aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)Author
2013-11-25Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pc very last minute fixes for 1.7 This has a fix for a crasher bug with pci bridges, boot failure fix for s390 on 32 bit hosts, and fixes build for hosts with old glib. There's also a fix for --iasl configure flag - it can be used to work around broken iasl on some systems either by using a non-standard iasl or by disabling it. I've also reverted a e1000/rtl mac programming change that seems slightly wrong and too risky for 1.8. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 25 Nov 2013 03:40:07 AM PST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (5) and Bandan Das (1) # Via Michael S. Tsirkin * mst/tags/for_anthony: configure: make --iasl option actually work Revert "e1000/rtl8139: update HMP NIC when every bit is written" acpi-build: fix build on glib < 2.14 acpi-build: fix build on glib < 2.22 pci: unregister vmstate_pcibus on unplug s390x: fix flat file load on 32 bit systems Message-id: 1385379990-32093-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-24configure: make --iasl option actually workMichael S. Tsirkin
--iasl option was added to CC option parsing section by mistake, it's not effective there and attempts to use cause an 'unknown option' error. Fix this up. Tested-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-21configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0Peter Maydell
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be explicitly specifying everything and not relying on any default variables or rules. However we were accidentally relying on the default ARFLAGS ("rv"). This went unnoticed because of a bug in GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS only affected submakes, not the currently running instance. Explicitly set ARFLAGS in config-host.mak, in the same way we handle CFLAGS and LDFLAGS; this will allow us to work with Make 4.0. Thanks to Paul Smith for analyzing this bug for us. Cc: qemu-stable@nongnu.org Reported-by: Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-19Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Jan Krupa (4) and others # Via Michael Tokarev * mjt/trivial-patches: hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently configure: Use -B switch only for Python versions which support it qga: Fix shutdown command of guest agent to work with SysV console: Remove unused debug code qga: Fix compilation for old versions of MinGW .travis.yml: basic compile and check recipes pci-assign: Fix error_report of pci-stub message qapi: Fix comment for create-type to match code. vl: fix build when configured with no graphic support usb: drop unused USBNetState.inpkt field qemu-char: add missing characters used in keymaps qemu-char: add support for U-prefixed symbols qemu-char: add Czech keymap file qemu-char: add Czech characters to VNC keysyms Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-17configure: Use -B switch only for Python versions which support itStefan Weil
Commit 1d984a67a95d88f3e708b077dab8adeb47c38c93 added the -B switch unconditionally. This breaks Python versions before 2.6 which don't support that switch. Now configure adds -B only if it is accepted by the Python interpreter. This modification introduces a small incompatibility because -B might now also be added when configure was called with --python=PYTHON_INTERPRETER. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-13Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
# By Jeff Cody (26) and others # Via Stefan Hajnoczi * stefanha/block: (37 commits) block: Round up total_sectors block: vhdx qemu-iotest - log replay of data sector block: qemu-iotests for vhdx, add write test support block: vhdx - update _make_test_img() to filter out vhdx options block: vhdx - add .bdrv_create() support block: vhdx - fix comment typos in header, fix incorrect struct fields block: vhdx - break out code operations to functions block: vhdx - move more endian translations to vhdx-endian.c block: vhdx - remove BAT file offset bit shifting block: vhdx write support block: vhdx - add log write support block: vhdx - add region overlap detection for image files block: vhdx - log parsing, replay, and flush support block: vhdx code movement - move vhdx_close() above vhdx_open() block: vhdx - update log guid in header, and first write tracker block: vhdx - break endian translation functions out block: vhdx - log support struct and defines block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header. block: vhdx - add header update capability. block: vhdx - minor comments and typo correction. ... Message-id: 1383905551-16411-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-07block: vhdx - add header update capability.Jeff Cody
This adds the ability to update the headers in a VHDX image, including generating a new MS-compatible GUID. As VHDX depends on uuid.h, VHDX is now a configurable build option. If VHDX support is enabled, that will also enable uuid as well. The default is to have VHDX enabled. To enable/disable VHDX: --enable-vhdx, --disable-vhdx Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-07configure: Add config.status to recreate the current configurationStefan Weil
