aboutsummaryrefslogtreecommitdiff
path: root/cpus.c
AgeCommit message (Collapse)Author
2018-10-02cpus: fix TCG kick timer leakAlex Bennée
This is an alternative fix to Marc-André's original patch. Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20180927171724.30128-1-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02replay: wake up vCPU when replayingPavel Dovgalyuk
In record/replay icount mode vCPU thread and iothread synchronize the execution using the checkpoints. vCPU thread processes the virtual timers and iothread processes all others. When iothread wants to wake up sleeping vCPU thread, it sends dummy queued work. Therefore it could be the following sequence of the events in record mode: - IO: sending dummy work - IO: processing timers - CPU: wakeup - CPU: clearing dummy work - CPU: processing virtual timers But due to the races in replay mode the sequence may change: - IO: sending dummy work - CPU: wakeup - CPU: clearing dummy work - CPU: sleeping again because nothing to do - IO: Processing timers - CPU: zzzz In this case vCPU will not wake up, because dummy work is not to be set up again. This patch tries to wake up the vCPU when it sleeps and the icount warp checkpoint isn't met. It means that vCPU has something to do, because there are no other reasons of non-matching warp checkpoint. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> -- v5: improve checking that vCPU is still sleeping Message-Id: <20180912081945.3228.19776.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02cpus: access .qemu_icount_bias with atomic64Emilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20180910232752.31565-11-cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02cpus: access .qemu_icount with atomic64Emilio G. Cota
Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20180910232752.31565-10-cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02cpus: take seqlock across qemu_icount updatesPaolo Bonzini
Even though writes of qemu_icount can safely race with reads in qemu_icount_raw, qemu_icount is also read by icount_adjust, which runs in the I/O thread. Therefore, writes do needs protection of the vm_clock_lock; for simplicity the patch protects it with both seqlock+spinlock, which we already do for hosts that lack 64-bit atomics. The bug actually predated the introduction of vm_clock_lock; cpu_update_icount would have needed the BQL before the spinlock was introduced. Reported-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02cpus: initialize timers_state.vm_clock_lockEmilio G. Cota
We forgot to initialize the spinlock introduced in 94377115b2 ("cpus: protect TimerState writes with a spinlock", 2018-08-23). Fix it. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20180903171831.15446-5-cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-24Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' ↵Peter Maydell
into staging ppc patch queue 2018-09-07 Here's another pull request for qemu-3.1. No real theme here, just an assortment of various fixes. Probably the most notable thing is the removal of the ppcemb target which has been deprecated for some time now. # gpg: Signature made Fri 07 Sep 2018 08:30:02 BST # gpg: using RSA key 6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-3.1-20180907: target-ppc: Extend HWCAP2 bits for ISA 3.0 target/ppc/kvm: set vcpu as online/offline Fix a deadlock case in the CPU hotplug flow spapr: Correct reference count on spapr-cpu-core mac_newworld: implement custom FWPathProvider uninorth: add ofw-addr property to allow correct fw path generation mac_oldworld: implement custom FWPathProvider grackle: set device fw_name and address for correct fw path generation macio: add addr property to macio IDE object macio: add macio bus to help with fw path generation macio: move MACIOIDEState type declarations to macio.h spapr_pci: fix potential NULL pointer dereference spapr: fix leak of rev array ppc: Remove deprecated ppcemb target Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-28qapi: Drop qapi_event_send_FOO()'s Error ** argumentPeter Xu
The generated qapi_event_send_FOO() take an Error ** argument. They can't actually fail, because all they do with the argument is passing it to functions that can't fail: the QObject output visitor, and the @qmp_emit callback, which is either monitor_qapi_event_queue() or event_test_emit(). Drop the argument, and pass &error_abort to the QObject output visitor and @qmp_emit instead. Suggested-by: Eric Blake <eblake@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-4-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rewritten, update to qapi-code-gen.txt corrected] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-28ppc: Remove deprecated ppcemb targetThomas Huth
