aboutsummaryrefslogtreecommitdiff
path: root/docs/system/arm
AgeCommit message (Collapse)Author
2022-03-02target/arm: Implement FEAT_LPA2Richard Henderson
This feature widens physical addresses (and intermediate physical addresses for 2-stage translation) from 48 to 52 bits, when using 4k or 16k pages. This introduces the DS bit to TCR_ELx, which is RES0 unless the page size is enabled and supports LPA2, resulting in the effective value of DS for a given table walk. The DS bit changes the format of the page table descriptor slightly, moving the PS field out to TCR so that all pages have the same sharability and repurposing those bits of the page table descriptor for the highest bits of the output address. Do not yet enable FEAT_LPA2; we need extra plumbing to avoid tickling an old kernel bug. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220301215958.157011-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-02target/arm: Implement FEAT_LPARichard Henderson
This feature widens physical addresses (and intermediate physical addresses for 2-stage translation) from 48 to 52 bits, when using 64k pages. The only thing left at this point is to handle the extra bits in the TTBR and in the table descriptors. Note that PAR_EL1 and HPFAR_EL2 are nominally extended, but we don't mask out the high bits when writing to those registers, so no changes are required there. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220301215958.157011-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-02target/arm: Implement FEAT_LVARichard Henderson
This feature is relatively small, as it applies only to 64k pages and thus requires no additional changes to the table descriptor walking algorithm, only a change to the minimum TSZ (which is the inverse of the maximum virtual address space size). Note that this feature widens VBAR_ELx, but we already treat the register as being 64 bits wide. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220301215958.157011-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-28Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20220227' ↵Peter Maydell
into staging aspeed queue: * Removal of the swift-bmc machine * New Secure Boot Controller model * Improvements on the rainier machine * Various small cleanups # gpg: Signature made Sun 27 Feb 2022 08:45:45 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20220227: aspeed/sdmc: Add trace events aspeed/smc: Add an address mask on segment registers aspeed: Introduce a create_pca9552() helper aspeed: rainier: Add strap values taken from hardware aspeed: rainier: Add i2c LED devices ast2600: Add Secure Boot Controller model arm: Remove swift-bmc machine Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-26arm: Remove swift-bmc machineJoel Stanley
It was scheduled for removal in 7.0. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-21hw/arm: add initial mori-bmc boardPatrick Venture
This is the BMC attached to the OpenBMC Mori board. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Ilkyun Choi <ikchoi@google.com> Message-id: 20220208233104.284425-1-venture@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20hw/arm/virt: KVM: Enable PAuth when supported by the hostMarc Zyngier
Add basic support for Pointer Authentication when running a KVM guest and that the host supports it, loosely based on the SVE support. Although the feature is enabled by default when the host advertises it, it is possible to disable it by setting the 'pauth=off' CPU property. The 'pauth' comment is removed from cpu-features.rst, as it is now common to both TCG and KVM. Tested on an Apple M1 running 5.16-rc6. Cc: Eric Auger <eric.auger@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220107150154.2490308-1-maz@kernel.org [PMM: fixed indentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-18hw/arm: add control knob to disable kaslr_seed via DTBAlex Bennée
Generally a guest needs an external source of randomness to properly enable things like address space randomisation. However in a trusted boot environment where the firmware will cryptographically verify components having random data in the DTB will cause verification to fail. Add a control knob so we can prevent this being added to the system DTB. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jerome Forissier <jerome@forissier.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <20220105135009.1584676-22-alex.bennee@linaro.org>
2021-12-15docs: aspeed: ADC is now modelledJoel Stanley
Move it to the supported list. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-5-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-12-15docs: aspeed: Give an example of booting a kernelJoel Stanley
A common use case for the ASPEED machine is to boot a Linux kernel. Provide a full example command line. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-4-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-12-15docs: aspeed: Update OpenBMC image URLJoel Stanley
