aboutsummaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)Author
2017-09-15net: Add SunGEM device emulation as found on Apple UniNorthBenjamin Herrenschmidt
This adds a simplistic emulation of the Sun GEM ethernet controller found in Apple ASICs. Currently we only support the Apple UniNorth 1.x variant, but the other Apple or Sun variants should mostly be a matter of adding PCI IDs options. We have a very primitive emulation of a single Broadcom 5201 PHY which is supported by the MacOS driver. This model brings out-of-the-box networking to MacOS 9, and all versions of OS X I tried with the mac99 platform. Further improvements from Mark: - Remove sungem.h file, moving constants into sungem.c as required - Switch to using tracepoints for debugging - Split register blocks into separate memory regions - Use arrays in SunGEMState to hold register values - Add state-saving support Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08ppc4xx_i2c: Move to hw/i2cBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-08-30s390x: refine pci dependenciesCornelia Huck
VIRTIO_PCI should properly depend on CONFIG_PCI. With this change, we can switch off pci for s390x by removing 'CONFIG_PCI=y' from the default config. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-03build-sys: add --disable-vhost-userMarc-André Lureau
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it enabled by default on non-win32, that is assumed to be POSIX. Fail if trying to enable it on win32. When trying to make a vhost-user netdev, it gives the following error: -netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type And similar error with the HMP/QMP monitors. While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST since it's a vhost-user specific variable. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-20configure: Use an explicit CONFIG_IVSHMEM rather than CONFIG_EVENTFDKamil Rytarowski
Rather than relying on everywhere that cares about whether the host supports ivshmem using CONFIG_EVENTFD, make configure set an explicit CONFIG_IVSHMEM. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org [PMM: split out from another patch, add commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-20configure: Rename CONFIG_IVSHMEM to CONFIG_IVSHMEM_DEVICEPeter Maydell
The current CONFIG_IVSHMEM is confusing, because it looks like it's a flag for "do we have ivshmem support?", but actually it's a flag for "is the ivshmem PCI device being compiled?" (and implicitly "do we have ivshmem support?" is tested with CONFIG_EVENTFD). Rename it to CONFIG_IVSHMEM_DEVICE to clear this confusion up; shortly we will add a new CONFIG_IVSHMEM which really does indicate whether the host can support ivshmem. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1500021225-4118-2-git-send-email-peter.maydell@linaro.org
2017-07-17hw/misc/mps2_scc: Implement MPS2 Serial Communication ControllerPeter Maydell
Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17hw/char/cmsdk-apb-timer: Implement CMSDK APB timer devicePeter Maydell
Implement a model of the simple timer device found in the CMSDK. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-5-git-send-email-peter.maydell@linaro.org
2017-07-17hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UARTPeter Maydell
Implement a model of the simple "APB UART" provided in the Cortex-M System Design Kit (CMSDK). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-07-17hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board modelsPeter Maydell
Model the ARM MPS2/MPS2+ FPGA based development board. The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger FPGA but is otherwise the same as the 2). Since the CPU itself and most of the devices are in the FPGA, the details of the board as seen by the guest depend significantly on the FPGA image. We model the following FPGA images: "mps2_an385" -- Cortex-M3 as documented in ARM Application Note AN385 "mps2_an511" -- Cortex-M3 'DesignStart' as documented in AN511 They are fairly similar but differ in the details for some peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-06-15vhost-user-scsi: Introduce vhost-user-scsi host deviceFelipe Franciosi
This commit introduces a vhost-user device for SCSI. This is based on the existing vhost-scsi implementation, but done over vhost-user instead. It also uses a chardev to connect to the backend. Unlike vhost-scsi (today), VMs using vhost-user-scsi can be live migrated. To use it, start Qemu with a command line equivalent to: qemu-system-x86_64 \ -chardev socket,id=vus0,path=/tmp/vus.sock \ -device vhost-user-scsi-pci,chardev=vus0,bus=pci.0,addr=... A separate commit presents a sample application linked with libiscsi to provide a backend for vhost-user-scsi. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Message-Id: <1488479153-21203-4-git-send-email-felipe@nutanix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-13hw/misc: add a TMP42{1, 2, 3} device modelCédric Le Goater
