aboutsummaryrefslogtreecommitdiff
path: root/docs/system
AgeCommit message (Collapse)Author
2020-09-14docs/system/arm/mps2.rst: Make board list consistentPeter Maydell
Make the list of MPS2 boards consistent in the phrasing of each entry, use the correct casing of "Arm", and move the mps2-an511 entry so the list is in numeric order. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200903202048.15370-4-peter.maydell@linaro.org
2020-09-14hw/arm/mps2: New board model mps2-an500Peter Maydell
Implement a model of the MPS2 with the AN500 firmware. This is similar to the AN385, with the following differences: * Cortex-M7 CPU * PSRAM is at 0x6000_0000 * Ethernet is at 0xa000_0000 * No zbt_boot_ctrl remapping of the low 16K (but QEMU doesn't implement this anyway) * no "block RAM" at 0x01000000 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200903202048.15370-3-peter.maydell@linaro.org
2020-09-14hw/arm/mps2: New board model mps2-an386Peter Maydell
Implement a model of the MPS2 with the AN386 firmware. This is essentially identical to the AN385 firmware, but it has a Cortex-M4 rather than a Cortex-M3. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200903202048.15370-2-peter.maydell@linaro.org
2020-09-14target/arm: Remove KVM support for 32-bit Arm hostsPeter Maydell
We deprecated the support for KVM on 32-bit Arm hosts in time for release 5.0, which means that our deprecation policy allows us to drop it in release 5.2. Remove the code. To repeat the rationale from the deprecation note: the Linux kernel dropped support for 32-bit Arm KVM hosts in 5.7. Running 32-bit guests on a 64-bit Arm host remains supported. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200904154156.31943-2-peter.maydell@linaro.org
2020-09-10docs/system/deprecated: mark ppc64abi32-linux-user for deprecationAlex Bennée
It's buggy and we are not sure anyone uses it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200909112742.25730-6-alex.bennee@linaro.org>
2020-09-01Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Pull request trivial patches 20200901 # gpg: Signature made Tue 01 Sep 2020 15:08:59 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: (44 commits) docs/system: Fix grammar in documentation main-loop: Fix comment hw/display/vga:Remove redundant statement in vga_draw_graphic() hw/intc: fix default registers value in exynos4210_combiner_read() usb/bus: Remove dead assignment in usb_get_fw_dev_path() vfio/platform: Remove dead assignment in vfio_intp_interrupt() hw/net/virtio-net:Remove redundant statement in virtio_net_rsc_tcp_ctrl_check() hw/virtio/vhost-user:Remove dead assignment in scrub_shadow_regions() target/arm/translate-a64:Remove redundant statement in disas_simd_two_reg_misc_fp16() target/arm/translate-a64:Remove dead assignment in handle_scalar_simd_shli() hw/arm/omap1:Remove redundant statement in omap_clkdsp_read() hw/arm/virt-acpi-build:Remove dead assignment in build_madt() linux-user: Add strace support for printing OFD fcntl operations util/vfio-helpers: Unify trace-events size format hw/net/xilinx_axienet: Remove unused code hw/scsi/scsi-disk: Replace magic '512' value by BDRV_SECTOR_SIZE hw/ide/pci: Replace magic '512' value by BDRV_SECTOR_SIZE hw/ide/atapi: Replace magic '512' value by BDRV_SECTOR_SIZE hw/ide/ahci: Replace magic '512' value by BDRV_SECTOR_SIZE hw/ide/core: Trivial typo fix ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01docs/system: Fix grammar in documentationStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200827173051.31050-1-sw@weilnetz.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-01docs/system/target-avr: Improve the AVR docs and add to MAINTAINERSThomas Huth
The examples look nicer when using "::" code blocks. Also mention that "-d in_asm" only outputs instructions that have not been translated by the JIT layer yet. And while we're at it, also add the AVR doc file to the MAINTAINERS file. Signed-off-by: Thomas Huth <huth@tuxfamily.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Rolnik <mrolnik@gmail.com> Message-Id: <20200812155304.18016-1-huth@tuxfamily.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-31docs/system: Add U2F key to the USB devices examplesCésar Belley
Signed-off-by: César Belley <cesar.belley@lse.epita.fr> Message-id: 20200826114209.28821-9-cesar.belley@lse.epita.fr Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-27docs/system/s390x: Add a chapter about s390x boot devicesThomas Huth
Booting on s390x is a little bit different compared to other architectures. Let's add some information for people who are not yet used to this. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200806150507.12073-1-thuth@redhat.com> [CH: minor wording tweaks] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-08-24docs/system/arm: Document the Xilinx Versal Virt boardEdgar E. Iglesias
Document the Xilinx Versal Virt board. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200803164749.301971-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27docs/system/arm/virt: Document 'mte' machine optionPeter Maydell
Commit 6a0b7505f1fd6769c which added documentation of the virt board crossed in the post with commit 6f4e1405b91da0d0 which added a new 'mte' machine option. Update the docs to include the new option. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-07-20docs/system: Document the arm virt boardPeter Maydell
