aboutsummaryrefslogtreecommitdiff
path: root/default-configs/mips-softmmu.mak
AgeCommit message (Collapse)Author
2015-05-29ACPI: split CONFIG_ACPI into 4 piecesShannon Zhao
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86 to make it only for x86. ARM doesn't support cpu and memory hotplug, add CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them for target-arm. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-13pci: Move PCI VGA to pci.makAlexander Graf
Every platform that supports PCI can also spawn the Bochs VGA PCI adapter. Move it to pci.mak to enable it for everyone. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-07mips: Remove CONFIG_VT82C686 from non-Fulong configsMaciej W. Rozycki
Fix the regression introduced with commit 47934d0aadc075b05ce2d9e8a44fa6a46edd1afa [hw: move ISA bridges and devices to hw/isa/, configure with default-configs/], by removing CONFIG_VT82C686 from configurations that previously did not enable it. That southbridge is only available on Fulong platforms (CONFIG_FULONG) that are exclusively little-endian, 64-bit MIPS. Previously vt82c686.o was pulled explicitly with obj-$(CONFIG_FULONG). Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2013-08-14mips_malta: do not raise exceptions when accessing invalid memoryAurelien Jarno
Since commit c658b94f6e8c206c59d02aa6fbac285b86b53d2c, MIPS raises exceptions when accessing invalid memory. This is not the correct behaviour for MIPS Malta Core LV, as the GT-64120A system controller just ignore undecoded access. This feature is used by the Linux kernel to probe for some devices. Emulate the correct behaviour in QEMU by adding an empty slot covering the entire memory space decoded by the GT-64120A. Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-25default-configs: add test device to all machines supporting ISAPaolo Bonzini
This will let these machines run an endianness test for ISA I/O port space. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25isa_mmio: deletePaolo Bonzini
It is not used anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: replace audio card configuration with default-configsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move ISA bridges and devices to hw/isa/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move MC146818RTC to hw/timer/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-19make usb devices configurableGerd Hoffmann
Leave the core usb devices (usb hub, tablet, mouse, keyboard) enabled unconditionally. Make the other ones configurable. Exceptions: - bluetooth: not qdevified yet, has a vl.c dependency because of that, thus disabling isn't as easy as not linking the object file. - smardcard: ccid-card-emulated depends on that one *and* CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes as separate patch because of that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-02-22jazz-led: compile it only twiceHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-22vga: make Cirrus ISA device optionalBlue Swirl
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Move to hw libraryJan Kiszka
No target-specific bits remaining, let's move it over. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10g364fb: compile in hwlibBlue Swirl
Compile g364fb in hwlib. Two compilations less for the full build. Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-27PCI config includePaul Brook
Split PCI config options into a separate file Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-07-03piix4: compile only onceBlue Swirl
Compile piix4 in hwlib. Two compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile dma only onceBlue Swirl
Use a qemu_irq to request CPU exit. 7 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile pckbd only onceBlue Swirl
Use a qemu_irq to indicate A20 line changes. Move I/O port 92 to pckbd.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-17Compile acpi_piix4, apm and pm_smbus only onceBlue Swirl
12 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile pflash_cfi01 only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile acpi only onceBlue Swirl
Use qemu_irqs to trigger CMOS S3 and SMI events. Avoid using kvm.h, which uses CPUState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile vmware_vga only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile some MIPS devices only onceBlue Swirl
Move CPU specific declarations to a separate file. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile ide/core only onceBlue Swirl
Make win2k install hack unconditional as it is still restricted to x86 only in vl.c. Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-26target-s390: Don't compile in virtio-pciAlexander Graf
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic gets confused and tries to give us PCI devices instead of S390 virtio devices. Since we don't have PCI on S390, we can safely not compile virtio-pci at all. In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I enabled for every platform except S390. Thanks to this the change should be a complete nop for every other platform. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-22Compile sound devices only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile serial only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile ne2000_isa only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile fdc only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile most IDE devices only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile usb-uhci only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile vga-isa only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile pcspk only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile i8254 only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile parallel only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile vga-pci only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-08Only compile esp when one target uses itJuan Quintela
Patchworks-ID: 35206 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Only compile isa_mmio when one target uses itJuan Quintela
Patchworks-ID: 35200 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Add new config-devices.mak for each targetJuan Quintela
We generate config-devices.h from there automatically. We need to do it in main Makefile, because we are going to need a main Makefile for them. Patchworks-ID: 35196 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>