aboutsummaryrefslogtreecommitdiff
path: root/docs/system
AgeCommit message (Collapse)Author
2021-03-08docs/system/arm/mps2.rst: Document the new mps3-an524 boardPeter Maydell
Add brief documentation of the new mps3-an524 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-24-peter.maydell@linaro.org
2021-03-06qemu-option: do not suggest using the delay optionPaolo Bonzini
The "delay" option was a hack that was introduced to allow writing "nodelay". We are adding a "nodelay" option to be used as "nodelay=on", so recommend it instead of "delay". This is quite ugly, but a proper deprecation of "delay" cannot be done if QEMU starts suggesting it. Since it's the only case I opted for this very much ad-hoc patch. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-06KVM: x86: deprecate -M kernel-irqchip=off except for -M isapcPaolo Bonzini
The userspace local APIC is basically untested and does not support many features such as TSC deadline timer, x2APIC or PV spinlocks. On the other hand, the PIT and IOAPIC are okay as they are not tied to the processor and are tested with -M kernel-irqchip=split. Therefore, deprecate the local APIC and, with it, limit -M kernel-irqchip=off to the ISA PC machine type, which does not have a local APIC at all. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-05hw/arm: Add npcm7xx emc modelDoug Evans
This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210218212453.831406-3-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-04docs/system: riscv: Add documentation for sifive_u machineBin Meng
This adds detailed documentation for RISC-V `sifive_u` machine, including the following information: - Supported devices - Hardware configuration information - Boot options - Machine-specific options - Running Linux kernel - Running VxWorks kernel - Running U-Boot, and with an alternate configuration Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 20210126060007.12904-10-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04docs/system: Add RISC-V documentationBin Meng
Add RISC-V system emulator documentation for generic information. `Board-specific documentation` and `RISC-V CPU features` are only a placeholder and will be added in the future. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210126060007.12904-9-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04docs/system: Sort targets in alphabetical orderBin Meng
Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210126060007.12904-8-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-02-25vl: deprecate -writeconfigPaolo Bonzini
The functionality of -writeconfig is limited and the code does not even try to detect cases where it prints incorrect syntax (for example if values have a quote in them, since qemu_config_parse does not support any kind of escaping) so remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-25docs: update to show preferred boolean syntax for -cpuDaniel P. Berrangé
The preferred syntax is to use "foo=on|off", rather than a bare "+foo" or "-foo" Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210216191027.595031-10-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-25docs: update to show preferred boolean syntax for -vncDaniel P. Berrangé
The preferred syntax is to use "foo=on|off", rather than a bare "foo" or "nofoo". The on|off syntax has been supported since -vnc switched to use QemuOpts in commit 4db14629c38611061fc19ec6927405923de84f08 Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210216191027.595031-9-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-25docs: update to show preferred boolean syntax for -chardevDaniel P. Berrangé
The preferred syntax is to use "foo=on|off", rather than a bare "foo" or "nofoo". Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210216191027.595031-8-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-16hw/i2c: Implement NPCM7XX SMBus Module Single ModeHao Wu
This commit implements the single-byte mode of the SMBus. Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses compliant with SMBus and I2C protocol. This patch implements the single-byte mode of the SMBus. In this mode, the user sends or receives a byte each time. The SMBus device transmits it to the underlying i2c device and sends an interrupt back to the QEMU guest. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-2-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-09multi-process: add configure and usage informationElena Ufimtseva
Adds documentation explaining the command-line arguments needed to use multi-process. Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 49f757a84e5dd6fae14b22544897d1124c5fdbad.1611938319.git.jag.raman@oracle.com [Move orphan docs/multi-process.rst document into docs/system/ and add it to index.rst to prevent Sphinx "document isn't included in any toctree" error. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-08Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-gdbstub-docs-080221-1' into staging Testing, gdbstub and doc tweaks: - increase timeout on replay kernel acceptance test - fixes for binfmt_misc docker images - better gdb version detection - don't silently skip gdb tests - fix for gdbstub auxv handling - cleaner handling of check-tcg on tcg disabled builds - expand vexpress/versitile docs with examples # gpg: Signature made Mon 08 Feb 2021 11:12:03 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-gdbstub-docs-080221-1: docs/system: document an example booting the versatilepb machine docs/system: document an example vexpress-a15 invocation tests/Makefile.include: don't use TARGET_DIRS for check-tcg scripts/mtest2make.py: export all-%s-targets variable and use it tests/tcg: Replace /bin/true by true (required on macOS) gdbstub: Fix handle_query_xfer_auxv tests/tcg: don't silently skip the gdb tests configure: bump the minimum gdb version for check-tcg to 9.1 configure: make version_ge more tolerant of shady version input tests/docker: add a docker-exec-copy-test tests/docker: alias docker-help target for consistency tests/docker: preserve original name when copying libs tests/docker: make _copy_with_mkdir accept missing files tests/docker: Fix typo in help message tests/docker: Fix _get_so_libs() for docker-binfmt-image tests/acceptance: Increase the timeout in the replay tests Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-08docs/system: document an example booting the versatilepb machineAlex Bennée
