aboutsummaryrefslogtreecommitdiff
path: root/default-configs/arm-softmmu.mak
AgeCommit message (Collapse)Author
2016-07-04dma: Add Xilinx Zynq devcfg device modelAlistair Francis
Add a minimal model for the devcfg device which is part of Zynq. This model supports DMA capabilities and interrupt generation. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 83df49d8fa2d203a421ca71620809e4b04754e65.1467053537.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12i.MX: Add i.MX6 SOC implementation.Jean-Christophe DUBOIS
For now we only support the following devices: * up to 4 Cortex A9 cores * A9 MPCORE (SCU, GIC, TWD) * 5 i.MX UARTs * 2 EPIT timers * 1 GPT timer * 3 I2C controllers * 7 GPIO controllers * 6 SDHC controllers * 5 SPI controllers * 1 CCM device * 1 SRC device * various ROM/RAM areas. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30hw/gpio: Add the emulation of gpio_keyShannon Zhao
This will be used by ARM virt machine as a power button. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1458221140-15232-2-git-send-email-zhaoshenglong@huawei.com [PMM: Use hyphen rather than underscore in type names; add a comment briefly describing what the device does] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16hw/timer: Add ASPEED timer device modelAndrew Jeffery
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to 8 timers can independently be configured, enabled, reset and disabled. Some hardware features are not implemented, namely clock value matching and pulse generation, but the implementation is enough to boot the Linux kernel configured with aspeed_defconfig. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-2-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03bcm2835_mbox: add BCM2835 mailboxesAndrew Baumann
This adds the system mailboxes which are used to communicate with a number of GPU peripherals on Pi/Pi2. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX25Jean-Christophe Dubois
For now we support the following devices: * CPU: ARM926 * Interrupt Controller: AVIC * CCM * UART x 5 * EPIT x 2 * GPT x 4 * FEC * I2C x 3 Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add FEC Ethernet EmulatorJean-Christophe Dubois
This is based on mcf_fec.c FEC implementation for Coldfire * A generic PHY was added (borrowwed from LAN9118) * The buffer management is also modified as buffers are slightly different between Coldfire and i.MX Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add I2C controller emulatorJean-Christophe Dubois
The slave mode is not implemented. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 508dbf2ebe26ec383d3a12a1db5a7890ac8acf20.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX31Jean-Christophe Dubois
For now we support the following devices: * CPU: ARM1136 * Interrupt Controller: AVIC * CCM * UART x 2 * EPIT x 2 * GPT Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07smbios: implement smbios support for mach-virtWei Huang
This patch generates smbios tables for ARM mach-virt. Also add CONFIG_SMBIOS=y for ARM default config. Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com [PMM: Added missing braces around an if().] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29ACPI: split CONFIG_ACPI into 4 piecesShannon Zhao
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86 to make it only for x86. ARM doesn't support cpu and memory hotplug, add CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them for target-arm. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-18hw/usb: Include USB files only if necessaryThomas Huth
Boards that do not include an USB controller should not provide USB devices. However, when running "qemu-system-s390x -device help" for example, there's still a usb-hub, usb-kbd, usb-mouse and usb-tablet in the list of "supported" devices. Let's fix that by compiling and linking the USB files only if it is really necessary. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-11stm32f205: Add the stm32f205 SoCAlistair Francis
This patch adds the stm32f205 SoC. This will be used by the Netduino 2 to create a machine. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFGAlistair Francis
This patch adds the stm32f2xx System Configuration Controller. This is used to configure what memory is mapped at address 0 (although that is not supported) as well as configure how the EXTI interrupts work (also not supported at the moment). This device is not required for basic examples, but more complex systems will require it (as well as the EXTI device) Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f2xx_USART: Add the stm32f2xx USART ControllerAlistair Francis
This patch adds the stm32f2xx USART controller (UART also uses the same controller). Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 762c6c0d2a41d574932bc4445ec9bfffe6da8798.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f2xx_timer: Add the stm32f2xx TimerAlistair Francis
This patch adds the stm32f2xx timers: TIM2, TIM3, TIM4 and TIM5 to QEMU. Signed-off-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 155091a323390f8da3cca496e4c611c493e62a77.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-27Create specific config option for "platform-bus"David Gibson
Currently the "platform-bus" device is included for all softmmu builds. This bridge is intended for use on any platforms that require dynamic creation of sysbus devices. However, at present it is used only for the PPC E500 target, with plans for the ARM "virt" target in the immediate future. To avoid a not-very-useful entry appearing in "qemu -device ?" output on other targets, this patch makes a specific config option for platform-bus and enables it (for now) only on ppc configurations which include E500 and on ARM (which always includes the "virt" target). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <1425017077-18487-3-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-27Add specific config options for PCI-E bridgesDavid Gibson
The i82801b11, ioh3420 and xio3130 PCI Express devices are currently included in the build unconditionally. While they could theoretically appear on any target platform with PCI-E, they're pretty unlikely to appear on platforms that aren't Intel derived. Therefore, to avoid presenting unlikely-to-be-relevant devices to the user, add config options to enable these components, and enable them by default only on x86 and arm platforms. (Note that this patch does include these for aarch64, via its inclusion of arm-softmmu.mak). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425017077-18487-2-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-18Make sysbus EHCI devices ARM only by defaultDavid Gibson
A number of ARM embedded boards include EHCI USB host controllers which appear as directly mapped devices, rather than sitting on a PCI bus. At present code to emulate such devices is included whenever EHCI support is included. This patch adjusts teh config options to only include them in builds targetting ARM by default. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-13arm: Add PCIe host bridge in virt machineAlexander Graf