The latest configure invocation was saved in config-host.mak and could be extracted from that file to recreate the configuration. Now it is saved in a new file config.status which can be directly executed to recreate the configuration. The file name and the comments were copied from GNU autoconf. Makefile now uses config.status, but also includes transitional code for the old mechanism. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Fam Zheng <famz@redhat.com>
2013-11-05configure: detect endian via compile testMike Frysinger
This avoids needing to execute a program and keeping an (incomplete) list when cross-compiling. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Tested-by: James Hogan <james.hogan@imgtec.com> [mips] Message-id: 1372649418-4987-1-git-send-email-vapier@gentoo.org Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-31Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
* mjt/trivial-patches: audio/mixeng_template.h: fix inline declaration misc: Spelling and grammar fixes in comments docs/ccid.txt: fix the typo qapi: fix documentation example .gitignore: ignore qmp-commands.txt misc: New spelling fixes in comments configure: create fsdev/ directory Message-id: 1382779887-15971-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-31Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci, pc, acpi fixes, enhancements This includes some pretty big changes: - pci master abort support by Marcel - pci IRQ API rework by Marcel - acpi generation support by myself Everything has gone through several revisions, latest versions have been on list for a while without any more comments, tested by several people. Please pull for 1.7. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found * mst/tags/for_anthony: (39 commits) ssdt-proc: update generated file ssdt: fix PBLK length i386: ACPI table generation code from seabios pc: use new api to add builtin tables acpi: add interface to access user-installed tables hpet: add API to find it pvpanic: add API to access io port ich9: APIs for pc guest info piix: APIs for pc guest info acpi/piix: add macros for acpi property names i386: define pc guest info loader: allow adding ROMs in done callbacks i386: add bios linker/loader loader: use file path size from fw_cfg.h acpi: ssdt pcihp: updat generated file acpi: pre-compiled ASL files acpi: add rules to compile ASL source i386: add ACPI table files from seabios q35: expose mmcfg size as a property q35: use macro for MCFG property name ... Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-26configure: create fsdev/ directoryMichael Tokarev
In some cases when building with parallelism (make -jN), build fails because the directory where output files are supposed to be does not exist. In particular, when make decides to build virtfs-proxy-helper.1 before other files in fsdev/, build will fail with the following error: perl -Ww -- BUILDDIR/scripts/texi2pod.pl BUILDDIR/fsdev/virtfs-proxy-helper.texi fsdev/virtfs-proxy-helper.pod && pod2man --utf8 --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > fsdev/virtfs-proxy-helper.1 opening "fsdev/virtfs-proxy-helper.pod": No such file or directory Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-14acpi: add rules to compile ASL sourceMichael S. Tsirkin
Detect presence of IASL compiler and use it to process ASL source. If not there, use pre-compiled files in-tree. Add script to update the in-tree files. Note: distros are known to silently update iasl so detect correct iasl flags for the installed version on each run as opposed to at configure time. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-10configure: Remove CONFIG_QEMU_LDST_OPTIMIZATIONRichard Henderson
No longer used. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg-hppa: Remove tcg backendRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-30Merge remote-tracking branch 'rth/tcg-ppc-pull' into stagingAnthony Liguori