Largely inspired by the TMP105 temperature sensor, here is a model for the TMP42{1,2,3} temperature sensors. Specs can be found here : http://www.ti.com/lit/gpn/tmp421 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1496739230-32109-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-05-30Merge remote-tracking branch 'kraxel/tags/pull-usb-20170529-1' into stagingStefan Hajnoczi
usb: depricate legacy options and hmp commands usb: fixes for ehci and hub, split xhci variants # gpg: Signature made Mon 29 May 2017 02:07:17 PM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-usb-20170529-1: ehci: fix frame timer invocation. usb: don't wakeup during coldplug usb-hub: set PORT_STAT_C_SUSPEND on host-initiated wake-up xhci: add CONFIG_USB_XHCI_NEC option xhci: split into multiple files usb: Simplify the parameter parsing of the legacy usb serial device usb: Deprecate HMP commands usb_add and usb_del usb: Deprecate the legacy -usbdevice option ehci: fix overflow in frame timer code Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-29xhci: add CONFIG_USB_XHCI_NEC optionGerd Hoffmann
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451189 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170517103313.8459-2-kraxel@redhat.com
2017-05-19vfio/ccw: vfio based subchannel passthrough driverXiao Feng Ren
We use the IOMMU_TYPE1 of VFIO to realize the subchannels passthrough, implement a vfio based subchannels passthrough driver called "vfio-ccw". Support qemu parameters in the style of: "-device vfio-ccw,sysfsdev=$mdev_file_path,devno=xx.x.xxxx' Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170517004813.58227-8-bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-05-04s390x/3270: Mark non-migratable and enable the deviceJing Liu
Mark 3270 as non-migratable for the experimental stage. Enable the 3270 device so that we can use x3270 client to operate the guest. Run qemu with the arguments: -chardev socket,id=char3270_0,host=0.0.0.0,port=23,nowait,server,tn3270 \ -device x-terminal3270,chardev=char3270_0,devno=fe.0.000a,id=terminal3270_0 \ There are some restrictions for the first stage: We don't support SSL connections, multiple client connections and client resizing. Only tested with the x3270 client. Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-04-26Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170426' ↵Peter Maydell
into staging ppc patch queue 2017-04-26 Here's a respind of my first pull request for qemu-2.10, consisting of assorted patches which have accumulated while qemu-2.9 stabilized. Highlights are: * Rework / cleanup of the XICS interrupt controller * Substantial improvement to the 'powernv' machine type - Includes an MMIO XICS version * POWER9 support improvements - POWER9 guests with KVM - Partial support for POWER9 guests with TCG * IOMMU and VFIO improvements * Assorted minor changes There are several IPMI patches here that aren't usually in my area of maintenance, but there isn't a regular maintainer and these patches are for the benefit of the powernv machine type. This pull request supersedes my 2017-04-26 pull request. This new set fixes a bug in one of the aforementioned IPMI patches which caused clang sanitizer failures (and may have crashed on some libc / host versions). # gpg: Signature made Wed 26 Apr 2017 07:58:10 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.10-20170426: (48 commits) MAINTAINERS: Remove myself from e500 target/ppc: Style fixes e500,book3s: mfspr 259: Register mapped/aliased SPRG3 user read target/ppc: Flush TLB on write to PIDR spapr-cpu-core: Release ICPState object during CPU unrealization ppc/pnv: generate an OEM SEL event on shutdown ppc/pnv: add initial IPMI sensors for the BMC simulator ppc/pnv: populate device tree for IPMI BT devices ppc/pnv: populate device tree for serial devices ppc/pnv: populate device tree for RTC devices ppc/pnv: scan ISA bus to populate device tree ppc/pnv: enable only one LPC bus ppc/pnv: Add support for POWER8+ LPC Controller spapr: remove the 'nr_servers' field from the machine target/ppc: Fix size of struct PPCElfPrstatus ipmi: introduce an ipmi_bmc_gen_event() API ipmi: introduce an ipmi_bmc_sdr_find() API ipmi: provide support for FRUs ipmi: use a file to load SDRs ppc: add IPMI support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' ↵Peter Maydell
into staging Xen 2017/04/21 + fix # gpg: Signature made Tue 25 Apr 2017 19:10:37 BST # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # gpg: aka "Stefano Stabellini <sstabellini@kernel.org>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits) move xen-mapcache.c to hw/i386/xen/ move xen-hvm.c to hw/i386/xen/ move xen-common.c to hw/xen/ add xen-9p-backend to MAINTAINERS under Xen xen/9pfs: build and register Xen 9pfs backend xen/9pfs: send responses back to the frontend xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal xen/9pfs: receive requests from the frontend xen/9pfs: connect to the frontend xen/9pfs: introduce Xen 9pfs backend 9p: introduce a type for the 9p header xen: import ring.h from xen configure: use pkg-config for obtaining xen version xen: additionally restrict xenforeignmemory operations xen: use libxendevice model to restrict operations xen: use 5 digit xen versions xen: use libxendevicemodel when available configure: detect presence of libxendevicemodel xen: create wrappers for all other uses of xc_hvm_XXX() functions xen: rename xen_modified_memory() to xen_hvm_modified_memory() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26ppc: add IPMI supportCédric Le Goater
