aboutsummaryrefslogtreecommitdiff
path: root/default-configs/i386-softmmu.mak
AgeCommit message (Collapse)Author
2020-03-05tpm: Separate TPM_TIS and TPM_TIS_ISA configsEric Auger
Let's separate the compilation of tpm_tis_common.c from the compilation of tpm_tis_isa.c The common part will be also compiled along with the tpm_tis_sysbus device. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Message-id: 20200305165149.618-5-eric.auger@redhat.com Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2019-10-22hw/i386: Introduce the microvm machine typeSergio Lopez
microvm is a machine type inspired by Firecracker and constructed after its machine model. It's a minimalist machine type without PCI nor ACPI support, designed for short-lived guests. microvm also establishes a baseline for benchmarking and optimizing both QEMU and guest operating systems, since it is optimized for both boot time and footprint. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-20ipmi: Add an SMBus IPMI interfaceCorey Minyard
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-20ipmi: Add PCI IPMI interfacesCorey Minyard
Pretty straightforward, just hook the current KCS and BT code into the PCI system with the proper configuration. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-09-16hw/i386: Move CONFIG_ACPI_PCI to CONFIG_PCCole Robinson
CONFIG_ACPI_PCI is a hard requirement of acpi-build.c, which is built unconditionally for x86 target. Putting it in default-configs/ suggests that it can be easily disabled, which isn't true. Relocate the symbol with the other acpi-build.c requirements, under 'config PC'. This is similar to what is done for the arm 'virt' machine type and CONFIG_ACPI_PCI Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-Id: <e73e6edff68fd30d69c6a1d02c9ef9192f773c63.1568049871.git.crobinso@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-29hw/acpi: Consolidate build_mcfg to pci.cWei Yang
Now we have two identical build_mcfg functions. Consolidate them in acpi/pci.c. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> v4: * ACPI_PCI depends on both ACPI and PCI * rebase on latest master, adjust arm Kconfig v3: * adjust changelog based on Igor's suggestion Message-Id: <20190521062836.6541-2-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-07i386-softmmu.mak: remove all CONFIG_* except boards definitionsYang Zhong
%-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ipmi: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07virtio: express virtio dependencies with KconfigYang Zhong
Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-42-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07hyperv: express dependencies with kconfigYang Zhong
remove default-configs/hyperv.mak and make dependencies with Kconfig. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-41-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i386: express dependencies with KconfigPaolo Bonzini
This way, the default-configs file only need to specify the boards and any optional devices. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-37-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert usb.mak to KconfigPaolo Bonzini
Instead of including the same list of devices for each target, let the host controllers select CONFIG_USB and make the devices default to present whenever USB is available. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on USB' \ `grep -lw $i hw/*/Kconfig` done < default-configs/usb.mak followed by adding "select USB" on the host controllers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-33-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert sound.mak to KconfigPaolo Bonzini
There is really nothing special in these devices; they are just ISA devices. Instead of including them for each target, set CONFIG_ISA_BUS to true, and make the devices default to present whenever ISA is available. More conversion of ISA devices will follow. Done with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y\' -e' depends on ISA_BUS' \ `grep -lw $i hw/*/Kconfig` done < default-configs/sound.mak Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-32-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert pci.mak to KconfigPaolo Bonzini
Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07hw/pci/Makefile.objs: make pcie configurableYang Zhong
Make pcie splited from pci and make it configurable. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-30-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce CONFIG_TEST_DEVICESPaolo Bonzini
Devices that are mostly used for testing purposes (for example in endianness-test) will be moved under a new symbol CONFIG_TEST_DEVICES that can be disabled in the default-configs file. This makes it easier to drop this code from QEMU if desirable. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: switch to KconfigPaolo Bonzini
The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI ↵Paolo Bonzini
controller Create separate variables for these components, they are used in many boards but not all. This allows finer-grain selection of the included code with default-configs/*.mak. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boardsPaolo Bonzini