Document the arm 'virt' board, which has been undocumented for far too long given that it is the main recommended board type for arm guests. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200713175746.5936-5-peter.maydell@linaro.org
2020-07-20docs/system: Briefly document gumstix boardsPeter Maydell
Add skeletal documentation of the gumstix boards ('connex' and 'verdex'). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200713175746.5936-4-peter.maydell@linaro.org
2020-07-20docs/system: Briefly document collie boardPeter Maydell
Add skeletal documentation of the collie board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200713175746.5936-3-peter.maydell@linaro.org
2020-07-20docs/system: Briefly document canon-a1100 boardPeter Maydell
Add skeletal documentation of the canon-a1100 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200713175746.5936-2-peter.maydell@linaro.org
2020-07-18Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20200717' into stagingPeter Maydell
Fix typo in newly added documentation. # gpg: Signature made Fri 17 Jul 2020 14:54:20 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [marginal] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [marginal] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20200717: docs/s390x: fix vfio-ccw type Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-17Remove VXHS block deviceMarc-André Lureau
The vxhs code doesn't compile since v2.12.0. There's no point in fixing and then adding CI for a config that our users have demonstrated that they do not use; better to just remove it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200711065926.2204721-1-marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-17docs/s390x: fix vfio-ccw typeCornelia Huck
Fix the type name in the mdevctl example. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20200716145031.771476-1-cohuck@redhat.com>
2020-07-15Merge remote-tracking branch ↵Peter Maydell
'remotes/philmd-gitlab/tags/sdcard-CVE-2020-13253-pull-request' into staging Fix CVE-2020-13253 By using invalidated address, guest can do out-of-bounds accesses. These patches fix the issue by only allowing SD card image sizes power of 2, and not switching to SEND_DATA state when the address is invalid (out of range). This issue was found using QEMU fuzzing mode (using --enable-fuzzing, see docs/devel/fuzzing.txt) and reported by Alexander Bulekov. Reproducer: https://bugs.launchpad.net/qemu/+bug/1880822/comments/1 CI jobs results: . https://cirrus-ci.com/build/5157142548185088 . https://gitlab.com/philmd/qemu/-/pipelines/166381731 . https://travis-ci.org/github/philmd/qemu/builds/707956535 # gpg: Signature made Tue 14 Jul 2020 14:54:44 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/sdcard-CVE-2020-13253-pull-request: hw/sd/sdcard: Do not switch to ReceivingData if address is invalid hw/sd/sdcard: Update coding style to make checkpatch.pl happy hw/sd/sdcard: Do not allow invalid SD card sizes hw/sd/sdcard: Simplify realize() a bit hw/sd/sdcard: Restrict Class 6 commands to SCSD cards tests/acceptance/boot_linux: Expand SD card image to power of 2 tests/acceptance/boot_linux: Tag tests using a SD card with 'device:sd' docs/orangepi: Add instructions for resizing SD image to power of two MAINTAINERS: Cc qemu-block mailing list Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-14docs/orangepi: Add instructions for resizing SD image to power of twoNiek Linnenbank
SD cards need to have a size of a power of two. Update the Orange Pi machine documentation to include instructions for resizing downloaded images using the qemu-img command. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200712183708.15450-1-nieklinnenbank@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-14qemu-img: Deprecate use of -b without -FEric Blake
Creating an image that requires format probing of the backing image is potentially unsafe (we've had several CVEs over the years based on probes leaking information to the guest on a subsequent boot, although these days tools like libvirt are aware of the issue enough to prevent the worst effects). For example, if our probing algorithm ever changes, or if other tools like libvirt determine a different probe result than we do, then subsequent use of that backing file under a different format will present corrupted data to the guest. Fortunately, the worst effects occur only when the backing image is originally raw, and we at least prevent commit into a probed raw backing file that would change its probed type. Still, it is worth starting a deprecation clock so that future qemu-img can refuse to create backing chains that would rely on probing, to encourage clients to avoid unsafe practices. Most warnings are intentionally emitted from bdrv_img_create() in the block layer, but qemu-img convert uses bdrv_create() which cannot emit its own warning without causing spurious warnings on other code paths. In the end, all command-line image creation or backing file rewriting now performs a check. Furthermore, if we probe a backing file as non-raw, then it is safe to explicitly record that result (rather than relying on future probes); only where we probe a raw image do we care about further warnings to the user when using such an image (for example, commits into a probed-raw backing file are prevented), to help them improve their tooling. But whether or not we make the probe results explicit, we still warn the user to remind them to upgrade their workflow to supply -F always. iotest 114 specifically wants to create an unsafe image for later amendment rather than defaulting to our new default of recording a probed format, so it needs an update. While touching it, expand it to cover all of the various warnings enabled by this patch. iotest 301 also shows a change to qcow messages. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-11-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-14qcow2: Deprecate use of qemu-img amend to change backing fileEric Blake
