aboutsummaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)Author
2017-03-02ACPI: Add Virtual Machine Generation ID supportBen Warren
This implements the VM Generation ID feature by passing a 128-bit GUID to the guest via a fw_cfg blob. Any time the GUID changes, an ACPI notify event is sent to the guest The user interface is a simple device with one parameter: - guid (string, must be "auto" or in UUID format xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx) Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-28armv7m: Don't put core v7M devices under CONFIG_STELLARISPeter Maydell
The NVIC is a core v7M device that exists for all v7M CPUs; put it under a CONFIG_ARM_V7M rather than hiding it under CONFIG_STELLARIS. (We'll use CONFIG_ARM_V7M for the SysTick device too when we split it out of the NVIC.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org
2017-02-24hw/mips: MIPS Boston board supportPaul Burton
Introduce support for emulating the MIPS Boston development board. The Boston board is built around an FPGA & 3 PCIe controllers, one of which is connected to an Intel EG20T Platform Controller Hub. It is used during the development & debug of new CPUs and the software intended to run on them, and is essentially the successor to the older MIPS Malta board. This patch does not implement the EG20T, instead connecting an already supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough for typical stock Boston software (eg. Linux kernels) to work with hard disks given that both the ICH-9 & EG20T implement the AHCI specification. Boston boards typically boot kernels in the FIT image format, and this patch will treat kernels provided to QEMU as such. When loading a kernel directly, the board code will generate minimal firmware much as the Malta board code does. This firmware will set up the CM, CPC & GIC register base addresses then set argument registers & jump to the kernel entry point. Alternatively, bootloader code may be loaded using the bios argument in which case no firmware will be generated & execution will proceed from the start of the boot code at the default MIPS boot exception vector (offset 0x1fc00000 into (c)kseg1). Currently real Boston boards are always used with FPGA bitfiles that include a Global Interrupt Controller (GIC), so the interrupt configuration is only defined for such cases. Therefore the board will only allow use of CPUs which implement the CPS components, including the GIC, and will otherwise exit with a message. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: isolated boston machine support for mips64el. updated for recent Chardev changes. ignore missing bios/kernel for qtest. added default -drive to if=ide explicitly. changed default memory size into 1G due to make check failure on 32-bit hosts] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-23Revert "hw/mips: MIPS Boston board support"Peter Maydell
This reverts commit d3473e147a754e999718bf6fcb015d9978c6a1ee. This commit creates a board which defaults to having 2GB of RAM. Unfortunately on 32-bit hosts we can't create boards with 2GB of RAM, and so 'make check' fails. I missed this during testing of the merge, unfortunately. Luckily the offending commit is the last one in the merge request, so we can just revert it for now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-21hw/mips: MIPS Boston board supportPaul Burton
Introduce support for emulating the MIPS Boston development board. The Boston board is built around an FPGA & 3 PCIe controllers, one of which is connected to an Intel EG20T Platform Controller Hub. It is used during the development & debug of new CPUs and the software intended to run on them, and is essentially the successor to the older MIPS Malta board. This patch does not implement the EG20T, instead connecting an already supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough for typical stock Boston software (eg. Linux kernels) to work with hard disks given that both the ICH-9 & EG20T implement the AHCI specification. Boston boards typically boot kernels in the FIT image format, and this patch will treat kernels provided to QEMU as such. When loading a kernel directly, the board code will generate minimal firmware much as the Malta board code does. This firmware will set up the CM, CPC & GIC register base addresses then set argument registers & jump to the kernel entry point. Alternatively, bootloader code may be loaded using the bios argument in which case no firmware will be generated & execution will proceed from the start of the boot code at the default MIPS boot exception vector (offset 0x1fc00000 into (c)kseg1). Currently real Boston boards are always used with FPGA bitfiles that include a Global Interrupt Controller (GIC), so the interrupt configuration is only defined for such cases. Therefore the board will only allow use of CPUs which implement the CPS components, including the GIC, and will otherwise exit with a message. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [yongbok.kim@imgtec.com: isolated boston machine support for mips64el. updated for recent Chardev changes. ignore missing bios/kernel for qtest. added default -drive to if=ide explicitly] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2017-02-14target/openrisc: Rename the cpu from or32 to or1kRichard Henderson
This is in keeping with the toolchain and or1ksim. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-02-10hw/vfio: Add CONFIG switches for calxeda-xgmac and amd-xgbeThomas Huth
Both devices seem to be specific to the ARM platform. It's confusing for the users if they show up on other target architectures, too (e.g. when the user runs QEMU with "-device ?" to get a list of supported devices). Thus let's introduce proper configuration switches so that the devices are only compiled and included when they are really required. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-02-06Allow ISA bus to be configured outDavid Gibson
Currently, the code to handle the legacy ISA bus is always included in qemu. However there are lots of platforms that don't include ISA legacy devies, and quite a few that have never used ISA legacy devices at all. This patch allows the ISA bus code to be disabled in the configuration for platforms where it doesn't make sense. For now, the default configs are adjusted to include ISA on all platforms including PCI: anything with PCI can at least in principle add an i82378 PCI->ISA bridge. Also, CONFIG_IDE_CORE which is already in pci.mak requires ISA support. We also explicitly enable ISA on some other non-PCI platforms which include ISA devices: moxie, sparc and unicore32. We may want to pare this down in future. The platforms that will lose ISA by default are: cris, lm32, microblazeel, microblaze, openrisc, s390x, tricore, xtensaeb, xtensa. As far as I can tell none of these ever used ISA. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-06Split serial-isa into its own config optionDavid Gibson
At present, the core device model code for 8250-like serial ports (serial.c) and the code for serial ports attached to ISA-style legacy IO (serial-isa.c) are both controlled by the CONFIG_SERIAL variable. There are lots and lots of embedded platforms that have 8250-like serial ports but have never had anything resembling ISA legacy IO. Therefore, split serial-isa into its own CONFIG_SERIAL_ISA option so it can be disabled for platforms where it's not appropriate. For now, I enabled CONFIG_SERIAL_ISA in every default-config where CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best as I can tell, those platforms never used legacy ISA, and also don't include PCI support (which would allow connection of a PCI->ISA bridge and/or a southbridge including legacy ISA serial ports). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-02Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170202' ↵Peter Maydell
into staging ppc patch queue 2017-02-02 This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug. This is a long overdue ppc pull request for qemu-2.9. It's been a long time coming due to some holidays and inconveniently timed problems with testing. So, there's a lot in here: * More POWER9 instruction implementations for TCG * The simpler parts of my CPU compatibility mode cleanup * This changes behaviour to prefer compatibility modes over "raW" mode for new machine type versions * New "40p" machine type which is essentially a modernized and cleaned up "prep". The intention is that it will replace "prep" once it has some more testing and polish. * Add pseries-2.9 machine type * Implement H_SIGNAL_SYS_RESET hypercall * Consolidate the two alternate CPU init paths in pseries by making it always go through CPU core objects to initialize CPU * A number of bugfixes and cleanups * Stop the guest timebase when the guest is stopped under KVM. This makes the guest system clock also stop when paused, which matches the x86 behaviour. * Some preliminary cleanups leading towards implementation of the POWER9 MMU. There are also some changes not strictly related to ppc code, but for its benefit: * Limit the