| Age | Commit message (Collapse) | Author |
|---|
|
Check that -device nvdimm,unarmed=on is used when -object
memory-backend-file,readonly=on and document that -device
nvdimm,unarmed=on|off controls whether the NVDIMM appears read-only to
the guest.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210104171320.575838-4-stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
For device dax (e.g., /dev/dax0.0), the NUM of 'align=NUM' option
needs to match the alignment requirement of the device dax.
It must be larger than or equal to the 'align' of device dax.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20200429085011.63752-3-jingqi.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Persistent backend setup requires some knowledge about nvdimm and ndctl
tool. Some users report they may struggle to gather these knowledge and
have difficulty to setup it properly.
Here we provide two examples for persistent backend and gives the link
to ndctl. By doing so, user could try it directly and do more
investigation on persistent backend setup with ndctl.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190801004053.7021-1-richardw.yang@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When a file supporting DAX is used as vNVDIMM backend, mmap it with
MAP_SYNC flag in addition which can ensure file system metadata
synced in each guest writes to the backend file, without other QEMU
actions (e.g., periodic fsync() by QEMU).
Current, We have below different possible use cases:
1. pmem=on is set, shared=on is set, MAP_SYNC supported:
a: backend is a dax supporting file.
- MAP_SYNC will active.
b: backend is not a dax supporting file.
- mmap will trigger a warning. then MAP_SYNC flag will be ignored
2. The rest of cases:
- we will never pass the MAP_SYNC to mmap2
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com>
[ehabkost: Rebased patch to latest code on master]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190422004849.26463-2-richardw.yang@linux.intel.com>
[ehabkost: squashed documentation patch]
Message-Id: <20190422004849.26463-3-richardw.yang@linux.intel.com>
[ehabkost: documentation fixup]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
I spent way too much time trying to figure out why the emulated NVDIMM
was missing under Linux. In an effort to help others who might be looking
for these kinds of things in the future, include a hint.
Signed-off-by: Kees Cook <keescook@chromium.org>
Message-id: 20181018201351.GA25286@beast
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
When QEMU emulates vNVDIMM labels and migrates vNVDIMM devices, it
needs to know whether the backend storage is a real persistent memory,
in order to decide whether special operations should be performed to
ensure the data persistence.
This boolean option 'pmem' allows users to specify whether the backend
storage of memory-backend-file is a real persistent memory. If
'pmem=on', QEMU will set the flag RAM_PMEM in the RAM block of the
corresponding memory region. If 'pmem' is set while lack of libpmem
support, a error is generated.
Signed-off-by: Junyan He <junyan.he@intel.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Replace the "nvdimm-cap" option which took numeric arguments such as "2"
with a more user friendly "nvdimm-persistence" option which takes symbolic
arguments "cpu" or "mem-ctrl".
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add a machine command line option to allow the user to control the Platform
Capabilities Structure in the virtualized NFIT. This Platform Capabilities
Structure was added in ACPI 6.2 Errata A.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently the only vNVDIMM backend can guarantee the guest write
persistence is device DAX on Linux, because no host-side kernel cache
is involved in the guest access to it. The approach to detect whether
the backend is device DAX needs to access sysfs, which may not work
with SELinux.
Instead, we add the 'unarmed' option to device 'nvdimm', so that users
or management utils, which have enough knowledge about the backend,
can control the unarmed flag in guest ACPI NFIT via this option. The
guest Linux NVDIMM driver, for example, will mark the corresponding
vNVDIMM device read-only if the unarmed flag in guest NFIT is set.
The default value of 'unarmed' option is 'off' in order to keep the
backwards compatibility.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-4-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
When mmap(2) the backend files, QEMU uses the host page size
(getpagesize(2)) by default as the alignment of mapping address.
However, some backends may require alignments different than the page
size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux
kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned,
fails with a kernel message like
[617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff)
Because there is no common approach to get such alignment requirement,
we add the 'align' option to 'memory-backend-file', so that users or
management utils, which have enough knowledge about the backend, can
specify a proper alignment via this option.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ehabkost: fixed typo, fixed error_setg() format string]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
