aboutsummaryrefslogtreecommitdiff
path: root/default-configs/sh4-softmmu.mak
AgeCommit message (Collapse)Author
2019-03-07sh4-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Note that USB_OHCI was missing (it was brought in via pci.mak, but r2d needs the sysbus version) and SERIAL is not used. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express SuperIO dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07display: express dependencies with kconfigYang Zhong
Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-40-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ptimer: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-39-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert usb.mak to KconfigPaolo Bonzini
Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert pci.mak to KconfigPaolo Bonzini
Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce CONFIG_TEST_DEVICESPaolo Bonzini
Devices that are mostly used for testing purposes (for example in endianness-test) will be moved under a new symbol CONFIG_TEST_DEVICES that can be disabled in the default-configs file. This makes it easier to drop this code from QEMU if desirable. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and deviceÁkos Kovács
Make hw/sh4 configurable and add new CONFIG_* to the default-configs/sh4*-softmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-13-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-07sm501: Implement i2c part for reading monitor EDIDBALATON Zoltan
Emulate the i2c part of SM501 which is used to access the EDID info from a monitor. The vmstate structure is changed and its version is increased but SM501 is only used on SH and PPC sam460ex machines that don't support cross-version migration. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-06Split serial-isa into its own config optionDavid Gibson
At present, the core device model code for 8250-like serial ports (serial.c) and the code for serial ports attached to ISA-style legacy IO (serial-isa.c) are both controlled by the CONFIG_SERIAL variable. There are lots and lots of embedded platforms that have 8250-like serial ports but have never had anything resembling ISA legacy IO. Therefore, split serial-isa into its own CONFIG_SERIAL_ISA option so it can be disabled for platforms where it's not appropriate. For now, I enabled CONFIG_SERIAL_ISA in every default-config where CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best as I can tell, those platforms never used legacy ISA, and also don't include PCI support (which would allow connection of a PCI->ISA bridge and/or a southbridge including legacy ISA serial ports). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-25default-configs: add SuperIO to SH4Paolo Bonzini
The device provides an ISA bus to run the endianness test on. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-23-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25default-configs: add test device to all machines supporting ISAPaolo Bonzini
This will let these machines run an endianness test for ISA I/O port space. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25isa_mmio: deletePaolo Bonzini
It is not used anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move display devices to hw/display/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move block devices to hw/block/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make all of hw/ide/ configurable via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-19make usb devices configurableGerd Hoffmann
Leave the core usb devices (usb hub, tablet, mouse, keyboard) enabled unconditionally. Make the other ones configurable. Exceptions: - bluetooth: not qdevified yet, has a vl.c dependency because of that, thus disabling isn't as easy as not linking the object file. - smardcard: ccid-card-emulated depends on that one *and* CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes as separate patch because of that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-27PCI config includePaul Brook
Split PCI config options into a separate file Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-13sh_pci: fix memory and I/O accessAurelien Jarno
Since commit 8da3ff180974732fc4272cb4433fef85c1822961 ("MMIO callback interface changes"), the addresses passed to the I/O functions are an offset to the start of the area. As a consequence, there is no need to correct the address using the value of IOBR. This make possible the use of the default MMIO functions. Moreover the addresses are now remaped when the value if IOBR change. The memory area corresponds to the devices behing the PCI bus, it should not be mapped by the PCI controller. Remove the corresponding code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-11hw/r2d: add flash memoryAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-27Compile ide/core only onceBlue Swirl
Make win2k install hack unconditional as it is still restricted to x86 only in vl.c. Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-26target-s390: Don't compile in virtio-pciAlexander Graf
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic gets confused and tries to give us PCI devices instead of S390 virtio devices. Since we don't have PCI on S390, we can safely not compile virtio-pci at all. In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I enabled for every platform except S390. Thanks to this the change should be a complete nop for every other platform. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-21Compile serial only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-08Only compile ptimer when one target uses itJuan Quintela
Patchworks-ID: 35207 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Only compile usb_ohci when one target uses itJuan Quintela
Patchworks-ID: 35199 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Add new config-devices.mak for each targetJuan Quintela
We generate config-devices.h from there automatically. We need to do it in main Makefile, because we are going to need a main Makefile for them. Patchworks-ID: 35196 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 14:06:56 +0000