There is no known available OS for ppc around anymore that uses page sizes below 4k, so it does not make much sense that we keep wasting our time on building and testing the ppcemb-softmmu target. It has been deprecated since two releases, and nobody complained, so let's remove this now. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-23cpus: allow cpu_get_ticks out of BQLPaolo Bonzini
Because of cpu_ticks_prev, we cannot use a seqlock. But then the conversion is even easier. :) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23cpus: protect TimerState writes with a spinlockPaolo Bonzini
In the next patch, we will need to write cpu_ticks_offset from any thread, even outside the BQL. Currently, it is protected by the BQL just because cpu_enable_ticks and cpu_disable_ticks happen to hold it, but the critical sections are well delimited and it's easy to remove the BQL dependency. Add a spinlock that matches vm_clock_seqlock, and hold it when writing to the TimerState. This also lets us fix cpu_update_icount when 64-bit atomics are not available. Fields of TiemrState are reordered to avoid padding. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23cpus: protect all icount computation with seqlockPaolo Bonzini
Move the icount->ns computation to cpu_get_icount, and make cpu_get_icount_locked return the raw value. This makes the atomic_read__nocheck safe, because it now happens always inside a seqlock and any torn reads will be retried. qemu_icount_bias and icount_time_shift also need to be accessed with atomics. At the same time, however, you don't need atomic_read within the writer, because no concurrent writes are possible. The fix to vmstate lets us keep the struct nicely packed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23qom: convert the CPU list to RCUEmilio G. Cota
Iterating over the list without using atomics is undefined behaviour, since the list can be modified concurrently by other threads (e.g. every time a new thread is created in user-mode). Fix it by implementing the CPU list as an RCU QTAILQ. This requires a little bit of extra work to traverse list in reverse order (see previous patch), but other than that the conversion is trivial. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <20180819091335.22863-12-cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23qsp: track BQL callers explicitlyEmilio G. Cota
The BQL is acquired via qemu_mutex_lock_iothread(), which makes the profiler assign the associated wait time (i.e. most of BQL wait time) entirely to that function. This loses the original call site information, which does not help diagnose BQL contention. Fix it by tracking the callers explicitly. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-22tcg: fix --disable-tcg build breakageEmilio G. Cota
Fix the --disable-tcg breakage introduced by tb_lock's removal by relying on the fact that tcg_enabled() is set to 0 at compile-time under --disable-tcg. While at it, add further asserts to fix builds that enable both --disable-tcg and --enable-debug, which were broken even before tb_lock's removal. Tested to build x86_64-softmmu and i386-softmmu targets. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22qapi: remove empty flat union branches and typesAnton Nefedov
Flat unions may now have uncovered branches, so it is possible to get rid of empty types defined for that purpose only. Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1529311206-76847-3-git-send-email-anton.nefedov@virtuozzo.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-09cpus: tcg: fix never exiting loop on unplugCédric Le Goater
Commit 9b0605f9837b ("cpus: tcg: unregister thread with RCU, fix exiting of loop on unplug") changed the exit condition of the loop in the vCPU thread function but forgot to remove the beginning 'while (1)' statement. The resulting code : while (1) { ... } while (!cpu->unplug || cpu_can_run(cpu)); is a sequence of two distinct two while() loops, the first not exiting in case of an unplug event. Remove the first while (1) to fix CPU unplug. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20180425131828.15604-1-clg@kaod.org> Cc: qemu-stable@nongnu.org Fixes: 9b0605f9837b68fd56c7fc7c96a3a1a3b983687d Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2018-05-09cpus: Fix event order on resume of stopped guestMarkus Armbruster
When resume of a stopped guest immediately runs into block device errors, the BLOCK_IO_ERROR event is sent before the RESUME event. Reproducer: 1. Create a scratch image $ dd if=/dev/zero of=scratch.img bs=1M count=100 Size doesn't actually matter. 2. Prepare blkdebug configuration: $ cat >blkdebug.conf <<EOF [inject-error] event = "write_aio" errno = "5" EOF Note that errno 5 is EIO. 3. Run a guest with an additional scratch disk, i.e. with additional arguments -drive if=none,id=scratch-drive,format=raw,werror=stop,file=blkdebug:blkdebug.conf:scratch.img -device virtio-blk-pci,id=scratch,drive=scratch-drive The blkdebug part makes all writes to the scratch drive fail with EIO. The werror=stop pauses the guest on write errors. 