Age | Commit message (Collapse) | Author |
|
'remotes/amarkovic/tags/mips-queue-january-25-2019' into staging
MIPS queue for January 25, 2019
# gpg: Signature made Fri 25 Jan 2019 13:25:57 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-january-25-2019:
docs/qemu-cpu-models: Add MIPS/nanoMIPS QEMU supported CPU models
qemu-doc: Add nanoMIPS ISA information
tests: tcg: mips: Remove old directories
tests: tcg: mips: Add two new Makefiles
tests: tcg: mips: Move source files to new locations
MAINTAINERS: Update MIPS sections
target/mips: Add I6500 core configuration
target/mips: nanoMIPS: Fix branch handling
disas: nanoMIPS: Amend DSP instructions related comments
target/mips: Extend gen_scwp() functionality to support EVA
target/mips: Correct the second argument type of cpu_supports_isa()
target/mips: nanoMIPS: Rename macros for extracting 3-bit-coded GPR numbers
target/mips: nanoMIPS: Remove an unused macro
target/mips: nanoMIPS: Remove duplicate macro definitions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add list of supported and preferred CPU models for MIPS32, MIPS64
and nanoMIPS hosts.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
|
|
The qapi_event_send_FOO() functions emit events like this:
QMPEventFuncEmit emit;
emit = qmp_event_get_func_emit();
if (!emit) {
return;
}
qmp = qmp_event_build_dict("FOO");
[put event arguments into @qmp...]
emit(QAPI_EVENT_FOO, qmp);
The value of qmp_event_get_func_emit() depends only on the program:
* In qemu-system-FOO, it's always monitor_qapi_event_queue.
* In tests/test-qmp-event, it's always event_test_emit.
* In all other programs, it's always null.
This is exactly the kind of dependence the linker is supposed to
resolve; we don't actually need an indirection.
Note that things would fall apart if we linked more than one QAPI
schema into a single program: each set of qapi_event_send_FOO() uses
its own event enumeration, yet they share a single emit function.
Which takes the event enumeration as an argument. Which one if
there's more than one?
More seriously: how does this work even now? qemu-system-FOO wants
QAPIEvent, and passes a function taking that to
qmp_event_set_func_emit(). test-qmp-event wants test_QAPIEvent, and
passes a function taking that to qmp_event_set_func_emit().
It works by type trickery, of course:
typedef void (*QMPEventFuncEmit)(unsigned event, QDict *dict);
void qmp_event_set_func_emit(QMPEventFuncEmit emit);
QMPEventFuncEmit qmp_event_get_func_emit(void);
We use unsigned instead of the enumeration type. Relies on both
enumerations boiling down to unsigned, which happens to be true for
the compilers we use.
Clean this up as follows:
* Generate qapi_event_send_FOO() that call PREFIX_qapi_event_emit()
instead of the value of qmp_event_set_func_emit().
* Generate a prototype for PREFIX_qapi_event_emit() into
qapi-events.h.
* PREFIX_ is empty for qapi/qapi-schema.json, and test_ for
tests/qapi-schema/qapi-schema-test.json. It's qga_ for
qga/qapi-schema.json, and doc-good- for
tests/qapi-schema/doc-good.json, but those don't define any events.
* Rename monitor_qapi_event_queue() to qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
qemu-system-FOO.
* Rename event_test_emit() to test_qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
tests/test-qmp-event.
* Add a qapi_event_emit() that does nothing to stubs/monitor.c. This
takes care of all other programs that link code emitting QMP events.
