| Age | Commit message (Collapse) | Author |
|---|
|
Per default VNC is enabled.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This removes various code duplication from console.e and sdl.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
commit 52c18be9e99dabe295321153fda7fce9f76647ac introduced a regression in the
change vnc password command that changed the behavior of setting the VNC
password to an empty string from disabling login to disabling authentication.
This commit refactors the code to eliminate this overloaded semantics in
vnc_display_password and instead introduces the vnc_display_disable_login. The
monitor implementation then determines the behavior of an empty or missing
string.
Recently, a set_password command was added that allows both the Spice and VNC
password to be set. This command has not shown up in a release yet so the
behavior is not yet defined.
This patch proposes that an empty password be treated as an empty password with
no special handling. For specifically disabling login, I believe a new command
should be introduced instead of overloading semantics.
I'm not sure how Spice handles this but I would recommend that we have Spice
and VNC have consistent semantics here for the 0.14.0 release.
Reported-by: Neil Wilson <neil@aldur.co.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Add a proper return to make sure that login is really disabled instead of
relying on the VNC server to treat empty passwords specially
|
|
On big endian hosts, the curses interface is unusable: the emulated
graphic card only displays garbage, while the monitor interface displays
nothing (or rather only spaces).
The curses interface is waiting for data in native endianness, so
console_write_ch() should not do any conversion. The conversion should
be done when reading the video buffer in hw/vga.c. I supposed this
buffer is in little endian mode, though it's not impossible that the
data is actually in guest endianness. I currently have no big endian
guest to way (they all switch to graphic mode immediately).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
This patch adds support for expiring passwords to vnc. It adds a new
vnc_display_pw_expire() function which specifies the time when the
password will expire.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
If a USB keyboard is unplugged, the keyboard eventhandler is never
removed, and events will continue to be passed through to the device,
causing crashes or memory corruption.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add a new cursor type to console.h and a bunch of functions to
deal with cursors the (new) cursor.c file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Bernhard Kauer <kauer@tudos.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
|
|
Right now, DisplayState clients rely on polling the mouse mode to determine
when the device is changed to an absolute device. Use a notification list to
add an explicit notification.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
kbd_mouse_is_absolute tells us whether the current mouse handler is an absolute
device. kbd_mouse_has_absolute tells us whether we have any device that is
capable of absolute input.
This lets us tell a user that they have configured an absolute device but that
the guest is not currently using it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
And convert usb-hid to use it (to avoid regression with bisection)
Right now, when we do info mice and we've added a usb tablet, we don't see it
until the guest starts using the tablet. We implement this behavior in order
to provide a means to delay registration of a mouse handler since we treat
the last registered handler as the current handler.
This is a usability problem though as we would like to give the user feedback
that they've either 1) not added an absolute device 2) there is an absolute
device but the guest isn't using it 3) we have an absolute device and it's
active.
By using QTAILQ and having an explicit activation function that moves the
handler to the front of the queue, we can implement the same semantics as
before with respect to automatically switching to usb tablet while providing
the user with a whole lot more information.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Adds infrastructure for keyboard led status tracking to qemu.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Moving stuff in console.c to avoid the need for prototypes makes
this patch a bit bigger, but there's no change in the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Return a QDict with server information. Connected clients are returned
as a QList of QDicts.
The new functions (vnc_qdict_remote_addr(), vnc_qdict_local_addr() and
put_addr_qdict()) are used to insert 'host' and 'service' information
in the returned QDict.
This patch is big, but I don't see how to split it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Each mouse is represented by a QDict, the returned QObject is a QList of
all mice.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Some not so obvious bits, slirp and Xen were left alone for the time
being.
Signed-off-by: malc <av1474@comtv.ru>
|
|
new cmd line syntax:
-chardev vc,id=name
-chardev vc,id=name,width=pixels,height=pixels
-chardev vc,id=name,cols=chars,rows=chars
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This commit ports command handlers that receive one argument to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Hi all,
this patch implements zooming capabilities for the sdl interface.
A new sdl_zoom_blit function is added that is able to scale and blit a
portion of a surface into another.
This way we can enable SDL_RESIZABLE and have a real_screen surface with
a different size than the guest surface and let sdl_zoom_blit take care
of the problem.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
--disable-gfx-check predates VNC server support. It made sense back then
because the only thing you could do without SDL was use -nographic mode or
similar tricks. Since this is a very advanced mode of operation, gfx-check
provided a good safety net for casual users.
