aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)Author
2017-07-24util: Introduce include/qemu/cpuid.hRichard Henderson
Clang 3.9 passes the CONFIG_AVX2_OPT configure test. However, the supplied <cpuid.h> does not contain the bit_AVX2 define that we use when detecting whether the routine can be enabled. Introduce a qemu-specific header that uses the compiler's definition of __cpuid et al, but supplies any missing bit_* definitions needed. This avoids introducing any extra ifdefs to util/bufferiszero.c, and allows quite a few to be removed from tcg/i386/tcg-target.inc.c. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20170719044018.18063-1-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-21configure: Drop ancient Solaris 9 and earlier supportPeter Maydell
Solaris 9 was released in 2002, its successor Solaris 10 was released in 2005, and Solaris 9 was end-of-lifed in 2014. Nobody has stepped forward to express interest in supporting Solaris of any flavour, so removing support for the ancient versions seems uncontroversial. In particular, this allows us to remove a use of 'uname' in configure that won't work if you're cross-compiling. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1499955697-28045-1-git-send-email-peter.maydell@linaro.org
2017-07-21configure: Never use 'uname' to identify target OSPeter Maydell
For a very long time we have used 'uname -s' as our fallback if we don't identify the target OS using a compiler #define. This obviously doesn't work for cross-compilation, and we've had a comment suggesting we fix this in configure for a long time. Since we now have an exhaustive list of which OSes we can run on (thanks to commit 898be3e0415 making an unrecognized OS be a fatal error), we know which ones we're missing. Add check_define tests for the remaining OSes we support. The defines checked are based on ones we already use in the codebase for identifying the host OS (with the exception of GNU/kFreeBSD). We can now set bogus_os immediately rather than doing it later. We leave the comment about uname being bad untouched, since there is still a use of it for the fallback for unrecognized host CPU type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1499958932-23839-1-git-send-email-peter.maydell@linaro.org
2017-07-20configure: Don't build ivshmem tools unless CONFIG_IVSHMEM is setKamil Rytarowski
Don't try to build the ivshmem-server and ivshmem-client tools unless CONFIG_IVSHMEM is set. This fixes in passing a build bug on NetBSD, which fails to build the ivshmem tools because they use shm_open() and on NetBSD that requires linking against -lrt. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org [PMM: moved some code into earlier patches; minor bugfixes; added commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-20configure: Use an explicit CONFIG_IVSHMEM rather than CONFIG_EVENTFDKamil Rytarowski
Rather than relying on everywhere that cares about whether the host supports ivshmem using CONFIG_EVENTFD, make configure set an explicit CONFIG_IVSHMEM. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org [PMM: split out from another patch, add commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-19Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange/tags/pull-qcrypto-2017-07-18-2' into staging Merge qcrypto 2017/07/18 v2 # gpg: Signature made Wed 19 Jul 2017 10:11:21 BST # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qcrypto-2017-07-18-2: tests: crypto: add hmac speed benchmark support tests: crypto: add hash speed benchmark support tests: crypto: add cipher speed benchmark support crypto: hmac: add af_alg-backend hmac support crypto: hash: add afalg-backend hash support crypto: cipher: add afalg-backend cipher support crypto: introduce some common functions for af_alg backend crypto: hmac: add hmac driver framework crypto: hmac: introduce qcrypto_hmac_ctx_new for glib-backend crypto: hmac: introduce qcrypto_hmac_ctx_new for nettle-backend crypto: hmac: introduce qcrypto_hmac_ctx_new for gcrypt-backend crypto: hmac: move crypto/hmac.h into include/crypto/ crypto: hash: add hash driver framework crypto: cipher: add cipher driver framework crypto: cipher: introduce qcrypto_cipher_ctx_new for builtin-backend crypto: cipher: introduce qcrypto_cipher_ctx_new for nettle-backend crypto: cipher: introduce qcrypto_cipher_ctx_new for gcrypt-backend crypto: cipher: introduce context free function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-19crypto: introduce some common functions for af_alg backendLongpeng(Mike)
