aboutsummaryrefslogtreecommitdiff
path: root/contrib/libvhost-user
AgeCommit message (Collapse)Author
2020-06-12libvhost-user: advertise vring featuresStefan Hajnoczi
libvhost-user implements several vring features without advertising them. There is no way for the vhost-user master to detect support for these features. Things more or less work today because QEMU assumes the vhost-user backend always implements certain feature bits like VIRTIO_RING_F_EVENT_IDX. This is not documented anywhere. This patch explicitly advertises features implemented in libvhost-user so that the vhost-user master does not need to make undocumented assumptions. Feature bits that libvhost-user now advertises can be removed from vhost-user-blk.c. Devices should not be responsible for advertising vring feature bits, that is libvhost-user's job. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200529161338.456017-1-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-12Lift max ram slots limit in libvhost-userRaphael Norwitz
Historically, VMs with vhost-user devices could hot-add memory a maximum of 8 times. Now that the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS protocol feature has been added, VMs with vhost-user backends which support this new feature can support a configurable number of ram slots up to the maximum supported by the target platform. This change adds VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS support for backends built with libvhost-user, and increases the number of supported ram slots from 8 to 32. Memory hot-add, hot-remove and postcopy migration were tested with the vhost-user-bridge sample. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1588533678-23450-11-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-12Support individual region unmap in libvhost-userRaphael Norwitz
When the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS protocol feature is enabled, on memory hot-unplug qemu will transmit memory regions to remove individually using the new message VHOST_USER_REM_MEM_REG message. With this change, vhost-user backends build with libvhost-user can now unmap individual memory regions when receiving the VHOST_USER_REM_MEM_REG message. Qemu only sends VHOST_USER_REM_MEM_REG messages when the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS feature is negotiated, and support for that feature has not yet been added in libvhost-user, this new functionality is not yet used. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1588533678-23450-10-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-12Support adding individual regions in libvhost-userRaphael Norwitz
When the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS is enabled, qemu will transmit memory regions to a backend individually using the new message VHOST_USER_ADD_MEM_REG. With this change vhost-user backends built with libvhost-user can now map in new memory regions when VHOST_USER_ADD_MEM_REG messages are received. Qemu only sends VHOST_USER_ADD_MEM_REG messages when the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS feature is negotiated, and since it is not yet supported in libvhost-user, this new functionality is not yet used. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1588533678-23450-9-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-12Support ram slot configuration in libvhost-userRaphael Norwitz
The VHOST_USER_GET_MAX_MEM_SLOTS message allows a vhost-user backend to specify a maximum number of ram slots it is willing to support. This change adds support for libvhost-user to process this message. For now the backend will reply with 8 as the maximum number of regions supported. libvhost-user does not yet support the vhost-user protocol feature VHOST_USER_PROTOCOL_F_CONFIGIRE_MEM_SLOTS, so qemu should never send the VHOST_USER_GET_MAX_MEM_SLOTS message. Therefore this new functionality is not currently used. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1588533678-23450-8-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-06-12Refactor out libvhost-user fault generation logicRaphael Norwitz
In libvhost-user, the incoming postcopy migration path for setting the backend's memory tables has become convolued. In particular, moving the logic which starts generating faults, having received the final ACK from qemu can be moved to a separate function. This simplifies the code substantially. This logic will also be needed by the postcopy path once the VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS feature is supported. Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <1588533678-23450-7-git-send-email-raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-03-16misc: Replace zero-length arrays with flexible array member (automatic)Philippe Mathieu-Daudé