# By Richard Henderson (19) and Paolo Bonzini (2) # Via Richard Henderson * rth/tcg-ppc-pull: (21 commits) tcg-ppc64: Implement CONFIG_QEMU_LDST_OPTIMIZATION tcg-ppc64: Add _noaddr functions for emitting forward branches tcg-ppc64: Streamline tcg_out_tlb_read tcg-ppc64: Implement tcg_register_jit tcg-ppc64: Handle long offsets better tcg-ppc64: Tidy register allocation order tcg-ppc64: Look through a constant function descriptor tcg-ppc64: Fold constant call address into descriptor load tcg-ppc64: Don't load the static chain from TCG tcg-ppc64: Avoid code for nop move tcg-ppc64: Use tcg_out64 tcg-ppc64: Use TCG_REG_Rn constants tcg-ppc64: More use of TAI and SAI helper macros tcg-ppc64: Reformat tcg-target.c tcg-ppc: Fix and cleanup tcg_out_tlb_check tcg-ppc: Use conditional branch and link to slow path tcg-ppc: Cleanup tcg_out_qemu_ld/st_slow_path tcg-ppc: Avoid code for nop move tcg-ppc: use new return-argument ld/st helpers tcg-ppc: fix qemu_ld/qemu_st for AIX ABI ... Message-id: 1380126458-3247-1-git-send-email-rth@twiddle.net
2013-09-30Merge remote-tracking branch 'kraxel/audio.1' into stagingAnthony Liguori
# By Bandan Das (3) and Gerd Hoffmann (1) # Via Gerd Hoffmann * kraxel/audio.1: audio: remove CONFIG_MIXEMU configure option hda-codec: make mixemu selectable at runtime hda-codec: refactor common definitions into a header file audio maintainers update Message-id: 1380011943-15083-1-git-send-email-kraxel@redhat.com
2013-09-25tcg-ppc64: Implement CONFIG_QEMU_LDST_OPTIMIZATIONRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-24configure: Allow command-line configure for ppc32Richard Henderson
Similar to manually selecting i386 for an x86_64 host. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-24audio: remove CONFIG_MIXEMU configure optionBandan Das
Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-23Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Stefan Weil (8) and others # Via Michael Tokarev * mjt/trivial-patches: tests/.gitignore: ignore test-throttle exec: Fix broken build for MinGW (regression) kvm: Fix compiler warning (clang) tcg-sparc: Fix parenthesis warning Makefile: Remove some more files when cleaning target-i386: Fix segment cache dump iov: avoid "orig_len may be used unitialized" warning vscclient: remove unnecessary use of uninitialized variable trace-events: Clean up with scripts/cleanup-trace-events.pl again tci: Fix qemu-alpha on 32 bit hosts (wrong assertions) *-user: Improve documentation for lock_user function MAINTAINERS: Add missing entry to filelist for TCI target translate-all: Fix formatting of dump output *-user: Fix typo in comment (ulocking -> unlocking) docs: Fix IO port number for CPU present bitmap. q35: Fix typo in constant DEFUALT -> DEFAULT. configure: Undefine _FORTIFY_SOURCE prior using it Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
2013-09-20configure: Undefine _FORTIFY_SOURCE prior using itMichal Privoznik
Currently, we are enforcing the _FORTIFY_SOURCE=2 without any previous detection if the macro has been already defined, e.g. by environment, or is just enabled by compiler by default. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Jan Vesely <jano.vesely@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-19usb: remove old usb-host codeGerd Hoffmann
The usb-host code has been rewritten for qemu 1.5 to use libusb, the old code has been left in as temporary fallback. Now we are two releases further out, targeting the 1.7 release. No major issues with the new code poped up until now. Time to remove it from tre tree. Should we ever need it again for some reason -- git has a copy for us in the history. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-12coroutine: add ./configure --disable-coroutine-poolStefan Hajnoczi
The 'gthread' coroutine backend was written before the freelist (aka pool) existed in qemu-coroutine.c. This means that every thread is expected to exit when its coroutine terminates. It is not possible to reuse threads from a pool. This patch automatically disables the pool when 'gthread' is used. This allows the 'gthread' backend to work again (for example, tests/test-coroutine completes successfully instead of hanging). I considered implementing thread reuse but I don't want quirks like CPU affinity differences due to coroutine threads being recycled. The 'gthread' backend is a reference backend and it's therefore okay to skip the pool optimization. Note this patch also makes it easy to toggle the pool for benchmarking purposes: ./configure --with-coroutine-backend=ucontext \ --disable-coroutine-pool Reported-by: Gabriel Kerneis <gabriel@kerneis.info> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Gabriel Kerneis <gabriel@kerneis.info> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12qemu-iotests: add unix socket help programWenchao Xia
