aboutsummaryrefslogtreecommitdiff
path: root/dma.h
AgeCommit message (Collapse)Author
2012-04-10Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: (46 commits) qed: remove incoming live migration blocker qed: honor BDRV_O_INCOMING for incoming live migration migration: clear BDRV_O_INCOMING flags on end of incoming live migration qed: add bdrv_invalidate_cache to be called after incoming live migration blockdev: open images with BDRV_O_INCOMING on incoming live migration block: add a function to clear incoming live migration flags block: Add new BDRV_O_INCOMING flag to notice incoming live migration block stream: close unused files and update ->backing_hd qemu-iotests: Fix call syntax for qemu-io qemu-iotests: Fix call syntax for qemu-img qemu-iotests: Test unknown qcow2 header extensions qemu-iotests: qcow2.py sheepdog: fix send req helpers sheepdog: implement SD_OP_FLUSH_VDI operation block: bdrv_append() fixes qed: track dirty flag status qemu-img: add dirty flag status qed: image fragmentation statistics qemu-img: add image fragmentation statistics block: document job API ...
2012-04-07remove useless comments in dmaWanpeng Li
This comment is useless, just removes it and makes the codes clear. Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-05Use DMADirection type for dma_bdrv_ioDavid Gibson
Currently dma_bdrv_io() takes a 'to_dev' boolean parameter to determine the direction of DMA it is emulating. We already have a DMADirection enum designed specifically to encode DMA directions. This patch uses it for dma_bdrv_io() as well. This involves removing the DMADirection definition from the #ifdef it was inside, but since that only existed to protect the definition of dma_addr_t from places where config.h is not included, there wasn't any reason for it to be there in the first place. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-22dma-helpers: add accounting wrappersPaolo Bonzini
The length of the transfer is already in the sglist, the wrapper simply fetches it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-22dma-helpers: add dma_buf_read and dma_buf_writePaolo Bonzini
These helpers do a full transfer from an in-memory buffer to target memory, with support for scatter/gather lists. It will be used to store the reply of an emulated command into a QEMUSGList provided by the adapter. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-22dma-helpers: make QEMUSGList target independentPaolo Bonzini
scsi-disk will manage scatter/gather list, but it does not create single entries so it remains target-independent. Make QEMUSGList available to it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-11-01Use dma_addr_t type for scatter/gather codeDavid Gibson
This patch uses the newly created dma_addr_t type throughout the scatter/gather handling code in dma-helpers.c whenever we need to represent a dma bus address. This makes a better distinction as to what is a bus address and what is a cpu physical address. Since we don't support IOMMUs yet, they can't be very different for now, but that will change in future, and this preliminary helps clarify what's going on. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01Define DMA address and direction typesDavid Gibson
As a preliminary to adding more extensive DMA and IOMMU infrastructure support into qemu, this patch defines a dma_addr_t for storing DMA bus addresses and a DMADirection enum which describes whether a DMA is from an external device to main memory or from main memory to an external device. For now dma_addr_t is just defined to be target_phys_addr_t, but in future, we can change this to support machines where we have bus addresses which don't necessarily have the same format as CPU physical addresses. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-20dma-helpers: allow including from target-independent codePaolo Bonzini
Target-independent code cannot construct sglists, but it can take them from the outside as a black box. Allow this. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-19dma-helpers: rename is_write to to_devPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-04move QEMUSGList typedefGerd Hoffmann
Move the QEMUSGList typedef to qemu-common so it can easily be used. The actual struct definition stays in dma.h. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-15make dma_bdrv_io available to driversChristoph Hellwig
Make dma_bdrv_io available for drivers, and pass an explicit I/O function instead of hardcoding bdrv_aio_readv/bdrv_aio_writev. This is required to implement non-READ/WRITE dma commands in the ide driver, e.g. the upcoming TRIM support. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-05-27fully split aio_pool from BlockDriverChristoph Hellwig
Now that we have a separate aio pool structure we can remove those aio pool details from BlockDriver. Every driver supporting AIO now needs to declare a static AIOPool with the aiocb size and the cancellation method. This cleans up the current code considerably and will make it cleaner and more obvious to support two different aio implementations behind a single BlockDriver. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-19Hardware convenience libraryPaul Brook
The only target dependency for most hardware is sizeof(target_phys_addr_t). Build these files into a convenience library, and use that instead of building for every target. Remove and poison various target specific macros to avoid bogus target dependencies creeping back in. Big/Little endian is not handled because devices should not know or care about this to start with. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-03-20Implement cancellation method for dma async I/O (Avi Kivity)aliguori
Move the dma helpers to a private aio pool, and implement a cancellation method for them. Should prevent issues when cancelling I/O while dma is in progress. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6872 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05Introduce block dma helpers (Avi Kivity)aliguori
These helpers perform read/write requests on entire scatter/gather lists, relieving the device emulation code from mapping and unmapping physical memory, and from looping when map resources are exhausted. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6524 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05Add a scatter-gather list type and accessors (Avi Kivity)aliguori
Scatter-gather lists are used extensively in dma-capable devices; a single data structure allows more code reuse later on. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6522 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-27 10:48:00 +0000