aboutsummaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)Author
2019-05-13hw/arm: Remove hard-enablement of the remaining PCI devicesThomas Huth
The PCI devices should be pulled in by default if PCI_DEVICES is set, so there is no need anymore to enforce them in the configs file. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the ZynqMP zcu102 machine with KconfigThomas Huth
This cleans up most settings in default-configs/aarch64-softmmu.mak. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the microbit / nrf51 machine with KconfigThomas Huth
Add Kconfig dependencies for the NRF51 / microbit machine. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the remaining IMX boards with KconfigThomas Huth
IMX25, IMX7 and IMX6UL were still missing the Kconfig dependencies. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with KconfigThomas Huth
Add Kconfig dependencies for the emcraft-sf2 machine - we also distinguish between the machine (CONFIG_EMCRAFT_SF2) and the SoC (CONFIG_MSF2) now. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of sabrelite with KconfigThomas Huth
Add Kconfig dependencies for the Sabrelite / iMX6 machine. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of canon-a1100 with KconfigThomas Huth
Add Kconfig dependencies for the DIGIC / canon-a1100 machine. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the raspi machines with KconfigThomas Huth
Most of the code is directly controlled by the CONFIG_RASPI switch, so not much to add here additionally. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the MPS2 boards with KconfigThomas Huth
Add Kconfig dependencies for the mps2-an* machines. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of allwinner / cubieboard with KconfigThomas Huth
Add dependencies for the Cubitech Cubieboard. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of netduino / stm32f2xx with KconfigThomas Huth
Netduino only depends on the stm32f205 SoC which in turn depends on its components. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the virt machine with KconfigThomas Huth
Dependencies have been determined by looking at hw/arm/virt.c Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the aspeed boards with KconfigThomas Huth
Dependencies have been determined by looking at hw/arm/aspeed.c Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of collie with KconfigThomas Huth
Add Kconfig dependencies for the Strongarm collie machine. This patch is based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of xilinx-zynq with KconfigThomas Huth
Add Kconfig dependencies for the xilinx-zynq-a9 board. This patch is based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the PXA2xx machines with KconfigThomas Huth
Add Kconfig dependencies for the PXA2xx machines (akita, borzoi, connex and verdex gumstix, tosa, mainstone, spitz, terrier and z2). This patch is based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of realview, versatile and vexpress with KconfigThomas Huth
This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of stellaris with KconfigThomas Huth
This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the OMAP machines with KconfigThomas Huth
Add Kconfig dependencies for the OMAP machines (cheetah, n800, n810, sx1 and sx1-v1). This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of musicpal with KconfigThomas Huth
This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the fsl-imx31 machine with KconfigThomas Huth
Add Kconfig dependencies for the fsl-imx31 / kzm machine. This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of integratorcp with KconfigThomas Huth
This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the highbank machines with KconfigThomas Huth
Add Kconfig dependencies for the highbank machine (and the midway machine). This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-13hw/arm: Express dependencies of the exynos machines with KconfigThomas Huth
Add Kconfig dependencies for the Exynos-related boards (nuri and smdkc210). This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-29Add generic Nios II board.Sandra Loosemore
This patch adds support for a generic MMU-less Nios II board that can be used e.g. for bare-metal compiler testing with the linker script and startup code provided by libgloss. Nios II booting is also tweaked so that bare-metal binaries start executing in RAM starting at 0x00000000, rather than an alias at 0xc0000000, which allows features such as unwinding to work when binaries are linked to start at the beginning of the address space. The generic_nommu.c parts are based on code by Andrew Jenner, which was in turn based on code by Marek Vasut. Originally by Marek Vasut and Andrew Jenner. Signed-off-by: Sandra Loosemore <sandra@codesourcery.com> Signed-off-by: Julian Brown <julian@codesourcery.com> Signed-off-by: Andrew Jenner <andrew@codesourcery.com> Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1554321185-2825-2-git-send-email-sandra@codesourcery.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Kconfig improvements (msi_nonbroken, imply for default PCI devices) * intel-iommu: sharing passthrough FlatViews (Peter) * Fix for SEV with VFIO (Brijesh) * Allow compilation without CONFIG_PARALLEL (Thomas) # gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (23 commits) virtio-vga: only enable for specific boards config-all-devices.mak: rebuild on reconfigure minikconf: fix parser typo intel-iommu: optimize nodmar memory regions test-announce-self: convert to qgraph hw/alpha/Kconfig: DP264 hardware requires e1000 network card hw/hppa/Kconfig: Dino board requires e1000 network card hw/sh4/Kconfig: r2d machine requires the rtl8139 network card hw/ppc/Kconfig: e500 based machines require virtio-net-pci device hw/ppc/Kconfig: Bamboo machine requires e1000 network card hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices hw/mips/Kconfig: Malta machine requires the pcnet network card hw/i386/Kconfig: enable devices that can be created by default hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI hw/isa/Kconfig: i82378 SuperIO requires PC speaker device prep: do not select I82374 hw/i386/Kconfig: PC uses I8257, not I82374 hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL target/i386: sev: Do not pin the ram device memory region memory: Fix the memory region type assignment order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/rdma/Makefile.objs # hw/riscv/sifive_plic.c
