aboutsummaryrefslogtreecommitdiff
path: root/default-configs/arm-softmmu.mak
AgeCommit message (Collapse)Author
2017-09-21msf2: Add Smartfusion2 SoCSubbaraya Sundeep
Smartfusion2 SoC has hardened Microcontroller subsystem and flash based FPGA fabric. This patch adds support for Microcontroller subsystem in the SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-5-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type, check m3clk non null] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-17hw/misc/mps2_scc: Implement MPS2 Serial Communication ControllerPeter Maydell
Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-17hw/char/cmsdk-apb-timer: Implement CMSDK APB timer devicePeter Maydell
Implement a model of the simple timer device found in the CMSDK. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-5-git-send-email-peter.maydell@linaro.org
2017-07-17hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UARTPeter Maydell
Implement a model of the simple "APB UART" provided in the Cortex-M System Design Kit (CMSDK). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-07-17hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board modelsPeter Maydell
Model the ARM MPS2/MPS2+ FPGA based development board. The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger FPGA but is otherwise the same as the 2). Since the CPU itself and most of the devices are in the FPGA, the details of the board as seen by the guest depend significantly on the FPGA image. We model the following FPGA images: "mps2_an385" -- Cortex-M3 as documented in ARM Application Note AN385 "mps2_an511" -- Cortex-M3 'DesignStart' as documented in AN511 They are fairly similar but differ in the details for some peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500029487-14822-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-06-13hw/misc: add a TMP42{1, 2, 3} device modelCédric Le Goater
Largely inspired by the TMP105 temperature sensor, here is a model for the TMP42{1,2,3} temperature sensors. Specs can be found here : http://www.ti.com/lit/gpn/tmp421 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1496739230-32109-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24net: add FTGMAC100 supportCédric Le Goater
The FTGMAC100 device is an Ethernet controller with DMA function that can be found on Aspeed SoCs (which include NCSI). It is fully compliant with IEEE 802.3 specification for 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and includes Reduced Media Independent Interface (RMII) and Reduced Gigabit Media Independent Interface (RGMII) interfaces. It adopts an AHB bus interface and integrates a link list DMA engine with direct M-Bus accesses for transmitting and receiving packets. It has independent TX/RX fifos, supports half and full duplex (1000 Mbps mode only supports full duplex), flow control for full duplex and backpressure for half duplex. The FTGMAC100 also implements IP, TCP, UDP checksum offloads and supports IEEE 802.1Q VLAN tag insertion and removal. It offers high-priority transmit queue for QoS and CoS applications This model is backed with a RealTek 8211E PHY which is the chip found on the AST2500 EVB. It is complete enough to satisfy two different Linux drivers and a U-Boot driver. Not supported features are : - IEEE 802.1Q VLAN - High Priority Transmit Queue - Wake-On-LAN functions The code is based on the Coldfire Fast Ethernet Controller model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-02-28armv7m: Don't put core v7M devices under CONFIG_STELLARISPeter Maydell
The NVIC is a core v7M device that exists for all v7M CPUs; put it under a CONFIG_ARM_V7M rather than hiding it under CONFIG_STELLARIS. (We'll use CONFIG_ARM_V7M for the SysTick device too when we split it out of the NVIC.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org
2017-02-10hw/vfio: Add CONFIG switches for calxeda-xgmac and amd-xgbeThomas Huth
Both devices seem to be specific to the ARM platform. It's confusing for the users if they show up on other target architectures, too (e.g. when the user runs QEMU with "-device ?" to get a list of supported devices). Thus let's introduce proper configuration switches so that the devices are only compiled and included when they are really required. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-02-06Split serial-isa into its own config optionDavid Gibson
At present, the core device model code for 8250-like serial ports (serial.c) and the code for serial ports attached to ISA-style legacy IO (serial-isa.c) are both controlled by the CONFIG_SERIAL variable. There are lots and lots of embedded platforms that have 8250-like serial ports but have never had anything resembling ISA legacy IO. Therefore, split serial-isa into its own CONFIG_SERIAL_ISA option so it can be disabled for platforms where it's not appropriate. For now, I enabled CONFIG_SERIAL_ISA in every default-config where CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best as I can tell, those platforms never used legacy ISA, and also don't include PCI support (which would allow connection of a PCI->ISA bridge and/or a southbridge including legacy ISA serial ports). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-01hw/pcie: Introduce a base class for PCI Express Root PortsMarcel Apfelbaum
The 'base' PCI Express Root Port includes the common code to be re-used for all Root Ports implementations. Most of the code was taken from the current implementation of Intel's IOH 3420 Root Port. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-04STM32F2xx: Add the SPI deviceAlistair Francis
Add the STM32F2xx SPI device. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 8197811d5c94f814fa67c6a33ca2f7fd0aa97432.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04STM32F2xx: Add the ADC deviceAlistair Francis
Add the STM32F2xx ADC device. This device randomly generates values on each read. This also includes creating a hw/adc directory. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-13default-configs: removed obsolete CONFIG_ISA_MMIODaniel P. Berrange