pxi-expander-bridge (PXB) device to x86 guests only (it's essentially a hack to work around historical x86 limitations) * Some additions to the 128-bit math in host_utils, necessary for some of the new instructions. * Revise a number of qtests and enable them for ppc # gpg: Signature made Thu 02 Feb 2017 01:40:16 GMT # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.9-20170202: (107 commits) hw/ppc/pnv: Use error_report instead of hw_error if a ROM file can't be found ppc/kvm: Handle the "family" CPU via alias instead of registering new types target/ppc/mmu_hash64: Fix incorrect shift value in amr calculation target/ppc/mmu_hash64: Fix printing unsigned as signed int tcg/POWER9: NOOP the cp_abort instruction target/ppc/debug: Print LPCR register value if register exists target-ppc: Add xststdc[sp, dp, qp] instructions target-ppc: Add xvtstdc[sp,dp] instructions target-ppc: Add MMU model check for booke machines ppc: switch to constants within BUILD_BUG_ON target/ppc/cpu-models: Fix/remove bad CPU aliases target/ppc: Remove unused POWERPC_FAMILY(POWER) spapr: clock should count only if vm is running ppc: Remove unused function cpu_ppc601_rtc_init() target/ppc: Add pcr_supported to POWER9 cpu class definition powerpc/cpu-models: rename ISAv3.00 logical PVR definition target-ppc: Add xvcv[hpsp, sphp] instructions target-ppc: Add xsmulqp instruction target-ppc: Add xsdivqp instruction target-ppc: Add xscvsdqp and xscvudqp instructions ... # Conflicts: # hw/pci-bridge/Makefile.objs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-01hw/pcie: Introduce a base class for PCI Express Root PortsMarcel Apfelbaum
The 'base' PCI Express Root Port includes the common code to be re-used for all Root Ports implementations. Most of the code was taken from the current implementation of Intel's IOH 3420 Root Port. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-31pxb: Restrict to x86David Gibson
The PCI Expander Bridge (PXB) device is essentially a hack to allow different PCIe devices to be assigned to different NUMA nodes on x86. Each PXB is sort-of a separate PCI host bridge, except that its config space is shared with the config space of the main PCI host bridge, rather than being independent. This is only necessary if the platform doesn't (easily) allow truly independent PCI host bridges. AFAIK that's just x86. This patch makes it possible to configure PXB out of the build, and adjusts the default configs so it's only included on x86 targets. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-31prep: add IBM RS/6000 7020 (40p) machine emulationHervé Poussineau
Machine supports both Open Hack'Ware and OpenBIOS. Open Hack'Ware is the default because OpenBIOS is currently unable to boot PReP boot partitions or PReP kernels. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> [dwg: Correct compile failure with KVM located by Thomas Huth] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31prep: add IBM RS/6000 7020 (40p) memory controllerHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Added CONFIG_RS6000_MC to ppc64 or it breaks testcases] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-24nios2: Add support for Nios-II R1Marek Vasut
Add remaining bits of the Altera NiosII R1 support into qemu, which is documentation, MAINTAINERS file entry, configure bits, arch_init and configuration files for both linux-user (userland binaries) and softmmu (hardware emulation). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Wulff <crwulff@gmail.com> Cc: Jeff Da Silva <jdasilva@altera.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Sandra Loosemore <sandra@codesourcery.com> Cc: Yves Vandervennet <yvanderv@altera.com> Reviewed-by: Alexander Graf <agraf@suse.de> Message-Id: <20170118220146.489-8-marex@denx.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23target-hppa: Add framework and enable compilationRichard Henderson
This is just about the minimum required to enable compilation without actually executing any instructions. This contains the HPPACPU structure and the required callbacks, the gdbstub, the basic translation loop, and a translate_one function that always results in an illegal instruction. Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: fix up niagara machineArtyom Tarasenko
