aboutsummaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)Author
2020-10-06dtc: Convert Makefile bits to meson bitsPaolo Bonzini
Build the library via the main meson.build just like for capstone. This improves the current state of affairs in that we will re-link the qemu executables against a changed libfdt.a, which we wouldn't do before-hand, and lets us remove the whole recursive make machinery. Tested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: remove redundant keysPaolo Bonzini
TARGET_BASE_ARCH and TARGET_ABI_DIR are 99% of the time the same as TARGET_ARCH, remove them if so. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: use TARGET_ARCH keyPaolo Bonzini
Replace the individual TARGET_*=y lines with TARGET_ARCH, similar to how TARGET_BASE_ARCH is handled already. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: remove default-configs/devices for user-mode targetsPaolo Bonzini
We no longer need dummy files to detect targets, since default-configs/targets/ exists. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: remove target configurationPaolo Bonzini
The config-target.mak files are small constant, we can therefore just write them down explicitly. This removes a pretty large part of the configure script, including the whole logic to detect which accelerators are supported by each target. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: move files to default-configs/devices/Paolo Bonzini
Make room for target files in default-configs/targets/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-14hw/arm: Add two NPCM7xx-based machinesHavard Skinnemoen
This adds two new machines, both supported by OpenBMC: - npcm750-evb: Nuvoton NPCM750 Evaluation Board. - quanta-gsj: A board with a NPCM730 chip. They rely on the NPCM7xx SoC device to do the heavy lifting. They are almost completely identical at the moment, apart from the SoC type, which currently only changes the reset contents of one register (GCR.MDLR), but they might grow apart a bit more as more functionality is added. Both machines can boot the Linux kernel into /bin/sh. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-6-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-09hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit boardBin Meng
This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-11hw/avr: Add limited support for some Arduino boardsPhilippe Mathieu-Daudé
Arduino boards are build with AVR chipsets. Add some of these boards: - Arduino Duemilanove - Arduino Uno - Arduino Mega For more information: https://www.arduino.cc/en/Main/Products https://store.arduino.cc/arduino-genuino/most-popular [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Joaquin de Andres <me@xcancerberox.com.ar> [thuth: sysbus_init_child_obj() ==> object_initialize_child()] Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-26-huth@tuxfamily.org>
2020-07-11target/avr: Register AVR support with the rest of QEMUMichael Rolnik
Add AVR related definitions into QEMU, make AVR support buildable. [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-23-huth@tuxfamily.org> [PMD: Fixed @avr tag in qapi/machine.json] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-22hw/rx: Add RX GDB simulatorYoshinori Sato
Add the RX machine internally simulated in GDB. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI, renamed CPU -> MCU, device -> microcontroller] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200224141923.82118-18-ysato@users.sourceforge.jp> [PMD: Split of MCU, rename gdbsim, Add gdbsim-r5f562n7/r5f562n8] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-09target/unicore32: Prefer qemu_semihosting_log_out() over cursesPhilippe Mathieu-Daudé
Use the common API for semihosting logging. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200603123754.19059-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-03riscv: Initial commit of OpenTitan machineAlistair Francis
This adds a barebone OpenTitan machine to QEMU. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-05-26hw/mips/fuloong2e: Fix typo in Fuloong machine namePhilippe Mathieu-Daudé
We always miswrote the Fuloong machine... Fix its name. Add an machine alias to the previous name for backward compatibility. Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Message-id: <20200526104726.11273-11-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-05-14ACPI: Build related register address fields via hardware error fw_cfg blobDongjiu Geng
This patch builds error_block_address and read_ack_register fields in hardware errors table , the error_block_address points to Generic Error Status Block(GESB) via bios_linker. The max size for one GESB is 1kb, For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst Now we only support one Error source, if necessary, we can extend to support more. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-19Add rx-softmmuYoshinori Sato
