| Age | Commit message (Collapse) | Author |
|---|
|
configure uses "pkg-config" directly so that GLIB_VERSION is always based
on host glib version. To correctly handle cross-compilation it should use
"$pkg_config" and take GLIB_VERSION from the cross-compiled glib.
Reported-by: Валентин <val15032008@mail.ru>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1414
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit acedc9a660f83b362a1dec4b699e85d5dd82a067)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The docker probe uses "sudo -n" which can cause an e-mail with a security warning
each time when configure is run. Therefore run docker probe only if either docker
or podman are available.
That avoids the problematic "sudo -n" on build environments which have neither
docker nor podman installed.
Fixes: c4575b59155e2e00 ("configure: store container engine in config-host.mak")
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221030083510.310584-1-sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221117172532.538149-2-alex.bennee@linaro.org>
|
|
The configure script fails because it tries to compile small C programs
with a main function which is declared with arguments argc and argv
although those arguments are unused.
Running `configure -extra-cflags=-Wunused-parameter` triggers the problem.
configure for a native build does abort but shows the error in config.log.
A cross build configure for Windows with Debian stable aborts with an
error.
Avoiding unused arguments fixes this.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221102202258.456359-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221013131304.623740-1-pbonzini@redhat.com>
Message-Id: <20221027183637.2772968-27-alex.bennee@linaro.org>
|
|
The previous tweak was incomplete as it missed a leg.
Fixes: abafb64b6d (configure: explicitly set cflags for --disable-pie)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-6-alex.bennee@linaro.org>
|
|
This avoids the unfortunate effect of always builds the pc-bios blobs
for targets the user isn't interested in.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-5-alex.bennee@linaro.org>
|
|
When determining the endiandness of the target architecture we're
building for a small program is compiled, which in an obfuscated
way declares two strings. Then, we look which string is in
correct order (using strings binary) and deduct the endiandness.
But using the strings binary is problematic, because it's part of
toolchain (strings is just a symlink to
x86_64-pc-linux-gnu-strings or llvm-strings). And when
(cross-)compiling, it requires users to set the symlink to the
correct toolchain.
Fortunately, we have a better alternative anyways. We can mimic
what compiler.h is already doing: comparing __BYTE_ORDER__
against values for little/big endiandness.
Bug: https://bugs.gentoo.org/876933
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <d6d9c7043cfe6d976d96694f2b4ecf85cf3206f1.1665732504.git.mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This avoids the unfortunate effect of building pc-bios blobs
even for targets the user isn't interested in.
Due to the bi-arch nature of x86 and PPC firmware, check for the
desired target by hand, and don't just look for the compilation target
in $target_list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This reverts commit 730fe750fba63023e294ff0acf0f874369f1946f.
Unconditionally building all the bios for all arches was a little too
far too fast.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221011113417.794841-4-alex.bennee@linaro.org>
|
|
s390-ccw remains a bit more complex, because the -march=z900 test is done
only for the native cross compiler. Otherwise, all that is needed is
to pass the (now mandatory) target argument to write_target_makefile.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-29-alex.bennee@linaro.org>
|
|
Remove the symlink to tests/tcg/config-*.mak, which is possible now
that unused target config files are not created either.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-28-alex.bennee@linaro.org>
|
|
Let write_target_makefile handle both host and container cross compilers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-27-alex.bennee@linaro.org>
|
|
It will not be specific to tests/tcg anymore, since it will be possible to
build firmware using container-based cross compilers too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-26-alex.bennee@linaro.org>
|
|
Further decoupling of tests/tcg from the main QEMU Makefile, and making
the build more similar between the cross compiler case and the vetted
container images.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-25-alex.bennee@linaro.org>
|
|
Instead of linking tests/tcg/Makefile.target into the build tree, name
the symbolic link "Makefile" and create it in every target subdirectory.
This makes it possible to just invoke "make" in tests/tcg subdirectories.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-21-alex.bennee@linaro.org>
|
|
Remove the DOCKER_SCRIPT and TARGET variable from the Makefile invocation
for tests/tcg. For DOCKER_SCRIPT, resolve the path to docker.py in configure;
for TARGET, move it to config-$(TARGET).mak and use a symbolic link to break
the cycle.