Description copied from Linux kernel commit from Gustavo A. R. Silva (see [3]): --v-- description start --v-- The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member [1], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being unadvertenly introduced [2] to the Linux codebase from now on. --^-- description end --^-- Do the similar housekeeping in the QEMU codebase (which uses C99 since commit 7be41675f7cb). All these instances of code were found with the help of the following Coccinelle script: @@ identifier s, m, a; type t, T; @@ struct s { ... t m; - T a[0]; + T a[]; }; @@ identifier s, m, a; type t, T; @@ struct s { ... t m; - T a[0]; + T a[]; } QEMU_PACKED; [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f [3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1 Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-27libvhost-user: implement in-band notificationsJohannes Berg
Add support for VHOST_USER_PROTOCOL_F_IN_BAND_NOTIFICATIONS, but as it's not desired by default, don't enable it unless the device implementation opts in by returning it from its protocol features callback. Note that I updated vu_set_vring_err_exec(), but didn't add any sending of the VHOST_USER_SLAVE_VRING_ERR message as there's no write to the err_fd today either. This also adds vu_queue_notify_sync() which can be used to force a synchronous notification if inband notifications are supported. Previously, I had left out the slave->master direction handling of F_REPLY_ACK, this now adds some code to support it as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Message-Id: <20200123081708.7817-7-johannes@sipsolutions.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-27libvhost-user: handle NOFD flag in call/kick/err betterJohannes Berg
The code here is odd, for example will it print out invalid file descriptor numbers that were never sent in the message. Clean that up a bit so it's actually possible to implement a device that uses polling. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Message-Id: <20200123081708.7817-5-johannes@sipsolutions.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-27libvhost-user-glib: use g_main_context_get_thread_default()Johannes Berg
If we use NULL, we just get the main program default mainloop here. Using g_main_context_get_thread_default() has basically the same effect, but it lets us start different devices in different threads with different mainloops, which can be useful. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Message-Id: <20200123081708.7817-4-johannes@sipsolutions.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-27libvhost-user-glib: fix VugDev main fd cleanupJohannes Berg
If you try to make a device implementation that can handle multiple connections and allow disconnections (which requires overriding the VHOST_USER_NONE handling), then glib will warn that we remove a src while it's still on the mainloop, and will poll() an FD that doesn't exist anymore. Fix this by making vug_source_new() require pairing with the new vug_source_destroy() so we can keep the GSource referenced in the meantime. Note that this requires calling the new API in vhost-user-input. vhost-user-gpu also uses vug_source_new(), but never seems to free the result at all, so I haven't changed anything there. Fixes: 8bb7ddb78a1c ("libvhost-user: add glib source helper") Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Message-Id: <20200123081708.7817-3-johannes@sipsolutions.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-02-27libvhost-user: implement VHOST_USER_PROTOCOL_F_REPLY_ACKJohannes Berg
This is really simple, since we know whether a response is already requested or not, so we can just send a (successful) response when there isn't one already. Given that, it's not all _that_ useful but the master can at least be sure the message was processed, and we can exercise more code paths using the example code. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Message-Id: <20200123081708.7817-2-johannes@sipsolutions.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-23libvhost-user: Fix some memtable remap casesDr. David Alan Gilbert
If a new setmemtable command comes in once the vhost threads are running, it will remap the guests address space and the threads will now be looking in the wrong place. Fortunately we're running this command under lock, so we can update the queue mappings so that threads will look in the new-right place. Note: This doesn't fix things that the threads might be doing without a lock (e.g. a readv/writev!) That's for another time. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-01-23contrib/libvhost-user: Protect slave fd with mutexDr. David Alan Gilbert
In future patches we'll be performing commands on the slave-fd driven by commands on queues, since those queues will be driven by individual threads we need to make sure they don't attempt to use the slave-fd for multiple commands in parallel. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-11-20libvhost-user: Zero memory allocated for VuVirtqInflightDescXie Yongji
Use a zero-initialized VuVirtqInflightDesc struct to avoid that scan-build reports that vq->resubmit_list[0].counter may be garbage value in vu_check_queue_inflights(). Fixes: 5f9ff1eff ("libvhost-user: Support tracking inflight I/O in shared memory") Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Xie Yongji <xieyongji@baidu.com> Message-Id: <20191119075759.4334-1-xieyongji@baidu.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-04libvhost-user: introduce and use vu_has_protocol_feature()Johannes Berg
