| Age | Commit message (Collapse) | Author |
|---|
|
Otherwise, grace periods are detected too early!
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.
Scripted conversion for target-* change:
for I in target-*/cpu.h; do
sed -i \
's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
$I;
done
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
The sole caller of this function navigates the cpu->env_ptr only for
this function to take it back the cpu pointer straight away. Pass in
cpu pointer instead and grab the env pointer locally in the function.
Removes a core code usage of ENV_GET_CPU().
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This function will be used to avoid recursive locking of the iothread lock
whenever address_space_rw/ld*/st* are called with the BQL held, which is
almost always the case.
Tracking whether the iothread is owned is very cheap (just use a TLS
variable) but requires some care because now the lock must always be
taken with qemu_mutex_lock_iothread(). Previously this wasn't the case.
Outside TCG mode this is not a problem. In TCG mode, we need to be
careful and avoid the "prod out of compiled code" step if already
in a VCPU thread. This is easily done with a check on current_cpu,
i.e. qemu_in_vcpu_thread().
Hopefully, multithreaded TCG will get rid of the whole logic to kick
VCPUs whenever an I/O event occurs!
Cc: Frederic Konrad <fred.konrad@greensocs.com>
Message-Id: <1434646046-27150-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The next patch will require the BQL to be always taken with
qemu_mutex_lock_iothread(), while right now this isn't the case.
Outside TCG mode this is not a problem. In TCG mode, we need to be
careful and avoid the "prod out of compiled code" step if already
in a VCPU thread. This is easily done with a check on current_cpu,
i.e. qemu_in_vcpu_thread().
Hopefully, multithreaded TCG will get rid of the whole logic to kick
VCPUs whenever an I/O event occurs!
Cc: Frederic Konrad <fred.konrad@greensocs.com>
Message-Id: <1434646046-27150-2-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
While qemu is running in sleep=no mode, a warning will be printed
when no timer deadline is set.
As this mode is intended for getting deterministic virtual time, if no
timer is set on the virtual clock this determinism is broken.
Signed-off-by: Victor CLEMENT <victor.clement@openwide.fr>
Message-Id: <1432912446-9811-4-git-send-email-victor.clement@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The 'sleep' parameter sets the icount_sleep mode, which is enabled by
default. To disable it, add the 'sleep=no' parameter (or 'nosleep') to the
qemu -icount option.
Signed-off-by: Victor CLEMENT <victor.clement@openwide.fr>
Message-Id: <1432912446-9811-3-git-send-email-victor.clement@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When the icount_sleep mode is disabled, the QEMU_VIRTUAL_CLOCK runs at the
maximum possible speed by warping the sleep times of the virtual cpu to the
soonest clock deadline. The virtual clock will be updated only according
the instruction counter.
Signed-off-by: Victor CLEMENT <victor.clement@openwide.fr>
Message-Id: <1432912446-9811-2-git-send-email-victor.clement@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This will allow clients to query additional information directly using
qom-get on the CPU objects.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
following a464982499b2f637f6699e3d03e0a9d2e0b5288b, it's now possible for
there to be attempts to take the BQL before CPUs have been realized in
cases where a machine model inits peripherals before the first CPU.
BQL lock aquisition kicks the first_cpu, leading to a segfault if this
happens pre-realize. Guard the CPU kick routine to perform no action for
a CPU that doesn't exist or doesn't have a thread yet.
There was a fix to this with commit
6b49809c597331803ea941eadda813e5bb4e8fe2, but the check there misses
the case where the CPU has been inited and not realized. Strengthen the
check to make sure that the first_cpu has a thread (i.e. it is
realized) before allowing the kick.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1427107689-6946-1-git-send-email-peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
2ed1ebcf6 "timer: replace time() with QEMU_CLOCK_HOST" broke compile
when configured with --enable-profiler. Turned out the profiler has been
broken for a while.
This does s/qemu_time/tcg_time/ as the profiler only works in a TCG mode.
This also fixes the compile error.
This changes profile_getclock() to return nanoseconds rather than
CPU ticks as the "profile" HMP command prints seconds and there is no
platform-independent way to get ticks-per-second rate.
Since TCG is quite slow and get_clock() returns nanoseconds (fine
enough), this should not affect precision much.
