API doc fix
* checkpatch fix
* Chardev and socket fixes
* NBD fixes
* exec.c SEGV fix
# gpg: Signature made Tue 05 Apr 2016 10:47:49 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
net: fix missing include of qapi/error.h in netmap.c
nbd: Fix poor debug message
include/qemu/atomic: add compile time asserts
cpus: don't use atomic_read for vm_clock_warp_start
nbd: don't request FUA on FLUSH
doc/memory: update MMIO section
char: ensure all clients are in non-blocking mode
char: fix broken EAGAIN retry on OS-X due to errno clobbering
util: retry getaddrinfo if getting EAI_BADFLAGS with AI_V4MAPPED
checkpatch: add target_ulong to typelist
target-i386: assert that KVM_GET/SET_MSRS can set all requested MSRs
target-i386: do not pass MSR_TSC_AUX to KVM ioctls if CPUID bit is not set
memory: fix segv on qemu_ram_free(block=0x0)
target-i386/kvm: Hyper-V VMBus hypercalls blank handlers
update Linux headers to 4.6
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
There is no memory_region_io(). And remove a stray '-'.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1459507677-16662-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This fixes commit ed7f5f1d8db06fc31352a5ef4f54985e630c575a.
Signed-off-by: Richard W.M. Jones.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1458507614-32470-1-git-send-email-rjones@redhat.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This patch introduces block driver that implement recording
and replaying of block devices' operations.
All block completion operations are added to the queue.
Queue is flushed at checkpoints and information about processed requests
is recorded to the log. In replay phase the queue is matched with
events read from the log. Therefore block devices requests are processed
deterministically.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
[ kwolf: Rebased onto modified and already applied part of the series ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
into staging
ivshmem: Fixes, cleanups, device model split
# gpg: Signature made Mon 21 Mar 2016 20:33:54 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-ivshmem-2016-03-18: (40 commits)
contrib/ivshmem-server: Print "not for production" warning
ivshmem: Require master to have ID zero
ivshmem: Drop ivshmem property x-memdev
ivshmem: Clean up after the previous commit
ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem
ivshmem: Replace int role_val by OnOffAuto master
qdev: New DEFINE_PROP_ON_OFF_AUTO
ivshmem: Inline check_shm_size() into its only caller
ivshmem: Simplify memory regions for BAR 2 (shared memory)
ivshmem: Implement shm=... with a memory backend
ivshmem: Tighten check of property "size"
ivshmem: Simplify how we cope with short reads from server
ivshmem: Drop the hackish test for UNIX domain chardev
ivshmem: Rely on server sending the ID right after the version
ivshmem: Propagate errors through ivshmem_recv_setup()
ivshmem: Receive shared memory synchronously in realize()
ivshmem: Plug leaks on unplug, fix peer disconnect
ivshmem: Disentangle ivshmem_read()
ivshmem: Simplify rejection of invalid peer ID from server
ivshmem: Assert interrupts are set up once
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Migration with ivshmem needs to be carefully orchestrated to work.
Exactly one peer (the "master") migrates to the destination, all other
peers need to unplug (and disconnect), migrate, plug back (and
reconnect). This is sort of documented in qemu-doc.
If peers connect on the destination before migration completes, the
shared memory can get messed up. This isn't documented anywhere. Fix
that in qemu-doc.
To avoid messing up register IVPosition on migration, the server must
assign the same ID on source and destination. ivshmem-spec.txt leaves
ID assignment unspecified, however.
Amend ivshmem-spec.txt to require the first client to receive ID zero.
The example ivshmem-server complies: it always assigns the first
unused ID.
For a bit of additional safety, enforce ID zero for the master. This
does nothing when we're not using a server, because the ID is zero for
all peers then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-40-git-send-email-armbru@redhat.com>
|
|
ivshmem can be configured with and without interrupt capability
(a.k.a. "doorbell"). The two configurations have largely disjoint
options, which makes for a confusing (and badly checked) user
interface. Moreover, the device can't tell the guest whether its
doorbell is enabled.
Create two new device models ivshmem-plain and ivshmem-doorbell, and
deprecate the old one.
Changes from ivshmem:
* PCI revision is 1 instead of 0. The new revision is fully backwards
compatible for guests. Guests may elect to require at least
revision 1 to make sure they're not exposed to the funny "no shared
memory, yet" state.
* Property "role" replaced by "master". role=master becomes
master=on, role=peer becomes master=off. Default is off instead of
auto.
* Property "use64" is gone. The new devices always have 64 bit BARs.
Changes from ivshmem to ivshmem-plain:
* The Interrupt Pin register in PCI config space is zero (does not use
an interrupt pin) instead of one (uses INTA).
* Property "x-memdev" is renamed to "memdev".
* Properties "shm" and "size" are gone. Use property "memdev"
instead.
* Property "msi" is gone. The new device can't have MSI-X capability.