Remove the Niagara stub implementation from sun4u.c and add a machine, compatible with Legion simulator from the OpenSPARC T1 project. The machine uses the firmware supplied with the OpenSPARC T1 project, http://download.oracle.com/technetwork/systems/opensparc/OpenSPARCT1_Arch.1.5.tar.bz2 in the directory S10image/, and is able to boot the supplied Solaris 10 image. Note that for compatibility with the naming conventions for SPARC machines the new machine name is lowercase niagara. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-14m68k: Remove PCI and USB from config fileThomas Huth
None of the ColdFire boards that we currently support has a PCI or USB bus (and AFAIK the upcoming q800 machine does not support PCI and USB either), so we do not need these settings the config file. Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20170106083956.53d08923@thl530> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2016-11-15pc: memhp: move nvdimm hotplug out of memory hotplugXiao Guangrong
as they use completely different way to handle hotplug event Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-10-28ppc/pnv: add skeleton PowerNV platformBenjamin Herrenschmidt
The goal is to emulate a PowerNV system at the level of the skiboot firmware, which loads the OS and provides some runtime services. Power Systems have a lower firmware (HostBoot) that does low level system initialization, like DRAM training. This is beyond the scope of what qemu will address in a PowerNV guest. No devices yet, not even an interrupt controller. Just to get started, some RAM to load the skiboot firmware, the kernel and initrd. The device tree is fully created in the machine reset op. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - replaced fprintf by error_report - used a common definition of _FDT macro - removed VMStateDescription as migration is not yet supported - added IBM Copyright statements - reworked kernel_filename handling - merged PnvSystem and sPowerNVMachineState - removed PHANDLE_XICP - added ppc_create_page_sizes_prop helper - removed nmi support - removed kvm support - updated powernv machine to version 2.8 - removed chips and cpus, They will be provided in another patches - added a machine reset routine to initialize the device tree (also) - french has a squelette and english a skeleton. - improved commit log. - reworked prototypes parameters - added a check on the ram size (thanks to Michael Ellerman) - fixed chip-id cell - changed MAX_CPUS to 2048 - simplified memory node creation to one node only - removed machine version - rewrote the device tree creation with the fdt "rw" routines - s/sPowerNVMachineState/PnvMachineState/ - etc.] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-21linux-user: disable unicore32 linux-user buildRiku Voipio
In order to cleanup linux-user, we need support for most relatively modern syscalls. unicore32 lacks support for syscalls like epoll_pwait, preventing cleaning up the CONFIG_EPOLL mess. This patch can be reverted when unicore32 starts either supporting the syscalls as defined in mainline kernel, or the oldabi interface gains support for syscalls supported since at kernel 2.6.19 / glibc 2.6 Cc: MPRC <zhangheng@mprc.pku.edu.cn> Cc: Xuetao Guan <gxt@mprc.pku.edu.cn> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-04STM32F2xx: Add the SPI deviceAlistair Francis
Add the STM32F2xx SPI device. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 8197811d5c94f814fa67c6a33ca2f7fd0aa97432.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F2xx: Add the ADC deviceAlistair Francis
Add the STM32F2xx ADC device. This device randomly generates values on each read. This also includes creating a hw/adc directory. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-13default-configs: remove CONFIG_PIIX_PCIDaniel P. Berrange
The CONFIG_PIIX_PCI=y setting was added in commit 70615c38ded2a20ad8282b7dcde95482fc0a7744 Author: Blue Swirl <blauwirbel@gmail.com> Date: Mon Mar 22 20:18:40 2010 +0000 Compile sound devices only once but nothing in that commit, nor anything pre-existing, ever referenced CONFIG_PIIX_PCI. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13default-configs: removed obsolete CONFIG_ISA_MMIODaniel P. Berrange
The use of the CONFIG_ISA_MMIO setting was removed in commit 61fcb628627ea464dc1954f615ae13edfefd284f Author: Paolo Bonzini <pbonzini@redhat.com> Date: Mon Jul 22 15:54:24 2013 +0200 isa_mmio: delete but this commit only removed it from some of the default config files. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13default-configs: remove CONFIG_PAMDaniel P. Berrange
The CONFIG_PAM=y setting was added in commit c0907c9e6417cb959dfd9ef6873221536ec91351 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Tue Feb 5 15:06:20 2013 +0100 hw: move PCI bridges to hw/pci-* or hw/ARCH but nothing in that commit, nor anything pre-existing, ever referenced CONFIG_PAM. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-04dma: Add Xilinx Zynq devcfg device modelAlistair Francis
