aboutsummaryrefslogtreecommitdiff
path: root/default-configs/x86_64-softmmu.mak
AgeCommit message (Collapse)Author
2013-08-12pc_sysfw: do not make it a device anymorePaolo Bonzini
Move the code to hw/i386, the sole remaining property is available as !pci_enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com Rebased. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-04pci: Cleanup configuration for pci-hotplug.cDavid Gibson
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its compilation are misnamed. They're not about PCI hotplug in general, but rather about the pci_add/pci_del interface which are now deprecated in favour of the more general device_add/device_del interface. This patch therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD. CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no particular reason, so we clean that up too. In addition it was included in ppc64-softmmu.mak for which the old hotplug interface was never used and is unsuitable, so we remove that too. Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386. The small piece which wasn't is only called from the pci_add and pci_del hooks in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386. This patch therefore also removes the #ifdef from pci-hotplug-old.c, and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-05-01target-i386: Introduce ICC bus/device/bridgeIgor Mammedov
Provides a hotpluggable bus for APIC and CPU. * icc-bridge will serve as a parent for icc-bus and provide mmio mapping services to child icc-devices. * icc-device will replace SysBusDevice as a parent of APIC and IOAPIC devices. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-30introduce a new qom device to deal with panicked eventHu Tao
pvpanic device is used to send guest panic event from guest to qemu. When guest panic happens, pvpanic device driver will write a event number to IO port 0x505(which is the IO port occupied by pvpanic device, by default). On receiving the event, pvpanic device will pause guest cpu(s), and send a qmp event QEVENT_GUEST_PANICKED. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: b66077a40235b3531632a05a6ff373850afc7d2e.1366945969.git.hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: replace audio card configuration with default-configsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15configure: fix TPM logicPaolo Bonzini
A non-native i386 or x86_64 emulator should not have TPM passthrough support, since the TPM is only present for those hosts. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15Fix failure to create q35 machineHu Tao
This is a regression introduced by c0907c9e6417c. How to reproduce: $ qemu-system-x86_64 -nodefaults -vnc :0 -M q35 qemu-system-x86_64: Unknown device 'q35-pcihost' for default sysbus Aborted (core dumped) Tested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move other devices to hw/misc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move interrupt controllers to hw/intc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move PCI bridges to hw/pci-* or hw/ARCHPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move ISA bridges and devices to hw/isa/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move char devices to hw/char/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move more files to hw/xen/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move display devices to hw/display/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move block devices to hw/block/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move MC146818RTC to hw/timer/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move watchdogs to hw/watchdog, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make all of hw/pci/ configurable via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-12Build TPM passthrough for i386 and x86_64 targetsStefan Berger
Build the TPM passthrough driver only for i386 and x86_64 targets using the default-configs files for those targets with softmmu. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-8-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12Build the TPM frontend codeStefan Berger
Build the TPM frontend code that has been added so far. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-5-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-19make usb devices configurableGerd Hoffmann
Leave the core usb devices (usb hub, tablet, mouse, keyboard) enabled unconditionally. Make the other ones configurable. Exceptions: - bluetooth: not qdevified yet, has a vl.c dependency because of that, thus disabling isn't as easy as not linking the object file. - smardcard: ccid-card-emulated depends on that one *and* CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes as separate patch because of that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-22hw/pc_sysfw: support system flash memory with pflashJordan Justen
Flash can be enabled by calling pc_system_firmware_init with the system_flash_enabled parameter being non-zero. If system_flash_enabled is zero, then the older qemu rom creation method will be used. If flash is enabled and a pflash image is found, then it is used for the system firmware image. If flash is enabled and a pflash image is not initially found, then a read-only pflash device is created using the -bios filename. KVM cannot execute from a pflash region currently. Therefore, when KVM is enabled, the old rom based initialization method is used. Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-22vga: make Cirrus ISA device optionalBlue Swirl
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Move to hw libraryJan Kiszka
No target-specific bits remaining, let's move it over. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-22vmmouse: Fix typo preventing x86-64 buildJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-20applesmc: make optionalBlue Swirl
Based on patch by David Ahern. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12hpet: make optionalBlue Swirl
Ignore failure with hpet device creation. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12x86: make vmmouse optionalBlue Swirl
Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be created. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-27PCI config includePaul Brook
Split PCI config options into a separate file Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-05-22Compile dma only onceBlue Swirl
Use a qemu_irq to request CPU exit. 7 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile pckbd only onceBlue Swirl
Use a qemu_irq to indicate A20 line changes. Move I/O port 92 to pckbd.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-17Compile acpi_piix4, apm and pm_smbus only onceBlue Swirl
12 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile acpi only onceBlue Swirl
Use qemu_irqs to trigger CMOS S3 and SMI events. Avoid using kvm.h, which uses CPUState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile vmware_vga only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile ide/core only onceBlue Swirl
Make win2k install hack unconditional as it is still restricted to x86 only in vl.c. Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-26target-s390: Don't compile in virtio-pciAlexander Graf
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic gets confused and tries to give us PCI devices instead of S390 virtio devices. Since we don't have PCI on S390, we can safely not compile virtio-pci at all. In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I enabled for every platform except S390. Thanks to this the change should be a complete nop for every other platform. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-22Compile sound devices only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile serial only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile ne2000_isa only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile fdc only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile most IDE devices only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile usb-uhci only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile vga-isa only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile pcspk only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile i8254 only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile parallel only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile vga-pci only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-06Build usb-ohci for PCsKevin Wolf
The OHCI emulation isn't obviously broken and there are people who want to use it. Let's build it by default so that it can be enabled via -device. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 05:09:20 +0000