aboutsummaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)Author
2021-05-13Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2021-05-12' into ↵Peter Maydell
staging Miscellaneous patches for 2021-05-12 # gpg: Signature made Wed 12 May 2021 17:22:15 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-misc-2021-05-12: Drop the deprecated unicore32 target Drop the deprecated lm32 target block: Drop the sheepdog block driver Remove the deprecated moxie target monitor/qmp: fix race on CHR_EVENT_CLOSED without OOB Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-12Drop the deprecated unicore32 targetMarkus Armbruster
Target unicore32 was deprecated in commit 8e4ff4a8d2b, v5.2.0. See there for rationale. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-3-armbru@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-05-12Remove the deprecated moxie targetThomas Huth
There are no known users of this CPU anymore, and there are no binaries available online which could be used for regression tests, so the code has likely completely bit-rotten already. It's been marked as deprecated since two releases now and nobody spoke up that there is still a need to keep it, thus let's remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210430160355.698194-1-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Commit message typos fixed, trivial conflicts resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-05-11riscv: Add initial support for Shakti C machineVijai Kumar K
Add support for emulating Shakti reference platform based on C-class running on arty-100T board. https://gitlab.com/shaktiproject/cores/shakti-soc/-/blob/master/README.rst Signed-off-by: Vijai Kumar K <vijai@behindbytes.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210401181457.73039-3-vijai@behindbytes.com [Changes by AF: - Check for mstate->firmware before loading it ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-04hw/ppc: Add emulation of Genesi/bPlan Pegasos IIBALATON Zoltan
Add new machine called pegasos2 emulating the Genesi/bPlan Pegasos II, a PowerPC board based on the Marvell MV64361 system controller and the VIA VT8231 integrated south bridge/superio chips. It can run Linux, AmigaOS and a wide range of MorphOS versions. Currently a firmware ROM image is needed to boot and only MorphOS has a video driver to produce graphics output. Linux could work too but distros that supported this machine don't include usual video drivers so those only run with serial console for now. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <30cbfb9cbe6f46a1e15a69a75fac45ac39340122.1616680239.git.balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-15m68k: add Virtual M68k MachineLaurent Vivier
The machine is based on Goldfish interfaces defined by Google for Android simulator. It uses Goldfish-rtc (timer and RTC), Goldfish-pic (PIC) and Goldfish-tty (for serial port and early tty). The machine is created with 128 virtio-mmio bus, and they can be used to use serial console, GPU, disk, NIC, HID, ... Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-6-laurent@vivier.eu>
2021-03-14tricore: added triboard with tc27x_socAndreas Konopik
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Andreas Konopik <andreas.konopik@efs-auto.de> Signed-off-by: David Brenken <david.brenken@efs-auto.de> Signed-off-by: Georg Hofstetter <georg.hofstetter@efs-auto.de> Signed-off-by: Robert Rasche <robert.rasche@efs-auto.de> Signed-off-by: Lars Biermanski <lars.biermanski@efs-auto.de> Message-Id: <20201109165055.10508-2-david.brenken@efs-auto.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2021-03-11Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-09hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boardsPhilippe Mathieu-Daudé
We want to be able to use the 'LM32' config for architecture specific features. Introduce CONFIG_LM32_EVR to select the lm32-evr / lm32-uclinux boards. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210221225626.2589247-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09Remove deprecated target tilegxThomas Huth
TILE-Gx was only implemented in linux-user mode, but support for this CPU was removed from the upstream Linux kernel in 2018, and it has also been dropped from glibc, so there is no new Linux development taking place with this architecture. For running the old binaries, users can simply use older versions of QEMU. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210224183952.80463-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-02-18Hexagon build infrastructureTaylor Simpson