There is a bit more out there including Aurelien's excellent write up and older Debian images here: https://www.aurel32.net/info/debian_arm_qemu.php https://people.debian.org/~aurel32/qemu/armel/ However the web is transitory and git is forever so lets add something to the fine manual. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <20210202134001.25738-16-alex.bennee@linaro.org>
2021-02-08docs/system: document an example vexpress-a15 invocationAlex Bennée
The wiki and the web are curiously absent of the right runes to boot a vexpress model so I had to work from first principles to work it out. Use the more modern -drive notation so alternative backends can be used (unlike the hardwired -sd mode). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Message-Id: <20210202134001.25738-15-alex.bennee@linaro.org>
2021-02-08s390: Recognize confidential-guest-support optionDavid Gibson
At least some s390 cpu models support "Protected Virtualization" (PV), a mechanism to protect guests from eavesdropping by a compromised hypervisor. This is similar in function to other mechanisms like AMD's SEV and POWER's PEF, which are controlled by the "confidential-guest-support" machine option. s390 is a slightly special case, because we already supported PV, simply by using a CPU model with the required feature (S390_FEAT_UNPACK). To integrate this with the option used by other platforms, we implement the following compromise: - When the confidential-guest-support option is set, s390 will recognize it, verify that the CPU can support PV (failing if not) and set virtio default options necessary for encrypted or protected guests, as on other platforms. i.e. if confidential-guest-support is set, we will either create a guest capable of entering PV mode, or fail outright. - If confidential-guest-support is not set, guests might still be able to enter PV mode, if the CPU has the right model. This may be a little surprising, but shouldn't actually be harmful. To start a guest supporting Protected Virtualization using the new option use the command line arguments: -object s390-pv-guest,id=pv0 -machine confidential-guest-support=pv0 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-02-05hw/i386: Remove the deprecated pc-1.x machine typesThomas Huth
They have been deprecated since QEMU v5.0, time to remove them now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210203171832.483176-2-thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-01-29Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging * Replace --enable/disable-git-update with --with-git-submodules to allow improved control over use of git submodules * Deprecate the -enable-fips option * Ensure docs use prefer format for bool options * Clarify platform support rules * Misc fixes to keymap conversions * Fix misc problems on macOS # gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange-gitlab/tags/misc-fixes-pull-request: tests: Replace deprecated ASN1 code tests: Fix runtime error in test-authz-pam ui: update keycodemapdb submodule commit crypto: Add spaces around operator configure: replace --enable/disable-git-update with --with-git-submodules docs: fix missing backslash in certtool shell example docs: simplify and clarify the platform support rules Prefer 'on' | 'off' over 'yes' | 'no' for bool options os: deprecate the -enable-fips option and QEMU's FIPS enforcement crypto: Fix memory leaks in set_loaded for tls-* crypto: Forbid broken unloading of secrets crypto: Move USER_CREATABLE to secret_common base class crypto: Fix some code style problems, add spaces around operator Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-29docs: fix missing backslash in certtool shell exampleDaniel P. Berrangé
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-01-29docs: simplify and clarify the platform support rulesDaniel P. Berrangé
The distinction between short life and long life Linux distributions turned out to be redundant. They can both be covered in a simple way by noting support will target the current release, and the previous release for a period of two years or until its EOL. This rule can also apply to the other UNIX based distros, leaving only Windows needing a different set of rules. This also clarifies that Debian LTS is out of scope, because the LTS support is provided by a separate group from the main Debian maintainer team. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-01-29Prefer 'on' | 'off' over 'yes' | 'no' for bool optionsDaniel P. Berrangé
Update some docs and test cases to use 'on' | 'off' as the preferred value for bool options. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-01-29os: deprecate the -enable-fips option and QEMU's FIPS enforcementDaniel P. Berrangé
The -enable-fips option was added a long time ago to prevent the use of single DES when VNC when FIPS mode is enabled. It should never have been added, because apps are supposed to unconditionally honour FIPS mode based on the '/proc/sys/crypto/fips_enabled' file contents. In addition there is more to achieving FIPS compliance than merely blocking use of certain algorithms. Those algorithms which are used need to perform self-tests at runtime. QEMU's built-in cryptography provider has no support for self-tests, and neither does the nettle library. If QEMU is required to be used in a FIPS enabled host, then it must be built with the libgcrypt library enabled, which will unconditionally enforce FIPS compliance in any algorithm usage. Thus there is no need to keep either the -enable-fips option in QEMU, or QEMU's internal FIPS checking methods. Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-01-29arm-virt: add secure pl061 for reset/power downMaxim Uvarov
Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-23qemu-option: warn for short-form boolean optionsPaolo Bonzini