This simplifies the various has_feature() checks, we already have vu_has_feature() but it checks features, not protocol features. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Message-Id: <20190904065021.1360-1-johannes@sipsolutions.net> Reviewed-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-04libvhost-user: fix SLAVE_SEND_FD handlingJohannes Berg
It doesn't look like this could possibly work properly since VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD is defined to 10, but the dev->protocol_features has a bitmap. I suppose the peer this was tested with also supported VHOST_USER_PROTOCOL_F_LOG_SHMFD, in which case the test would always be false, but nevertheless the code seems wrong. Use has_feature() to fix this. Fixes: d84599f56c82 ("libvhost-user: support host notifier") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Message-Id: <20190903200422.11693-1-johannes@sipsolutions.net> Reviewed-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04libvhost-user: implement VHOST_USER_PROTOCOL_F_MQStefan Hajnoczi
Existing vhost-user device backends, including vhost-user-scsi and vhost-user-blk, support multiqueue but libvhost-user currently does not advertise this. VHOST_USER_PROTOCOL_F_MQ enables the VHOST_USER_GET_QUEUE_NUM request needed for a vhost-user master to query the number of queues. For example, QEMU's vhost-user-net master depends on VHOST_USER_PROTOCOL_F_MQ for multiqueue. If you're wondering how any device backend with more than one virtqueue functions today, it's because device types with a fixed number of virtqueues do not require querying the number of queues. Therefore the vhost-user master for vhost-user-input with 2 virtqueues, for example, doesn't actually depend on VHOST_USER_PROTOCOL_F_MQ. It just enables virtqueues 0 and 1 without asking. Let there be multiqueue! Suggested-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190626074815.19994-4-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04libvhost-user: support many virtqueuesStefan Hajnoczi
Currently libvhost-user is hardcoded to at most 8 virtqueues. The device backend should decide the number of virtqueues, not libvhost-user. This is important for multiqueue device backends where the guest driver needs an accurate number of virtqueues. This change breaks libvhost-user and libvhost-user-glib API stability. There is no stability guarantee yet, so make this change now and update all in-tree library users. This patch touches up vhost-user-blk, vhost-user-gpu, vhost-user-input, vhost-user-scsi, and vhost-user-bridge. If the device has a fixed number of queues that exact number is used. Otherwise the previous default of 8 virtqueues is used. vu_init() and vug_init() can now fail if malloc() returns NULL. I considered aborting with an error in libvhost-user but it should be safe to instantiate new vhost-user instances at runtime without risk of terminating the process. Therefore callers need to handle the vu_init() failure now. vhost-user-blk and vhost-user-scsi duplicate virtqueue index checks that are already performed by libvhost-user. This code would need to be modified to use max_queues but remove it completely instead since it's redundant. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190626074815.19994-3-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04libvhost-user: add vmsg_set_reply_u64() helperStefan Hajnoczi
The VhostUserMsg request is reused as the reply by message processing functions. This is risky since request fields may corrupt the reply if the vhost-user message handler function forgets to re-initialize them. Changing this practice would be very invasive but we can introduce a helper function to make u64 payload replies safe. This also eliminates code duplication in message processing functions. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190626074815.19994-2-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-29vhost-user: add vhost_user_gpu_set_socket()Marc-André Lureau
Add a new vhost-user message to give a unix socket to a vhost-user backend for GPU display updates. Back when I started that work, I added a new GPU channel because the vhost-user protocol wasn't bidirectional. Since then, there is a vhost-user-slave channel for the slave to send requests to the master. We could extend it with GPU messages. However, the GPU protocol is quite orthogonal to vhost-user, thus I chose to have a new dedicated channel. See vhost-user-gpu.rst for the protocol details. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190524130946.31736-2-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-22libvhost-user: fix -Werror=format= on ppc64Marc-André Lureau