The use of the CONFIG_ISA_MMIO setting was removed in commit 61fcb628627ea464dc1954f615ae13edfefd284f Author: Paolo Bonzini <pbonzini@redhat.com> Date: Mon Jul 22 15:54:24 2013 +0200 isa_mmio: delete but this commit only removed it from some of the default config files. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473096320-1638-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-04dma: Add Xilinx Zynq devcfg device modelAlistair Francis
Add a minimal model for the devcfg device which is part of Zynq. This model supports DMA capabilities and interrupt generation. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 83df49d8fa2d203a421ca71620809e4b04754e65.1467053537.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12i.MX: Add i.MX6 SOC implementation.Jean-Christophe DUBOIS
For now we only support the following devices: * up to 4 Cortex A9 cores * A9 MPCORE (SCU, GIC, TWD) * 5 i.MX UARTs * 2 EPIT timers * 1 GPT timer * 3 I2C controllers * 7 GPIO controllers * 6 SDHC controllers * 5 SPI controllers * 1 CCM device * 1 SRC device * various ROM/RAM areas. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30hw/gpio: Add the emulation of gpio_keyShannon Zhao
This will be used by ARM virt machine as a power button. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1458221140-15232-2-git-send-email-zhaoshenglong@huawei.com [PMM: Use hyphen rather than underscore in type names; add a comment briefly describing what the device does] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16hw/timer: Add ASPEED timer device modelAndrew Jeffery
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to 8 timers can independently be configured, enabled, reset and disabled. Some hardware features are not implemented, namely clock value matching and pulse generation, but the implementation is enough to boot the Linux kernel configured with aspeed_defconfig. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-2-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03bcm2835_mbox: add BCM2835 mailboxesAndrew Baumann
This adds the system mailboxes which are used to communicate with a number of GPU peripherals on Pi/Pi2. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX25Jean-Christophe Dubois
For now we support the following devices: * CPU: ARM926 * Interrupt Controller: AVIC * CCM * UART x 5 * EPIT x 2 * GPT x 4 * FEC * I2C x 3 Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add FEC Ethernet EmulatorJean-Christophe Dubois
This is based on mcf_fec.c FEC implementation for Coldfire * A generic PHY was added (borrowwed from LAN9118) * The buffer management is also modified as buffers are slightly different between Coldfire and i.MX Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add I2C controller emulatorJean-Christophe Dubois
The slave mode is not implemented. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 508dbf2ebe26ec383d3a12a1db5a7890ac8acf20.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX31Jean-Christophe Dubois
For now we support the following devices: * CPU: ARM1136 * Interrupt Controller: AVIC * CCM * UART x 2 * EPIT x 2 * GPT Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07smbios: implement smbios support for mach-virtWei Huang
This patch generates smbios tables for ARM mach-virt. Also add CONFIG_SMBIOS=y for ARM default config. Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com [PMM: Added missing braces around an if().] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29ACPI: split CONFIG_ACPI into 4 piecesShannon Zhao
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86 to make it only for x86. ARM doesn't support cpu and memory hotplug, add CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them for target-arm. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-18hw/usb: Include USB files only if necessaryThomas Huth
Boards that do not include an USB controller should not provide USB devices. However, when running "qemu-system-s390x -device help" for example, there's still a usb-hub, usb-kbd, usb-mouse and usb-tablet in the list of "supported" devices. Let's fix that by compiling and linking the USB files only if it is really necessary. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-11stm32f205: Add the stm32f205 SoCAlistair Francis
This patch adds the stm32f205 SoC. This will be used by the Netduino 2 to create a machine. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFGAlistair Francis
This patch adds the stm32f2xx System Configuration Controller. This is used to configure what memory is mapped at address 0 (although that is not supported) as well as configure how the EXTI interrupts work (also not supported at the moment). This device is not required for basic examples, but more complex systems will require it (as well as the EXTI device) Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f2xx_USART: Add the stm32f2xx USART ControllerAlistair Francis
This patch adds the stm32f2xx USART controller (UART also uses the same controller). Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 762c6c0d2a41d574932bc4445ec9bfffe6da8798.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f2xx_timer: Add the stm32f2xx TimerAlistair Francis
This patch adds the stm32f2xx timers: TIM2, TIM3, TIM4 and TIM5 to QEMU. Signed-off-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 155091a323390f8da3cca496e4c611c493e62a77.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-27Create specific config option for "platform-bus"David Gibson
Currently the "platform-bus" device is included for all softmmu builds. This bridge is intended for use on any platforms that require dynamic creation of sysbus devices. However, at present it is used only for the PPC E500 target, with plans for the ARM "virt" target in the immediate future. To avoid a not-very-useful entry appearing in "qemu -device ?" output on other targets, this patch makes a specific config option for platform-bus and enables it (for now) only on ppc configurations which include E500 and on ARM (which always includes the "virt" target). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <1425017077-18487-3-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-27Add specific config options for PCI-E bridgesDavid Gibson