Options such as "server" or "nowait", that are commonly found in -chardev, are sugar for "server=on" and "wait=off". This is quite surprising and also does not have any notion of typing attached. It is even possible to do "-device e1000,noid" and get a device with "id=off". Deprecate it and print a warning when it is encountered. In general, this short form for boolean options only seems to be in wide use for -chardev and -spice. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-23qmp: remove deprecated "change" commandPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210120144235.345983-3-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-23hmp: remove "change vnc TARGET" commandPaolo Bonzini
The HMP command \"change vnc TARGET\" is messy: - it takes an ugly shortcut to determine if the option has an "id", with incorrect results if "id=" is not preceded by an unescaped comma. - it deletes the existing QemuOpts and does not try to rollback if the parsing fails (which is not causing problems, but only due to how VNC options are parsed) - because it uses the same parsing function as "-vnc", it forces the latter to not support "-vnc help". On top of this, it uses a deprecated QMP command, thus getting in the way of removing the QMP command. Since the usecase for the command is not clear, just remove it and send "change vnc password" directly to the QMP "change-vnc-password" command. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210120144235.345983-2-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-19docs: Build and install all the docs in a single manualPeter Maydell
When we first converted our documentation to Sphinx, we split it into multiple manuals (system, interop, tools, etc), which are all built separately. The primary driver for this was wanting to be able to avoid shipping the 'devel' manual to end-users. However, this is working against the grain of the way Sphinx wants to be used and causes some annoyances: * Cross-references between documents become much harder or possibly impossible * There is no single index to the whole documentation * Within one manual there's no links or table-of-contents info that lets you easily navigate to the others * The devel manual doesn't get published on the QEMU website (it would be nice to able to refer to it there) Merely hiding our developer documentation from end users seems like it's not enough benefit for these costs. Combine all the documentation into a single manual (the same way that the readthedocs site builds it) and install the whole thing. The previous manual divisions remain as the new top level sections in the manual. * The per-manual conf.py files are no longer needed * The man_pages[] specifications previously in each per-manual conf.py move to the top level conf.py * docs/meson.build logic is simplified as we now only need to run Sphinx once for the HTML and then once for the manpages5B * The old index.html.in that produced the top-level page with links to each manual is no longer needed Unfortunately this means that we now have to build the HTML documentation into docs/manual in the build tree rather than directly into docs/; otherwise it is too awkward to ensure we install only the built manual and not also the dependency info, stamp file, etc. The manual still ends up in the same place in the final installed directory, but anybody who was consulting documentation from within the build tree will have to adjust where they're looking. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210115154449.4801-1-peter.maydell@linaro.org
2021-01-19target/arm: Add cpu properties to control pauthRichard Henderson
The crypto overhead of emulating pauth can be significant for some workloads. Add two boolean properties that allows the feature to be turned off, on with the architected algorithm, or on with an implementation defined algorithm. We need two intermediate booleans to control the state while parsing properties lest we clobber ID_AA64ISAR1 into an invalid intermediate state. Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210111235740.462469-3-richard.henderson@linaro.org [PMM: fixed docs typo, tweaked text to clarify that the impdef algorithm is specific to QEMU] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-14docs/system: Remove deprecated 'fulong2e' machine aliasPhilippe Mathieu-Daudé
The 'fulong2e' machine alias has been marked as deprecated since QEMU v5.1 (commit c3a09ff68dd, the machine is renamed 'fuloong2e'). Time to remove it now. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Reviewed-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20210106184602.3771551-1-f4bug@amsat.org>
2021-01-12hw/misc: Add a PWM module for NPCM7XXHao Wu
The PWM module is part of NPCM7XX module. Each NPCM7XX module has two identical PWM modules. Each module contains 4 PWM entries. Each PWM has two outputs: frequency and duty_cycle. Both are computed using inputs from software side. This module does not model detail pulse signals since it is expensive. It also does not model interrupts and watchdogs that are dependant on the detail models. The interfaces for these are left in the module so that anyone in need for these functionalities can implement on their own. The user can read the duty cycle and frequency using qom-get command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-5-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-12hw/adc: Add an ADC module for NPCM7XXHao Wu
The ADC is part of NPCM7XX Module. Its behavior is controled by the ADC_CON register. It converts one of the eight analog inputs into a digital input and stores it in the ADC_DATA register when enabled. Users can alter input value by using qom-set QMP command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-4-wuhaotsh@google.com [PMM: Added missing hw/adc/trace.h file] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08docs/system: arm: Add sabrelite board descriptionBin Meng
This adds the target guide for SABRE Lite board, and documents how to boot a Linux kernel and U-Boot bootloader. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210106063504.10841-5-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-04docs/system: Update MIPS machine documentationHuacai Chen