This program can do a sendmsg call to transfer fd with unix socket, which is not supported in python2. The built binary will not be deleted in clean, but it is a existing issue in ./tests, which should be solved in another patch. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-11Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130910' into ↵Anthony Liguori
staging ARM queue: * aarch64 preparation patchset (excluding the defconfigs, so this doesn't actually enable the new targets yet) * minor bugfixes and cleanups * disable "-cpu any" in system emulation mode * fix ARMv7M stack alignment on reset # gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE # gpg: Can't check signature: public key not found # By Alexander Graf (13) and others # Via Peter Maydell * pmaydell/tags/pull-target-arm-20130910: (28 commits) configure: Add handling code for AArch64 targets linux-user: Add AArch64 support linux-user: Allow targets to specify a minimum uname release linux-user: Add AArch64 termbits.h definitions linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64 linux-user: Make sure NWFPE code is 32 bit ARM only linux-user: Add signal handling for AArch64 linux-user: Fix up AArch64 syscall handlers linux-user: Add syscall number definitions for AArch64 linux-user: Add cpu loop for AArch64 linux-user: Don't treat AArch64 cpu names specially target-arm: Add AArch64 gdbstub support target-arm: Add AArch64 translation stub target-arm: Prepare translation for AArch64 code target-arm: Disable 32 bit CPUs in 64 bit linux-user builds target-arm: Add new AArch64CPUInfo base class and subclasses target-arm: Pass DisasContext* to gen_set_pc_im() target-arm: Fix target_ulong/uint32_t confusions target-arm: Export cpu_env target-arm: Extract the disas struct to a header file ... Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-10configure: Add handling code for AArch64 targetsAlexander Graf
Add the necessary code to configure to handle AArch64 as a target CPU (we already have some code for supporting it as host). Note that this doesn't enable the AArch64 targets yet. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-23-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-12-git-send-email-john.rigby@linaro.org [PMM: * don't need to set TARGET_ABI_DIR to aarch64 as that is the default * don't build nwfpe -- this is 32 bit legacy only * rewrite commit message * add aarch64 to the list of "fdt required" targets ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-09qemu-ga: Add Windows VSS provider and requester as DLLTomoki Sekiyama
Adds VSS provider and requester as a qga-vss.dll, which is loaded by Windows VSS service as well as by qemu-ga. "provider.cpp" implements a basic stub of a software VSS provider. Currently, this module only relays a frozen event from VSS service to the agent, and thaw event from the agent to VSS service, to block VSS process to keep the system frozen while snapshots are taken at the host. To register the provider to the guest system as COM+ application, the type library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl), VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also adds pre-compiled .tlb file in the repository in order to enable cross-compile qemu-ga.exe for Windows with VSS support. "requester.cpp" provides the VSS requester to kick the VSS snapshot process. Qemu-ga.exe works without the DLL, although fsfreeze features are disabled. These functions are only supported in Windows 2003 or later. In older systems, fsfreeze features are disabled. In several versions of Windows which don't support attribute VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error. To solve this fundamentally, we need a framework to handle mount writable snapshot on guests, which is required by VSS auto-recovery feature (cleanup phase after a snapshot is taken). Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09qemu-ga: Add configure options to specify path to Windows/VSS SDKTomoki Sekiyama
To enable VSS support in qemu-ga for Windows, header files included in VSS SDK are required. The VSS support is enabled by the configure option like below: ./configure --with-vss-sdk="/path/to/VSS SDK" If the path is omitted, it tries to search the headers from default paths and VSS support is enabled only if the SDK is found. VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is specified. VSS SDK is available from: http://www.microsoft.com/en-us/download/details.aspx?id=23490 To cross-compile using mingw, you need to setup the SDK on Windows environments to extract headers. You can also extract the SDK headers on POSIX environments using scripts/extract-vss-headers and msitools. In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to specify path to Windows SDK, which may be used for native-compile of .tlb file of qemu-ga VSS provider. However, this is usually unnecessary because pre-compiled .tlb file is included. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09configure: Support configuring C++ compilerTomoki Sekiyama
