aboutsummaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)Author
2012-07-14esp: add AMD PCscsi emulation (PCI SCSI adapter)Hervé Poussineau
The PCI version is supported in lots of Operating Systems, and has been successfully tested on: - MS DOS 6.22 (using DC390 driver) - MS Windows 3.11 (using DC390 driver) - MS Windows 98 SE (using default driver) - MS Windows NT 3.1 (using DC390 driver) - MS Windows NT 4.0 (using default driver) Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-09megasas: disable due to build breakageAnthony Liguori
The Buildbot has detected a new failure on builder default_i386_rhel61 while building qemu. Full details are available at: http://buildbot.b1-systems.de/qemu/builders/default_i386_rhel61/builds/304 The proper fix is non-trivial so let's disable the build by default until it's fixed properly. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-02megasas: LSI Megaraid SAS HBA emulationHannes Reinecke
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA. I've tested it to work with Linux, Windows Vista, and Windows7. Signed-off-by: Hannes Reinecke <hare@suse.de> [ Squashed trivial changes from Andreas Faerber, rebased over IOMMU and QBus changes - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-15xilinx_axi*: Share devices between microblaze and microblazeelAndreas Färber
Speeds up the build. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-06-15hw/xilinx_*: Share Xilinx devices between ppc and microblazeAndreas Färber
Speeds up the build. xilinx_ethlite uses tswap32() and is thus target-dependent. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-05-01Drop darwin-userAndreas Färber
It's been orphaned, not compiling for a long time and despite Apple's drop of their Rosetta ppc emulation technology with Mac OS X Lion no one has stepped up to fix it. Testing necessary changes wrt QOM'ification thus is impossible, so we might as well remove it completely. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-19get rid of CONFIG_VIRTIO_SCSIPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-24Merge remote-tracking branch 'bonzini/virtio-scsi' into stagingAnthony Liguori
* bonzini/virtio-scsi: scsi-block: always use scsi_generic_ops for cache != none scsi: fix searching for an empty id scsi: fix wrong return for target INQUIRY virtio-scsi: add migration support virtio-scsi: process control queue requests virtio-scsi: add basic SCSI bus operation virtio-scsi: Add basic request processing infrastructure virtio-scsi: Add virtio-scsi stub device scsi-disk: add migration support scsi-generic: add migration support scsi: add SCSIDevice vmstate definitions scsi-disk: enable scatter/gather functionality scsi: add scatter/gather functionality scsi: pass residual amount to command_complete ahci: use new DMA helpers dma-helpers: add accounting wrappers dma-helpers: add dma_buf_read and dma_buf_write dma-helpers: make QEMUSGList target independent
2012-02-22jazz-led: compile it only twiceHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22hw/pc_sysfw: support system flash memory with pflashJordan Justen
Flash can be enabled by calling pc_system_firmware_init with the system_flash_enabled parameter being non-zero. If system_flash_enabled is zero, then the older qemu rom creation method will be used. If flash is enabled and a pflash image is found, then it is used for the system firmware image. If flash is enabled and a pflash image is not initially found, then a read-only pflash device is created using the -bios filename. KVM cannot execute from a pflash region currently. Therefore, when KVM is enabled, the old rom based initialization method is used. Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22virtio-scsi: Add virtio-scsi stub deviceStefan Hajnoczi
Add a useless virtio SCSI HBA device: qemu -device virtio-scsi-pci Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-02linux-user: Add default configs for mips64[el]Andreas Färber
Prepares for mips64[el]-linux-user targets. Signed-off-by: Khansa Butt <khansa@kics.edu.pk> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-02-02linux-user: Add default-configs for mipsn32[el]Andreas Färber
Prepares for mipsn32[el]-linux-user targets. Signed-off-by: Ulricht Hecht <uli@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-01-23Merge remote-tracking branch 'afaerber/prep-up' into stagingAnthony Liguori
* afaerber/prep-up: prep: Use i82378 PCI->ISA bridge for 'prep' machine prep: Add i82378 PCI-to-ISA bridge emulation prep: Add i82374 DMA emulation MAINTAINERS: Add PCI host bridge files to PReP machine prep: qdev'ify Raven host bridge (SysBus) prep_pci: Update I/O to MemoryRegion ops prep_pci: Simplify I/O endianness prep: qdev'ify Raven host bridge (PCIDevice) prep: Use ISA m48t59 prep: Fix offset of BIOS MemoryRegion
2012-01-22vga: make Cirrus ISA device optionalBlue Swirl
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-20prep: Add i82378 PCI-to-ISA bridge emulationAndreas Färber
Prepare Intel 82378 emulation for use by PReP platforms. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Create ISA bus in this device (suggested by Markus). Rebase onto Memory API, mark memory ops as Little Endian. Add VMState. Provide access to i8259 IRQs via qdev GPIOs. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Cc: Markus Armbruster <armbru@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jan Kiszka <jan.kiszka@siemens.com>
2012-01-20prep: Add i82374 DMA emulationAndreas Färber
Prepare Intel 82374 emulation for use by Intel 82378 PCI->ISA bridge. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Confine to CONFIG_I82374. Add VMState. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Alexander Graf <agraf@suse.de>
2012-01-17xhci: Initial xHCI implementationHector Martin
Based on the implementation from Hector Martin <hector@marcansoft.com> Hectors's implementation completely sidestepped the qemu usb system and used libusb directly for usb device pass through. So I've ripped out the libusb bits (or left them in disabled, as reference for further coding) and hooked up the qemu subsystem instead. That work is not complete yet though, partly due to limitations of the qemu usb subsystem. Nevertheless I think it is better to continue development in-tree, especially as the qemu usb bits need a bunch of improvements too for decent usb 3.0 support. Current state: - usb-storage emulation should work ok. - Devices which need constant polling (HID emulation like usb-tablet) are known to not work. - ISO xfers are not implemented yet. - superspeed ports are not implemented yet. - usb pass-through is completely untested so far. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-11-02xtensa_lx60: add FLASH supportMax Filippov