4. Connect to the QMP socket e.g. like this: $ socat UNIX:/your/qmp/socket READLINE,history=$HOME/.qmp_history,prompt='QMP> ' Issue QMP command 'qmp_capabilities': QMP> { "execute": "qmp_capabilities" } 5. Boot the guest. 6. In the guest, write to the scratch disk, e.g. like this: # dd if=/dev/zero of=/dev/vdb count=1 Do double-check the device specified with of= is actually the scratch device! 7. Issue QMP command 'cont': QMP> { "execute": "cont" } After step 6, I get a BLOCK_IO_ERROR event followed by a STOP event. Good. After step 7, I get BLOCK_IO_ERROR, then RESUME, then STOP. Not so good; I'd expect RESUME, then BLOCK_IO_ERROR, then STOP. The funny event order confuses libvirt: virsh -r domstate DOMAIN --reason reports "paused (unknown)" rather than "paused (I/O error)". The culprit is vm_prepare_start(). /* Ensure that a STOP/RESUME pair of events is emitted if a * vmstop request was pending. The BLOCK_IO_ERROR event, for * example, according to documentation is always followed by * the STOP event. */ if (runstate_is_running()) { qapi_event_send_stop(&error_abort); res = -1; } else { replay_enable_events(); cpu_enable_ticks(); runstate_set(RUN_STATE_RUNNING); vm_state_notify(1, RUN_STATE_RUNNING); } /* We are sending this now, but the CPUs will be resumed shortly later */ qapi_event_send_resume(&error_abort); return res; When resuming a stopped guest, we take the else branch before we get to sending RESUME. vm_state_notify() runs virtio_vmstate_change(), among other things. This restarts I/O, triggering the BLOCK_IO_ERROR event. Reshuffle vm_prepare_start() to send the RESUME event earlier. Fixes RHBZ 1566153. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180423084518.2426-1-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-04qapi: discriminate CpuInfoFast on SysEmuTarget, not CpuInfoArchLaszlo Ersek
Add a new field @target (of type @SysEmuTarget) to the output of the @query-cpus-fast command, which provides more information about the emulation target than the field @arch (of type @CpuInfoArch). Make @target the new discriminator for the @CpuInfoFast return structure. Keep @arch for compatibility. Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180427192852.15013-5-lersek@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04qapi: fill in CpuInfoFast.arch in query-cpus-fastLaszlo Ersek
* Commit ca230ff33f89 added the @arch field to @CpuInfoFast, but it failed to set the new field in qmp_query_cpus_fast(), when TARGET_S390X was not defined. The updated @query-cpus-fast example in "qapi-schema.json" showed "arch":"x86" only because qmp_query_cpus_fast() calls g_malloc0() to allocate @CpuInfoFast, and the CPU_INFO_ARCH_X86 enum constant is generated with value 0. All @arch values other than @s390 implied the @CpuInfoOther sub-struct for @CpuInfoFast -- at the time of writing the patch --, thus no fields other than @arch needed to be set when TARGET_S390X was not defined. Set @arch now, by copying the corresponding assignments from qmp_query_cpus(). * Commit 25fa194b7b11 added the @riscv enum constant to @CpuInfoArch (used in both @CpuInfo and @CpuInfoFast -- the return types of the @query-cpus and @query-cpus-fast commands, respectively), and assigned, in both return structures, the @CpuInfoRISCV sub-structure to the new enum value. However, qmp_query_cpus_fast() would not populate either the @arch field or the @CpuInfoRISCV sub-structure, when TARGET_RISCV was defined; only qmp_query_cpus() would. Assign @CpuInfoOther to the @riscv enum constant in @CpuInfoFast, and populate only the @arch field in qmp_query_cpus_fast(). Getting CPU state without interrupting KVM is an exceptional thing that only S390X does currently. Quoting Cornelia Huck <cohuck@redhat.com>, "s390x is exceptional in that it has state in QEMU that is actually interesting for upper layers and can be retrieved without performance penalty". See also <https://www.redhat.com/archives/libvir-list/2018-February/msg00121.html>. Cc: Cornelia Huck <cohuck@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Viktor VM Mihajlovski <mihajlov@linux.vnet.ibm.com> Cc: qemu-stable@nongnu.org Fixes: ca230ff33f89bf7102cbfbc2328716da6750aaed Fixes: 25fa194b7b11901561532e435beb83d046899f7a Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180427192852.15013-2-lersek@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-04-10cpus.c: ensure running CPU recalculates icount deadlines on timer expiryPeter Maydell
When we run in TCG icount mode, we calculate the number of instructions to execute using tcg_get_icount_limit(), which ensures that we stop execution at the next timer deadline. However there is a bug where currently we do not recalculate that limit if the guest reprograms a timer so that the next deadline moves closer, and so we will continue execution until the original limit and fire the timer later than we should. Fix this bug in qemu_timer_notify_cb(): if we are currently running a VCPU in icount mode, we simply need to kick it out of the main loop and back to tcg_cpu_exec(), where it will recalculate the icount limit. If we are not currently running a VCPU, then we retain the existing logic for waking up a halted CPU. Cc: qemu-stable@nongnu.org Fixes: https://bugs.launchpad.net/qemu/+bug/1754038 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180406123838.21249-1-peter.maydell@linaro.org