The symbolic link is still needed because tests/tcg includes dummy config files
for targets that are not buildable. Once that is cleaned up, the symbolic link
will go away too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-20-alex.bennee@linaro.org>
|
|
In preparation for removing $(DOCKER_SCRIPT) from the tests/tcg configuration
files, have Make use the same container engine that had been probed at
configure time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-19-alex.bennee@linaro.org>
|
|
For now, return 1 for container-based compilers. This will change as
soon as ROMs will be buildable with them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-18-alex.bennee@linaro.org>
|
|
When tests/tcg gained it's own config-host.mak we forgot to move the
GDB detection.
Fixes: 544f4a2578 (tests/tcg: isolate from QEMU's config-host.mak)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-6-alex.bennee@linaro.org>
|
|
* x86: re-enable rng seeding via SetupData
* x86: reinitialize RNG seed on system reboot and after kernel load
* qboot: rebuild based on latest commit
* watchdog: remove -watchdog option
* update Meson to 0.61.5, move more configure tests
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmM4kiAUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNfbgf+IHhIHVxtBVWqayVRkwpQC+oAFV/V
# 4bvJI90rHmTNPA36n1ocUmQmXyNVTQFW/t7mlln5BhOwNzxnQycVe2idfMa6ntkb
# hHpe2NbICF9Crzb9BkK4wnaBLwEWA/X3WlnCqPYtxlxEhjmxu+HPtF7vm12OTkOV
# JevH3EN1gMiAfMo+gcRBlrwb5kntLm3nGZTCd218Ope22PoU6MVvxb9ivieJG8kD
# xDUGPQNU0mB9pypwLYZAqmu34xJ8Stly9UuJ1M2iQoawIs7W2Qy7svpOrsKZ3W/7
# D7J18QLAjI7Hq6rUWPgK5ugnUvVMdaTXM7MZSuIDIxRJuj5YryIsHRPybQ==
# =HEmX
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 01 Oct 2022 15:16:48 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
x86: re-initialize RNG seed when selecting kernel
target/i386/kvm: fix kvmclock_current_nsec: Assertion `time.tsc_timestamp <= migration_tsc' failed
configure, meson: move linker flag detection to meson
configure, meson: move C++ compiler detection to meson.build
meson: multiple names can be passed to dependency()
meson: require 0.61.3
meson: -display dbus and CFI are incompatible
ui: fix path to dbus-display1.h
watchdog: remove -watchdog option
configure: do not invoke as/ld directly for pc-bios/optionrom
qboot: rebuild based on latest commit
x86: re-enable rng seeding via SetupData
x86: reinitialize RNG seed on system reboot
x86: use typedef for SetupData struct
x86: return modified setup_data only if read as memory, not as file
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The test is slightly weaker than before, because it does not
call an extern "C" function from a C source file. However,
in practice what we seek to detect is ABI compatibility of the
various sanitizer flags, and for that it is enough to compile
anything with CC and link it with CXX.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This removes the dependency of dbus-display on --enable-modules. It also allows
cleanups in modinfo collection and allows moving C++ compiler detection to
meson.build.
Because it is now deprecated to use install_subdir to create an empty directory,
replace it with install_emptydir.
Updating the Meson submodule to 0.61.5 also removes the message
WARNING: Broken python installation detected. Python files installed
by Meson might not be found by python interpreter.