* Drop qmp_event_set_func_emit(), qmp_event_get_func_emit().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181218182234.28876-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Commit message typos fixed]
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181218182234.28876-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
staging
RDMA queue
* Clang compilation fix
* Coverity fix
* Various fixes for the pvrdma device
# gpg: Signature made Sat 19 Jan 2019 09:13:53 GMT
# gpg: using RSA key 36D4C0F0CF2FE46D
# gpg: Good signature from "Marcel Apfelbaum <marcel.apfelbaum@zoho.com>"
# gpg: aka "Marcel Apfelbaum <marcel@redhat.com>"
# gpg: aka "Marcel Apfelbaum <marcel.apfelbaum@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B1C6 3A57 F92E 08F2 640F 31F5 36D4 C0F0 CF2F E46D
* remotes/marcel/tags/rdma-pull-request:
contrib/rdmacm-mux: fix clang compilation
hw/rdma: modify struct initialization
contrib/rdmacm-mux: remove Wno-format-truncation flag
hw: rdma: fix an off-by-one issue
hw/rdma: Verify that ptr is not NULL before freeing
hw/pvrdma: Make function pvrdma_qp_send/recv return void.
hw/pvrdma: Post CQE when receive invalid gid index
hw/rdma: Delete unused struct member
hw/pvrdma: Remove max-sge command-line param
docs/pvrdma: Update rdmacm-mux documentation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In some cases it may be helpful to modify state before saving it for
migration, and then modify the state back after it has been saved. The
existing pre_save function provides half of this functionality. This
patch adds a post_save function to provide the second half.
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20181211151945.29137-2-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This parameter has no effect, fix it.
The function init_dev_caps sets the front-end's max-sge to MAX_SGE. Then
it checks backend's max-sge and adjust it accordingly (we can't send
more than what the device supports).
On send and recv we need to make sure the num_sge in the WQE does not
exceeds the backend device capability.
This check is done in pvrdma level so check on rdma level is deleted.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20190109194123.3468-1-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
|
|
Before running the rdmacm-mux need to make sure that both the ib_cm
and rdma_cm kernel modules are unloaded.
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Message-Id: <20190109132829.19164-1-kamalheib1@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
|
|
The interface is described in the "TCG Platform Reset Attack
Mitigation Specification", chapter 6 "ACPI _DSM Function". According
to Laszlo, it's not so easy to implement in OVMF, he suggested to do
it in qemu instead.
See specification documentation for more details, and next commit for
memory clear on reset handling.
The underlying TCG specification is accessible from the following
page.
https://trustedcomputinggroup.org/resource/pc-client-work-group-platform-reset-attack-mitigation-specification-version-1-0/
This patch implements version 1.0.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The TPM Physical Presence interface consists of an ACPI part, a shared
memory part, and code in the firmware. Users can send messages to the
firmware by writing a code into the shared memory through invoking the
ACPI code. When a reboot happens, the firmware looks for the code and
acts on it by sending sequences of commands to the TPM.
This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't
assume that SMIs are necessary to use. It uses a similar datastructure for
the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use
of it. I extended the shared memory data structure with an array of 256
bytes, one for each code that could be implemented. The array contains
flags describing the individual codes. This decouples the ACPI implementation
from the firmware implementation.
The underlying TCG specification is accessible from the following page.
https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/
This patch implements version 1.30.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André - ACPI code improvements and windows fixes ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To avoid having to hard code the base address of the PPI virtual
memory device we introduce a fw_cfg file etc/tpm/config that holds the
base address of the PPI device, the version of the PPI interface and
the version of the attached TPM.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André: renamed to etc/tpm/config, made it static, document it ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
It's been marked as deprecated in QEMU v2.6.0 already, so really nobody
should use the legacy "ivshmem" device anymore (but use ivshmem-plain or
ivshmem-doorbell instead). Time to remove the deprecated device now.
Belatedly also update a mention of the deprecated "ivshmem" in the file
docs/specs/ivshmem-spec.txt to "ivshmem-doorbell". Missed in commit
5400c02b90b ("ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
It can be useful to figure out which NBD protocol features are
exposed by a server, as well as what features a client will
take advantage of if available, for a given qemu release. It's
not always precise to base features on version numbers (thanks
to downstream backports), but any documentation is better than
making users search through git logs themselves.