This is the latest URL for the OpenBMC CI. The old URL still works, but redirects. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 20211117065752.330632-3-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-12-15docs: aspeed: Add new boardsJoel Stanley
Add X11, FP5280G2, G220A, Rainier and Fuji. Mention that Swift will be removed in v7.0. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20211117065752.330632-2-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-11-22docs: Render binary names as monospaced textPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211118192744.64325-1-philmd@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-11-08tests/acceptance: rename tests acceptance to tests avocadoWillian Rampazzo
In the discussion about renaming the `tests/acceptance` [1], the conclusion was that the folders inside `tests` are related to the framework running the tests and not directly related to the type of the tests. This changes the folder to `tests/avocado` and adjusts the MAKEFILE, the CI related files and the documentation. [1] https://lists.gnu.org/archive/html/qemu-devel/2021-05/msg06553.html Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Willian Rampazzo <willianr@redhat.com> Message-Id: <20211105155354.154864-3-willianr@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-09-30docs/system/arm: xlnx-versal-virt: BBRAM and eFUSE UsageTong Ho
Add BBRAM and eFUSE usage to the Xilinx Versal Virt board document. Signed-off-by: Tong Ho <tong.ho@xilinx.com> Message-id: 20210917052400.1249094-10-tong.ho@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-13hw/arm: Add support for kudo-bmc board.Chris Rauer
kudo-bmc is a board supported by OpenBMC. https://github.com/openbmc/openbmc/tree/master/meta-fii/meta-kudo Since v1: - hyphenated Cortex-A9 Tested: Booted kudo firmware. Signed-off-by: Chris Rauer <crauer@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20210907223234.1165705-1-crauer@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-01hw/arm/virt: target-arm: Add A64FX processor support to virt machineShuuichirou Ishii
Add -cpu a64fx to use A64FX processor when -machine virt option is specified. In addition, add a64fx to the Supported guest CPU types in the virt.rst document. Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-02docs: Format literals correctlyPeter Maydell
In rST markup, single backticks `like this` represent "interpreted text", which can be handled as a bunch of different things if tagged with a specific "role": https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text (the most common one for us is "reference to a URL, which gets hyperlinked"). The default "role" if none is specified is "title_reference", intended for references to book or article titles, and it renders into the HTML as <cite>...</cite> (usually comes out as italics). This commit fixes various places in the manual which were using single backticks when double backticks (for literal text) were intended, and covers those files where only one or two instances of these errors were made. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-08-02docs/system/arm/cpu-features.rst: Format literals correctlyPeter Maydell
In rST markup, single backticks `like this` represent "interpreted text", which can be handled as a bunch of different things if tagged with a specific "role": https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text (the most common one for us is "reference to a URL, which gets hyperlinked"). The default "role" if none is specified is "title_reference", intended for references to book or article titles, and it renders into the HTML as <cite>...</cite> (usually comes out as italics). To format a literal (generally rendered as fixed-width font), double-backticks are required. cpu-features.rst consistently uses single backticks when double backticks are required; correct it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210726142338.31872-8-peter.maydell@linaro.org
2021-08-02docs: Add documentation of Arm 'imx25-pdk' boardPeter Maydell
Add brief documentation of the Arm 'imx25-pdk' board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210722175229.29065-4-peter.maydell@linaro.org
2021-08-02docs: Add documentation of Arm 'kzm' boardPeter Maydell
Add brief documentation of the Arm 'kzm' board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210722175229.29065-3-peter.maydell@linaro.org
2021-08-02docs: Add documentation of Arm 'mainstone' boardPeter Maydell
Add brief documentation of the Arm 'mainstone' board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210722175229.29065-2-peter.maydell@linaro.org
2021-07-27target/arm: Add sve-default-vector-length cpu propertyRichard Henderson
Mirror the behavour of /proc/sys/abi/sve_default_vector_length under the real linux kernel. We have no way of passing along a real default across exec like the kernel can, but this is a decent way of adjusting the startup vector length of a process. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/482 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210723203344.968563-4-richard.henderson@linaro.org [PMM: tweaked docs formatting, document -1 special-case, added fixup patch from RTH mentioning QEMU's maximum veclen.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-18docs: Add skeletal documentation of highbank and midwayPeter Maydell