The use of 'qemu-img amend' to change qcow2 backing files is not tested very well. In particular, our implementation has a bug where if a new backing file is provided without a format, then the prior format is blindly reused, even if this results in data corruption, but this is not caught by iotests. There are also situations where amending other options needs access to the original backing file (for example, on a downgrade to a v2 image, knowing whether a v3 zero cluster must be allocated or may be left unallocated depends on knowing whether the backing file already reads as zero), but the command line does not have a nice way to tell us both the backing file to use for opening the image as well as the backing file to install after the operation is complete. Even if we do allow changing the backing file, it is redundant with the existing ability to change backing files via 'qemu-img rebase -u'. It is time to deprecate this support (leaving the existing behavior intact, even if it is buggy), and at a point in the future, require the use of only 'qemu-img rebase' for adjusting backing chain relations, saving 'qemu-img amend' for changes unrelated to the backing chain. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-8-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-14block: Error if backing file fails during creation without -uEric Blake
Back in commit 6e6e55f5 (Jul 2017, v2.10), we tweaked the code to warn if the backing file could not be opened but the user gave a size, unless the user also passes the -u option to bypass the open of the backing file. As one common reason for failure to open the backing file is when there is mismatch in the requested backing format in relation to what the backing file actually contains, we actually want to open the backing file and ensure that it has the right format in as many cases as possible. iotest 301 for qcow demonstrates how detecting explicit format mismatch is useful to prevent the creation of an image that would probe differently than the user requested. Now is the time to finally turn the warning an error, as promised. Note that the original warning was added prior to our documentation of an official deprecation policy (eb22aeca, also Jul 2017), and because the warning didn't mention the word "deprecated", we never actually remembered to document it as such. But the warning has been around long enough that I don't see prolonging it another two releases. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-7-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-14block: Finish deprecation of 'qemu-img convert -n -o'Eric Blake
It's been two releases since we started warning; time to make the combination an error as promised. There was no iotest coverage, so add some. While touching the documentation, tweak another section heading for consistent style. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-3-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-13docs/system/s390x: Improve the 3270 documentationThomas Huth
There is some additional information about the 3270 support in our Wiki at https://wiki.qemu.org/Features/3270 - so let's include this information into the main documentation now to have one single source of information (the Wiki page could later be removed). While at it, I also shortened the lines of the first example a little bit. Otherwise they showed up with a horizontal scrollbar in my Firefox browser. Message-Id: <20200713075112.442-1-thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-07-12Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging Testing and misc build updates: - tests/vm support for aarch64 VMs - tests/tcg better cross-compiler detection - update docker tooling to support registries - update docker support for xtensa - gitlab build docker images and store in registry - gitlab use docker images for builds - a number of skipIf updates to support move - linux-user MAP_FIXED_NOREPLACE fix - qht-bench compiler tweaks - configure fix for secret keyring - tsan fiber annotation clean-up - doc updates for mttcg/icount/gdbstub - fix cirrus to use brew bash for iotests - revert virtio-gpu breakage - fix LC_ALL to avoid sorting changes in iotests # gpg: Signature made Sat 11 Jul 2020 15:56:42 BST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits) iotests: Set LC_ALL=C for sort Revert "vga: build virtio-gpu as module" tests: fix "make check-qtest" for modular builds .cirrus.yml: add bash to the brew packages tests/docker: update toolchain set in debian-xtensa-cross tests/docker: fall back more gracefully when pull fails docs: Add to gdbstub documentation the PhyMemMode docs/devel: add some notes on tcg-icount for developers docs/devel: convert and update MTTCG design document tests/qht-bench: Adjust threshold computation tests/qht-bench: Adjust testing rate by -1 travis.yml: Test also the other targets on s390x shippable: pull images from registry instead of building testing: add check-build target containers.yml: build with docker.py tooling gitlab: limit re-builds of the containers tests: improve performance of device-introspect-test gitlab: add avocado asset caching gitlab: enable check-tcg for linux-user tests linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-11docs: Add to gdbstub documentation the PhyMemModeJon Doron