Update MIPS machine documentation to add Loongson-3 based machine description. Signed-off-by: Huacai Chen <chenhuacai@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201221110538.3186646-6-chenhuacai@kernel.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-12-18block: introduce preallocate filterVladimir Sementsov-Ogievskiy
It's intended to be inserted between format and protocol nodes to preallocate additional space (expanding protocol file) on writes crossing EOF. It improves performance for file-systems with slow allocation. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20201021145859.11201-9-vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> [mreitz: Two comment fixes, and bumped the version from 5.2 to 6.0] Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-12-15Remove the deprecated -show-cursor optionThomas Huth
It has been marked as deprecated since QEMU v5.0, replaced by the corresponding parameter of the -display option. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201210155808.233895-5-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15Remove the deprecated -realtime optionThomas Huth
It has been marked as deprecated since QEMU v4.2, replaced by the -overcommit option. Time to remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201210155808.233895-4-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15docs/system: Move the list of removed features to a separate fileThomas Huth
Otherwise there is a chance that new deprecated features get added to the list of removed features at the end of the file by accident. It's way less confusing if the removed features reside in a separate file. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201210155808.233895-3-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15accel/tcg: Remove deprecated '-tb-size' optionPhilippe Mathieu-Daudé
The '-tb-size' option (replaced by '-accel tcg,tb-size') is deprecated since 5.0 (commit fe174132478). Remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201202112714.1223783-1-philmd@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201210155808.233895-2-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-14target/ppc: Remove "compat" property of server class POWER CPUsGreg Kurz
This property has been deprecated since QEMU 5.0 by commit 22062e54bb68. We only kept a legacy hack that internally converts "compat" into the official "max-cpu-compat" property of the pseries machine type. According to our deprecation policy, we could have removed it for QEMU 5.2 already. Do it now ; since ppc_cpu_parse_featurestr() now just calls the generic parent_parse_features handler, drop it as well. Users are supposed to use the "max-cpu-compat" property of the pseries machine type instead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20201201131103.897430-1-groug@kaod.org> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-11-23docs/system/pr-manager.rst: Fix minor docs nitsPeter Maydell
Fix a couple of nits in pr-manager.rst: * the title marker for the top level heading is overlength * stray capital 'R' in the middle of a sentence Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2020-11-23docs: Split qemu-pr-helper documentation into tools manualPeter Maydell
Split the documentation of the qemu-pr-helper binary into the tools manual, and give it a manpage like our other standalone executables. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2020-11-23docs: Move pr-manager.rst into the system manualPeter Maydell
Move the pr-manager documentation into the system manual. Some of it (the documentation of the pr-manager-helper tool) should be in tools, but we will split it up after moving it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2020-11-23docs: Move microvm.rst into the system manualPeter Maydell
Now that target-i386.rst has a place to list documentation of machines other than the 'pc' machine, we have a place we can move the microvm documentation to. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2020-11-23docs: Split out 'pc' machine model docs into their own filePeter Maydell
Currently target-i386.rst includes the documentation of the 'pc' machine model inline. Split it out into its own file, in a similar way to target-i386.rst; this gives us a place to put documentation of other i386 machine models, such as 'microvm'. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2020-11-23docs/system/virtio-pmem.rst: Fix minor style issuesPeter Maydell
The virtio-pmem documentation has some minor style issues we hadn't noticed since we weren't rendering it in our docs: * Sphinx doesn't complain about overlong title-underlining the way it complains about too-short underlining, but it looks odd; make the underlines of section headers the right length * Indent of paragraphs makes them render as blockquotes; remove the indent so they just render as normal text * Leading 'o' isn't rst markup, so it just renders as a literal "o"; reformat as a subsection heading instead * "QEMU" in the document title and section headings are a bit odd and unnecessary since this is the QEMU manual; delete or rephrase them * There's no need to specify what QEMU version the device first appeared in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
2020-11-23docs: Move virtio-pmem.rst into the system manualPeter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2020-11-23docs: Move cpu-hotplug.rst into the system manualPeter Maydell
The cpu-hotplug.rst documentation is currently orphan and not included in any manual; move it into the system manual. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2020-11-23docs: Move virtio-net-failover.rst into the system manualPeter Maydell
The virtio-net-failover documentation is currently orphan and not included in any manual; move it into the system manual, immediately following the general network emulation section. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2020-11-23docs/system/arm: Document the Sharp Zaurus SL-6000Philippe Mathieu-Daudé
List the 'tosa' machine with the XScale-based PDAs models. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201120173953.2539469-5-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:21:18 +0000