This removes unused qemu_time_start and tlb_flush_time.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <1426478258-29961-1-git-send-email-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When requesting a size which cannot be read, the error message shows
a different address which is misleading to the user and it looks like
something's wrong with the address parsing. This is because the input
@addr variable is incremented in the memory dumping loop:
(qemu) memsave 0xffffffff8418069c 0xb00000 mem
Invalid addr 0xffffffff849ffe9c specified
Fix that by saving the original address and size and use them in the
error message:
(qemu) memsave 0xffffffff8418069c 0xb00000 mem
Invalid addr 0xffffffff8418069c/size 11534336 specified
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
For good measure, ensure that the following sequence:
thread 1 calls qemu_mutex_lock_iothread
thread 2 calls qemu_mutex_lock_iothread
VCPU thread are created
VCPU thread enters execution loop
results in the VCPU threads letting the other two threads run
and obeying iothread_requesting_mutex even if the VCPUs are
not halted. To do this, check iothread_requesting_mutex
before execution starts.
Tested-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When two threads (other than the low-priority TCG VCPU thread)
are competing for the iothread lock, a deadlock can happen. This
is because iothread_requesting_mutex is set to false by the first
thread that gets the mutex, and then the VCPU thread might never
yield from the execution loop. If iothread_requesting_mutex is
changed from a bool to a counter, the deadlock is fixed.
However, there is another bug in qemu_mutex_lock_iothread that
can be triggered by the new call_rcu thread. The bug happens
if qemu_mutex_lock_iothread is called before the CPUs are
created. In that case, first_cpu is NULL and the caller
segfaults in qemu_mutex_lock_iothread. To fix this, just
do not do the kick if first_cpu is NULL.
Reported-by: Leon Alrae <leon.alrae@imgtec.com>
Reported-by: Andreas Gustafsson <gson@gson.org>
Tested-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- vhost-scsi: add bootindex property
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
# gpg: Signature made Mon Feb 16 16:32:32 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (21 commits)
Convert ram_list to RCU
exec: convert ram_list to QLIST
cosmetic changes preparing for the following patches
exec: protect mru_block with RCU
rcu: add g_free_rcu
rcu: introduce RCU-enabled QLIST
exec: RCUify AddressSpaceDispatch
exec: make iotlb RCU-friendly
exec: introduce cpu_reload_memory_map
docs: clarify memory region lifecycle
pci: split shpc_cleanup and shpc_free
pcie: remove mmconfig memory leak and wrap mmconfig update with transaction
memory: keep the owner of the AddressSpace alive until do_address_space_destroy
rcu: run RCU callbacks under the BQL
rcu: do not let RCU callbacks pile up indefinitely
vhost-scsi: set the bootable value of channel/target/lun
vhost-scsi: add a property for booting
vhost-scsi: expose the TYPE_FW_PATH_PROVIDER interface
vhost-scsi: add bootindex property
qdev: support to get a device firmware path directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Note that even after this patch, most callers of address_space_*
functions must still be under the big QEMU lock, otherwise the memory
region returned by address_space_translate can disappear as soon as
address_space_translate returns. This will be fixed in the next part
of this series.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
qemu_clock_run_timers() only takes care of main_loop_tlg, we shouldn't
forget aio timer list groups.
Currently, the qemu_clock_deadline_ns_all (a few lines above) counts all
the timergroups of this clock type, including aio tlg, but we don't fire
them, so they are never cleared, which makes a dead loop.
For example, this function hangs when trying to drive throttled block
request queue with qtest clock_step.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421661103-29153-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
With the introduction of QEMU_CLOCK_VIRTUAL_RT, the computation of
sc->diff_clk can be simplified nicely:
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
qemu_clock_get_ns(QEMU_CLOCK_REALTIME) +
cpu_get_clock_offset()
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - cpu_get_clock_offset())
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME) + timers_state.cpu_clock_offset)
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) -
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL_RT)
Cc: Sebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix mismatch between timer_new_ms and timer_mod.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This unbreaks linux-user (broken by e511b4d, cpu-exec: reset exception_index
correctly, 2014-11-26).
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1418989994-17244-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This patch makes icount warp use the new QEMU_CLOCK_VIRTUAL_RT clock.
This way, icount's QEMU_CLOCK_VIRTUAL will never count time during which
the virtual machine is stopped.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Separate accessing the instruction counter from the compensation for
speed and halting that are introduced by qemu_icount_bias. This
introduces new infrastructure used by the record/replay patches.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch sets can_do_io function to allow reading icount
within cpu-exec, but outside TB execution.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Exception index is reset at every entry at every entry into cpu_exec()
function. This may cause missing the exceptions while replaying them.
This patch moves exception_index reset to the locations where they are
processed.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce cpu_clean_all_dirty, to force subsequent cpu_synchronize_all_states
to read in-kernel register state.
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Ticks and clock offset used by CPU timers have to be saved in vmstate.
But vmstate for these fields registered only in icount mode.
Missing registration leads to breaking the continuity when vmstate is loaded.