OpenPOWER systems use a BT device to communicate with the BMC. Provide support for it. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-25move xen-mapcache.c to hw/i386/xen/Anthony Xu
move xen-mapcache.c to hw/i386/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-25Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 25 Apr 2017 12:22:03 BST # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: COLO-compare: Optimize tcp compare trace event COLO-compare: Optimize tcp compare for option field slirp: add a fake NC-SI backend aspeed: add a FTGMAC100 nic net/ftgmac100: add a 'aspeed' property net: add FTGMAC100 support hw/net: add MII definitions colo-compare: Fix old packet check bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24ppc: Add SM501 device in ppc softmmu targets default configsBALATON Zoltan
This is not used by default on any emulated machine yet but it is still useful to have it compiled so it can be added from the command line for clients that can use it (e.g. MorphOS has no driver for any other emulated video cards but can output via SM501) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Acked-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: bf305f36dcde152668cf12438ef983cd09ed2d3f.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24net: add FTGMAC100 supportCédric Le Goater
The FTGMAC100 device is an Ethernet controller with DMA function that can be found on Aspeed SoCs (which include NCSI). It is fully compliant with IEEE 802.3 specification for 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and includes Reduced Media Independent Interface (RMII) and Reduced Gigabit Media Independent Interface (RGMII) interfaces. It adopts an AHB bus interface and integrates a link list DMA engine with direct M-Bus accesses for transmitting and receiving packets. It has independent TX/RX fifos, supports half and full duplex (1000 Mbps mode only supports full duplex), flow control for full duplex and backpressure for half duplex. The FTGMAC100 also implements IP, TCP, UDP checksum offloads and supports IEEE 802.1Q VLAN tag insertion and removal. It offers high-priority transmit queue for QoS and CoS applications This model is backed with a RealTek 8211E PHY which is the chip found on the AST2500 EVB. It is complete enough to satisfy two different Linux drivers and a U-Boot driver. Not supported features are : - IEEE 802.1Q VLAN - High Priority Transmit Queue - Wake-On-LAN functions The code is based on the Coldfire Fast Ethernet Controller model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-03-02ACPI: Add Virtual Machine Generation ID supportBen Warren
This implements the VM Generation ID feature by passing a 128-bit GUID to the guest via a fw_cfg blob. Any time the GUID changes, an ACPI notify event is sent to the guest The user interface is a simple device with one parameter: - guid (string, must be "auto" or in UUID format xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx) Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-28armv7m: Don't put core v7M devices under CONFIG_STELLARISPeter Maydell
The NVIC is a core v7M device that exists for all v7M CPUs; put it under a CONFIG_ARM_V7M rather than hiding it under CONFIG_STELLARIS. (We'll use CONFIG_ARM_V7M for the SysTick device too when we split it out of the NVIC.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org
2017-02-24hw/mips: MIPS Boston board supportPaul Burton
Introduce support for emulating the MIPS Boston development board. The Boston board is built around an FPGA & 3 PCIe controllers, one of which is connected to an Intel EG20T Platform Controller Hub. It is used during the development & debug of new CPUs and the software intended to run on them, and is essentially the successor to the older MIPS Malta board. This patch does not implement the EG20T, instead connecting an already supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough for typical stock Boston software (eg. Linux kernels) to work with hard disks given that both the ICH-9 & EG20T implement the AHCI specification. Boston boards typically boot kernels in the FIT image format, and this patch will treat kernels provided to QEMU as such. When loading a kernel directly, the board code will generate minimal firmware much as the Malta board code does. This firmware will set up the CM, CPC & GIC register base addresses then set argument registers & jump to the kernel entry point. Alternatively, bootloader code may be loaded using the bios argument in which case no firmware will be generated & execution will proceed from the start of the boot code at the default MIPS boot exception vector (offset 0x1fc00000 into (c)kseg1). Currently real Boston boards are always used with FPGA bitfiles that include a Global Interrupt Controller (GIC), so the interrupt configuration is only defined for such cases. Therefore the board will only allow use of CPUs which implement the CPS components, including the GIC, and will otherwise exit with a message. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: isolated boston machine support for mips64el. updated for recent Chardev changes. ignore missing bios/kernel for qtest. added default -drive to if=ide explicitly. changed default memory size into 1G due to make check failure on 32-bit hosts] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-23Revert "hw/mips: MIPS Boston board support"Peter Maydell
This reverts commit d3473e147a754e999718bf6fcb015d9978c6a1ee. This commit creates a board which defaults to having 2GB of RAM. Unfortunately on 32-bit hosts we can't create boards with 2GB of RAM, and so 'make check' fails. I missed this during testing of the merge, unfortunately. Luckily the offending commit is the last one in the merge request, so we can just revert it for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-21hw/mips: MIPS Boston board supportPaul Burton
Introduce support for emulating the MIPS Boston development board. The Boston board is built around an FPGA & 3 PCIe controllers, one of which is connected to an Intel EG20T Platform Controller Hub. It is used during the development & debug of new CPUs and the software intended to run on them, and is essentially the successor to the older MIPS Malta board. This patch does not implement the EG20T, instead connecting an already supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough for typical stock Boston software (eg. Linux kernels) to work with hard disks given that both the ICH-9 & EG20T implement the AHCI specification. Boston boards typically boot kernels in the FIT image format, and this patch will treat kernels provided to QEMU as such. When loading a kernel directly, the board code will generate minimal firmware much as the Malta board code does. This firmware will set up the CM, CPC & GIC register base addresses then set argument registers & jump to the kernel entry point. Alternatively, bootloader code may be loaded using the bios argument in which case no firmware will be generated & execution will proceed from the start of the boot code at the default MIPS boot exception vector (offset 0x1fc00000 into (c)kseg1). Currently real Boston boards are always used with FPGA bitfiles that include a Global Interrupt Controller (GIC), so the interrupt configuration is only defined for such cases. Therefore the board will only allow use of CPUs which implement the CPS components, including the GIC, and will otherwise exit with a message. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: isolated boston machine support for mips64el. updated for recent Chardev changes. ignore missing bios/kernel for qtest. added default -drive to if=ide explicitly] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-14target/openrisc: Rename the cpu from or32 to or1kRichard Henderson
This is in keeping with the toolchain and or1ksim. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-10hw/vfio: Add CONFIG switches for calxeda-xgmac and amd-xgbeThomas Huth
Both devices seem to be specific to the ARM platform. It's confusing for the users if they show up on other target architectures, too (e.g. when the user runs QEMU with "-device ?" to get a list of supported devices). Thus let's introduce proper configuration switches so that the devices are only compiled and included when they are really required. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-02-06Allow ISA bus to be configured outDavid Gibson
Currently, the code to handle the legacy ISA bus is always included in qemu. However there are lots of platforms that don't include ISA legacy devies, and quite a few that have never used ISA legacy devices at all. This patch allows the ISA bus code to be disabled in the configuration for platforms where it doesn't make sense. For now, the default configs are adjusted to include ISA on all platforms including PCI: anything with PCI can at least in principle add an i82378 PCI->ISA bridge. Also, CONFIG_IDE_CORE which is already in pci.mak requires ISA support. We also explicitly enable ISA on some other non-PCI platforms which include ISA devices: moxie, sparc and unicore32. We may want to pare this down in future. The platforms that will lose ISA by default are: cris, lm32, microblazeel, microblaze, openrisc, s390x, tricore, xtensaeb, xtensa. As far as I can tell none of these ever used ISA. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-06Split serial-isa into its own config optionDavid Gibson