The AF_ALG socket family is the userspace interface for linux crypto API, this patch adds af_alg family support and some common functions for af_alg backend. It'll be used by afalg-backend crypto latter. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Maintainer: modified to report an error if AF_ALG is requested but cannot be supported Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-18xen/mapcache: introduce xen_replace_cache_entry()Igor Druzhinin
This new call is trying to update a requested map cache entry according to the changes in the physmap. The call is searching for the entry, unmaps it and maps again at the same place using a new guest address. If the mapping is dummy this call will make it real. This function makes use of a new xenforeignmemory_map2() call with an extended interface that was recently introduced in libxenforeignmemory [1]. [1] https://www.mail-archive.com/xen-devel@lists.xen.org/msg113007.html Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-07-17qemu-ga: check if utmpx.h is available on the systemTomáš Golembiovský
Commit 161a56a9065 added command guest-get-users and requires the utmpx.h (defined by POSIX) to work. It is however not always available (e.g. on OpenBSD) therefor a check for its existence is necessary. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-14Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into ↵Peter Maydell
staging s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups - add a network boot rom for s390 (Thomas Huth) - migration of storage attributes like the CMMA used/unused state - PCI related enhancements - full support for aen, ais and zpci - migration support for css with vmstates (Halil Pasic) - cpu model enhancements for cpu features - guarded storage support # gpg: Signature made Fri 14 Jul 2017 11:33:04 BST # gpg: using RSA key 0x117BBC80B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" # Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C * remotes/borntraeger/tags/s390x-20170714: (40 commits) s390x/gdb: add gs registers s390x/arch_dump: also dump guarded storage control block s390x/kvm: enable guarded storage s390x/kvm: Enable KSS facility for nested virtualization s390x/cpumodel: add esop/esop2 to z12 model s390x/cpumodel: we are always in zarchitecture mode s390x/cpumodel: wire up new hardware features s390x/flic: migrate ais states s390x/cpumodel: add zpci, aen and ais facilities s390x: initialize cpu firstly pc-bios/s390: rebuild s390-ccw.img pc-bios/s390: add s390-netboot.img pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load pc-bios/s390-ccw: Add virtio-net driver code pc-bios/s390-ccw: Add core files for the network bootloading program roms/SLOF: Update submodule to latest status pc-bios/s390-ccw: Add code for virtio feature negotiation pc-bios/s390-ccw: Remove unused structs from virtio.h pc-bios/s390-ccw: Move byteswap functions to a separate header pc-bios/s390-ccw: Add a write() function for stdio ... Conflicts: target/s390x/kvm.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14s390x/gdb: add gs registersChristian Borntraeger
Let's provide the guarded storage registers via gdb server. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14build: add -Wexpansion-to-definedPaolo Bonzini
This warning is included in -Wall by clang, but not by GCC (which only enables it for -Wextra). Include it in the list of warnings we enable to minimize the differences between the compilers: Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-13Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell
staging trivial patches for 2017-07-12 # gpg: Signature made Wed 12 Jul 2017 14:58:43 BST # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: include/hw/ptimer.h: Add documentation comments hxtool: remove dead -q option qga-win32: Fix memory leak of device information set hw/core: fix missing return value in load_image_targphys_as() elf-loader: warn about invalid endianness configure: Handle having no c++ compiler in FORTIFY_SOURCE check hw/pci: define msi_nonbroken in pci-stub hw/misc: add missing includes configure: Fix build with pkg-config and --static --enable-sdl util/qemu-sockets: Drop unused helper socket_address_to_string() target/xtensa: gdbstub: drop dead return statement Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-11build: disable Xen on ARMPaolo Bonzini
While ARM could present the xenpv machine, it does not and trying to enable it breaks compilation. Revert to the previous test which only looked at $target_name, not $cpu. Fixes: 3b6b75506de44c5070639943c30a0ad5850f5d02 Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20170711100049.20513-1-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-11configure: Handle having no c++ compiler in FORTIFY_SOURCE checkPeter Maydell