The i82801b11, ioh3420 and xio3130 PCI Express devices are currently included in the build unconditionally. While they could theoretically appear on any target platform with PCI-E, they're pretty unlikely to appear on platforms that aren't Intel derived. Therefore, to avoid presenting unlikely-to-be-relevant devices to the user, add config options to enable these components, and enable them by default only on x86 and arm platforms. (Note that this patch does include these for aarch64, via its inclusion of arm-softmmu.mak). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425017077-18487-2-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-18Make sysbus EHCI devices ARM only by defaultDavid Gibson
A number of ARM embedded boards include EHCI USB host controllers which appear as directly mapped devices, rather than sitting on a PCI bus. At present code to emulate such devices is included whenever EHCI support is included. This patch adjusts teh config options to only include them in builds targetting ARM by default. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-13arm: Add PCIe host bridge in virt machineAlexander Graf
Now that we have a working "generic" PCIe host bridge driver, we can plug it into ARM's virt machine to always have PCIe available to normal ARM VMs. I've successfully managed to expose a Bochs VGA device, XHCI and an e1000 into an AArch64 VM with this and they all lived happily ever after. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> [PMM: Squashed in fix for off-by-one error in bus-range DT property from Laszlo Ersek <lersek@redhat.com>] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08hw/net: add support for Allwinner EMAC Fast Ethernet controllerBeniamino Galvani
This patch adds support for the Fast Ethernet MAC found on Allwinner SoCs, together with a basic emulation of Realtek RTL8201CP PHY. Since there is no public documentation of the Allwinner controller, the implementation is based on Linux kernel driver. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add allwinner a10 SoC supportliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-5-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/intc: add allwinner A10 interrupt controllerliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1387159292-10436-4-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/timer: add allwinner a10 timerliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-3-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add very initial support for Canon DIGIC SoCAntony Pavlov
DIGIC is Canon Inc.'s name for a family of SoC for digital cameras and camcorders. There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10hw/timer: Introduce ARM A9 Global Timer.Peter Crosthwaite
The ARM A9 MPCore has a timer that is global to all cores in the cluster. The timer is shared but each core has a private independent comparator and interrupt. Based on version contributed by Francois LEGAL. Signed-off-by: François LEGAL <devel@thom.fr.eu.org> Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com [PC changes: * New commit message * Re-implemented as single timer model * Fixed backwards counting issue in polled mode * completed VMSD fields * macroified magic numbers (and headerified reg definitions) * split of as device-model-only patch * use bitops for 64 bit register access * Fixed auto increment mode to check condition properly * general cleanup (names/style etc). ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [PMM: * minor typo fixes * added missing return after error_setg() * dropped setting dc->no_user = 1 ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-11-05arm11mpcore: Split off SCU deviceAndreas Färber
Inspired by a9scu. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-10-31integrator: fix Linux boot failure by emulating dbg regionAlex Bennée
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel as the value returned by unassigned_mem_read returned non-zero and left the kernel looping forever waiting for it to change (see integrator_led_set in the kernel code). Relying on a varying implementation detail is incorrect anyway so this introduces a basic stub of a memory region for the debug/LED section on the integrator board. Signed-off-by: Alex Bennée <alex@bennee.com> Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org [PMM: removed three unused fields from struct IntegratorDebugState] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-10-16default-configs/: CONFIG_GDBSTUB_XML removedÁkos Kovács
Makefile.target: Build gdbstub-xml.o only when TARGET_XML_FILES is not empty. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-20default-configs: Fix A9MP and A15MP config namesPeter Maydell
When individual CONFIG_ switches for the A9MPcore and A15MPcore devices were created, they were inadvertently given incorrect names (CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are "Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is a different (rather older) CPU than the Cortex-A9. Rename the CONFIG_ switches to bring them into line with the source file names and CPU names. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org
2013-04-15hw: Add lost ARM core againStefan Weil
Commit 0434e30afb6175212389811e0b28b948eb3c1e40 accidentally removed the compilation of arm11mpcore.c. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move ARM CPU cores to hw/cpu/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move other devices to hw/misc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move interrupt controllers to hw/intc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move timer devices to hw/timer/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move char devices to hw/char/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-26 21:55:12 +0000