Add skeletal documentation for the highbank and midway machines. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210713142226.19155-4-peter.maydell@linaro.org
2021-07-18docs: Add skeletal documentation of the emcraft-sf2Peter Maydell
Add skeletal documentation of the emcraft-sf2 machine. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210713142226.19155-3-peter.maydell@linaro.org
2021-07-18docs: Add skeletal documentation of cubieboardPeter Maydell
Add skeletal documentation of the cubieboard machine. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210713142226.19155-2-peter.maydell@linaro.org
2021-07-09docs/system: arm: Add stm32 boards descriptionAlexandre Iooss
This adds the target guide for Netduino 2, Netduino Plus 2 and STM32VLDISCOVERY. Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210617165647.2575955-4-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-02docs/system/arm: Add quanta-gbs-bmc referencePatrick Venture
Add line item reference to quanta-gbs-bmc machine. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20210615192848.1065297-3-venture@google.com [PMM: fixed underline Sphinx warning] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-02docs/system/arm: Add quanta-q7l1-bmc referencePatrick Venture
Adds a line-item reference to the supported quanta-q71l-bmc aspeed entry. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20210615192848.1065297-2-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-24docs/system: arm: Add nRF boards descriptionAlexandre Iooss
This adds the target guide for BBC Micro:bit. Information is taken from https://wiki.qemu.org/Features/MicroBit and from hw/arm/nrf51_soc.c. Signed-off-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20210621075625.540471-1-erdnaxe@crans.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-24target/arm: Implement MTE3Peter Collingbourne
MTE3 introduces an asymmetric tag checking mode, in which loads are checked synchronously and stores are checked asynchronously. Add support for it. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210616195614.11785-1-pcc@google.com [PMM: Add line to emulation.rst] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-21docs/system/arm: Document which architecture extensions we emulatePeter Maydell
These days the Arm architecture has a wide range of fine-grained optional extra architectural features. We implement quite a lot of these but by no means all of them. Document what we do implement, so that users can find out without having to dig through back-issues of our Changelog on the wiki. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210617140328.28622-1-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-03arm: Consistently use "Cortex-Axx", not "Cortex Axx"Peter Maydell
The official punctuation for Arm CPU names uses a hyphen, like "Cortex-A9". We mostly follow this, but in a few places usage without the hyphen has crept in. Fix those so we consistently use the same way of writing the CPU name. This commit was created with: git grep -z -l 'Cortex ' | xargs -0 sed -i 's/Cortex /Cortex-/' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210527095152.10968-1-peter.maydell@linaro.org
2021-05-10hw/arm/mps2-tz: Implement AN524 memory remapping via machine propertyPeter Maydell
The AN524 FPGA image supports two memory maps, which differ in where the QSPI and BRAM are. In the default map, the BRAM is at 0x0000_0000, and the QSPI at 0x2800_0000. In the second map, they are the other way around. In hardware, the initial mapping can be selected by the user by writing either "REMAP: BRAM" (the default) or "REMAP: QSPI" in the board configuration file. The board config file is acted on by the "Motherboard Configuration Controller", which is an entirely separate microcontroller on the dev board but outside the FPGA. The guest can also dynamically change the mapping via the SCC CFG_REG0 register. Implement this functionality for QEMU, using a machine property "remap" with valid values "BRAM" and "QSPI" to allow the user to set the initial mapping, in the same way they can on the FPGA, and wiring up the bit from the SCC register to also switch the mapping. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210504120912.23094-4-peter.maydell@linaro.org
2021-05-10docs: fix link in sbsa descriptionAlex Bennée
A trailing _ makes all the difference to the rendered link. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210428131316.31390-1-alex.bennee@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-01aspeed: Integrate HACEJoel Stanley
Add the hash and crypto engine model to the Aspeed socs. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210409000253.1475587-3-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01hw: Model ASPEED's Hash and Crypto EngineJoel Stanley