At present, the core device model code for 8250-like serial ports (serial.c) and the code for serial ports attached to ISA-style legacy IO (serial-isa.c) are both controlled by the CONFIG_SERIAL variable. There are lots and lots of embedded platforms that have 8250-like serial ports but have never had anything resembling ISA legacy IO. Therefore, split serial-isa into its own CONFIG_SERIAL_ISA option so it can be disabled for platforms where it's not appropriate. For now, I enabled CONFIG_SERIAL_ISA in every default-config where CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best as I can tell, those platforms never used legacy ISA, and also don't include PCI support (which would allow connection of a PCI->ISA bridge and/or a southbridge including legacy ISA serial ports). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-02Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170202' ↵Peter Maydell
into staging ppc patch queue 2017-02-02 This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug. This is a long overdue ppc pull request for qemu-2.9. It's been a long time coming due to some holidays and inconveniently timed problems with testing. So, there's a lot in here: * More POWER9 instruction implementations for TCG * The simpler parts of my CPU compatibility mode cleanup * This changes behaviour to prefer compatibility modes over "raW" mode for new machine type versions * New "40p" machine type which is essentially a modernized and cleaned up "prep". The intention is that it will replace "prep" once it has some more testing and polish. * Add pseries-2.9 machine type * Implement H_SIGNAL_SYS_RESET hypercall * Consolidate the two alternate CPU init paths in pseries by making it always go through CPU core objects to initialize CPU * A number of bugfixes and cleanups * Stop the guest timebase when the guest is stopped under KVM. This makes the guest system clock also stop when paused, which matches the x86 behaviour. * Some preliminary cleanups leading towards implementation of the POWER9 MMU. There are also some changes not strictly related to ppc code, but for its benefit: * Limit the pxi-expander-bridge (PXB) device to x86 guests only (it's essentially a hack to work around historical x86 limitations) * Some additions to the 128-bit math in host_utils, necessary for some of the new instructions. * Revise a number of qtests and enable them for ppc # gpg: Signature made Thu 02 Feb 2017 01:40:16 GMT # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.9-20170202: (107 commits) hw/ppc/pnv: Use error_report instead of hw_error if a ROM file can't be found ppc/kvm: Handle the "family" CPU via alias instead of registering new types target/ppc/mmu_hash64: Fix incorrect shift value in amr calculation target/ppc/mmu_hash64: Fix printing unsigned as signed int tcg/POWER9: NOOP the cp_abort instruction target/ppc/debug: Print LPCR register value if register exists target-ppc: Add xststdc[sp, dp, qp] instructions target-ppc: Add xvtstdc[sp,dp] instructions target-ppc: Add MMU model check for booke machines ppc: switch to constants within BUILD_BUG_ON target/ppc/cpu-models: Fix/remove bad CPU aliases target/ppc: Remove unused POWERPC_FAMILY(POWER) spapr: clock should count only if vm is running ppc: Remove unused function cpu_ppc601_rtc_init() target/ppc: Add pcr_supported to POWER9 cpu class definition powerpc/cpu-models: rename ISAv3.00 logical PVR definition target-ppc: Add xvcv[hpsp, sphp] instructions target-ppc: Add xsmulqp instruction target-ppc: Add xsdivqp instruction target-ppc: Add xscvsdqp and xscvudqp instructions ... # Conflicts: # hw/pci-bridge/Makefile.objs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-01hw/pcie: Introduce a base class for PCI Express Root PortsMarcel Apfelbaum
The 'base' PCI Express Root Port includes the common code to be re-used for all Root Ports implementations. Most of the code was taken from the current implementation of Intel's IOH 3420 Root Port. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-31pxb: Restrict to x86David Gibson
The PCI Expander Bridge (PXB) device is essentially a hack to allow different PCIe devices to be assigned to different NUMA nodes on x86. Each PXB is sort-of a separate PCI host bridge, except that its config space is shared with the config space of the main PCI host bridge, rather than being independent. This is only necessary if the platform doesn't (easily) allow truly independent PCI host bridges. AFAIK that's just x86. This patch makes it possible to configure PXB out of the build, and adjusts the default configs so it's only included on x86 targets. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-31prep: add IBM RS/6000 7020 (40p) machine emulationHervé Poussineau
Machine supports both Open Hack'Ware and OpenBIOS. Open Hack'Ware is the default because OpenBIOS is currently unable to boot PReP boot partitions or PReP kernels. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> [dwg: Correct compile failure with KVM located by Thomas Huth] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31prep: add IBM RS/6000 7020 (40p) memory controllerHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Added CONFIG_RS6000_MC to ppc64 or it breaks testcases] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-24nios2: Add support for Nios-II R1Marek Vasut