2018-03-12replay: push replay_mutex_lock up the call treeAlex Bennée
Now instead of using the replay_lock to guard the output of the log we now use it to protect the whole execution section. This replaces what the BQL used to do when it was held during TCG execution. We also introduce some rules for locking order - mainly that you cannot take the replay_mutex while holding the BQL. This leads to some slight sophistry during start-up and extending the replay_mutex_destroy function to unlock the mutex without checking for the BQL condition so it can be cleanly dropped in the non-replay case. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Tested-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095248.1060.40374.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-03-09Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Fri 09 Mar 2018 13:19:02 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: vl: introduce vm_shutdown() virtio-scsi: fix race between .ioeventfd_stop() and vq handler virtio-blk: fix race between .ioeventfd_stop() and vq handler block: add aio_wait_bh_oneshot() virtio-blk: dataplane: Don't batch notifications if EVENT_IDX is present README: Fix typo 'git-publish' block: Fix qemu crash when using scsi-block Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-08vl: introduce vm_shutdown()Stefan Hajnoczi
Commit 00d09fdbbae5f7864ce754913efc84c12fdf9f1a ("vl: pause vcpus before stopping iothreads") and commit dce8921b2baaf95974af8176406881872067adfa ("iothread: Stop threads before main() quits") tried to work around the fact that emulation was still active during termination by stopping iothreads. They suffer from race conditions: 1. virtio_scsi_handle_cmd_vq() racing with iothread_stop_all() hits the virtio_scsi_ctx_check() assertion failure because the BDS AioContext has been modified by iothread_stop_all(). 2. Guest vq kick racing with main loop termination leaves a readable ioeventfd that is handled by the next aio_poll() when external clients are enabled again, resulting in unwanted emulation activity. This patch obsoletes those commits by fully disabling emulation activity when vcpus are stopped. Use the new vm_shutdown() function instead of pause_all_vcpus() so that vm change state handlers are invoked too. Virtio devices will now stop their ioeventfds, preventing further emulation activity after vm_stop(). Note that vm_stop(RUN_STATE_SHUTDOWN) cannot be used because it emits a QMP STOP event that may affect existing clients. It is no longer necessary to call replay_disable_events() directly since vm_shutdown() does so already. Drop iothread_stop_all() since it is no longer used. Cc: Fam Zheng <famz@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20180307144205.20619-5-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-07RISC-V Build InfrastructureMichael Clark
This adds RISC-V into the build system enabling the following targets: - riscv32-softmmu - riscv64-softmmu - riscv32-linux-user - riscv64-linux-user This adds defaults configs for RISC-V, enables the build for the RISC-V CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh' script is updated to add the RISC-V ELF magic. Expected checkpatch errors for consistency reasons: ERROR: line over 90 characters FILE: scripts/qemu-binfmt-conf.sh Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-06cpus: CPU threads are always created initially for one CPU onlyDavid Hildenbrand
It can never happen for single-threaded TCG that we have more than one CPU in the list, while the first one has not been marked as "created". Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180209195239.16048-4-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06cpus: wait for CPU creation at central placeDavid Hildenbrand
We can now also wait for the CPU creation for single-threaded TCG, so we can move the waiting bits further out. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180209195239.16048-3-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06cpus: properly inititalize CPU > 1 under single-threaded TCGDavid Hildenbrand
All but the first CPU are currently not fully inititalized (e.g. cpu->created is never set). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180209195239.16048-2-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-26qmp: add architecture specific cpu data for query-cpus-fastViktor Mihajlovski