This patch originally stemmed from a request to document that
pristine 3.0 has a known bug where NBD_OPT_LIST_META_CONTEXT
with 0 queries forgot to advertise an available
"qemu:dirty-bitmap" context, but documenting bugs like this (or
the fact that 3.0 also botched NBD_CMD_CACHE) gets to be too
much details, especially since buggy releases will be less
likely connection targets over time. Instead, I chose to just
remind users to check stable release branches.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181215135324.152629-3-eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
Interface with the device is changed with the addition of support for
MAD packets.
Adjust documentation accordingly.
While there fix a minor mistake which may lead to think that there is a
relation between using RXE on host and the compatibility with bare-metal
peers.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181128153423.11916-1-cota@braap.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
staging
miscellaneous patches:
* checkpatch.pl: Enforce multiline comment syntax
* Rename cpu_physical_memory_write_rom() to address_space_write_rom()
* disas, monitor, elf_ops: Use address_space_read() to read memory
* Remove load_image() in favour of load_image_size()
* Fix some minor memory leaks in arm boards/devices
* virt: fix broken indentation
# gpg: Signature made Fri 14 Dec 2018 14:41:20 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-misc-20181214: (22 commits)
virt: Fix broken indentation
target/arm: Create timers in realize, not init
tests/test-arm-mptimer: Don't leak string memory
hw/sd/sdhci: Don't leak memory region in sdhci_sysbus_realize()
hw/arm/mps2-tz.c: Free mscname string in make_dma()
target/arm: Free name string in ARMCPRegInfo hashtable entries
include/hw/loader.h: Document load_image_size()
hw/core/loader.c: Remove load_image()
device_tree.c: Don't use load_image()
hw/block/tc58128.c: Don't use load_image()
hw/i386/multiboot.c: Don't use load_image()
hw/i386/pc.c: Don't use load_image()
hw/pci/pci.c: Don't use load_image()
hw/smbios/smbios.c: Don't use load_image()
hw/ppc/ppc405_boards: Don't use load_image()
hw/ppc/mac_newworld, mac_oldworld: Don't use load_image()
elf_ops.h: Use address_space_write() to write memory
monitor: Use address_space_read() to read memory
disas.c: Use address_space_read() to read memory
Rename cpu_physical_memory_write_rom() to address_space_write_rom()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The API of cpu_physical_memory_write_rom() is odd, because it
takes an AddressSpace, unlike all the other cpu_physical_memory_*
access functions. Rename it to address_space_write_rom(), and
bring its API into line with address_space_write().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20181122133507.30950-3-peter.maydell@linaro.org
|
|
Add 'if' key to alternate members:
{ 'alternate': 'TestIfAlternate', 'data':
{ 'alt': { 'type': 'TestStruct', 'if': 'COND' } } }
Generated code is not changed by this patch but with "qapi: add #if
conditions to generated code".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-17-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Add 'if' key to union members:
{ 'union': 'TestIfUnion', 'data':
'mem': { 'type': 'str', 'if': 'COND'} }
The generated code remains unconditional for now. Later patches
generate the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-16-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Note that union discriminators may not have 'if' conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-14-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-15-marcandre.lureau@redhat.com>
[Patches squashed, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
QAPISchemaMember gains .ifcond for enum members: inherited classes,
such as QAPISchemaObjectTypeMember, will thus have an ifcond member
after this (those different types will also use the .ifcond to store
the condition and generate conditional code in the following patches).
The generated code remains unconditional for now. Later patches
generate the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
RFC8259 obsoletes RFC7159. Fix a couple of URLs to point to the
newer version.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181203175702.128701-1-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
When a QMP client sends in-band commands more quickly that we can
process them, we can either queue them without limit (QUEUE), drop
commands when the queue is full (DROP), or suspend receiving commands
when the queue is full (SUSPEND). None of them is ideal:
* QUEUE lets a misbehaving client make QEMU eat memory without bounds.