LX60 carry 4 Mbyte FLASH and 128 Kbyte SRAM, LX200 carry 16 Mbyte FLASH and 32 Mbyte SRAM. Either of these memories may be mapped to the system ROM region. Select boot from FLASH if -kernel option is not specified, otherwise boot from SRAM. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2011-10-16i8259: Move to hw libraryJan Kiszka
No target-specific bits remaining, let's move it over. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16target-xtensa: add Avnet LX60/LX110/LX200 boardsMax Filippov
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60, 96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550 UART. FPGA may be loaded with almost any Tensilica processor. It is also used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC and LED/DIP switches access. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-08target-alpha: Add CLIPPER emulation.Richard Henderson
This is a DP264 variant, SMP capable, no unusual hardware present. The emulation does not currently include any PCI IOMMU code. Hopefully the generic support for that can be merged to HEAD soon. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-09-10target-xtensa: add target to the configure scriptMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10g364fb: compile in hwlibBlue Swirl
Compile g364fb in hwlib. Two compilations less for the full build. Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-31target-alpha: Enable the alpha-softmmu target.Richard Henderson
With all of the pre-existing code that would not compile gone, this is the earliest point at which the target can be enabled. There is no machine defined yet, so this will crash on startup. Enable the target anyway, to make sure that further compilation problems do not creep back in. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-26usb: add ehci adapterGerd Hoffmann
This patch finally merges the EHCI host adapter aka USB 2.0 support. Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci EHCI has a long out-of-tree history. Project was started by Mark Burkley, with contributions by Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, Jan Kiszka and Vincent Palatin contributed bugfixes. /me (Gerd Hoffmann) picked it up where it left off, prepared the code for merge, fixed a few bugs and added basic user docs. Cc: David S. Ahern <daahern@cisco.com> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Kevin Wolf <mail@kevin-wolf.de> Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-20s390x: build s390x by defaultAlexander Graf
This patch enables building of s390x-softmmu and s390x-linux-user targets by default. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-12unicore32: necessary modifications for other files to support unicore32Guan Xuetao
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-04lm32: add support for the Milkymist boardMichael Walle
This patch adds almost complete support for the Milkymist system-on-chip (http://www.milkymist.org). Additional to running bare metal applications, booting a linux kernel with initrd is supported. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist memory card supportMichael Walle
This patch adds support for Milkymist's memory card core. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-22vmmouse: Fix typo preventing x86-64 buildJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-16microblaze: Compile uart 16550 serial driverMichal Simek
Upcomming little endian platform will use 16550 serial driver. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-07lm32: EVR32 and uclinux BSPMichael Walle
This patch adds support for the following two BSPs: - LM32 EVR32 BSP (as used by RTEMS) - uclinux BSP by Theobroma Systems Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-01microblaze: Correct copy+paste:o in defconfigsEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-02-23microblaze: Allow targeting little-endian mbEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-02-20applesmc: make optionalBlue Swirl
Based on patch by David Ahern. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12hpet: make optionalBlue Swirl
Ignore failure with hpet device creation. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12x86: make vmmouse optionalBlue Swirl
Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be created. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-17config: add ahci for pci capable machinesAlexander Graf
This patch enables AHCI for all machines supporting PCI. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-27Split out common pcnet codePaul Brook
The core pcnet emulation code is used by both the PCI "pcnet" device and the SPARC "lance" device. Split the common code frm the PCI code so that that can be configures independantly. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27Remove PCI from sparc32 targetPaul Brook
None of the (current) sparc32 machines have a PCI bus, so remove the PCI code from these configs. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27Fix previous commitPaul Brook
Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27VirtIO config optionPaul Brook
Make virtio devices optional. Selecting individual devices is not useful as the host bindings are all in one file. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27PCI config includePaul Brook
Split PCI config options into a separate file Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-09-30powerpc: Add a virtex5 ml507 refdesign boardEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2010-07-03piix4: compile only onceBlue Swirl
Compile piix4 in hwlib. Two compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-29MIPS: Initial support of VIA IDE controller used by fulong mini pcHuacai Chen
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29MIPS: Initial support of bonito north bridge used by fulong mini pcHuacai Chen
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-22Compile dma only onceBlue Swirl
Use a qemu_irq to request CPU exit. 7 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-27 02:39:36 +0000