A casual user is very likely to use VNC to interact with a guest. In fact, it's
often frustrating to install QEMU on a server and have to specify
disable-gfx-check when you only want to use VNC.
This patch eliminates disable-gfx-check and makes SDL behave like every other
optional dependency. If SDL is not available, instead of failing ungracefully
if no special options are specified, we default to -vnc localhost:0,to=99.
When we do default to VNC, we also print a message to tell the user that we've
done this include which port we're currently listening on.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Remove explicit struct qualifiers and rename structure types.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Hi all,
this patch adds a DisplayAllocator interface that allows display
frontends (sdl in particular) to provide a preallocated display buffer
for the graphical backend to use.
Whenever a graphical backend cannot use
qemu_create_displaysurface_from because its own internal pixel format
cannot be exported directly (text mode or graphical mode with color
depth 8 or 24), it creates another display buffer in memory using
qemu_create_displaysurface and does the conversion.
This new buffer needs to be blitted into the sdl surface buffer every time
we need to update portions of the screen.
We can avoid this using the DisplayAllocator interace: sdl provides its
own implementation of qemu_create_displaysurface, giving back the sdl
surface buffer directly (as we used to do before the DisplayState
changes).
Since the buffer returned by sdl could be in bgr format we need to put
back in the handlers of that case.
This approach is good if the two following conditions are true:
1) the sdl surface is a software surface that resides in main memory;
2) the host display color depth is either 16 or 32 bpp.
If first condition is false we can have bad performances using sdl
and vnc together.
If the second condition is false performances are certainly not going to
improve but they shouldn't get worse either.
The first condition is always true, at least on linux/X11 systems; but I
believe is true also on other platforms.
The second condition is true in the vast majority of the cases.
This patch should also have the good side effect of solving the sdl
2D slowness malc was reporting on MacOS, because SDL_BlitSurface is not
going to be called anymore when the guest is in text mode or 24bpp.
However the root problem is still present so I suspect we may
still see some slowness on MacOS when the guest is in 32 or 16 bpp.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6839 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Currently, waiting for the user to type in some password blocks the
whole VM because monitor_readline starts its own I/O loop. And this loop
also screws up reading passwords from virtual console.
Patch below fixes the shortcomings by using normal I/O processing also
for waiting on a password. To keep to modal property for the monitor
terminal, the command handler is temporarily replaced by a password
handler and a callback infrastructure is established to process the
result before switching back to command mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Break readline_show_prompt out of readline_start so that (re-)printing
the prompt can be controlled in a more fine-grained way.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6709 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Reading the passwords for encrypted hard disks during early startup is
broken (I guess for quiet a while now):
- No monitor terminal is ready for input at this point
- Forcing all mux'ed terminals into monitor mode can confuse other
users of that channels
To overcome these issues and to lay the ground for a clean decoupling of
monitor terminals, this patch changes the initial password inquiry as
follows:
- Prevent autostart if there is some encrypted disk
- Once the user tries to resume the VM, prompt for all missing
passwords
- Only resume if all passwords were accepted
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
This patch corrects SDL support on X11 hosts using evdev. It's losely based
on the previous patch by Dustin Kirkland and the evdev support code in gtk-vnc
written by Daniel Berrange.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6678 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
this patch fixes a bug and improves the generic pixel conversion
function in vnc.c.
The bug is that when a new vnc client connects we need to reset the flag
has_WMVi but currently we don't.
The generic pixel conversion function is vnc_convert_pixel and currently
is not very efficient since uses the division and multiplication
operators.
To make it more efficient I changed to use bit shift operators instead.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6441 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
[ The following text is in the "UTF-8" character set. ]
[ Your display is set for the "koi8-r" character set. ]
[ Some characters may be displayed incorrectly. ]
This patch fixes vga rendering when the guest endianness differs from
the host endianness: in this case we can only share the buffer if the
bpp is 32 and we must change the pixelformat accordingly.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6413 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
The DisplayState refactoring changed the machine init function to create a
DisplayState for each VGA device instead of being passed an existing
DisplayState. This change is critical to enable multiple graphics device
support.
Unfortunately, the serial/parallel/console code is structured today to run
before machine init to fill out the CharDriverState table which the machine
init function uses to determine whether to create the required devices.