That should fix the following warning: /home/pm215/qemu/contrib/libvhost-user/libvhost-user.c: In function ‘vu_set_mem_table_exec_postcopy’: /home/pm215/qemu/contrib/libvhost-user/libvhost-user.c:666:9: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘__u64’ [-Werror=format=] DPRINT("%s: region %d: Registered userfault for %llx + %llx\n", ^ /home/pm215/qemu/contrib/libvhost-user/libvhost-user.c:666:9: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 6 has type ‘__u64’ [-Werror=format=] cc1: all warnings being treated as errors Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190514104126.6294-3-marcandre.lureau@redhat.com { kraxel: s/PRIu64/PRIx64/ ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-22libvhost-user: fix cast warnings on 32 bitsMarc-André Lureau
Fixes warnings: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190514104126.6294-2-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-20libvhost-user: fix bad vu_log_writeLi Feng
Mark dirty as page, the step of each call is 1. Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <20190420091016.213160-1-fengli@smartx.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-10libvhost-user: add PROTOCOL_F_CONFIG if {set, get}_configMarc-André Lureau
Add the config protocol feature bit if the set_config & get_config callbacks are implemented. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190503130034.24916-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-10libvhost-user: fix -Waddress-of-packed-memberMarc-André Lureau
/home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c: In function ‘vu_set_mem_table_exec_postcopy’: /home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c:546:31: warning: taking address of packed member of ‘struct VhostUserMsg’ may result in an unaligned pointer value [-Waddress-of-packed-member] 546 | VhostUserMemory *memory = &vmsg->payload.memory; | ^~~~~~~~~~~~~~~~~~~~~ /home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c: In function ‘vu_set_mem_table_exec’: /home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c:688:31: warning: taking address of packed member of ‘struct VhostUserMsg’ may result in an unaligned pointer value [-Waddress-of-packed-member] 688 | VhostUserMemory *memory = &vmsg->payload.memory; | ^~~~~~~~~~~~~~~~~~~~~ /home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c: In function ‘vu_set_vring_addr_exec’: /home/elmarco/src/qemu/contrib/libvhost-user/libvhost-user.c:817:36: warning: taking address of packed member of ‘struct VhostUserMsg’ may result in an unaligned pointer value [-Waddress-of-packed-member] 817 | struct vhost_vring_addr *vra = &vmsg->payload.addr; | ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190503130034.24916-2-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targetsCao Jiaxi
gcc_struct is for x86 only, and it generates an warning on ARM64 Clang/MinGW targets. Signed-off-by: Cao Jiaxi <driver1998@foxmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20190503003618.10089-1-driver1998@foxmail.com [PMM: dropped the slirp change as slirp is now a submodule] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12libvhost-user: Support tracking inflight I/O in shared memoryXie Yongji
This patch adds support for VHOST_USER_GET_INFLIGHT_FD and VHOST_USER_SET_INFLIGHT_FD message to set/get shared buffer to/from qemu. Then backend can track inflight I/O in this buffer. Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Message-Id: <20190228085355.9614-5-xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12libvhost-user: Introduce vu_queue_map_desc()Xie Yongji
Introduce vu_queue_map_desc() which should be independent with vu_queue_pop(); Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190228085355.9614-4-xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12libvhost-user: Remove unnecessary FD flag check for event file descriptorsXie Yongji
The vu_check_queue_msg_file() has checked the FD flag. So let's delete the redundant check after it. Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Message-Id: <20190228085355.9614-3-xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12libvhost-user: add vu_queue_unpop()Marc-André Lureau
vhost-user-input will make use of this function to undo some queue pop in case the virtio queue does not have enough room. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190308140454.32437-11-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12libvhost-user-glib: export vug_source_new()Marc-André Lureau
Simplify the creation of FD sources for other users. This is just convenience to avoid duplicating similar code elsewhere. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190308140454.32437-10-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12libvhost-user: exit by default on VHOST_USER_NONEMarc-André Lureau
Since commit 2566378d6d13bf4d28c7770bdbda5f7682594bbe, libvhost-user no longer panics on disconnect (rc == 0), and instead silently ignores an invalid VHOST_USER_NONE message. Without extra work from the API user, this will simply busy-loop on HUP events. The obvious thing to do is to exit(0) instead, while additional or different work can be done by overriding iface->process_msg(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20190308140454.32437-5-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12libvhost-user: fix clang enum-conversion warningMarc-André Lureau