Now that we have a working "generic" PCIe host bridge driver, we can plug it into ARM's virt machine to always have PCIe available to normal ARM VMs. I've successfully managed to expose a Bochs VGA device, XHCI and an e1000 into an AArch64 VM with this and they all lived happily ever after. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> [PMM: Squashed in fix for off-by-one error in bus-range DT property from Laszlo Ersek <lersek@redhat.com>] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08hw/net: add support for Allwinner EMAC Fast Ethernet controllerBeniamino Galvani
This patch adds support for the Fast Ethernet MAC found on Allwinner SoCs, together with a basic emulation of Realtek RTL8201CP PHY. Since there is no public documentation of the Allwinner controller, the implementation is based on Linux kernel driver. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add allwinner a10 SoC supportliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-5-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/intc: add allwinner A10 interrupt controllerliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1387159292-10436-4-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/timer: add allwinner a10 timerliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-3-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add very initial support for Canon DIGIC SoCAntony Pavlov
DIGIC is Canon Inc.'s name for a family of SoC for digital cameras and camcorders. There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10hw/timer: Introduce ARM A9 Global Timer.Peter Crosthwaite
The ARM A9 MPCore has a timer that is global to all cores in the cluster. The timer is shared but each core has a private independent comparator and interrupt. Based on version contributed by Francois LEGAL. Signed-off-by: François LEGAL <devel@thom.fr.eu.org> Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com [PC changes: * New commit message * Re-implemented as single timer model * Fixed backwards counting issue in polled mode * completed VMSD fields * macroified magic numbers (and headerified reg definitions) * split of as device-model-only patch * use bitops for 64 bit register access * Fixed auto increment mode to check condition properly * general cleanup (names/style etc). ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [PMM: * minor typo fixes * added missing return after error_setg() * dropped setting dc->no_user = 1 ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-11-05arm11mpcore: Split off SCU deviceAndreas Färber
Inspired by a9scu. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-10-31integrator: fix Linux boot failure by emulating dbg regionAlex Bennée
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel as the value returned by unassigned_mem_read returned non-zero and left the kernel looping forever waiting for it to change (see integrator_led_set in the kernel code). Relying on a varying implementation detail is incorrect anyway so this introduces a basic stub of a memory region for the debug/LED section on the integrator board. Signed-off-by: Alex Bennée <alex@bennee.com> Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org [PMM: removed three unused fields from struct IntegratorDebugState] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-10-16default-configs/: CONFIG_GDBSTUB_XML removedÁkos Kovács
Makefile.target: Build gdbstub-xml.o only when TARGET_XML_FILES is not empty. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-20default-configs: Fix A9MP and A15MP config namesPeter Maydell
When individual CONFIG_ switches for the A9MPcore and A15MPcore devices were created, they were inadvertently given incorrect names (CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are "Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is a different (rather older) CPU than the Cortex-A9. Rename the CONFIG_ switches to bring them into line with the source file names and CPU names. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org
2013-04-15hw: Add lost ARM core againStefan Weil
Commit 0434e30afb6175212389811e0b28b948eb3c1e40 accidentally removed the compilation of arm11mpcore.c. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move ARM CPU cores to hw/cpu/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move other devices to hw/misc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move interrupt controllers to hw/intc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move timer devices to hw/timer/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move char devices to hw/char/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move SSI controllers to hw/ssi/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move I2C controllers to hw/i2c/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move display devices to hw/display/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move audio devices to hw/audio/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move block devices to hw/block/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move NICs to hw/net/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make all of hw/usb/ configurable via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make all of hw/ide/ configurable via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-15pl330: Initial versionPeter Crosthwaite
Device model for Primecell PL330 DMA controller. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28hw/sdhci: introduce standard SD host controllerIgor Mitsyanko
Device model for standard SD Host Controller Interface (SDHCI) compliant with version 2.00 of SD association specification. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-19make usb devices configurableGerd Hoffmann
Leave the core usb devices (usb hub, tablet, mouse, keyboard) enabled unconditionally. Make the other ones configurable. Exceptions: - bluetooth: not qdevified yet, has a vl.c dependency because of that, thus disabling isn't as easy as not linking the object file. - smardcard: ccid-card-emulated depends on that one *and* CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes as separate patch because of that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-10m25p80: Initial implementation of SPI flash devicePeter A. G. Crosthwaite
Added device model for m25p80 style SPI flash family. Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-08-13arm: Move some ARM devices into libhwAndreas Färber
Avoids some unnecessary dependencies on cpu.h and prepares for a future armeb-softmmu where most machines would not be built. Defer touching the SoC devices since most have implicit or explicit dependencies on the CPU. Signed-off-by: Andreas Färber <andreas.faerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-01-22vga: make Cirrus ISA device optionalBlue Swirl
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 11:10:56 +0000