Add file to default-configs Add hexagon to meson.build Add hexagon to target/meson.build Add target/hexagon/meson.build Change scripts/qemu-binfmt-conf.sh We can build a hexagon-linux-user target and run programs on the Hexagon scalar core. With hexagon-linux-clang installed, "make check-tcg" will pass. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1612763186-18161-35-git-send-email-tsimpson@quicinc.com> [rth: Use top-level python variable] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-01-18Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-and-misc-180121-2' into staging Testing, gdbstub and semihosting patches: - clean-ups to docker images - drop duplicate jobs from shippable - prettier tag generation (+gtags) - generate browsable source tree - more Travis->GitLab migrations - fix checkpatch to deal with commits - gate gdbstub tests on 8.3.1, expand tests - support Xfer:auxv:read gdb packet - better gdbstub cleanup - use GDB's SVE register layout - make arm-compat-semihosting common - add riscv semihosting support - add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting # gpg: Signature made Mon 18 Jan 2021 10:09:11 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-and-misc-180121-2: (30 commits) semihosting: Implement SYS_ISERROR semihosting: Implement SYS_TMPNAM semihosting: Implement SYS_ELAPSED and SYS_TICKFREQ riscv: Add semihosting support for user mode riscv: Add semihosting support semihosting: Support SYS_HEAPINFO when env->boot_info is not set semihosting: Change internal common-semi interfaces to use CPUState * semihosting: Change common-semi API to be architecture-independent semihosting: Move ARM semihosting code to shared directories target/arm: use official org.gnu.gdb.aarch64.sve layout for registers gdbstub: ensure we clean-up when terminated gdbstub: drop gdbserver_cleanup in favour of gdb_exit gdbstub: drop CPUEnv from gdb_exit() gdbstub: add support to Xfer:auxv:read: packet gdbstub: implement a softmmu based test Revert "tests/tcg/multiarch/Makefile.target: Disable run-gdbstub-sha1 test" configure: gate our use of GDB to 8.3.1 or above test/guest-debug: echo QEMU command as well scripts/checkpatch.pl: fix git-show invocation to include diffstat gitlab: migrate the minimal tools and unit tests from Travis ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # default-configs/targets/riscv32-linux-user.mak # default-configs/targets/riscv64-linux-user.mak
2021-01-18riscv: Add semihosting supportKeith Packard
Adapt the arm semihosting support code for RISCV. This implementation is based on the standard for RISC-V semihosting version 0.2 as documented in https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2 Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210107170717.2098982-6-keithp@keithp.com> Message-Id: <20210108224256.2321-17-alex.bennee@linaro.org>
2021-01-18semihosting: Move ARM semihosting code to shared directoriesKeith Packard
This commit renames two files which provide ARM semihosting support so that they can be shared by other architectures: 1. target/arm/arm-semi.c -> hw/semihosting/common-semi.c 2. linux-user/arm/semihost.c -> linux-user/semihost.c The build system was modified use a new config variable, CONFIG_ARM_COMPATIBLE_SEMIHOSTING, which has been added to the ARM softmmu and linux-user default configs. The contents of the source files has not been changed in this patch. Signed-off-by: Keith Packard <keithp@keithp.com> [AJB: rename arm-compat-semi, select SEMIHOSTING] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210107170717.2098982-2-keithp@keithp.com> Message-Id: <20210108224256.2321-13-alex.bennee@linaro.org>
2021-01-16target/riscv: Remove built-in GDB XML files for CSRsBin Meng
Now that we have switched to generate the RISC-V CSR XML dynamically, remove the built-in hardcoded XML files. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210116054123.5457-3-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-01-04hw/mips: Add Loongson-3 machine supportHuacai Chen
Add Loongson-3 based machine support, it use liointc as the interrupt controler and use GPEX as the pci controller. Currently it can work with both TCG and KVM. As the machine model is not based on any exiting physical hardware, the name of the machine is "loongson3-virt". It may be superseded in future by a real machine model. If this happens, then a regular deprecation procedure shall occur for "loongson3-virt" machine. We now already have a full functional Linux kernel (based on Linux-5.4.x LTS) here: https://github.com/chenhuacai/linux Of course the upstream kernel is also usable (the kvm host side and guest side have both been upstream in Linux-5.9): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git How to use QEMU/Loongson-3? 