Now that the VhostUserMsg.request field is used for both master & slave requests, since commit d84599f56c820d8c1ac9928a76500dcdfbbf194d: contrib/libvhost-user/libvhost-user.c:953:20: error: implicit conversion from enumeration type 'enum VhostUserSlaveRequest' to different enumeration type 'VhostUserRequest' (aka 'enum VhostUserRequest') [-Werror,-Wenum-conversion] .request = VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190308140454.32437-2-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-05contrib/libvhost-user: cleanup castsMichael S. Tsirkin
Now that field types are all properly uint64_t, drop the un-necessary cast. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-04contrib/libvhost-user: switch to uint64_tMichael S. Tsirkin
contrib/libvhost-user is now using __u64 which is a long long. New linux headers will use uint64_t. These need to be printed differently: llx versus PRIx64. For now cast to uint64_t for portability so the change does not break the build. Casts will go away in the future. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24libvhost-user: support host notifierTiwei Bie
This patch introduces the host notifier support in libvhost-user. A new API is added to support setting host notifier for each queue. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23libvhost-user: Send messages with no dataDr. David Alan Gilbert
The response to a VHOST_USER_POSTCOPY_ADVISE contains a fd but doesn't actually contain any data. FIx vu_message_write so that it doesn't do a 0-byte write() call, since this was ending up with rc=0 that was confusing the error handling code. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-04-09contrib/libvhost-user: add the protocol feature used for SET/GET messageChangpeng Liu
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20libvhost-user: Claim support for postcopyDr. David Alan Gilbert
Tell QEMU we understand the protocol features needed for postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost-user: Add VHOST_USER_POSTCOPY_END messageDr. David Alan Gilbert
This message is sent just before the end of postcopy to get the client to stop using userfault since we wont respond to any more requests. It should close userfaultfd so that any other pages get mapped to the backing file automatically by the kernel, since at this point we know we've received everything. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20libvhost-user: mprotect & madvises for postcopyDr. David Alan Gilbert
Clear the area and turn off THP. PROT_NONE the area until after we've userfault advised it to catch any unexpected changes. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Send address back to qemuDr. David Alan Gilbert
We need a better way, but at the moment we need the address of the mappings sent back to qemu so it can interpret the messages on the userfaultfd it reads. This is done as a 3 stage set: QEMU -> client set_mem_table mmap stuff, get addresses client -> qemu here are the addresses qemu -> client OK - now you can use them That ensures that qemu has registered the new addresses in it's userfault code before the client starts accessing them. Note: We don't ask for the default 'ack' reply since we've got our own. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20libvhost-user+postcopy: Register new regions with the ufdDr. David Alan Gilbert
When new regions are sent to the client using SET_MEM_TABLE, register them with the userfaultfd. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20postcopy+vhost-user: Split set_mem_table for postcopyDr. David Alan Gilbert
Split the set_mem_table routines in both qemu and libvhost-user because the postcopy versions are going to be quite different once changes in the later patches are added. However, this patch doesn't produce any functional change, just the split. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost+postcopy: Transmit 'listen' to slaveDr. David Alan Gilbert
Notify the vhost-user slave on reception of the 'postcopy-listen' event from the source. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20libvhost-user: Open userfaultfdDr. David Alan Gilbert
Open a userfaultfd (on a postcopy_advise) and send it back in the reply to the qemu for it to monitor. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20libvhost-user: Support sending fds back to qemuDr. David Alan Gilbert
Allow replies with fds (for postcopy) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' messageDr. David Alan Gilbert
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE message on an incoming advise. Later patches will fill in the behaviour/contents of the message. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20postcopy: Add vhost-user flag for postcopy and check itDr. David Alan Gilbert
Add a vhost feature flag for postcopy support, and use the postcopy notifier to check it before allowing postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 14:49:56 +0000