The PhyMemMode gdb extension command was missing from the gdb.rst document. Signed-off-by: Jon Doron <arilou@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200601171609.1665397-1-arilou@gmail.com> Message-Id: <20200709141327.14631-4-alex.bennee@linaro.org>
2020-07-11target/avr: Add section into QEMU documentationThomas Huth
The new section explains basic ways of using AVR target in QEMU. Signed-off-by: Michael Rolnik <mrolnik@gmail.com> [thuth: Converted doc from texi to Sphinx syntax] Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-31-huth@tuxfamily.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-06pcspk: update docs/system/target-i386-desc.rst.incGerd Hoffmann
Add PC speaker with config hints. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200702132525.6849-20-kraxel@redhat.com
2020-07-06audio: add soundhw deprecation noticeGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200702132525.6849-19-kraxel@redhat.com
2020-07-03Deprecate TileGX portPeter Maydell
Deprecate our TileGX target support: * we have no active maintainer for it * it has had essentially no contributions (other than tree-wide cleanups and similar) since it was first added * the Linux kernel dropped support in 2018, as has glibc Note the deprecation in the manual, but don't try to print a warning when QEMU runs -- printing unsuppressable messages is more obtrusive for linux-user mode than it would be for system-emulation mode, and it doesn't seem worth trying to invent a new suppressible-error system for linux-user just for this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20200619154831.26319-1-peter.maydell@linaro.org
2020-06-26numa: forbid '-numa node, mem' for 5.1 and newer machine typesIgor Mammedov
Deprecation period is run out and it's a time to flip the switch introduced by cd5ff8333a. Disable legacy option for new machine types (since 5.1) and amend documentation. '-numa node,memdev' shall be used instead of disabled option with new machine types. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200609135635.761587-1-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-25Merge remote-tracking branch 'remotes/armbru/tags/pull-qdev-2020-06-23' into ↵Peter Maydell
staging Qdev patches for 2020-06-23 # gpg: Signature made Tue 23 Jun 2020 15:08:28 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qdev-2020-06-23: sd/milkymist-memcard: Fix error API violation sd/pxa2xx_mmci: Don't crash on pxa2xx_mmci_init() error arm/aspeed: Drop aspeed_board_init_flashes() parameter @errp qdev: Make qdev_prop_set_drive() match the other helpers qdev: Reject chardev property override qdev: Reject drive property override qdev: Improve netdev property override error a bit qdev: Eliminate get_pointer(), set_pointer() blockdev: Deprecate -drive with bogus interface type docs/qdev-device-use.txt: Update section "Default Devices" fdc: Deprecate configuring floppies with -global isa-fdc fdc: Open-code fdctrl_init_isa() fdc: Reject clash between -drive if=floppy and -global isa-fdc iotests/172: Cover -global floppy.drive=... iotests/172: Cover empty filename and multiple use of drives iotests/172: Include "info block" in test output Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23blockdev: Deprecate -drive with bogus interface typeMarkus Armbruster
Drives with interface types other than if=none are for onboard devices. Unfortunately, any such drives the board doesn't pick up can still be used with -device, like this: $ qemu-system-x86_64 -nodefaults -display none -S -drive if=floppy,id=bogus,unit=7 -device ide-cd,drive=bogus -monitor stdio QEMU 5.0.50 monitor - type 'help' for more information (qemu) info block bogus: [not inserted] Attached to: /machine/peripheral-anon/device[0] Removable device: not locked, tray closed (qemu) info qtree bus: main-system-bus type System [...] bus: ide.1 type IDE dev: ide-cd, id "" ---> drive = "bogus" [...] unit = 0 (0x0) [...] This kind of abuse has always worked. Deprecate it: qemu-system-x86_64: -drive if=floppy,id=bogus,unit=7: warning: bogus if=floppy is deprecated, use if=none Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200622094227.1271650-9-armbru@redhat.com>
2020-06-23fdc: Deprecate configuring floppies with -global isa-fdcMarkus Armbruster
Deprecate -global isa-fdc.driveA=... -global isa-fdc.driveB=... in favour of -device floppy,unit=0,drive=... -device floppy,unit=1,drive=... Same for the other floppy controller devices. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Message-Id: <20200622094227.1271650-7-armbru@redhat.com>
2020-06-22docs: Document the RX targetYoshinori Sato