1, Download kernel source from the above URL; 2, Build a kernel with arch/mips/configs/loongson3_defconfig; 3, Boot a Loongson-3A4000 host with this kernel (for KVM mode); 4, Build QEMU-master with this patchset; 5, modprobe kvm (only necessary for KVM mode); 6, Use QEMU with TCG: qemu-system-mips64el -M loongson3-virt,accel=tcg -cpu Loongson-3A1000 -kernel <path_to_kernel> -append ... Use QEMU with KVM: qemu-system-mips64el -M loongson3-virt,accel=kvm -cpu Loongson-3A4000 -kernel <path_to_kernel> -append ... The "-cpu" parameter is optional here and QEMU will use the correct type for TCG/KVM automatically. Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20201221110538.3186646-5-chenhuacai@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Set TYPE_LOONGSON_MACHINE instance_size in TypeInfo, select FW_CFG_MIPS in Kconfig] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-11-03hw/mips: Remove the 'r4k' machinePhilippe Mathieu-Daudé
We deprecated the support for the 'r4k' machine for the 5.0 release (commit d32dc61421), which means that our deprecation policy allows us to drop it in release 5.2. Remove the code. To repeat the rationale from the deprecation note: - this virtual machine has no specification - the Linux kernel dropped support for it 10 years ago Users are recommended to use the Malta board instead. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> ACKed-by: Peter Krempa <pkrempa@redhat.com> Message-Id: <20201102201311.2220005-1-f4bug@amsat.org>
2020-10-20hw/arm: Restrict APEI tables generation to the 'virt' machinePhilippe Mathieu-Daudé
While APEI is a generic ACPI feature (usable by X86 and ARM64), only the 'virt' machine uses it, by enabling the RAS Virtualization. See commit 2afa8c8519: "hw/arm/virt: Introduce a RAS machine option"). Restrict the APEI tables generation code to the single user: the virt machine. If another machine wants to use it, it simply has to 'select ACPI_APEI' in its Kconfig. Fixes: aa16508f1d ("ACPI: Build related register address fields via hardware error fw_cfg blob") Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20201008161414.2672569-1-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-06dtc: Convert Makefile bits to meson bitsPaolo Bonzini
Build the library via the main meson.build just like for capstone. This improves the current state of affairs in that we will re-link the qemu executables against a changed libfdt.a, which we wouldn't do before-hand, and lets us remove the whole recursive make machinery. Tested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: remove redundant keysPaolo Bonzini
TARGET_BASE_ARCH and TARGET_ABI_DIR are 99% of the time the same as TARGET_ARCH, remove them if so. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: use TARGET_ARCH keyPaolo Bonzini
Replace the individual TARGET_*=y lines with TARGET_ARCH, similar to how TARGET_BASE_ARCH is handled already. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: remove default-configs/devices for user-mode targetsPaolo Bonzini
We no longer need dummy files to detect targets, since default-configs/targets/ exists. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03configure: remove target configurationPaolo Bonzini
The config-target.mak files are small constant, we can therefore just write them down explicitly. This removes a pretty large part of the configure script, including the whole logic to detect which accelerators are supported by each target. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03default-configs: move files to default-configs/devices/Paolo Bonzini
Make room for target files in default-configs/targets/ Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-14hw/arm: Add two NPCM7xx-based machinesHavard Skinnemoen
This adds two new machines, both supported by OpenBMC: - npcm750-evb: Nuvoton NPCM750 Evaluation Board. - quanta-gsj: A board with a NPCM730 chip. They rely on the NPCM7xx SoC device to do the heavy lifting. They are almost completely identical at the moment, apart from the SoC type, which currently only changes the reset contents of one register (GCR.MDLR), but they might grow apart a bit more as more functionality is added. Both machines can boot the Linux kernel into /bin/sh. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-6-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-09hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit boardBin Meng
This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-11hw/avr: Add limited support for some Arduino boardsPhilippe Mathieu-Daudé
Arduino boards are build with AVR chipsets. Add some of these boards: - Arduino Duemilanove - Arduino Uno - Arduino Mega For more information: https://www.arduino.cc/en/Main/Products https://store.arduino.cc/arduino-genuino/most-popular [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Joaquin de Andres <me@xcancerberox.com.ar> [thuth: sysbus_init_child_obj() ==> object_initialize_child()] Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-26-huth@tuxfamily.org>