The s390 CPU state can be retrieved without interrupting the VM execution. Extendend the CpuInfoFast union with architecture specific data and an implementation for s390. Return data looks like this: [ {"thread-id":64301,"props":{"core-id":0}, "arch":"s390","cpu-state":"operating", "qom-path":"/machine/unattached/device[0]","cpu-index":0}, {"thread-id":64302,"props":{"core-id":1}, "arch":"s390","cpu-state":"operating", "qom-path":"/machine/unattached/device[1]","cpu-index":1} ] Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1518797321-28356-4-git-send-email-mihajlov@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26qmp: add query-cpus-fastLuiz Capitulino
The query-cpus command has an extremely serious side effect: it always interrupts all running vCPUs so that they can run ioctl calls. This can cause a huge performance degradation for some workloads. And most of the information retrieved by the ioctl calls are not even used by query-cpus. This commit introduces a replacement for query-cpus called query-cpus-fast, which has the following features: o Never interrupt vCPUs threads. query-cpus-fast only returns vCPU information maintained by QEMU itself, which should be sufficient for most management software needs o Drop "halted" field as it can not be retrieved in a fast way on most architectures o Drop irrelevant fields such as "current", "pc" and "arch" o Rename some fields for better clarification & proper naming standard Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Message-Id: <1518797321-28356-3-git-send-email-mihajlov@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26qmp: expose s390-specific CPU infoViktor Mihajlovski
Presently s390x is the only architecture not exposing specific CPU information via QMP query-cpus. Upstream discussion has shown that it could make sense to report the architecture specific CPU state, e.g. to detect that a CPU has been stopped. With this change the output of query-cpus will look like this on s390: [ {"arch": "s390", "current": true, "props": {"core-id": 0}, "cpu-state": "operating", "CPU": 0, "qom_path": "/machine/unattached/device[0]", "halted": false, "thread_id": 63115}, {"arch": "s390", "current": false, "props": {"core-id": 1}, "cpu-state": "stopped", "CPU": 1, "qom_path": "/machine/unattached/device[1]", "halted": true, "thread_id": 63116} ] This change doesn't add the s390-specific data to HMP 'info cpus'. A follow-on patch will remove all architecture specific information from there. Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1518797321-28356-2-git-send-email-mihajlov@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-07Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* socket option parsing fix (Daniel) * SCSI fixes (Fam) * Readline double-free fix (Greg) * More HVF attribution fixes (Izik) * WHPX (Windows Hypervisor Platform Extensions) support (Justin) * POLLHUP handler (Klim) * ivshmem fixes (Ladi) * memfd memory backend (Marc-André) * improved error message (Marcelo) * Memory fixes (Peter Xu, Zhecheng) * Remove obsolete code and comments (Peter M.) * qdev API improvements (Philippe) * Add CONFIG_I2C switch (Thomas) # gpg: Signature made Wed 07 Feb 2018 15:24:08 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) Add the WHPX acceleration enlightenments Introduce the WHPX impl Add the WHPX vcpu API Add the Windows Hypervisor Platform accelerator. tests/test-filter-redirector: move close() tests: use memfd in vhost-user-test vhost-user-test: make read-guest-mem setup its own qemu tests: keep compiling failing vhost-user tests Add memfd based hostmem memfd: add hugetlbsize argument memfd: add hugetlb support memfd: add error argument, instead of perror() cpus: join thread when removing a vCPU cpus: hvf: unregister thread with RCU cpus: tcg: unregister thread with RCU, fix exiting of loop on unplug cpus: dummy: unregister thread with RCU, exit loop on unplug cpus: kvm: unregister thread with RCU cpus: hax: register/unregister thread with RCU, exit loop on unplug ivshmem: Disable irqfd on device reset ivshmem: Improve MSI irqfd error handling ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # cpus.c
2018-02-07Add the WHPX acceleration enlightenmentsJustin Terry (VM)
Implements the WHPX accelerator cpu enlightenments to actually use the whpx-all accelerator on Windows platforms. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> Message-Id: <1516655269-1785-5-git-send-email-juterry@microsoft.com> [Register/unregister VCPU thread with RCU. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07cpus: join thread when removing a vCPUPaolo Bonzini
If no one joins the thread, its associated memory is leaked. Reported-by: CheneyLin <linzc@zju.edu.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07cpus: hvf: unregister thread with RCUPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07cpus: tcg: unregister thread with RCU, fix exiting of loop on unplugPaolo Bonzini