unless using system meson is forced with --meson.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/873
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/848
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
staging
* Fix emulation of the LZRF instruction
* Fix "noexec" TCG test on s390x
* Implement SHA-512 and random number generator instructions
* Support for zPCI interpretation on s390x hosts
* Removal of the "slirp" submodule
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmMx26URHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUaOw/7Bu1ghYJyzjR8raXSzOP8KmyltKb0s0zd
# rFpagZCeBiNGHAL2IaKHc3vw+oFy/TTWhrFLt+imDo2swDIIAWCb/bY2/snKX4c8
# feF0io7JTdNCWvS/9ng6qL/fGSNM6V2osYyN5fEm46DM7gC3GlAu5vP2TCVoIifw
# AXDANd6XngoCAFBdixGNi0yxAmiLCou/1S+lJ7hCbx1oICPPTrzuGBwyQ+IELJOD
# DUGFb+Dl4z+tv8OYRhdvoSTCz75IhsAXeny2+coffvW70BDSyhzIAtVeo2azVGvT
# aOVRJt+g7H/mJ0vH20M/7pakdwvHs3zciw5oHUJSsEW1HzsqNgl+AEEUzXivipaN
# LYp5//klqjjAu12hFQbzmbhD/vUw2+8mRgbJdKOz7rSrZ/K8f+jqIbbU5r8t1oyy
# BqLo2i0EVBfAomzbHMD/kmrumiSNIlfSDwScAoIKAO6P3oy/Sg2twMhPlFRWAnI0
# 46dQS1rLuU0nV4tMCAQoXxRxjQXytCOhaF9G+qe9ogLufHG+Uy+j3IeunyAUl9GR
# EcnRB0GFjWfZKeUsR9qev2pvgOZXeg4u+wpjGM7pmfpZw89nBqCj0UVAthXlSKoz
# ru3HcuBJTBtxwYkSCsPMEDCk/FhJN0D+N205qg+6SY28R57WjTPFLvZPRmhkH03E
# jN8rurLISAM=
# =FeSy
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Sep 2022 13:04:37 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-09-26' of https://gitlab.com/thuth/qemu:
Remove the slirp submodule (i.e. compile only with an external libslirp)
s390x/s390-virtio-ccw: add zpcii-disable machine property
s390x/pci: reflect proper maxstbl for groups of interpreted devices
s390x/pci: let intercept devices have separate PCI groups
s390x/pci: enable adapter event notification for interpreted devices
s390x/pci: don't fence interpreted devices without MSI-X
s390x/pci: enable for load/store interpretation
s390x/pci: add routine to get host function handle from CLP info
Update linux headers to v6.0-rc4
configure: Add -Wno-gnu-variable-sized-type-not-at-end
target/s390x: support PRNO_TRNG instruction
target/s390x: support SHA-512 extensions
linux-user/host/s390: Add vector instructions to host_signal_write()
s390x/tcg: Fix opcode for lzrf
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Just use using the compiler binary, with -nostdlib in the case of the
linker; the compiler driver (whether i686-*-gcc, or x86_64-*-gcc with
the -m32 option) will then pick the right magic option to as and ld.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since QEMU 7.1 we don't support Ubuntu 18.04 anymore, so the last big
important Linux distro that did not have a pre-packaged libslirp has
been dismissed. All other major distros seem to have a libslirp package
in their distribution already - according to repology.org:
Fedora 35: 4.6.1
CentOS 8 (RHEL-8): 4.4.0
Debian 11: 4.4.0
OpenSUSE Leap 15.3: 4.3.1
Ubuntu LTS 20.04: 4.1.0
FreeBSD Ports: 4.7.0
NetBSD pkgsrc: 4.7.0
Homebrew: 4.7.0
MSYS2 mingw: 4.7.0
The only one that was still missing a libslirp package is OpenBSD - but
the next version (OpenBSD 7.2 which will be shipped in October) is going
to include a libslirp package. Since QEMU 7.2 will be published after
OpenBSD 7.2, we should be fine there, too.
So there is no real urgent need for keeping the slirp submodule in
the QEMU tree anymore. Thus let's drop the slirp submodule now and
rely on the libslirp packages from the distributions instead.
Message-Id: <20220824151122.704946-7-thuth@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
A Linux headers update to v6.0-rc switches some definitions from GNU
'zero-length-array' extension to the C-standard-defined flexible array
member. e.g.
struct kvm_msrs {
__u32 nmsrs; /* number of msrs in entries */
__u32 pad;
- struct kvm_msr_entry entries[0];
+ struct kvm_msr_entry entries[];
};
Those (unlike the GNU zero-length-array) have some extra restrictions like
'this must be put at the end of a struct', which clang build would complain
about. e.g. the current code
struct {
struct kvm_msrs info;
struct kvm_msr_entry entries[1];
} msr_data = { }
generates the warning like:
target/i386/kvm/kvm.c:2868:25: error: field 'info' with variable sized
type 'struct kvm_msrs' not at the end of a struct or class is a GNU
extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs info;
^
In fact, the variable length 'entries[]' field in 'info' is zero-sized in
GNU defined semantics, which can give predictable offset for 'entries[1]'
in local msr_data. The local defined struct is just there to force a stack
allocation large enough for 1 kvm_msr_entry, a clever trick but requires to
turn off this clang warning.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220915091035.3897-2-chenyi.qiang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
We use the non-POSIX 'local' keyword in just two places in configure;
rewrite to avoid it.
In do_compiler(), just drop the 'local' keyword. The variable
'compiler' is only used elsewhere in the do_compiler_werror()
function, which already uses the variable as a normal non-local one.