2020-07-11target/avr: Register AVR support with the rest of QEMUMichael Rolnik
Add AVR related definitions into QEMU, make AVR support buildable. [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-23-huth@tuxfamily.org> [PMD: Fixed @avr tag in qapi/machine.json] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-22hw/rx: Add RX GDB simulatorYoshinori Sato
Add the RX machine internally simulated in GDB. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI, renamed CPU -> MCU, device -> microcontroller] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200224141923.82118-18-ysato@users.sourceforge.jp> [PMD: Split of MCU, rename gdbsim, Add gdbsim-r5f562n7/r5f562n8] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-09target/unicore32: Prefer qemu_semihosting_log_out() over cursesPhilippe Mathieu-Daudé
Use the common API for semihosting logging. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200603123754.19059-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-06-03riscv: Initial commit of OpenTitan machineAlistair Francis
This adds a barebone OpenTitan machine to QEMU. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-05-26hw/mips/fuloong2e: Fix typo in Fuloong machine namePhilippe Mathieu-Daudé
We always miswrote the Fuloong machine... Fix its name. Add an machine alias to the previous name for backward compatibility. Suggested-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Message-id: <20200526104726.11273-11-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-05-14ACPI: Build related register address fields via hardware error fw_cfg blobDongjiu Geng
This patch builds error_block_address and read_ack_register fields in hardware errors table , the error_block_address points to Generic Error Status Block(GESB) via bios_linker. The max size for one GESB is 1kb, For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst Now we only support one Error source, if necessary, we can extend to support more. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-19Add rx-softmmuYoshinori Sato
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Squashed patches from Richard Henderson modifying qapi/common.json and tests/machine-none-test.c] Message-Id: <20200224141923.82118-21-ysato@users.sourceforge.jp> [PMD: Added @since 5.0 tag in SysEmuTarget] Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-03-12hw/arm: add Allwinner H3 System-on-ChipNiek Linnenbank
The Allwinner H3 is a System on Chip containing four ARM Cortex A7 processor cores. Features and specifications include DDR2/DDR3 memory, SD/MMC storage cards, 10/100/1000Mbit Ethernet, USB 2.0, HDMI and various I/O modules. This commit adds support for the Allwinner H3 System on Chip. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-2-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-05tpm: Separate TPM_TIS and TPM_TIS_ISA configsEric Auger
Let's separate the compilation of tpm_tis_common.c from the compilation of tpm_tis_isa.c The common part will be also compiled along with the tpm_tis_sysbus device. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20200305165149.618-5-eric.auger@redhat.com Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2020-02-21spapr: Add NVDIMM device supportShivaprasad G Bhat
Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm device interface in QEMU to support virtual NVDIMM devices for Power. Create the required DT entries for the device (some entries have dummy values right now). The patch creates the required DT node and sends a hotplug interrupt to the guest. Guest is expected to undertake the normal DR resource add path in response and start issuing PAPR SCM hcalls. The device support is verified based on the machine version unlike x86. This is how it can be used .. Ex : For coldplug, the device to be added in qemu command line as shown below -object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 -device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 For hotplug, the device to be added from monitor as below object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> [Early implementation] Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-17hw/misc: Add the STM32F4xx Sysconfig deviceAlistair Francis
Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 49b01423a09cef2ca832ff73a84a996568f1a8fc.1576658572.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07hw/ppc/Kconfig: Restrict the MPC I2C controller to e500-based platformsPhilippe Mathieu-Daudé