Keep running until cpu_can_run(cpu) becomes false, for consistency with other acceslerators. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07cpus: dummy: unregister thread with RCU, exit loop on unplugPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07cpus: kvm: unregister thread with RCUPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07cpus: hax: register/unregister thread with RCU, exit loop on unplugPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-06tcg: Replace fprintf(stderr, "*\n" with error_report()Alistair Francis
Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Stefan Weil <sw@weilnetz.de> Conversions that aren't followed by exit() dropped, because they might be inappropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-14-armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-01-16cpus: unify qemu_*_wait_io_eventPaolo Bonzini
Except for round-robin TCG, every other accelerator is using more or less the same code around qemu_wait_io_event_common. The exception is HAX, which also has to eat the dummy APC that is queued by qemu_cpu_kick_thread. We can add the SleepEx call to qemu_wait_io_event under "if (!tcg_enabled())", since that is the condition that is used in qemu_cpu_kick_thread, and unify the function for KVM, HAX, HVF and multi-threaded TCG. Single-threaded TCG code can also be simplified since it is only used in the round-robin, sleep-if-all-CPUs-idle case. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-16icount: fixed saving/restoring of icount warp timersPavel Dovgalyuk
This patch adds saving and restoring of the icount warp timers in the vmstate. It is needed because there timers affect the virtual clock value. Therefore determinism of the execution in icount record/replay mode depends on determinism of the timers. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2017-12-22i386: hvf: add code base from Google's QEMU repositorySergio Andres Gomez Del Real
This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21cpu: refactor cpu_address_space_init()Peter Xu
Normally we create an address space for that CPU and pass that address space into the function. Let's just do it inside to unify address space creations. It'll simplify my next patch to rename those address spaces. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20171123092333.16085-3-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21cpus: make pause_all_cpus() play with SMP on single threaded TCGDavid Hildenbrand
pause_all_cpus() is sometimes called from a VCPU thread (e.g. s390x during special reset). It cannot deal with multiple VCPUs per Thread (single threaded TCG) yet. Booting an s390x guest with -smp 2 and single threaded TCG from disk currently fails. The DIAG 308 will issue a pause_all_cpus() and wait forever for the CPUs to actually stop. But it is waiting for itself. So let's stop all VCPUs belonging to the current thread. Factor out stopping of a VCPU. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20171129191215.11323-1-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-24tcg: enable multiple TCG contexts in softmmuEmilio G. Cota
This enables parallel TCG code generation. However, we do not take advantage of it yet since tb_lock is still held during tb_gen_code. In user-mode we use a single TCG context; see the documentation added to tcg_region_init for the rationale. Note that targets do not need any conversion: targets initialize a TCGContext (e.g. defining TCG globals), and after this initialization has finished, the context is cloned by the vCPU threads, each of them keeping a separate copy. TCG threads claim one entry in tcg_ctxs[] by atomically increasing n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's of that variable and tcg_ctxs; they are there just to play nice with analysis tools such as thread sanitizer. Note that we do not allocate an array of contexts (we allocate an array of pointers instead) because when tcg_context_init is called, we do not know yet how many contexts we'll use since the bool behind qemu_tcg_mttcg_enabled() isn't set yet. Previous patches folded some TCG globals into TCGContext. The non-const globals remaining are only set at init time, i.e. before the TCG threads are spawned. Here is a list of these set-at-init-time globals under tcg/: Only written by tcg_context_init: - indirect_reg_alloc_order - tcg_op_defs Only written by tcg_target_init (called from tcg_context_init): - tcg_target_available_regs - tcg_target_call_clobber_regs - arm: arm_arch, use_idiv_instructions - i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt, have_movbe, have_popcnt - mips: use_movnz_instructions, use_mips32_instructions, use_mips32r2_instructions, got_sigill (tcg_target_detect_isa) - ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr - s390: tb_ret_addr, s390_facilities - sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines), use_vis3_instructions Only written by tcg_prologue_init: - 'struct jit_code_entry one_entry' - aarch64: tb_ret_addr - arm: tb_ret_addr - i386: tb_ret_addr, guest_base_flags - ia64: tb_ret_addr - mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 04:54:49 +0000