In probe_target_compiler(), $try and $t are both local; make them
normal variables and use a more obviously distinct variable name
for $t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-8-peter.maydell@linaro.org
|
|
Shellcheck warns that we have one place where we run a command and
then check if it failed using $?; this is better written to simply
check the command in the 'if' statement directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-7-peter.maydell@linaro.org
|
|
There's only one place in configure where we use `...` to execute a
command and capture the result. Switch to $() to match the rest of
the script. This silences a shellcheck warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-6-peter.maydell@linaro.org
|
|
Shellcheck warns that in
rm -f */config-devices.mak.d
the glob might expand to something with a '-' in it, which would
then be misinterpreted as an option to rm. Fix this by adding './'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-5-peter.maydell@linaro.org
|
|
This commit adds quotes in some places which:
* are spotted by shellcheck
* are obviously incorrect
* are easy to fix just by adding the quotes
It doesn't attempt fix all of the places shellcheck finds errors,
or even all the ones which are easy to fix. It's just a random
sampling which is hopefully easy to review and which cuts
down the size of the problem for next time somebody wants to
try to look at shellcheck errors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-4-peter.maydell@linaro.org
|
|
The meson_args variable was added in commit 3b4da13293482134b, but
was not used in that commit and isn't used today. Delete the
unnecessary assignment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-3-peter.maydell@linaro.org
|
|
Shellcheck correctly reports that we set python_version and never use
it. This is a leftover from commit f9332757898a7: we used to use
python_version purely to as part of the summary information printed
at the end of a configure run, and that commit changed to printing
the information from meson (which looks up the python version
itself). Remove the unused variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220825150703.4074125-2-peter.maydell@linaro.org
|
|
This is working around current limitation of Meson's handling of
--disable-pie.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220914155950.804707-19-alex.bennee@linaro.org>
|
|
Instead of using feature_not_found(), which is not a good match because
there is no "remedy" to fix the lack of makecontext(), just print a
custom error.
This happens to remove the last use of feature_not_found(), so remove
the definition and the documentation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
probe_target_compiler returns nonempty $target_cc for installed toolchains
and $container_cross_cc for container-based toolchains. In both cases
however the flags (coming from $cross_cc_cflags_${target_arch}) must be
in $target_cflags.
Therefore, do not clear them prior to returning from probe_target_compiler.
Reported-by: Taylor Simpson <tsimpson@quicinc.com>
Fixes: 92e288fcfb ("build: try both native and cross compilers", 2022-07-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When moving this code out of probe_target_compiler(), we failed to adjust
the variable in which the target is located, resulting in e.g.
powerpc64-linux-user-linux-gnu-gcc-10
Fixes: cd362defbbd ("tests/tcg: merge configure.sh back into main configure script")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220728183901.1290113-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The '==' operator to test is a bashism; the standard way to copmare
strings is '='. This causes dash to complain:
../../configure: 681: test: linux: unexpected operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-6-peter.maydell@linaro.org
|
|
In commit 823eb013452e93d we moved the setting of ARCH from configure
to meson.build, but we accidentally left behind one attempt to use
$ARCH in configure, which was trying to add -msmall-data to the
compiler flags on Alpha hosts. Since ARCH is now never set, the test
always fails and we never add the flag.
There isn't actually any need to use this compiler flag on Alpha:
the original intent was that it would allow us to simplify our TCG
codegen on that platform, but we never actually made the TCG changes
that would rely on -msmall-data.
Drop the effectively-dead code from configure, as we don't need it.
This was spotted by shellcheck:
In ./configure line 2254:
case "$ARCH" in
^---^ SC2153: Possible misspelling: ARCH may not be assigned, but arch is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-5-peter.maydell@linaro.org
|
|
The variable string-replacement syntax ${var/old/new} is a bashism
(though it is also supported by some other shells), and for instance
does not work with the NetBSD /bin/sh, which complains:
../src/configure: 687: Syntax error: Bad substitution
Replace it with a more portable sed-based approach, similar to
what we already do in quote_sh().
Note that shellcheck also diagnoses this:
In ./configure line 687:
e=${e/'\'/'\\'}
^-----------^ SC2039: In POSIX sh, string replacement is undefined.
^-- SC1003: Want to escape a single quote? echo 'This is how it'\''s done'.
^-- SC1003: Want to escape a single quote? echo 'This is how it'\''s done'.
In ./configure line 688:
e=${e/\"/'\"'}
^----------^ SC2039: In POSIX sh, string replacement is undefined.