Add a minimal model for the devcfg device which is part of Zynq. This model supports DMA capabilities and interrupt generation. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 83df49d8fa2d203a421ca71620809e4b04754e65.1467053537.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-01ppc/xics: Move SPAPR specific code to a separate fileBenjamin Herrenschmidt
Leave the core ICP/ICS logic in xics.c and move the top level class wrapper, hypercall and RTAS handlers to xics_spapr.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [add cpu.h in xics_spapr.c, move set_nr_irqs and set_nr_servers to xics_spapr.c] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-14hw/i2c-ddc.c: Implement DDC I2C slavePeter Maydell
Implement an I2C slave which implements DDC and returns the EDID data for an attached monitor. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com - Rebased on the current master. - Modified for QOM. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> [PMM: actually wire up the vmstate to dc->vmsd] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce dpcd moduleKONRAD Frederic
This introduces dpcd module. It wires on a aux-bus and can be accessed by the driver to get lane-speed, etc. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce aux-busKONRAD Frederic
This introduces a new bus: aux-bus. It contains an address space for aux slaves devices and a bridge to an I2C bus for I2C through AUX transactions. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-02net: Introduce e1000e device emulationDmitry Fleytman
This patch introduces emulation for the Intel 82574 adapter, AKA e1000e. This implementation is derived from the e1000 emulation code, and utilizes the TX/RX packet abstractions that were initially developed for the vmxnet3 device. Although some parts of the introduced code may be shared with e1000, the differences are substantial enough so that the only shared resources for the two devices are the definitions in hw/net/e1000_regs.h. Similarly to vmxnet3, the new device uses virtio headers for task offloads (for backends that support virtio extensions). Usage of virtio headers may be forcibly disabled via a boolean device property "vnet" (which is enabled by default). In such case task offloads will be performed in software, in the same way it is done on backends that do not support virtio headers. The device code is split into two parts: 1. hw/net/e1000e.c: QEMU-specific code for a network device; 2. hw/net/e1000e_core.[hc]: Device emulation according to the spec. The new device name is e1000e. Intel specifications for the 82574 controller are available at: http://www.intel.com/content/dam/doc/datasheet/82574l-gbe-controller-datasheet.pdf Throughput measurement results (iperf2): Fedora 22 guest, TCP, RX 4 ++------------------------------------------+ | | | X X X X X 3.5 ++ X X X X | | X | | | 3 ++ | G | X | b | | / 2.5 ++ | s | | | | 2 ++ | | | | | 1.5 X+ | | | + + + + + + + + + + + + 1 ++--+---+---+---+---+---+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Fedora 22 guest, TCP, TX 18 ++-------------------------------------------+ | X | 16 ++ X X X X X | X | 14 ++ | | | 12 ++ | G | X | b 10 ++ | / | | s 8 ++ | | | 6 ++ X | | | 4 ++ | | X | 2 ++ X | X + + + + + + + + + + + 0 ++--+---+---+---+---+----+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Fedora 22 guest, UDP, RX 3 ++------------------------------------------+ | X | | 2.5 ++ | | | | | 2 ++ X | G | | b | | / 1.5 ++ | s | X | | | 1 ++ | | | | X | 0.5 ++ | | X | X + + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Fedora 22 guest, UDP, TX 1 ++------------------------------------------+ | X 0.9 ++ | | | 0.8 ++ | 0.7 ++ | | | G 0.6 ++ | b | | / 0.5 ++ | s | X | 0.4 ++ | | | 0.3 ++ | 0.2 ++ X | | | 0.1 ++ X | X X + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Windows 2012R2 guest, TCP, RX 3.2 ++------------------------------------------+ | X | 3 ++ | | | 2.8 ++ | | | 2.6 ++ X | G | X X X X X b 2.4 ++ X X | / | | s 2.2 ++ | | | 2 ++ | | X X | 1.8 ++ | | | 1.6 X+ | + + + + + + + + + + + + 1.4 ++--+---+---+---+---+---+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Windows 2012R2 guest, TCP, TX 14 ++-------------------------------------------+ | | | X X 12 ++ | | | 10 ++ | | | G | | b 8 ++ | / | X | s 6 ++ | | | | | 4 ++ X | | | 2 ++ | | X X X | + X X + + X X + + + + + 0 X+--+---+---+---+---+----+---+---+---+---+---+ 