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Squashed patches from Richard Henderson modifying qapi/common.json and tests/machine-none-test.c] Message-Id: <20200224141923.82118-21-ysato@users.sourceforge.jp> [PMD: Added @since 5.0 tag in SysEmuTarget] Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-03-12hw/arm: add Allwinner H3 System-on-ChipNiek Linnenbank
The Allwinner H3 is a System on Chip containing four ARM Cortex A7 processor cores. Features and specifications include DDR2/DDR3 memory, SD/MMC storage cards, 10/100/1000Mbit Ethernet, USB 2.0, HDMI and various I/O modules. This commit adds support for the Allwinner H3 System on Chip. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-2-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05tpm: Separate TPM_TIS and TPM_TIS_ISA configsEric Auger
Let's separate the compilation of tpm_tis_common.c from the compilation of tpm_tis_isa.c The common part will be also compiled along with the tpm_tis_sysbus device. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20200305165149.618-5-eric.auger@redhat.com Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2020-02-21spapr: Add NVDIMM device supportShivaprasad G Bhat
Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm device interface in QEMU to support virtual NVDIMM devices for Power. Create the required DT entries for the device (some entries have dummy values right now). The patch creates the required DT node and sends a hotplug interrupt to the guest. Guest is expected to undertake the normal DR resource add path in response and start issuing PAPR SCM hcalls. The device support is verified based on the machine version unlike x86. This is how it can be used .. Ex : For coldplug, the device to be added in qemu command line as shown below -object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 -device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 For hotplug, the device to be added from monitor as below object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> [Early implementation] Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-17hw/misc: Add the STM32F4xx Sysconfig deviceAlistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 49b01423a09cef2ca832ff73a84a996568f1a8fc.1576658572.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07hw/ppc/Kconfig: Restrict the MPC I2C controller to e500-based platformsPhilippe Mathieu-Daudé
Only the PowerPC e500-based platforms use the MPC I2C controller. Do not build it for the other machines. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191231183216.6781-7-philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-29Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' ↵Peter Maydell
into staging Add Macintosh Quadra 800 machine in hw/m68k # gpg: Signature made Mon 28 Oct 2019 18:14:25 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-branch-pull-request: BootLinuxConsoleTest: Test the Quadra 800 hw/m68k: define Macintosh Quadra 800 hw/m68k: add a dummy SWIM floppy controller hw/m68k: add Nubus macfb video card hw/m68k: add Nubus support hw/m68k: implement ADB bus support for via hw/m68k: add VIA support dp8393x: manage big endian bus esp: add pseudo-DMA as used by Macintosh esp: move get_cmd() post-DMA code to get_cmd_cb() esp: move handle_ti_cmd() cleanup code to esp_do_dma(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-28hw/m68k: add VIA supportLaurent Vivier
Inside the 680x0 Macintosh, VIA (Versatile Interface Adapter) is used to interface the keyboard, Mouse, and real-time clock. It also provides control line for the floppy disk driver, video interface, sound circuitry and serial interface. This implementation is based on the MOS6522 object. Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20191026164546.30020-6-laurent@vivier.eu>
2019-10-26Merge commit 'df84f17' into HEADPaolo Bonzini
This merge fixes a semantic conflict with the trivial tree. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-24Merge remote-tracking branch 'remotes/xtensa/tags/20191023-xtensa' into stagingPeter Maydell
target/xtensa improvements for v4.2: - regenerate and reimport test_mmuhifi_c3 core; - add virt machine. # gpg: Signature made Wed 23 Oct 2019 23:56:42 BST # gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044 # gpg: issuer "jcmvbkbc@gmail.com" # gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown] # gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full] # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full] # Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044 * remotes/xtensa/tags/20191023-xtensa: hw/xtensa: add virt machine target/xtensa: regenerate and re-import test_mmuhifi_c3 core Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-22hw/i386: Introduce the microvm machine typeSergio Lopez