Add rx-virt target specification document. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-Id: <20200308130637.37651-1-ysato@users.sourceforge.jp> [PMD: Cover in MAINTAINERS, rename as gdbsim, use machine argument] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-19Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20200618' into stagingPeter Maydell
s390x update: - update Linux headers to 5.8-rc1 (for vfio-ccw path handling) - vfio-ccw: add support for path handling - documentation fix # gpg: Signature made Thu 18 Jun 2020 16:36:04 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [marginal] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [marginal] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20200618: docs/s390x: fix vfio-ap device_del description vfio-ccw: Add support for the CRW region and IRQ s390x/css: Refactor the css_queue_crw() routine vfio-ccw: Refactor ccw irq handler vfio-ccw: Add support for the schib region vfio-ccw: Refactor cleanup of regions Linux headers: update Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-18net: Drop the legacy "name" parameter from the -net optionThomas Huth
It's been deprecated since QEMU v3.1, so it's time to finally remove it. The "id" parameter can simply be used instead. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18docs/s390x: fix vfio-ap device_del descriptionChristian Borntraeger
device_del requires an id and not a sysfsfile. Fixes: bac03ec72f1b ("s390x/vfio-ap: document hot plug/unplug of vfio-ap device") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200617160604.5593-1-borntraeger@de.ibm.com> [CH: add missing '$'] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-05Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20200605' into staging target-arm queue: hw/ssi/imx_spi: Handle tx burst lengths other than 8 correctly hw/input/pxa2xx_keypad: Replace hw_error() by qemu_log_mask() hw/arm/pxa2xx: Replace printf() call by qemu_log_mask() target/arm: Convert crypto insns to gvec hw/adc/stm32f2xx_adc: Correct memory region size and access size tests/acceptance: Add a boot test for the xlnx-versal-virt machine docs/system: Document Aspeed boards raspi: Add model of the USB controller target/arm: Convert 2-reg-and-shift and 1-reg-imm Neon insns to decodetree # gpg: Signature made Fri 05 Jun 2020 17:48:39 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200605: (29 commits) target/arm: Convert Neon one-register-and-immediate insns to decodetree target/arm: Convert VCVT fixed-point ops to decodetree target/arm: Convert Neon VSHLL, VMOVL to decodetree target/arm: Convert Neon narrowing shifts with op==9 to decodetree target/arm: Convert Neon narrowing shifts with op==8 to decodetree target/arm: Convert VQSHLU, VQSHL 2-reg-shift insns to decodetree target/arm: Convert Neon VSRA, VSRI, VRSHR, VRSRA 2-reg-shift insns to decodetree target/arm: Convert Neon VSHR 2-reg-shift insns to decodetree target/arm: Convert Neon VSHL and VSLI 2-reg-shift insn to decodetree raspi2 acceptance test: add test for dwc-hsotg (dwc2) USB host wire in the dwc-hsotg (dwc2) USB host controller emulation usb: add short-packet handling to usb-storage driver dwc-hsotg (dwc2) USB host controller emulation dwc-hsotg (dwc2) USB host controller state definitions dwc-hsotg (dwc2) USB host controller register definitions raspi: add BCM2835 SOC MPHI emulation docs/system: Document Aspeed boards tests/acceptance: Add a boot test for the xlnx-versal-virt machine hw/adc/stm32f2xx_adc: Correct memory region size and access size target/arm: Split helper_crypto_sm3tt ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05docs/system: Document Aspeed boardsCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200602135050.593692-1-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-05docs/s390x: document vfio-ccwCornelia Huck
Add a basic example for passing a dasd via vfio-ccw. Message-Id: <20200518075522.97643-1-cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-05docs/s390x: document 3270Cornelia Huck
Add some basic info how to use 3270 devices. Message-Id: <20200515151518.83950-3-cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-05docs/s390x: document the virtual cssCornelia Huck
Add some hints about "devno" rules. Message-Id: <20200515151518.83950-2-cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-03docs: deprecated: Update the -bios documentationAlistair Francis
Update the -bios deprecation documentation to describe the new behaviour. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-06-03target/riscv: Drop support for ISA spec version 1.09.1Alistair Francis
The RISC-V ISA spec version 1.09.1 has been deprecated in QEMU since 4.1. It's not commonly used so let's remove support for it. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-06-03target/riscv: Remove the deprecated CPUsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-06-03hw/riscv: spike: Remove deprecated ISA specific machinesAlistair Francis
The ISA specific Spike machines have been deprecated in QEMU since 4.1, let's finally remove them. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2020-05-26hw/mips/fuloong2e: Fix typo in Fuloong machine namePhilippe Mathieu-Daudé
We always miswrote the Fuloong machine... Fix its name. Add an machine alias to the previous name for backward compatibility. Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Message-id: <20200526104726.11273-11-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>