It can't interrupt anyway.
* Properties "ioeventfd" and "vectors" are gone. They're meaningless
without interrupts anyway.
Changes from ivshmem to ivshmem-doorbell:
* Property "msi" is gone. The new device always has MSI-X capability.
* Property "ioeventfd" defaults to on instead of off.
* Property "size" is gone. The new device can only map all the shared
memory received from the server.
Guests can easily find out whether the device is configured for
interrupts by checking for MSI-X capability.
Note: some code added in sub-optimal places to make the diff easier to
review. The next commit will move it to more sensible places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-37-git-send-email-armbru@redhat.com>
|
|
This kills off the funny state described in the previous commit.
Simplify ivshmem_io_read() accordingly, and update documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1458066895-20632-27-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
Yes, the chardev is commonly useless after we read a bad version from
it, but destroying it is inappropriate anyway: the user created it, so
the user should be able to hold on to it as long as he likes. We
don't destroy it on other errors. Screwed up in commit 5105b1d.
Stop reading instead.
Also note QEMU's behavior in ivshmem-spec.txt.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-16-git-send-email-armbru@redhat.com>
|
|
This started as an attempt to update ivshmem_device_spec.txt for
clarity, accuracy and completeness while working on its code, and
quickly became a full rewrite. Since the diff would be useless
anyway, I'm using the opportunity to rename the file to
ivshmem-spec.txt.
I tried hard to ensure the new text contradicts neither the old text
nor the code. If the new text contradicts the old text but not the
code, it's probably a bug in the old text. If the new text
contradicts both, its probably a bug in the new text.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-11-git-send-email-armbru@redhat.com>
|
|
Rather than requiring all flat unions to explicitly create
a separate base struct, we can allow the qapi schema to specify
the common members via an inline dictionary. This is similar to
how commands can specify an inline anonymous type for its 'data'.
We already have several struct types that only exist to serve as
a single flat union's base; the next commit will clean them up.
In particular, this patch's change to the BlockdevOptions example
in qapi-code-gen.txt will actually be done in the real QAPI schema.
Now that anonymous bases are legal, we need to rework the
flat-union-bad-base negative test (as previously written, it
forms what is now valid QAPI; tweak it to now provide coverage
of a new error message path), and add a positive test in
qapi-schema-test to use an anonymous base (making the integer
argument optional, for even more coverage).
Note that this patch only allows anonymous bases for flat unions;
simple unions are already enough syntactic sugar that we do not
want to burden them further. Meanwhile, while it would be easy
to also allow an anonymous base for structs, that would be quite
redundant, as the members can be put right into the struct
instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Although we don't want to repeat the entire BlockdevOptions
QMP command in the example, it helps if we aren't needlessly
diverging (the initial example was written before we had
committed the actual QMP interface). Use names that match what
is found in qapi/block-core.json, such as '*read-only' rather
than 'readonly', or 'BlockdevRef' rather than 'BlockRef'.
For the simple union example, invent BlockdevOptionsSimple so
that later text is unambiguous which of the two union forms is
meant (telling the user to refer back to two 'BlockdevOptions'
wasn't nice, and QMP has only the flat union form).
Also, mention that the discriminator of a flat union is
non-optional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-14-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The original choice of ':obj-' as the prefix for implicit types
made it obvious that we weren't going to clash with any user-defined
names, which cannot contain ':'. But now we want to create structs
for implicit types, to get rid of special cases in the generators,
and our use of ':' in implicit names needs a tweak to produce valid
C code.
We could transliterate ':' to '_', except that C99 mandates that
"identifiers that begin with an underscore are always reserved for
use as identifiers with file scope in both the ordinary and tag name
spaces". So it's time to change our naming convention: we can
instead use the 'q_' prefix that we reserved for ourselves back in
commit 9fb081e0. Technically, since we aren't planning on exposing
the empty type in generated code, we could keep the name ':empty',
but renaming it to 'q_empty' makes the check for startswith('q_')
cover all implicit types, whether or not code is generated for them.
As long as we don't declare 'empty' or 'obj' ticklish, it shouldn't
clash with c_name() prepending 'q_' to the user's ticklish names.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
qemu_clock_warp function is called to update virtual clock when CPU
is sleeping. This function includes replay checkpoint to make execution
deterministic in icount mode.
Record/replay module flushes async event queue at checkpoints.
Some of the events (e.g., block devices operations) include interaction
with hardware. E.g., APIC polled by block devices sets one of IRQ flags.
Flag to be set depends on currently executed thread (CPU or iothread).
Therefore in replay mode we have to process the checkpoints in the same thread
as they were recorded.
qemu_clock_warp function (and its checkpoint) may be called from different
thread. This patch decouples two different execution cases of this function:
call when CPU is sleeping from iothread and call from cpu thread to update
virtual clock.