CONFIG_PIIX and CONFIG_Q35 created for the pc board object files. These are enabled automatically at default-configs/i386-softmmu.mak and default-configs/x86_64-softmmu.mak Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-7-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05build: actually use CONFIG_PAMPaolo Bonzini
Do not link it unconditionally into all binaries. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-6-yang.zhong@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESSYang Zhong
Change the CONFIGs for PCI EXPRESS and make module name more clear for code files. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-5-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-24memory-device: introduce separate config optionDavid Hildenbrand
Some architectures might support memory devices, while they don't support DIMM/NVDIMM. So let's - Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE - Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-7-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-19default-configs: collect CONFIG_HYPERV* in hyperv.makRoman Kagan
Accumulate HYPERV config options in a dedicated file. There are only two so far; more will be added later. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-5-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel) * SCSI fix to pass maximum transfer size (Daniel Barboza) * chardev fixes and improved iothread support (Daniel Berrangé, Peter) * checkpatch tweak (Eric) * make help tweak (Marc-André) * make more PCI NICs available with -net or -nic (myself) * change default q35 NIC to e1000e (myself) * SCSI support for NDOB bit (myself) * membarrier system call support (myself) * SuperIO refactoring (Philippe) * miscellaneous cleanups and fixes (Thomas) # gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (69 commits) tcg: fix cpu_io_recompile replay: update documentation replay: save vmstate of the asynchronous events replay: don't process async events when warping the clock scripts/replay-dump.py: replay log dumper replay: avoid recursive call of checkpoints replay: check return values of fwrite replay: push replay_mutex_lock up the call tree replay: don't destroy mutex at exit replay: make locking visible outside replay code replay/replay-internal.c: track holding of replay_lock replay/replay.c: bump REPLAY_VERSION again replay: save prior value of the host clock replay: added replay log format description replay: fix save/load vm for non-empty queue replay: fixed replay_enable_events replay: fix processing async events cpu-exec: fix exception_index handling hw/i386/pc: Factor out the superio code hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # default-configs/i386-softmmu.mak # default-configs/x86_64-softmmu.mak
2018-03-13target/i386: add Secure Encrypted Virtualization (SEV) objectBrijesh Singh
Add a new memory encryption object 'sev-guest'. The object will be used to create encrypted VMs on AMD EPYC CPU. The object provides the properties to pass guest owner's public Diffie-hellman key, guest policy and session information required to create the memory encryption context within the SEV firmware. e.g to launch SEV guest # $QEMU \ -object sev-guest,id=sev0 \ -machine ....,memory-encryption=sev0 Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/i386: make IOMMUs configurable via default-configs/Paolo Bonzini
Allow distributions to disable the Intel and/or AMD IOMMU devices. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-05i2c: Add a CONFIG_I2C master switch to the configuration filesThomas Huth
The i2c core and the at24c EEPROM should only be compiled and linked on the machines that support i2c. Otherwise it's quite strange to see the at24c-eeprom to be "available" on qemu-system-s390x for example. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1516634853-15883-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-29tpm: add CRB deviceMarc-André Lureau
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB) Interface as defined in TCG PC Client Platform TPM Profile (PTP) Specification Family “2.0” Level 00 Revision 01.03 v22. The PTP allows device implementation to switch between TIS and CRB model at run time, but given that CRB is a simpler device to implement, I chose to implement it as a different device. The device doesn't implement other locality than 0 for now (my laptop TPM doesn't either, so I assume this isn't so bad) Tested with some success with Linux upstream and Windows 10, seabios & modified ovmf. The device is recognized and correctly transmit command/response with passthrough & emu. However, we are missing PPI ACPI part atm. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-11-16build-sys: restrict vmcoreinfo to fw_cfg+dma capable targetsMarc-André Lureau
vmcoreinfo is built for all targets. However, it requires fw_cfg with DMA operations support (write operation). Restrict vmcoreinfo exposure to architectures that are supporting FW_CFG_DMA, that is arm-virt and x86 only atm. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Tested-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-16default-configs: Enable CONFIG_VMXNET3_PCI only on x86Thomas Huth