Add configuration for C++ compiler in configure and Makefiles. The C++ compiler is choosed as following: - ${CXX}, if it is specified. - ${cross_prefix}g++, if ${cross_prefix} is specified. - Otherwise, c++ is used. Currently, usage of C++ language is only for access to Windows VSS using COM+ services in qemu-guest-agent for Windows. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Micael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-03Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Stefan Weil (6) and others # Via Michael Tokarev * mjt/trivial-patches: aio / timers: use g_usleep() not sleep() adlib: sort offsets in portio registration qmp: fix integer usage in examples tci: Remove function tcg_out64 (fix broken build) target-arm: Report unimplemented opcodes (LOG_UNIMP) pflash_cfi02.c: fix debug macro configure: Remove unneeded redirections of stderr (pkg-config --exists) configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs) configure: Don't write .pyc files by default (python -B) curl: qemu_bh_new() can never return NULL slirp/arp_table.c: Avoid shifting into sign bit of signed integers configure: disable clang -Wstring-plus-int warning rdma: silly ipv6 bugfix misc: Fix some typos in names and comments slirp: Port redirection option behave differently on Linux and Windows Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-02configure: Allow x32 as a hostRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-01configure: Remove unneeded redirections of stderr (pkg-config --exists)Stefan Weil
Predicate options (--exists, --atleast-version, ...) of pkg-config dont't print error messages to stderr, so redirecting stderr is not necessary. Combining a predicate option with --modversion is not necessary for tests. Instead of testing with --modversion, --exists can be used. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-01configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)Stefan Weil
For existing libraries, pkg-config --cflags and pkg-config --libs won't print error messages to stderr, so redirecting stderr is not necessary. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-01configure: Don't write .pyc files by default (python -B)Stefan Weil
When a Python script is run, Python normally writes bytecode into a .pyc file. QEMU's build process uses several Python scripts which are called from configure or make. The generated .pyc files take disk space without being of much use, because those scripts are short, not time critical and only called a few times. Python's option -B disables writing of .pyc files. QEMU now uses "python -B" as default, but it is still possible to choose a different call by passing --python=PYTHON to configure. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-01configure: disable clang -Wstring-plus-int warningPeter Maydell
Some versions of clang will warn about adding integers to strings: disas/i386.c:4753:23: error: adding 'char' to a string does not append to the string [-Werror,-Wstring-plus-int] oappend ("%es:" + intel_syntax); ~~~~~~~^~~~~~~~~~~~~~ disas/i386.c:4753:23: note: use array indexing to silence this warning oappend ("%es:" + intel_syntax); ^ & [ ] disas/i386.c uses this idiom to to skip a "%" prefix if using intel rather than AT&T syntax. This seems like a reasonable thing to do, and I don't think anybody contributing to QEMU is likely to believe that '+' is a string concatenation operator in C, so just disable -Wstring-plus-int. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-08-22aio / timers: Add prctl(PR_SET_TIMERSLACK, 1, ...) to reduce timer slackAlex Bligh
Where supported, called prctl(PR_SET_TIMERSLACK, 1, ...) to set one nanosecond timer slack to increase precision of timer calls. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: add ppoll support with qemu_poll_nsAlex Bligh
Add qemu_poll_ns which works like g_poll but takes a nanosecond timeout. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-05Merge remote-tracking branch 'filippov/tags/20130729-xtensa' into stagingAnthony Liguori
xtensa queue 2013-07-29 * filippov/tags/20130729-xtensa: target-xtensa: check register window inline target-xtensa: don't generate dead code to access invalid SRs tests/tcg/xtensa: Fix out-of-tree build target-xtensa: avoid double-stopping at breakpoints target-xtensa: add fallthrough markers target-xtensa: add extui unit test Conflicts: configure Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-02qemu-ga: build it even if !systemMichael Tokarev