microvm is a machine type inspired by Firecracker and constructed after its machine model. It's a minimalist machine type without PCI nor ACPI support, designed for short-lived guests. microvm also establishes a baseline for benchmarking and optimizing both QEMU and guest operating systems, since it is optimized for both boot time and footprint. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-18hw/xtensa: add virt machineMax Filippov
virt machine is a sim machine with generic PCI host controller. Make common parts of sim machine initialization reusable. Add PCI controller at 0xf0000000 with PIO space at its base address, ECAM space at base address + 1M and MMIO space at base address + 64M. Connect IRQ lines to consecutive CPU external IRQ pins starting from 0. Instantiate network interfaces on virt machine. Xtensa linux kernel configuration virt_defconfig can successfully boot on this machine. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-09-20ipmi: Add an SMBus IPMI interfaceCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-20ipmi: Add PCI IPMI interfacesCorey Minyard
Pretty straightforward, just hook the current KCS and BT code into the PCI system with the proper configuration. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-16hw/i386: Move CONFIG_ACPI_PCI to CONFIG_PCCole Robinson
CONFIG_ACPI_PCI is a hard requirement of acpi-build.c, which is built unconditionally for x86 target. Putting it in default-configs/ suggests that it can be easily disabled, which isn't true. Relocate the symbol with the other acpi-build.c requirements, under 'config PC'. This is similar to what is done for the arm 'virt' machine type and CONFIG_ACPI_PCI Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-Id: <e73e6edff68fd30d69c6a1d02c9ef9192f773c63.1568049871.git.crobinso@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-07m68k: Add NeXTcube framebuffer device emulationThomas Huth
The NeXTcube uses a linear framebuffer with 4 greyscale colors and a fixed resolution of 1120 * 832. This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c and altered to fit the latest interface of the current QEMU (e.g. the device has been "qdev"-ified etc.). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190831074519.32613-2-huth@tuxfamily.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2019-07-03Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jul-02-2019' ↵Peter Maydell
into staging MIPS queue for July 2nd, 2019 # gpg: Signature made Tue 02 Jul 2019 17:09:29 BST # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-jul-02-2019: target/mips: Correct helper for MSA FCLASS.<W|D> instructions target/mips: Unroll loops for MSA float max/min instructions target/mips: Correct comments in msa_helper.c target/mips: Correct comments in translate.c tcg/tests: target/mips: Correct MSA test compilation and execution order tcg/tests: target/mips: Amend MSA integer multiply tests tcg/tests: target/mips: Amend MSA fixed point multiply tests hw/mips: Express dependencies of the r4k platform with Kconfig hw/mips: Express dependencies of the Jazz machine with Kconfig hw/mips: Express dependencies of the MIPSsim machine with Kconfig hw/mips: Explicit the semi-hosting feature is always required tests/machine-none: Test recent MIPS cpus Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-02hw/mips: Express dependencies of the r4k platform with KconfigPhilippe Mathieu-Daudé
This platform use standard PC devices connected to an ISA bus. Networking is provided by a ne2000 chipset. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-5-philmd@redhat.com>
2019-07-02hw/mips: Express dependencies of the Jazz machine with KconfigPhilippe Mathieu-Daudé
The Jazz use the RC4030 Asic to provide an EISA bus and DMA/IRQ. The framebuffer display is managed by a G364, the network card is a Sonic DP83932. A QLogic ESP216 provides a SCSI bus. None, for the both machine variants (PICA-61 and Magnum 4000), the DP83932 chipset is soldered on the board, and is MMIO-mapped (selected via Chip Select). Therefore we have to enforce the 'select' Kconfig rule (we can not use the 'imply' rule helpful when devices are connected on a bus). Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-4-philmd@redhat.com>
2019-07-02hw/mips: Express dependencies of the MIPSsim machine with KconfigPhilippe Mathieu-Daudé
The MIPSsim machine only emulates an 8250 UART and a simple network controller, connected via an ISA bus. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-3-philmd@redhat.com>
2019-07-02hw/mips: Explicit the semi-hosting feature is always requiredPhilippe Mathieu-Daudé