First task is performed by qemu_start_warp_timer function. It sets warp
timer event to the moment of nearest pending virtual timer.
Second function (qemu_account_warp_timer) is called from cpu thread
before execution of the code. It advances virtual clock by adding the length
of period while CPU was sleeping.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160310115609.4812.44986.stgit@PASHA-ISP>
[Update docs. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vhost, virtio, pci, pc, acpi
nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (51 commits)
hw/acpi: fix GSI links UID
ipmi: add some local variables in ipmi_sdr_init
ipmi: remove the need of an ending record in the SDR table
ipmi: use a function to initialize the SDR table
ipmi: add a realize function to the device class
ipmi: add rsp_buffer_set_error() helper
ipmi: remove IPMI_CHECK_RESERVATION() macro
ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers
ipmi: remove IPMI_CHECK_CMD_LEN() macro
MAINTAINERS: machine core
MAINTAINERS: Add an entry for virtio header files
pc: acpi: clarify why possible LAPIC entries must be present in MADT
pc: acpi: drop cpu->found_cpus bitmap
pc: acpi: create Processor and Notify objects only for valid lapics
pc: acpi: create MADT.lapic entries only for valid lapics
pc: acpi: SRAT: create only valid processor lapic entries
pc: acpi: cleanup qdev_get_machine() calls
machine: introduce MachineClass.possible_cpu_arch_ids() hook
pc: init pcms->apic_id_limit once and use it throughout pc.c
pc: acpi: remove NOP assignment
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Introduce QuorumOpType, and make QUORUM_REPORT_BAD compatible
with it.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Postcopy seems to have survived a cycle with only a few fixes,
and Jiri has the current libvirt wired up and working
( https://www.redhat.com/archives/libvir-list/2016-March/msg00080.html )
so remove the experimental tag.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457690016-9070-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1455906029-25565-6-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Probably what happened was that when the API was being designed it
started off with an 'aligned' field, and then later the field name
and semantics were changed but the docs weren't updated to match.
Similarly, cpu_register_io_memory() does not exist anymore, so
clarify the documentation for .old_mmio.
Reported-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In the regions overlap example, region B has a higher priority thus
should has a larger priority number than C.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1456476051-15121-1-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Several commits have been changing the generator, but not updating
the docs to match:
- The implicit tag member is named "type", not "kind". Screwed up in
commit 39a1815.
- Commit 9f08c8ec made list types lazy, and thereby dropped
UserDefOneList if nothing explicitly uses the list type.
- Commit 51e72bc1 switched the parameter order with 'name' occurring
earlier.
- Commit e65d89bf changed the layout of UserDefOneList.
- Prefer the term 'member' over 'field'.
- We now expose visit_type_FOO_members() for objects.
- etc.
Rework the examples to show slightly more output (we don't want to
show too much; that's what the testsuite is for), and regenerate the
output to match all recent changes. Also, rearrange output to show
.h files before .c (understanding the interface first often makes
the implementation easier to follow).
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1457021813-10704-5-git-send-email-eblake@redhat.com>
|
|
This property identifies events that trace vCPU-specific information.
It adds a "CPUState*" argument to events with the property, identifying
the vCPU raising the event. TCG translation events also have a
"TCGv_env" implicit argument that is later used as the "CPUState*"
argument at execution time.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 145641861797.30295.6991314023181842105.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The simple tracing backend has supported strings for more than three years
(62bab73213ba885426a781eb2741670b9f3cae36).
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id: 1454976185-30095-1-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
* Asynchronous dump-guest-memory from Peter
* improved logging with -D -daemonize from Dimitris
* more address_space_* optimization from Gonglei
* TCG xsave/xrstor thinko fix
* chardev bugfix and documentation patch
# gpg: Signature made Thu 25 Feb 2016 15:12:27 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
target-i386: fix confusion in xcr0 bit position vs. mask
chardev: Properly initialize ChardevCommon components
memory: Remove unreachable return statement
memory: optimize qemu_get_ram_ptr and qemu_ram_ptr_length
exec: store RAMBlock pointer into memory region
log: Redirect stderr to logfile if deamonized
dump-guest-memory: add qmp event DUMP_COMPLETED
Dump: add hmp command "info dump"
Dump: add qmp command "query-dump"
DumpState: adding total_size and written_size fields
dump-guest-memory: add "detach" support
dump-guest-memory: disable dump when in INMIGRATE state
dump-guest-memory: introduce dump_process() helper function.
dump-guest-memory: add dump_in_progress() helper function
dump-guest-memory: using static DumpState, add DumpStatus
dump-guest-memory: add "detach" flag for QMP/HMP interfaces.
dump-guest-memory: cleanup: removing dump_{error|cleanup}().
scripts/kvm/kvm_stat: Fix missing right parantheses and ".format(...)"
qemu-options.hx: Improve documentation of chardev multiplexing mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