Move qemu-ga build check out of if softmmu.. into its own section. We want to build qemu-ga for _guest_ even if system build isn't done. It is controlled separately using --enable-guest-agent. Additionally, give error message if guest agent is requested but not supported. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-29tests: QAPI schema parser testsMarkus Armbruster
The parser handles erroneous input badly. To be improved shortly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1374939721-7876-2-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29tests/tcg/xtensa: Fix out-of-tree buildAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2013-07-26seccomp: no need to check arch in syscall whitelistEduardo Otubo
v2 update: - set libseccomp 2.1.0 as requirement on configure script. Since libseccomp 2.0 there's no need to check the architecture type anymore. Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1374518017-10424-2-git-send-email-otubo@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-26Merge remote-tracking branch 'rth/tcg-next' into stagingAnthony Liguori
# By Claudio Fontana (1) and others # Via Richard Henderson * rth/tcg-next: tcg: Remove temp_buf tcg/aarch64: Implement tlb lookup fast path tcg/aarch64: implement ldst 12bit scaled uimm offset Message-id: 1373919944-8521-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25Merge remote-tracking branch 'riku/linux-user-for-upstream' into stagingAnthony Liguori
* riku/linux-user-for-upstream: (21 commits) linux-user: Handle compressed ISA encodings when processing MIPS exceptions linux-user: Unlock mmap_lock when resuming guest from page_unprotect linux-user: Reset copied CPUs in cpu_copy() always linux-user: Fix epoll on ARM hosts linux-user: fix segmentation fault passing with h2g(x) != x linux-user: Fix pipe syscall return for SPARC linux-user: Fix target_stat and target_stat64 for OpenRISC linux-user: Avoid conditional cpu_reset() configure: Make NPTL non-optional linux-user: Enable NPTL for x86-64 linux-user: Add i386 TLS setter linux-user: Clean up handling of clone() argument order linux-user: Add missing 'break' in i386 get_thread_area syscall linux-user: Enable NPTL for m68k linux-user: Enable NPTL for SPARC targets linux-user: Enable NPTL for OpenRISC linux-user: Move includes of target-specific headers to end of qemu.h configure: Enable threading for unicore32-linux-user configure: Enable threading on all ppc and mips linux-user targets configure: Don't say target_nptl="no" if there is no linux-user target ... Conflicts: linux-user/main.c Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23rdma: core logicMichael R. Hines
Code that does need to be visible is kept well contained inside this file and this is the only new additional file to the entire patch. This file includes the entire protocol and interfaces required to perform RDMA migration. Also, the configure and Makefile modifications to link this file are included. Full documentation is in docs/rdma.txt Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-22configure: Make NPTL non-optionalPeter Maydell
Now all linux-user targets support building with NPTL, we can make it mandatory. This is a good idea because: * NPTL is no longer new and experimental; it is completely standard * in practice, linux-user without NPTL is nearly useless for binaries built against non-ancient glibc * it allows us to delete the rather untested code for handling the non-NPTL configuration Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the bsd-user codebase alone. This makes no change for bsd-user, since our configure test for NPTL had a "#include <linux/futex.h>" which means bsd-user would never have been compiled with CONFIG_USE_NPTL defined, and it still is not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for x86-64Peter Maydell
Add x86-64 implementation of cpu_set_tls() (like the kernel, we just have to call do_arch_prctl() to set FS); this allows us to enable NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Add i386 TLS setterAlexander Graf
We can easily set the TLS on i386. Add code to do so. Signed-off-by: Alexander Graf <agraf@suse.de> [PMM: also remove "target_nptl=no" line from configure, for consistency with other patches in this series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for m68kPeter Maydell
For m68k, per-thread data is a purely kernel construct with no CPU level support. Implement it via a field in the TaskState structure, used by cpu_set_tls() and the set_thread_area/get_thread_area syscalls. This allows us to enable compilation with NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 11:23:08 +0000