Since a 'vc' is a type of CharDriverState, the CharDriverState code requires
that a DisplayState exist before it runs creating a circular dependency.
To fix this, this splits the creation of the initial CharDriverState from
the initialization of the text console. We can then in a second step associate
a DisplayState with all TextConsoles. This allows us to create the
CharDriverState's first, machine init, then associate the TextConsoles with
a DisplayState.
This code screams for more cleanup.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6352 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Patch 5/7
This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.
This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.
This patch does *not* include any required changes to any device, these
changes come with the following patches.
Patch 6/7
This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;
In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.
Patch 7/7
This patch updates the graphic device code to use the new
graphical_console_init function.
As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
This patch changes the DisplayState interface adding support for
multiple frontends at the same time (sdl and vnc) and implements most
of the benefit of the shared_buf patch without the added complexity.
Currently DisplayState is managed by sdl (or vnc) and sdl (or vnc) is
also responsible for allocating the data and setting the depth.
Vga.c (or another backend) will do any necessary conversion.
The idea is to change it so that is vga.c (or another backend) together
with console.c that fully manage the DisplayState interface allocating
data and setting the depth (either 16 or 32 bit, if the guest uses a
different resolution or is in text mode, vga.c (or another backend) is
in charge of doing the conversion seamlessly).
The other idea is that DisplayState supports *multiple* frontends
like sdl and vnc; each of them can register some callbacks to be called
when a display event occurs.
The interesting changes are:
- the new structures and related functions in console.h and console.c
in particular the following functions are very helpful to manage a
DisplaySurface:
qemu_create_displaysurface
qemu_resize_displaysurface
qemu_create_displaysurface_from
qemu_free_displaysurface
- console_select and qemu_console_resize in console.c
this two functions manage multiple consoles on a single host display
- moving code around in hw/vga.c
as for the shared_buf patch this is necessary to be able to handle a dynamic
DisplaySurface bpp
- changes to vga_draw_graphic in hw/vga.c
this is the place where the DisplaySurface buffer is shared with the
videoram, when possible;
Compared to the last version the only changes are:
- do not remove support to dpy_copy in cirrus_vga
- change the name of the displaysurface handling functions
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6336 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Do not handle bgr host displays in the backends.
Right now a bgr flag exists so that sdl can set it, if the SDL_Surface
is bgr.
Afterwards the graphic device (e.g. vga.c) does the needed conversion.
With this patch series is sdl that is responsible for rendering the format
provided by the graphic device that must provide a DisplaySurface
(ds->surface) in 16 or 32 bpp, rgb.
Afterwards sdl creates a SDL_Surface from the given DisplaySurface and
blits it into the main SDL_Surface using SDL_BlitSurface.
Everything is handled by sdl transparently, because SDL_BlitSurface is
perfectly capable of handling bgr displays by itself.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6335 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Introducing some accessors:
ds_get_linesize
ds_get_bits_per_pixel
ds_get_width
ds_get_height
ds_get_data
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5789 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Live migration happens in the background, but it is useful to make the monitor
command appear as if it's blocking. This allows a management tool to
immediately know when the live migration has completed without having to poll
the migration status.
This patch allows the monitor to be suspended from a monitor callback which
will prevent new monitor commands from being executed.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5431 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
This partially reverts r4812 to fix an issue highlighted by Ryan Harper
with all vc's being fixed size which prevented backends with resizable
window (curses) from displaying okay.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5309 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
I left a TODO in the code because this still doesn't definitely
fix all issues.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5308 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5071 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5058 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Add idle field to DisplayState struct, so drivers can figure
the display is idle and take advantage of that.
The xen framebuffer driver will use this to communicate the
idle state to the guest, so it knows it can stop doing updates
to a virtual display which is invisible anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5056 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5028 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
This patch repairs the management of encrypted disk images and allows to
enter the password.
Changelog:
v2:
- move read_password() before do_loadvm()
- really start monitor if output is stdio.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4976 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4812 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Add also a facility for setting up touchscreen calibration data per-board
based on calibration data generated by tslib.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4214 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
When SDL is invisible/minimized, there is no need to keep calling the
VGA refresh 33 times per second. This patch reduces in that case the
rate to 2 times per second, which should be responsive enough for the
un-minimizing event.
(Samuel Thibault)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4050 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3976 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
|