Not such a hot idea.
* With DROP, the client has to cope with dropped in-band commands. To
inform the client, we send a COMMAND_DROPPED event then. The event is
flawed by design in two ways: it's ambiguous (see commit d621cfe0a17),
and it brings back the "eat memory without bounds" problem.
* With SUSPEND, the client has to manage the flow of in-band commands to
keep the monitor available for out-of-band commands.
We currently DROP. Switch to SUSPEND.
Managing the flow of in-band commands to keep the monitor available for
out-of-band commands isn't really hard: just count the number of
"outstanding" in-band commands (commands sent minus replies received),
and if it exceeds the limit, hold back additional ones until it drops
below the limit again.
Note that we need to be careful pairing the suspend with a resume, or
else the monitor will hang, possibly forever. And here since we need to
make sure both:
(1) popping request from the req queue, and
(2) reading length of the req queue
will be in the same critical section, we let the pop function take the
corresponding queue lock when there is a request, then we release the
lock from the caller.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-2-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20181030123526.26415-4-kchamart@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Although off_t permits up to 63 bits (8EB) of file offsets, in
practice, we're going to hit other limits first. Document some
of those limits in the qcow2 spec (some are inherent, others are
implementation choices of qemu), and how choice of cluster size
can influence some of the limits.
While we cannot map any uncompressed virtual cluster to any
address higher than 64 PB (56 bits) (due to the current L1/L2
field encoding stopping at bit 55), qemu's cap of 8M for the
refcount table can still access larger host addresses for some
combinations of large clusters and small refcount_order. For
comparison, ext4 with 4k blocks caps files at 16PB.
Another interesting limit: for compressed clusters, the L2 layout
requires an ever-smaller maximum host offset as cluster size gets
larger, down to a 512 TB maximum with 2M clusters. In particular,
note that with a cluster size of 8k or smaller, the L2 entry for
a compressed cluster could technically point beyond the 64PB mark,
but when you consider that with 8k clusters and refcount_order = 0,
you cannot access beyond 512T without exceeding qemu's limit of an
8M cap on the refcount table, it is unlikely that any image in the
wild has attempted to do so. To be safe, let's document that bits
beyond 55 in a compressed cluster must be 0.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
* icount fix (Clement)
* dumping fixes for non-volatile memory (Marc-André, myself)
* x86 emulation fix (Rudolf)
* recent Hyper-V CPUID flag (Vitaly)
* Q35 doc fix (Daniel)
* lsi fix (Prasad)
* SCSI block limits emulation fixes (myself)
* qemu_thread_atexit rework (Peter)
* ivshmem memory leak fix (Igor)
# gpg: Signature made Tue 06 Nov 2018 21:34:30 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
util/qemu-thread-posix: Fix qemu_thread_atexit* for OSX
include/qemu/thread.h: Document qemu_thread_atexit* API
scsi-generic: do not do VPD emulation for sense other than ILLEGAL_REQUEST
scsi-generic: avoid invalid access to struct when emulating block limits
scsi-generic: avoid out-of-bounds access to VPD page list
scsi-generic: keep VPD page list sorted
lsi53c895a: check message length value is valid
scripts/dump-guest-memory: Synchronize with guest_phys_blocks_region_add
memory-mapping: skip non-volatile memory regions in GuestPhysBlockList
nvdimm: set non-volatile on the memory region
memory: learn about non-volatile memory region
target/i386: Clear RF on SYSCALL instruction
MAINTAINERS: remove or downgrade myself to reviewer from some subsystems
ivshmem: fix memory backend leak
i386: clarify that the Q35 machine type implements a P35 chipset
x86: hv_evmcs CPU flag support
icount: fix deadlock when all cpus are sleeping
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add a new flag to mark memory region that are used as non-volatile, by
NVDIMM for example. That bit is propagated down to the flat view, and
reflected in HMP info mtree with a "nv-" prefix on the memory type.