Disabling the semi-hosting feature leads to build failure: LINK mips-softmmu/qemu-system-mips /usr/bin/ld: target/mips/mips-semi.o: in function `helper_do_semihosting': target/mips/mips-semi.c:335: undefined reference to `qemu_semihosting_log_out' /usr/bin/ld: target/mips/mips-semi.c:338: undefined reference to `qemu_semihosting_log_out' collect2: error: ld returned 1 exit status Add a comment to avoid this feature to be disabled. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <20190701112612.14758-2-philmd@redhat.com>
2019-07-01hw/arm: Add arm SBSA reference machine, skeleton partHongbo Zhang
For AArch64, the existing "virt" machine is primarily meant to run on KVM and execute virtualization workloads, but we need an environment as faithful as possible to physical hardware, for supporting firmware and OS development for physical Aarch64 machines. This patch introduces new machine type 'sbsa-ref' with main features: - Based on 'virt' machine type. - A new memory map. - CPU type cortex-a57. - EL2 and EL3 are enabled. - GIC version 3. - System bus AHCI controller. - System bus EHCI controller. - CDROM and hard disc on AHCI bus. - E1000E ethernet card on PCIE bus. - VGA display adaptor on PCIE bus. - No virtio devices. - No fw_cfg device. - No ACPI table supplied. - Only minimal device tree nodes. Arm Trusted Firmware and UEFI porting to this are done accordingly, and the firmware should supply ACPI tables to the guest OS. The minimal device tree nodes supplied by QEMU for this platform are only to pass the dynamic info reflecting command line input to firmware, not for loading the guest OS. To make the review easier, this task is split into two patches, the fundamental skeleton part and the peripheral devices part; this patch is the first part. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Message-id: 1561890034-15921-2-git-send-email-hongbo.zhang@linaro.org [PMM: commit message tweaks; moved some bits between patch 1 and 2 to ensure patch 1 builds cleanly; removed unneeded lines from Kconfig stanza; only provide board for qemu-system-aarch64, not qemu-system-arm; added MAINTAINERS entry] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-29hw/acpi: Consolidate build_mcfg to pci.cWei Yang
Now we have two identical build_mcfg functions. Consolidate them in acpi/pci.c. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> v4: * ACPI_PCI depends on both ACPI and PCI * rebase on latest master, adjust arm Kconfig v3: * adjust changelog based on Igor's suggestion Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-28semihosting: introduce CONFIG_SEMIHOSTINGAlex Bennée
There isn't much point building semihosting for platforms that don't support it. Introduce a new symbol and enable it only for the softmmu targets that need it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13hw/arm: Remove hard-enablement of the remaining PCI devicesThomas Huth
The PCI devices should be pulled in by default if PCI_DEVICES is set, so there is no need anymore to enforce them in the configs file. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the ZynqMP zcu102 machine with KconfigThomas Huth
This cleans up most settings in default-configs/aarch64-softmmu.mak. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the microbit / nrf51 machine with KconfigThomas Huth
Add Kconfig dependencies for the NRF51 / microbit machine. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the remaining IMX boards with KconfigThomas Huth
IMX25, IMX7 and IMX6UL were still missing the Kconfig dependencies. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with KconfigThomas Huth
Add Kconfig dependencies for the emcraft-sf2 machine - we also distinguish between the machine (CONFIG_EMCRAFT_SF2) and the SoC (CONFIG_MSF2) now. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of sabrelite with KconfigThomas Huth
Add Kconfig dependencies for the Sabrelite / iMX6 machine. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of canon-a1100 with KconfigThomas Huth
Add Kconfig dependencies for the DIGIC / canon-a1100 machine. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the raspi machines with KconfigThomas Huth
Most of the code is directly controlled by the CONFIG_RASPI switch, so not much to add here additionally. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the MPS2 boards with KconfigThomas Huth
Add Kconfig dependencies for the mps2-an* machines. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of allwinner / cubieboard with KconfigThomas Huth
Add dependencies for the Cubitech Cubieboard. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of netduino / stm32f2xx with KconfigThomas Huth
Netduino only depends on the stm32f205 SoC which in turn depends on its components. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-24 20:20:17 +0000