aboutsummaryrefslogtreecommitdiff
path: root/disas/mips.c
AgeCommit message (Collapse)Author
2015-06-12target-mips: add MTHC0 and MFHC0 instructionsLeon Alrae
Implement MTHC0 and MFHC0 instructions. In MIPS32 they are used to access upper word of extended to 64-bits CP0 registers. In MIPS64, when CP0 destination register specified is the EntryLo0 or EntryLo1, bits 1:0 of the GPR appear at bits 31:30 of EntryLo0 or EntryLo1. This is to compensate for RI and XI, which were shifted to bits 63:62 by MTC0 to EntryLo0 or EntryLo1. Therefore creating separate functions for EntryLo0 and EntryLo1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-11target-mips: add ERETNC instruction and Config5.LLB bitLeon Alrae
ERETNC is identical to ERET except that an ERETNC will not clear the LLbit that is set by execution of an LL instruction, and thus when placed between an LL and SC sequence, will never cause the SC to fail. Presence of ERETNC is denoted by the Config5.LLB. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-12-16disas/mips: disable unused mips16_to_32_reg_map[]Leon Alrae
This array is used by print_mips16_insn_arg() which is guarded by #if 0. Therefore doing the same with the array as it generates clang warnings. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16disas/mips: remove unused mips_msa_control_names_numeric[32]Leon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-03disas/mips.c: disassemble MSA instructionsYongbok Kim
disassemble MIPS SIMD Architecture instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add TLBINV supportLeon Alrae
For Standard TLB configuration (Config.MT=1): TLBINV invalidates a set of TLB entries based on ASID. The virtual address is ignored in the entry match. TLB entries which have their G bit set to 1 are not modified. TLBINVF causes all entries to be invalidated. Single TLB entry can be marked as invalid on TLB entry write by having EntryHi.EHINV set to 1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14target-mips: remove JR, BLTZAL, BGEZAL and add NAL, BAL instructionsYongbok Kim
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14target-mips: add new Floating Point Comparison instructionsYongbok Kim
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14target-mips: add new Floating Point instructionsLeon Alrae
In terms of encoding MIPS32R6 MIN.fmt, MAX.fmt, MINA.fmt, MAXA.fmt replaced MIPS-3D RECIP1, RECIP2, RSQRT1, RSQRT2 instructions. In R6 all Floating Point instructions are supposed to be IEEE-2008 compliant i.e. FIR.HAS2008 always 1. However, QEMU softfloat for MIPS has not been updated yet. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14target-mips: add AUI, LSA and PCREL instruction familiesLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-13target-mips: add compact and CP1 branchesYongbok Kim
Introduce MIPS32R6 Compact Branch instructions which do not have delay slot - they have forbidden slot instead. However, current implementation does not support forbidden slot yet. Add also BC1EQZ and BC1NEZ instructions. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-13target-mips: add ALIGN, DALIGN, BITSWAP and DBITSWAP instructionsYongbok Kim
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: move CLO, DCLO, CLZ, DCLZ, SDBBP and free special2 in R6Leon Alrae
Also consider OPC_SPIM instruction as deleted in R6 because it is overlaping with MIPS32R6 SDBBP. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: redefine Integer Multiply and Divide instructionsLeon Alrae
Use "R6_" prefix in front of all new Multiply / Divide instructions for easier differentiation between R6 and preR6. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: move PREF, CACHE, LLD and SCD instructionsLeon Alrae
The encoding of PREF, CACHE, LLD and SCD instruction changed in MIPS32R6. Additionally, the hint codes in PREF instruction greater than or equal to 24 generate Reserved Instruction Exception. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13target-mips: move LL and SC instructionsLeon Alrae
The encoding of LL and SC instruction has changed in MIPS32 Release 6. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: James Hogan <james.hogan@imgtec.com>
2014-10-13target-mips: add SELEQZ and SELNEZ instructionsLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: James Hogan <james.hogan@imgtec.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 18:13:19 +0000