This patch introduces new initialization function which fixes this.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add TriCore target stubs, and QOM cpu, and Maintainer
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-id: 1409572800-4116-2-git-send-email-kbastian@mail.uni-paderborn.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This implements an NMI interface for s390 and s390-ccw machines.
This removes #ifdef s390 branch in qmp_inject_nmi so new s390's
nmi_monitor_handler() callback is going to be used for NMI.
Since nmi_monitor_handler()-calling code is platform independent,
CPUState::cpu_index is used instead of S390CPU::env.cpu_num.
There should not be any change in behaviour as both @cpu_index and
@cpu_num are global CPU numbers.
Note that s390_cpu_restart() already takes care of the specified cpu,
so we don't need to schedule via async_run_on_cpu().
Since the only error s390_cpu_restart() can return is ENOSYS, convert
it to QERR_UNSUPPORTED.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This introduces an NMI (Non Maskable Interrupt) interface with
a single nmi_monitor_handler() method. A machine or a device can
implement it. This searches for an QOM object with this interface
and if it is implemented, calls it. The callback implements an action
required to cause debug crash dump on in-kernel debugger invocation.
The callback returns Error**.
This adds a nmi_monitor_handle() helper which walks through
all objects to find the interface. The interface method is called
for all found instances.
This adds support for it in qmp_inject_nmi(). Since no architecture
supports it at the moment, there is no change in behaviour.
This changes inject-nmi command description for HMP and QMP.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Show in 'info jit' the current delay between the host clock
and the guest clock. In addition, print the maximum advance
and delay of the guest compared to the host.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The goal is to sleep qemu whenever the guest clock
is in advance compared to the host clock (we use
the monotonic clocks). The amount of time to sleep
is calculated in the execution loop in cpu_exec.
At first, we tried to approximate at each for loop the real time elapsed
while searching for a TB (generating or retrieving from cache) and
executing it. We would then approximate the virtual time corresponding
to the number of virtual instructions executed. The difference between
these 2 values would allow us to know if the guest is in advance or delayed.
However, the function used for measuring the real time
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive.
We had an added overhead of 13% of the total run time.
Therefore, we modified the algorithm and only take into account the
difference between the 2 clocks at the begining of the cpu_exec function.
During the for loop we try to reduce the advance of the guest only by
computing the virtual time elapsed and sleeping if necessary. The overhead
is thus reduced to 3%. Even though this method still has a noticeable
overhead, it no longer is a bottleneck in trying to achieve a better
guest frequency for which the guest clock is faster than the host one.
As for the the alignement of the 2 clocks, with the first algorithm
the guest clock was oscillating between -1 and 1ms compared to the host clock.
Using the second algorithm we notice that the guest is 5ms behind the host, which
is still acceptable for our use case.
The tests where conducted using fio and stress. The host machine in an i5 CPU at
3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb
built with buildroot.
Currently, on our test machine, the lowest icount we can achieve that is suitable for
aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are
slower than the cpu tests (using stress).
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The align option is used for activating the align algorithm
in order to synchronise the host clock and the guest clock.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make icount parameter use QemuOpts style options in order
to easily add other suboptions.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: Camille Bégué <camille.begue@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When using the icount option on ARM, the virtual
clock starts counting at realtime clock but it
should start at 0.
The reason why the virtual clock starts at realtime clock
is because the first time we call qemu_clock_warp (which
calls icount_warp_rt) in tcg_exec_all, qemu_icount_bias
(which is part of the virtual time computation mechanism)
will increment by realtime - vm_clock_warp_start, with
vm_clock_warp_start being 0 (see icount_warp_rt in cpus.c).
By changing the value of vm_clock_warp_start from 0 to -1,
the first time we call qemu_clock_warp which calls
icount_warp_rt, we will return immediatly because
icount_warp_rt first checks if vm_clock_warp_start is -1
and if it's the case it returns. Therefore, qemu_icount_bias
will first be incremented by the value of a virtual timer
deadline when the virtual cpu goes from active to inactive.
The virtual time will start at 0 and increment based
on the instruction counter when the vcpu is active or
the qemu_icount_bias value when inactive.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This adds cpu_icount_to_ns function which is needed for reverse execution.
It returns the time for a specific instruction.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This fixes a bug where qemu_icount and qemu_icount_bias are not migrated.
It adds a subsection "timer/icount" to vmstate_timers so icount is migrated only
when needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This puts qemu_icount and qemu_icount_bias into TimerState structure to allow
them to be migrated.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.
Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).
qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user. This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: comment tweaks
|
|
Use dedicated qemu_soonest_timeout() instead of MIN().
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
These functions don't need type casts (as does cpu_physical_memory_rw)
and also make the code better readable.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Reset it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Rename can_do_io() to cpu_can_do_io() and change argument to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