32 64 128 256 512 1 2 4 8 16 32 64 B B B B B KB KB KB KB KB KB KB Buffer size Windows 2012R2 guest, UDP, RX 1.6 ++------------------------------------------X | | 1.4 ++ | | | 1.2 ++ | | X | | | G 1 ++ | b | | / 0.8 ++ | s | | 0.6 ++ X | | | 0.4 ++ | | X | | | 0.2 ++ X | X + + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Windows 2012R2 guest, UDP, TX 0.6 ++------------------------------------------+ | X | | 0.5 ++ | | | | | 0.4 ++ | G | | b | | / 0.3 ++ X | s | | | | 0.2 ++ | | | | X | 0.1 ++ | | X | X X + + + + 0 ++-------+--------+-------+--------+--------+ 32 64 128 256 512 1 B B B B B KB Datagram size Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-05-12i.MX: Add i.MX6 SOC implementation.Jean-Christophe DUBOIS
For now we only support the following devices: * up to 4 Cortex A9 cores * A9 MPCORE (SCU, GIC, TWD) * 5 i.MX UARTs * 2 EPIT timers * 1 GPT timer * 3 I2C controllers * 7 GPIO controllers * 6 SDHC controllers * 5 SPI controllers * 1 CCM device * 1 SRC device * various ROM/RAM areas. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30hw/gpio: Add the emulation of gpio_keyShannon Zhao
This will be used by ARM virt machine as a power button. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1458221140-15232-2-git-send-email-zhaoshenglong@huawei.com [PMM: Use hyphen rather than underscore in type names; add a comment briefly describing what the device does] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30hw/mips: implement ITC Configuration Tags and Storage CellsLeon Alrae
Implement ITC as a single object consisting of two memory regions: 1) tag_io: ITC Configuration Tags (i.e. ITCAddressMap{0,1} registers) which are accessible by the CPU via CACHE instruction. Also adding MemoryRegion *itc_tag to the CPUMIPSState so that CACHE instruction will dispatch reads/writes directly. 2) storage_io: memory-mapped ITC Storage whose address space is configurable (i.e. enabled/remapped/resized) by writing to ITCAddressMap{0,1} registers. ITC Storage contains FIFO and Semaphore cells. Read-only FIFO bit in the ITC cell tag indicates the type of the cell. If the ITC Storage contains both types of cells then FIFOs are located before Semaphores. Since issuing thread can get blocked on the access to a cell (in E/F Synchronized and P/V Synchronized Views) each cell has a bitmap to track which threads are currently blocked. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: implement generic MIPS Coherent Processing System containerLeon Alrae
Implement generic MIPS Coherent Processing System (CPS) which in this commit just creates VPs, but it will serve as a container also for other components like Global Configuration Registers and Cluster Power Controller. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-24Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160323' into stagingPeter Maydell
MIPS patches 2016-03-23 Changes: * add mips-softmmu-common.mak * indicate presence of IEEE 754-2008 FPU in MIPS64R6-generic and P5600 # gpg: Signature made Wed 23 Mar 2016 16:38:04 GMT using RSA key ID 0B29DA6B # gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>" * remotes/lalrae/tags/mips-20160323: default-configs: add mips-softmmu-common.mak target-mips: indicate presence of IEEE 754-2008 FPU in R6/R5+MSA CPUs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-23default-configs: add mips-softmmu-common.makLeon Alrae
Add mips-softmmu-common.mak and include it in existing mips*-softmmu.mak files to avoid having to repeat CONFIG defines four times. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-21event_notifier: Make event_notifier_init_fd() #ifdef CONFIG_EVENTFDMarkus Armbruster
Event notifiers are designed for eventfd(2). They can fall back to pipes, but according to Paolo, event_notifier_init_fd() really requires the real thing, and should therefore be under #ifdef CONFIG_EVENTFD. Do that. Its only user is ivshmem, which is currently CONFIG_POSIX. Narrow it to CONFIG_EVENTFD. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1458066895-20632-6-git-send-email-armbru@redhat.com>
2016-03-16hw/timer: Add ASPEED timer device modelAndrew Jeffery
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to 8 timers can independently be configured, enabled, reset and disabled. Some hardware features are not implemented, namely clock value matching and pulse generation, but the implementation is enough to boot the Linux kernel configured with aspeed_defconfig. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-2-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-09hw: Add support for LSI SAS1068 (mptsas) devicePaolo Bonzini