Fixes: 8154f5e64b0cf ("meson: Prefix each element of firmware path")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-4-peter.maydell@linaro.org
|
|
In shell script syntax, $var[something] is not special for variable
expansion: $var is expanded. However, as it can look as if it were
intended to be an array element access (the correct syntax for which
is ${var[something]}), shellcheck recommends using explicit braces
around ${var} to clarify the intended expansion.
This fixes the warning:
In ./configure line 2346:
if "$target_ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
^-- SC1087: Use braces when expanding arrays, e.g. ${array[idx]} (or ${var}[.. to quiet).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220720152631.450903-3-peter.maydell@linaro.org
|
|
In commit 7d7dbf9dc15be6e1 we added a line to the configure script
which is not valid POSIX shell syntax, because it is missing a space
after a '!' character. shellcheck diagnoses this:
if !(GIT="$git" "$source_path/scripts/git-submodule.sh" "$git_submodules_action" "$git_submodules"); then
^-- SC1035: You are missing a required space after the !.
and the OpenBSD shell will not correctly handle this without the space.
Fixes: 7d7dbf9dc15be6e1 ("configure: replace --enable/disable-git-update with --with-git-submodules")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20220720152631.450903-2-peter.maydell@linaro.org
|
|
Use the pre-packaged toolchain provided by Loongson via github.
Tested-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220704070824.965429-1-richard.henderson@linaro.org>
|
|
* SCSI fuzzing fix (Mauro)
* pre-install data files in the build directory (Akihiko)
* SCSI fixes for Mac OS (Mark)
# gpg: Signature made Wed 13 Jul 2022 15:59:00 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
pc-bios/s390-ccw: add -Wno-array-bounds
q800: add default vendor and product information for scsi-cd devices
q800: add default vendor and product information for scsi-hd devices
scsi-disk: allow MODE SELECT block descriptor to set the block size
scsi-disk: allow the MODE_PAGE_R_W_ERROR AWRE bit to be changeable for CDROM drives
q800: implement compat_props to enable quirk_mode_page_truncated for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk for Macintosh
scsi-disk: add FORMAT UNIT command
q800: implement compat_props to enable quirk_mode_page_vendor_specific_apple for scsi devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk for Macintosh
q800: implement compat_props to enable quirk_mode_sense_rom_use_dbd for scsi-cd devices
scsi-disk: add SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk for Macintosh
q800: implement compat_props to enable quirk_mode_page_apple_vendor for scsi-cd devices
scsi-disk: add MODE_PAGE_APPLE_VENDOR quirk for Macintosh
scsi-disk: add new quirks bitmap to SCSIDiskState
meson: Prefix each element of firmware path
module: Use bundle mechanism
datadir: Use bundle mechanism
cutils: Introduce bundle mechanism
scsi/lsi53c895a: really fix use-after-free in lsi_do_msgout (CVE-2022-0216)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624154042.51512-1-akihiko.odaki@gmail.com>
[Rewrite shell function without using Bash extensions. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If we don't need to emulate any target, we certainly don't need TCG.
This should also help to compile again with
".../configure --enable-tools --disable-system --disable-user"
on systems that do not have a TCG backend.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[thuth: Re-arranged the code, remove check-softfloat from buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220706153816.768143-1-thuth@redhat.com>
|
|
Configure is trying to fall back on cross compilers for targets that
can have bi-arch or bi-endian toolchains, but there are many corner
cases where just checking the name can go wrong. For example, the RHEL
ppc64le compiler is bi-arch and bi-endian, but multilibs are disabled.
Therefore it cannot be used to build 32-bit hosted binaries like the
linux-user TCG tests.
Trying the cross compiler first also does not work, and an example for
this is also ppc64le. The powerpc64-linux-gnu-gcc binary from the
cross-gcc package is theoretically multilib-friendly, but it cannot
find the CRT files on a ppc64le host, because they are not in the .../le
multilib subdirectory.
This can be fixed by testing both the native compiler and the cross
compiler, and proceeding with the first one that works. To do this,
move the compiler usability check from the tests/tcg snippet to inside
probe_target_compiler and, while at it, restrict the softmmu emulation
target to basically a test for the presence of libgcc.
Tested-by: Matheus Kowalczuk Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Let probe_target_compiler know if it is looking for a compiler for a
softmmu (freestanding) or a linux-user (hosted) environment. The
detection for the compiler has to be done differently in the two
cases.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