Add remaining bits of the Altera NiosII R1 support into qemu, which is documentation, MAINTAINERS file entry, configure bits, arch_init and configuration files for both linux-user (userland binaries) and softmmu (hardware emulation). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Wulff <crwulff@gmail.com> Cc: Jeff Da Silva <jdasilva@altera.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Sandra Loosemore <sandra@codesourcery.com> Cc: Yves Vandervennet <yvanderv@altera.com> Reviewed-by: Alexander Graf <agraf@suse.de> Message-Id: <20170118220146.489-8-marex@denx.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23target-hppa: Add framework and enable compilationRichard Henderson
This is just about the minimum required to enable compilation without actually executing any instructions. This contains the HPPACPU structure and the required callbacks, the gdbstub, the basic translation loop, and a translate_one function that always results in an illegal instruction. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: fix up niagara machineArtyom Tarasenko
Remove the Niagara stub implementation from sun4u.c and add a machine, compatible with Legion simulator from the OpenSPARC T1 project. The machine uses the firmware supplied with the OpenSPARC T1 project, http://download.oracle.com/technetwork/systems/opensparc/OpenSPARCT1_Arch.1.5.tar.bz2 in the directory S10image/, and is able to boot the supplied Solaris 10 image. Note that for compatibility with the naming conventions for SPARC machines the new machine name is lowercase niagara. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-14m68k: Remove PCI and USB from config fileThomas Huth
None of the ColdFire boards that we currently support has a PCI or USB bus (and AFAIK the upcoming q800 machine does not support PCI and USB either), so we do not need these settings the config file. Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20170106083956.53d08923@thl530> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2016-11-15pc: memhp: move nvdimm hotplug out of memory hotplugXiao Guangrong
as they use completely different way to handle hotplug event Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-10-28ppc/pnv: add skeleton PowerNV platformBenjamin Herrenschmidt
The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-21linux-user: disable unicore32 linux-user buildRiku Voipio
In order to cleanup linux-user, we need support for most relatively modern syscalls. unicore32 lacks support for syscalls like epoll_pwait, preventing cleaning up the CONFIG_EPOLL mess. This patch can be reverted when unicore32 starts either supporting the syscalls as defined in mainline kernel, or the oldabi interface gains support for syscalls supported since at kernel 2.6.19 / glibc 2.6 Cc: MPRC <zhangheng@mprc.pku.edu.cn> Cc: Xuetao Guan <gxt@mprc.pku.edu.cn> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-04STM32F2xx: Add the SPI deviceAlistair Francis
Add the STM32F2xx SPI device. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 8197811d5c94f814fa67c6a33ca2f7fd0aa97432.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F2xx: Add the ADC deviceAlistair Francis
Add the STM32F2xx ADC device. This device randomly generates values on each read. This also includes creating a hw/adc directory. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-13default-configs: remove CONFIG_PIIX_PCIDaniel P. Berrange
The CONFIG_PIIX_PCI=y setting was added in commit 70615c38ded2a20ad8282b7dcde95482fc0a7744 Author: Blue Swirl <blauwirbel@gmail.com> Date: Mon Mar 22 20:18:40 2010 +0000 Compile sound devices only once but nothing in that commit, nor anything pre-existing, ever referenced CONFIG_PIIX_PCI. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13default-configs: removed obsolete CONFIG_ISA_MMIODaniel P. Berrange
The use of the CONFIG_ISA_MMIO setting was removed in commit 61fcb628627ea464dc1954f615ae13edfefd284f Author: Paolo Bonzini <pbonzini@redhat.com> Date: Mon Jul 22 15:54:24 2013 +0200 isa_mmio: delete but this commit only removed it from some of the default config files. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13default-configs: remove CONFIG_PAMDaniel P. Berrange
The CONFIG_PAM=y setting was added in commit c0907c9e6417cb959dfd9ef6873221536ec91351 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Tue Feb 5 15:06:20 2013 +0100 hw: move PCI bridges to hw/pci-* or hw/ARCH but nothing in that commit, nor anything pre-existing, ever referenced CONFIG_PAM. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-04dma: Add Xilinx Zynq devcfg device modelAlistair Francis
Add a minimal model for the devcfg device which is part of Zynq. This model supports DMA capabilities and interrupt generation. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 83df49d8fa2d203a421ca71620809e4b04754e65.1467053537.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 21:40:29 +0000