This way, guest_phys_blocks_region_add() can skip the NV memory
regions for dumps and TCG memory clear in a following patch.
Cc: dgilbert@redhat.com
Cc: imammedo@redhat.com
Cc: pbonzini@redhat.com
Cc: guangrong.xiao@linux.intel.com
Cc: mst@redhat.com
Cc: xiaoguangrong.eric@gmail.com
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181003114454.5662-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add memory bar to pci-testdev. Size is configurable using the membar
property. Setting the size to zero (default) turns it off. Can be used
to check whether guests handle large pci bars correctly.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
'remotes/dgilbert/tags/pull-migration-20181031a' into staging
Minor migration fixes 2018-10-31
# gpg: Signature made Wed 31 Oct 2018 16:55:40 GMT
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20181031a:
migration: avoid segmentfault when take a snapshot of a VM which being migrated
qapi: Fix COLOStatus and query-colo-status since version
COLO: Fix Colo doc secondeary should be secondary
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2018-10-30
* Makefile rule for running acceptance tests
(make check-acceptance) (Cleber Rosa)
* Make iotests compatible with Python 3
(Max Reitz)
* device-crash-test whitelist update (Thomas Huth)
* Misc cleanups (Cleber Rosa)
# gpg: Signature made Wed 31 Oct 2018 00:28:39 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
scripts/qemu.py: use a more consistent docstring style
scripts/decodetree.py: fix reference to attributes
Travis support for the acceptance tests
Acceptance tests: add make rule for running them
Bootstrap Python venv for tests
iotests: Unify log outputs between Python 2 and 3
iotests: Modify imports for Python 3
iotests: 'new' module replacement in 169
iotests: Explicitly bequeath FDs in Python
iotests: Different iterator behavior in Python 3
iotests: Use // for Python integer division
iotests: Use Python byte strings where appropriate
iotests: Flush in iotests.py's QemuIoInteractive
iotests: Make nbd-fault-injector flush
scripts/device-crash-test: Remove devices that are not user_creatable anymore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/stefanberger/tags/pull-tpm-2018-10-29-2' into staging
Merge tpm 2018/10/29 v2
# gpg: Signature made Tue 30 Oct 2018 21:40:24 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-10-29-2:
tpm: Zero-init structure to avoid uninitialized variables in valgrind log
MAINTAINERS: Change my email address to the new domain
docs: tpm: Mention implemented TPM CRB interface emulation and specs
tests/tpm: Display if swtpm is not found or --tpm2 not supported
tests/tpm: fix tpm_util_swtpm_has_tpm2()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Guang Wang <wang.guang55@zte.com.cn>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The acceptance (aka functional, aka Avocado-based) tests are
Python files located in "tests/acceptance" that need to be run
with the Avocado libs and test runner.
Let's provide a convenient way for QEMU developers to run them,
by making use of the tests-venv with the required setup.
Also, while the Avocado test runner will take care of creating a
location to save test results to, it was understood that it's better
if the results are kept within the build tree.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Add a few sentences about the implemented emulation of the TPM CRB
interface and its specification.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
I spent way too much time trying to figure out why the emulated NVDIMM
was missing under Linux. In an effort to help others who might be looking
for these kinds of things in the future, include a hint.
Signed-off-by: Kees Cook <keescook@chromium.org>
Message-id: 20181018201351.GA25286@beast
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The line immediate following a ".. code::" block is considered
to contains arguments to the "code directive". The lack of a
new line gives me during at parse time:
testing.rst:63: (ERROR/3) Error in "code" directive:
maximum 1 argument(s) allowed, 3 supplied.
.. code::
make check-unit V=1
testing.rst:120: (ERROR/3) Error in "code" directive:
maximum 1 argument(s) allowed, 3 supplied.