The device can not be instantiated on many non-x86 and just prints some error messages, e.g.: $ qemu-system-ppc64 -device vmxnet3 -M g3beige [vmxnet3][WR][vmxnet3_init_msix]: Failed to initialize MSI-X, error -95 [vmxnet3][WR][vmxnet3_pci_realize]: Failed to initialize MSI-X, configuration is inconsistent. Since vmxnet3 is a para-virtualized device that is only useful on x86, it should also only be enabled on the x86 targets. Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2017-04-25move xen-mapcache.c to hw/i386/xen/Anthony Xu
move xen-mapcache.c to hw/i386/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-03-02ACPI: Add Virtual Machine Generation ID supportBen Warren
This implements the VM Generation ID feature by passing a 128-bit GUID to the guest via a fw_cfg blob. Any time the GUID changes, an ACPI notify event is sent to the guest The user interface is a simple device with one parameter: - guid (string, must be "auto" or in UUID format xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx) Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-06Split serial-isa into its own config optionDavid Gibson
At present, the core device model code for 8250-like serial ports (serial.c) and the code for serial ports attached to ISA-style legacy IO (serial-isa.c) are both controlled by the CONFIG_SERIAL variable. There are lots and lots of embedded platforms that have 8250-like serial ports but have never had anything resembling ISA legacy IO. Therefore, split serial-isa into its own CONFIG_SERIAL_ISA option so it can be disabled for platforms where it's not appropriate. For now, I enabled CONFIG_SERIAL_ISA in every default-config where CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best as I can tell, those platforms never used legacy ISA, and also don't include PCI support (which would allow connection of a PCI->ISA bridge and/or a southbridge including legacy ISA serial ports). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-02Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170202' ↵Peter Maydell
into staging ppc patch queue 2017-02-02 This obsoletes ppc-for-2.9-20170112, which had a MacOS build bug. This is a long overdue ppc pull request for qemu-2.9. It's been a long time coming due to some holidays and inconveniently timed problems with testing. So, there's a lot in here: * More POWER9 instruction implementations for TCG * The simpler parts of my CPU compatibility mode cleanup * This changes behaviour to prefer compatibility modes over "raW" mode for new machine type versions * New "40p" machine type which is essentially a modernized and cleaned up "prep". The intention is that it will replace "prep" once it has some more testing and polish. * Add pseries-2.9 machine type * Implement H_SIGNAL_SYS_RESET hypercall * Consolidate the two alternate CPU init paths in pseries by making it always go through CPU core objects to initialize CPU * A number of bugfixes and cleanups * Stop the guest timebase when the guest is stopped under KVM. This makes the guest system clock also stop when paused, which matches the x86 behaviour. * Some preliminary cleanups leading towards implementation of the POWER9 MMU. There are also some changes not strictly related to ppc code, but for its benefit: * Limit the pxi-expander-bridge (PXB) device to x86 guests only (it's essentially a hack to work around historical x86 limitations) * Some additions to the 128-bit math in host_utils, necessary for some of the new instructions. * Revise a number of qtests and enable them for ppc # gpg: Signature made Thu 02 Feb 2017 01:40:16 GMT # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.9-20170202: (107 commits) hw/ppc/pnv: Use error_report instead of hw_error if a ROM file can't be found ppc/kvm: Handle the "family" CPU via alias instead of registering new types target/ppc/mmu_hash64: Fix incorrect shift value in amr calculation target/ppc/mmu_hash64: Fix printing unsigned as signed int tcg/POWER9: NOOP the cp_abort instruction target/ppc/debug: Print LPCR register value if register exists target-ppc: Add xststdc[sp, dp, qp] instructions target-ppc: Add xvtstdc[sp,dp] instructions target-ppc: Add MMU model check for booke machines ppc: switch to constants within BUILD_BUG_ON target/ppc/cpu-models: Fix/remove bad CPU aliases target/ppc: Remove unused POWERPC_FAMILY(POWER) spapr: clock should count only if vm is running ppc: Remove unused function cpu_ppc601_rtc_init() target/ppc: Add pcr_supported to POWER9 cpu class definition powerpc/cpu-models: rename ISAv3.00 logical PVR definition target-ppc: Add xvcv[hpsp, sphp] instructions target-ppc: Add xsmulqp instruction target-ppc: Add xsdivqp instruction target-ppc: Add xscvsdqp and xscvudqp instructions ... # Conflicts: # hw/pci-bridge/Makefile.objs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-01hw/pcie: Introduce a base class for PCI Express Root PortsMarcel Apfelbaum