The HACE (Hash and Crypto Engine) is a device that offloads MD5, SHA1, SHA2, RSA and other cryptographic algorithms. This initial model implements a subset of the device's functionality; currently only MD5/SHA hashing, and on the ast2600's scatter gather engine. Co-developed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> [ clg: - fixes for 32-bit and OSX builds ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210409000253.1475587-2-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-12hw/arm: Add MFT device to NPCM7xx SocHao Wu
This patch adds the recently implemented MFT device to the NPCM7XX SoC file. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-4-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm: versal: Add support for the XRAMsEdgar E. Iglesias
Connect the support for the Versal Accelerator RAMs (XRAMs). Reviewed-by: Luc Michel <luc@lmichel.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210308224637.2949533-3-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210309' ↵Peter Maydell
into staging Aspeed patches : * New model for the Aspeed LPC controller * Misc cleanups # gpg: Signature made Tue 09 Mar 2021 11:54:25 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20210309: hw/misc: Model KCS devices in the Aspeed LPC controller hw/misc: Add a basic Aspeed LPC controller model hw/arm: ast2600: Correct the iBT interrupt ID hw/arm: ast2600: Set AST2600_MAX_IRQ to value from datasheet hw/arm: ast2600: Force a multiple of 32 of IRQs for the GIC hw/arm/aspeed: Fix location of firmware images in documentation arm/ast2600: Fix SMP booting with -kernel Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-09hw/misc: Add a basic Aspeed LPC controller modelCédric Le Goater
This is a very minimal framework to access registers which are used to configure the AHB memory mapping of the flash chips on the LPC HC Firmware address space. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-Id: <20210302014317.915120-5-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-09hw/arm/aspeed: Fix location of firmware images in documentationCédric Le Goater
Firmware images can be found on the OpenBMC jenkins site and on the OpenBMC GitHub release page. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20210303072743.1551329-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-08docs/system/arm/mps2.rst: Document the new mps3-an547 boardPeter Maydell
Add brief documentation of the new mps3-an547 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210219144617.4782-44-peter.maydell@linaro.org
2021-03-08docs/system/arm/mps2.rst: Document the new mps3-an524 boardPeter Maydell
Add brief documentation of the new mps3-an524 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-24-peter.maydell@linaro.org
2021-03-05hw/arm: Add npcm7xx emc modelDoug Evans
This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210218212453.831406-3-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16hw/i2c: Implement NPCM7XX SMBus Module Single ModeHao Wu
This commit implements the single-byte mode of the SMBus. Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses compliant with SMBus and I2C protocol. This patch implements the single-byte mode of the SMBus. In this mode, the user sends or receives a byte each time. The SMBus device transmits it to the underlying i2c device and sends an interrupt back to the QEMU guest. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-2-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-08docs/system: document an example booting the versatilepb machineAlex Bennée
There is a bit more out there including Aurelien's excellent write up and older Debian images here: https://www.aurel32.net/info/debian_arm_qemu.php https://people.debian.org/~aurel32/qemu/armel/ However the web is transitory and git is forever so lets add something to the fine manual. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Message-Id: <20210202134001.25738-16-alex.bennee@linaro.org>
2021-02-08docs/system: document an example vexpress-a15 invocationAlex Bennée
The wiki and the web are curiously absent of the right runes to boot a vexpress model so I had to work from first principles to work it out. Use the more modern -drive notation so alternative backends can be used (unlike the hardwired -sd mode). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Message-Id: <20210202134001.25738-15-alex.bennee@linaro.org>
2021-01-29arm-virt: add secure pl061 for reset/power downMaxim Uvarov
Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-19target/arm: Add cpu properties to control pauthRichard Henderson
The crypto overhead of emulating pauth can be significant for some workloads. Add two boolean properties that allows the feature to be turned off, on with the architected algorithm, or on with an implementation defined algorithm. We need two intermediate booleans to control the state while parsing properties lest we clobber ID_AA64ISAR1 into an invalid intermediate state. Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210111235740.462469-3-richard.henderson@linaro.org [PMM: fixed docs typo, tweaked text to clarify that the impdef algorithm is specific to QEMU] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>