This adds the SAS1068 device, a SAS disk controller used in VMware that is oldish but widely supported and has decent performance. Unlike megasas, it presents itself as a SAS controller and not as a RAID controller. The device corresponds to the mptsas kernel driver in Linux. A few small things in the device setup are based on Don Slutz's old patch, but the device emulation was written from scratch based on Don's SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines shorter than Don's patch (and roughly the same size as MegaSAS---also because it doesn't support the similar SPI controller), implements SCSI task management functions (with asynchronous cancellation), supports big-endian hosts, has complete support for migration and follows the QEMU coding standards much more closely. To write the driver, I first split Don's patch in two parts, with the configuration bits in one file and the rest in a separate file. I first left mptconfig.c in place and rewrote the rest, then deleted mptconfig.c as well. The configuration pages are still based mostly on VirtualBox's, though not exactly the same. However, the implementation is completely different. The contents of the pages themselves should not be copyrightable. Signed-off-by: Don Slutz <Don@CloudSwitch.com> Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-03bcm2835_mbox: add BCM2835 mailboxesAndrew Baumann
This adds the system mailboxes which are used to communicate with a number of GPU peripherals on Pi/Pi2. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-22nvdimm acpi: build ACPI NFIT tableXiao Guangrong
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT) Currently, we only support PMEM mode. Each device has 3 structures: - SPA structure, defines the PMEM region info - MEM DEV structure, it has the @handle which is used to associate specified ACPI NVDIMM device we will introduce in later patch. Also we can happily ignored the memory device's interleave, the real nvdimm hardware access is hidden behind host - DCR structure, it defines vendor ID used to associate specified vendor nvdimm driver. Since we only implement PMEM mode this time, Command window and Data window are not needed The NVDIMM functionality is controlled by the parameter, 'nvdimm', which is introduced for the machine, there is a example to enable it: -machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \ memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \ nvdimm,memdev=mem1,id=nv1 It is disabled on default Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22nvdimm: implement NVDIMM device abstractXiao Guangrong
Introduce "nvdimm" device which is based on pc-dimm device type Currently, nothing is specific for nvdimm but hotplug is disabled Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add a BT low-level interfaceCorey Minyard
This provides the simulation of the BT hardware interface for IPMI. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add an ISA KCS low-level interfaceCorey Minyard
This provides the simulation of the KCS hardware interface. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add an external connection simulation interfaceCorey Minyard
This adds an interface for IPMI that connects to a remote BMC over a chardev (generally a TCP socket). The OpenIPMI lanserv simulator describes this interface, see that for interface details. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add a local BMC simulationCorey Minyard
This provides a minimal local BMC, basically enough to comply with the spec and provide a complete watchdog timer (including a sensor, SDR, and event). Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22Add a base IPMI interfaceCorey Minyard
Add the basic IPMI types and infrastructure to QEMU. Low-level interfaces and simulation interfaces will register with this; it's kind of the go-between to tie them together. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-17hw/misc: Hyper-V test device 'hyperv-testdev'Andrey Smetanin
'hyperv-testdev' will be used by kvm-unit-tests to setup Hyper-V SynIC SINT's routing and to inject Hyper-V SynIC SINT's. Hyper-V test device is ISA type device that creates 0x3000 IO memory region and catches write access into it. Every write operation data decoded into ctl code and parameters for Hyper-V test device. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Andreas Färber" <afaerber@suse.de> CC: Marcelo Tosatti <mtosatti@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 15:39:59 +0000