Only the PowerPC e500-based platforms use the MPC I2C controller. Do not build it for the other machines. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191231183216.6781-7-philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-29Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' ↵Peter Maydell
into staging Add Macintosh Quadra 800 machine in hw/m68k # gpg: Signature made Mon 28 Oct 2019 18:14:25 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-branch-pull-request: BootLinuxConsoleTest: Test the Quadra 800 hw/m68k: define Macintosh Quadra 800 hw/m68k: add a dummy SWIM floppy controller hw/m68k: add Nubus macfb video card hw/m68k: add Nubus support hw/m68k: implement ADB bus support for via hw/m68k: add VIA support dp8393x: manage big endian bus esp: add pseudo-DMA as used by Macintosh esp: move get_cmd() post-DMA code to get_cmd_cb() esp: move handle_ti_cmd() cleanup code to esp_do_dma(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-28hw/m68k: add VIA supportLaurent Vivier
Inside the 680x0 Macintosh, VIA (Versatile Interface Adapter) is used to interface the keyboard, Mouse, and real-time clock. It also provides control line for the floppy disk driver, video interface, sound circuitry and serial interface. This implementation is based on the MOS6522 object. Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20191026164546.30020-6-laurent@vivier.eu>
2019-10-26Merge commit 'df84f17' into HEADPaolo Bonzini
This merge fixes a semantic conflict with the trivial tree. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-24Merge remote-tracking branch 'remotes/xtensa/tags/20191023-xtensa' into stagingPeter Maydell
target/xtensa improvements for v4.2: - regenerate and reimport test_mmuhifi_c3 core; - add virt machine. # gpg: Signature made Wed 23 Oct 2019 23:56:42 BST # gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044 # gpg: issuer "jcmvbkbc@gmail.com" # gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown] # gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full] # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full] # Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044 * remotes/xtensa/tags/20191023-xtensa: hw/xtensa: add virt machine target/xtensa: regenerate and re-import test_mmuhifi_c3 core Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-22hw/i386: Introduce the microvm machine typeSergio Lopez
microvm is a machine type inspired by Firecracker and constructed after its machine model. It's a minimalist machine type without PCI nor ACPI support, designed for short-lived guests. microvm also establishes a baseline for benchmarking and optimizing both QEMU and guest operating systems, since it is optimized for both boot time and footprint. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-18hw/xtensa: add virt machineMax Filippov
virt machine is a sim machine with generic PCI host controller. Make common parts of sim machine initialization reusable. Add PCI controller at 0xf0000000 with PIO space at its base address, ECAM space at base address + 1M and MMIO space at base address + 64M. Connect IRQ lines to consecutive CPU external IRQ pins starting from 0. Instantiate network interfaces on virt machine. Xtensa linux kernel configuration virt_defconfig can successfully boot on this machine. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-09-20ipmi: Add an SMBus IPMI interfaceCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-20ipmi: Add PCI IPMI interfacesCorey Minyard
Pretty straightforward, just hook the current KCS and BT code into the PCI system with the proper configuration. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-16hw/i386: Move CONFIG_ACPI_PCI to CONFIG_PCCole Robinson
CONFIG_ACPI_PCI is a hard requirement of acpi-build.c, which is built unconditionally for x86 target. Putting it in default-configs/ suggests that it can be easily disabled, which isn't true. Relocate the symbol with the other acpi-build.c requirements, under 'config PC'. This is similar to what is done for the arm 'virt' machine type and CONFIG_ACPI_PCI Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-Id: <e73e6edff68fd30d69c6a1d02c9ef9192f773c63.1568049871.git.crobinso@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-07m68k: Add NeXTcube framebuffer device emulationThomas Huth
The NeXTcube uses a linear framebuffer with 4 greyscale colors and a fixed resolution of 1120 * 832. This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c and altered to fit the latest interface of the current QEMU (e.g. the device has been "qdev"-ified etc.). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190831074519.32613-2-huth@tuxfamily.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-18 15:03:17 +0000