.. code::
make check-qtest V=1
Let's add the missing newlines, both for consistency and to
avoid the parsing errors.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20181004161852.11673-6-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
This diagram make user better understand COLO.
Suggested by Markus Armbruster.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Commit 31d2dda ("build-system: remove per-test GCOV reporting", 2018-06-20)
removed users of the variables, since those uses can be replaced by a simple
overall report produced by gcovr. However, the variables were never removed.
Do it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Fixed up contextual conflicts with the patch from Eric]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
This patch provides documentation describing the AP architecture and
design concepts behind the virtualization of AP devices. It also
includes an example of how to configure AP devices for exclusive
use of KVM guests.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181010170309.12045-7-akrowiak@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
When we added the _with_attrs accessors we forgot to mention
them in the documentation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180824170422.5783-4-peter.maydell@linaro.org>
Based-on: <20180802174042.29234-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that all the users of old_mmio MemoryRegion accessors
have been converted, we can remove the core code support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180824170422.5783-2-peter.maydell@linaro.org>
Based-on: <20180802174042.29234-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Block layer patches:
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
# gpg: Signature made Mon 01 Oct 2018 18:17:35 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (23 commits)
tests/test-bdrv-drain: Fix too late qemu_event_reset()
test-replication: Lock AioContext around blk_unref()
qcow2: Fix cache-clean-interval documentation
block-backend: Set werror/rerror defaults in blk_new()
qcow2: Explicit number replaced by a constant
qcow2: Set the default cache-clean-interval to 10 minutes
qcow2: Resize the cache upon image resizing
qcow2: Increase the default upper limit on the L2 cache size
qcow2: Assign the L2 cache relatively to the image size
qcow2: Avoid duplication in setting the refcount cache size
qcow2: Make sizes more humanly readable
include: Add a lookup table of sizes
qcow2: Options' documentation fixes
block: Allow changing 'detect-zeroes' on reopen
block: Allow changing 'discard' on reopen
file-posix: Forbid trying to change unsupported options during reopen
block: Forbid trying to change unsupported options during reopen
block: Allow child references on reopen
block: Don't look for child references in append_open_options()
block: Remove child references from bs->{options,explicit_options}
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fixing cache-clean-interval documentation following the recent change to
a default of 600 seconds on supported plarforms (only Linux currently).
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The default cache-clean-interval is set to 10 minutes, in order to lower
the overhead of the qcow2 caches (before the default was 0, i.e.
disabled).
* For non-Linux platforms the default is kept at 0, because
cache-clean-interval is not supported there yet.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The upper limit on the L2 cache size is increased from 1 MB to 32 MB
on Linux platforms, and to 8 MB on other platforms (this difference is
caused by the ability to set intervals for cache cleaning on Linux
platforms only).
This is done in order to allow default full coverage with the L2 cache
for images of up to 256 GB in size (was 8 GB). Note, that only the
needed amount to cover the full image is allocated. The value which is
changed here is just the upper limit on the L2 cache size, beyond which
it will not grow, even if the size of the image will require it to.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.
Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.
Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
into staging
vga: add edid support, qxl bugfixes.
# gpg: Signature made Thu 27 Sep 2018 08:12:32 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/vga-20180927-pull-request:
qxl: support mono cursors with inverted colors
qxl: use guest_monitor_config for local renderer.
display/stdvga: add edid support.
display/edid: add DEFINE_EDID_PROPERTIES
display/edid: add region helper.
display/edid: add qemu_edid_size()
display/edid: add edid generator to qemu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This patch adds edid support to the qemu stdvga. It is turned off by
default and can be enabled with the new edid property. The patch also
adds xres and yres properties to specify the video mode you want the
guest use. Works only with edid enabled and updated guest driver.
The mmio bar of the stdvga has some unused address space at the start.
It was reserved just in case it'll be needed for virtio, but it turned
out to not be needed for that. So let's use that region to place the
EDID data block there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-6-kraxel@redhat.com
|