2019-03-25target/arm: add PCI_TESTDEV back to default configAndrew Jones
In the kconfig shuffle arm lost pci-testdev which is used by kvm-unit-tests. Let's add it back. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20190322163059.9716-1-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-20hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devicesPhilippe Mathieu-Daudé
This fixes when configuring with --without-default-devices: $ qemu-system-mips64el -bios /dev/null -M fulong2e qemu-system-mips64el: Unknown device 'ati-vga' for bus 'PCI' Aborted (core dumped) (gdb) bt #0 0x00007ffff5a2753f in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007ffff5a11895 in __GI_abort () at abort.c:79 #2 0x00005555558768d3 in qdev_create (bus=bus@entry=0x5555562664b0, name=name@entry=0x555555b24efb "ati-vga") at hw/core/qdev.c:131 #3 0x00005555558d15e1 in pci_create_multifunction (bus=bus@entry=0x5555562664b0, devfn=devfn@entry=-1, multifunction=multifunction@entry=false, name=name@entry=0x555555b24efb "ati-vga") at hw/pci/pci.c:2104 #4 0x00005555558d1a7a in pci_create (bus=bus@entry=0x5555562664b0, devfn=devfn@entry=-1, name=name@entry=0x555555b24efb "ati-vga") at hw/pci/pci.c:2121 #5 0x0000555555763081 in mips_fulong2e_init (machine=<optimized out>) at hw/mips/mips_fulong2e.c:352 #6 0x000055555587e23b in machine_run_board_init (machine=0x5555560b2000) at hw/core/machine.c:1030 #7 0x00005555556cbea2 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4463 And then: $ qemu-system-mips64el -bios /dev/null -M fulong2e qemu-system-mips64el: Unsupported NIC model: rtl8139 Fixes: 862b4a291dc and 7c28b925b7e Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190316200818.8265-8-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-20hw/mips/Kconfig: Malta machine requires the pcnet network cardPhilippe Mathieu-Daudé
This fixes when configuring with --without-default-devices: $ qemu-system-mips64 -bios /dev/null -M malta qemu-system-mips64: Unsupported NIC model: pcnet Fixes: 7c28b925b7e Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190316200818.8265-7-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-12PPC: E500: Add FSL I2C controller and integrate RTC with itAndrew Randrianasulu
Original commit message: This patch adds an emulation model for i2c controller found on most of the FSL SoCs. It also integrates the RTC (ds1338) that sits on the i2c Bus with e500 machine model. Patch was originally written by Amit Singh Tomar <amit.tomar@freescale.com> see http://patchwork.ozlabs.org/patch/431475/ I only fixed it enough for application on top of current qemu master 20b084c4b1401b7f8fbc385649d48c67b6f43d44, and hopefully fixed checkpatch errors Tested by booting Linux kernel 4.20.12. Now e500 machine doesn't need network time protocol daemon because it will have working RTC (before all timestamps on files were from 2016) Signed-off-by: Amit Singh Tomar <amit.tomar@freescale.com> Signed-off-by: Andrew Randrianasulu <randrianasulu@gmail.com> Message-Id: <20190306102812.28972-1-randrianasulu@gmail.com> [dwg: Add Kconfig stanza to define the new symbol, update MAINTAINERS] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-07xtensa-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07unicore32-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07sparc64-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07sparc-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07sh4-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Note that USB_OHCI was missing (it was brought in via pci.mak, but r2d needs the sysbus version) and SERIAL is not used. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07s390x: express dependencies with KconfigThomas Huth
Instead of hard-coding all config switches in the config file default-configs/s390x-softmmu.mak, let's use the new Kconfig files to express the necessary dependencies: The S390_CCW_VIRTIO config switch for the "s390-ccw-virtio" machine now selects all non-optional devices. And since we already have the VIRTIO_PCI and VIRTIO_MMIO config switches for the other two virtio transports, this patch also introduces a new config switch VIRTIO_CCW for the third, s390x-specific virtio transport, so that all three virtio transports are now handled in the same way. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07riscv-softmmu.mak: replace CONFIG_* with Kconfig "select" directivesPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07or1k-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07nios2-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07moxie-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Moxie does not use VGA, ISA or RTC, and only has a memory-mapped serial port. Adjust for the correct dependencies. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07microblaze-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07m68k-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07lm32-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07hppa-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Note that the Dino board uses a memory mapped 16550 UART and therefore only CONFIG_SERIAL is needed, not CONFIG_SERIAL_ISA. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07cris-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07alpha-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc: Express dependencies of the embedded machines with kconfigThomas Huth
This makes it much easier if the users want to disable some of the embedded machines for their builds. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc: Express dependencies of the Sam460EX machines with kconfigThomas Huth
Most of the dependencies are now directly selected by the SAM460EX switch. We can drop CONFIG_VGA_CIRRUS since this device is already selected automatically when CONFIG_PCI_DEVICES is set. Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc: Express dependencies of the Mac machines with kconfigThomas Huth
This will make it for example easier if the users want to disable one of the two machines for their builds. Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc: Express dependencies of the 'prep' and '40p' machines with kconfigThomas Huth
Select the required devices in hw/ppc/Kconfig instead, so that ppc-softmmu.mak only contains the user-selectable PREP switch. Plug-in devices like NE2000_ISA are pulled in automatically by the Kconfig build system now. Cc: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 11:56:19 +0000