The 'base' PCI Express Root Port includes the common code to be re-used for all Root Ports implementations. Most of the code was taken from the current implementation of Intel's IOH 3420 Root Port. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-31pxb: Restrict to x86David Gibson
The PCI Expander Bridge (PXB) device is essentially a hack to allow different PCIe devices to be assigned to different NUMA nodes on x86. Each PXB is sort-of a separate PCI host bridge, except that its config space is shared with the config space of the main PCI host bridge, rather than being independent. This is only necessary if the platform doesn't (easily) allow truly independent PCI host bridges. AFAIK that's just x86. This patch makes it possible to configure PXB out of the build, and adjusts the default configs so it's only included on x86 targets. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2016-09-13default-configs: remove CONFIG_PIIX_PCIDaniel P. Berrange
The CONFIG_PIIX_PCI=y setting was added in commit 70615c38ded2a20ad8282b7dcde95482fc0a7744 Author: Blue Swirl <blauwirbel@gmail.com> Date: Mon Mar 22 20:18:40 2010 +0000 Compile sound devices only once but nothing in that commit, nor anything pre-existing, ever referenced CONFIG_PIIX_PCI. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13default-configs: remove CONFIG_PAMDaniel P. Berrange
The CONFIG_PAM=y setting was added in commit c0907c9e6417cb959dfd9ef6873221536ec91351 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Tue Feb 5 15:06:20 2013 +0100 hw: move PCI bridges to hw/pci-* or hw/ARCH but nothing in that commit, nor anything pre-existing, ever referenced CONFIG_PAM. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-22nvdimm acpi: build ACPI NFIT tableXiao Guangrong
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT) Currently, we only support PMEM mode. Each device has 3 structures: - SPA structure, defines the PMEM region info - MEM DEV structure, it has the @handle which is used to associate specified ACPI NVDIMM device we will introduce in later patch. Also we can happily ignored the memory device's interleave, the real nvdimm hardware access is hidden behind host - DCR structure, it defines vendor ID used to associate specified vendor nvdimm driver. Since we only implement PMEM mode this time, Command window and Data window are not needed The NVDIMM functionality is controlled by the parameter, 'nvdimm', which is introduced for the machine, there is a example to enable it: -machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \ memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \ nvdimm,memdev=mem1,id=nv1 It is disabled on default Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22nvdimm: implement NVDIMM device abstractXiao Guangrong
Introduce "nvdimm" device which is based on pc-dimm device type Currently, nothing is specific for nvdimm but hotplug is disabled Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add a BT low-level interfaceCorey Minyard
This provides the simulation of the BT hardware interface for IPMI. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add an ISA KCS low-level interfaceCorey Minyard
This provides the simulation of the KCS hardware interface. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add an external connection simulation interfaceCorey Minyard
This adds an interface for IPMI that connects to a remote BMC over a chardev (generally a TCP socket). The OpenIPMI lanserv simulator describes this interface, see that for interface details. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22ipmi: Add a local BMC simulationCorey Minyard
This provides a minimal local BMC, basically enough to comply with the spec and provide a complete watchdog timer (including a sensor, SDR, and event). Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22Add a base IPMI interfaceCorey Minyard
Add the basic IPMI types and infrastructure to QEMU. Low-level interfaces and simulation interfaces will register with this; it's kind of the go-between to tie them together. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-17hw/misc: Hyper-V test device 'hyperv-testdev'Andrey Smetanin
'hyperv-testdev' will be used by kvm-unit-tests to setup Hyper-V SynIC SINT's routing and to inject Hyper-V SynIC SINT's. Hyper-V test device is ISA type device that creates 0x3000 IO memory region and catches write access into it. Every write operation data decoded into ctl code and parameters for Hyper-V test device. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Andreas Färber" <afaerber@suse.de> CC: Marcelo Tosatti <mtosatti@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-02icc_bus: drop the unused filesZhu Guihua
ICC bus impl has been droped, so all icc related files are not useful any more; delete them. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-09-11virtio-vga: enable for i386Gerd Hoffmann
This one just syncs x86_64 and i386. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-trivial@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 17:55:11 +0000