Our FORTIFY_SOURCE check assumes that $cxx refers to a working C++ compiler, with the result that if you don't happen to have one then configure will spuriously print configure: line 4685: c++: command not found Fix this by adding a 'has $cxx' check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-11configure: Fix build with pkg-config and --static --enable-sdlThomas Huth
The configure script prefers pkg-config over sdl-config, but the "--static-libs" parameter only exists for the latter. With pkg-config, "--static --libs" have to be used instead. Buglink: https://bugs.launchpad.net/qemu/+bug/984516 Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-04configure: add --disable-tcg configure optionPaolo Bonzini
This lets you build without TCG (hardware accelerationor qtest only). When this flag is passed to configure, it will automatically filter out the target list to only those that support KVM or Xen or HAX. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04configure: early test for supported targetsPaolo Bonzini
Check for unsupported targets in target_list, and print an error early in the configuration process. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04configure: factor out list of supported Xen/KVM/HAX targetsPaolo Bonzini
This will be useful when the functions are called, early in the configure process, to filter out targets that do not support hardware acceleration. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-26configure: Define NCURSES_WIDECHAR if we're using cursesPeter Maydell
We want the wide character functions from the ncurses header. Unfortunately it doesn't provide them by default, but only if either: * NCURSES_WIDECHAR is defined (for ncurses 20111030 and up) * _XOPEN_SOURCE/_XOPEN_SOURCE_EXTENDED are suitably defined So far we have been implicitly relying on the latter, because for GNU libc when we define _GNU_SOURCE this causes libc to define the _XOPEN_SOURCE macros for us. Unfortunately this doesn't work on all libcs, because some (like OSX and musl libc) do not define _XOPEN_SOURCE when _GNU_SOURCE is defined. We can't fix this by defining _XOPEN_SOURCE ourselves, because that also means "and don't provide any functions that aren't in that standard", and not all libcs provide any way to override that to also get the non-standard functions. In particular FreeBSD has no such mechanism, and OSX's _DARWIN_C_SOURCE doesn't reenable everything (for instance getpagesize() is still not prototyped if _DARWIN_C_SOURCE and _XOPEN_SOURCE are both defined). So we have to define NCURSES_WIDECHAR. (This will only work if your ncurses is at least 20111030, as older versions don't honour this macro.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1496414138-7622-1-git-send-email-peter.maydell@linaro.org
2017-06-21target-m68k: define 96bit FP registers for gdb on 680x0Laurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <20170620205121.26515-5-laurent@vivier.eu>
2017-06-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* nbd and qemu-nbd fixes (Eric, Max) * nbd refactoring (Vladimir) * vhost-user-scsi, take N+1 (Felipe) * replace memory_region_set_fd with memory_region_init_ram_from_fd (Marc-André) * docs/ movement (Paolo) * megasas TOCTOU fixes (Paolo) * make async_safe_run_on_cpu work on kvm/hax accelerators (Paolo) * Build system and poison.h improvements (Thomas) * -accel thread=xxx fix (Thomas) * move files to accel/ (Yang Zhong) # gpg: Signature made Thu 15 Jun 2017 10:51:55 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (41 commits) vhost-user-scsi: Introduce a vhost-user-scsi sample application vhost-user-scsi: Introduce vhost-user-scsi host device qemu-doc: include version number docs: create interop/ subdirectory include/exec/poison: Mark some CONFIG defines as poisoned, too include/exec/poison: Add missing TARGET defines nbd/server: refactor nbd_trip nbd/server: rename rc to ret nbd/server: get rid of fail: return rc nbd/server: nbd_negotiate: fix error path nbd/server: remove NBDClientNewData nbd/server: refactor nbd_co_receive_request nbd/server: get rid of EAGAIN dead code nbd/server: refactor nbd_co_send_reply nbd/server: get rid of ssize_t nbd/server: get rid of nbd_negotiate_read and friends nbd: make nbd_drop public nbd: rename read_sync and friends accel: move kvm related accelerator files into accel/ tcg: move tcg backend files into accel/tcg/ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-15docs: create interop/ subdirectoryPaolo Bonzini
This is for the future interoperability & management guide. It includes the QAPI docs, including the automatically generated ones, other socket protocols (vhost-user, VNC), and the qcow2 file format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15tcg: move tcg backend files into accel/tcg/Yang Zhong
move tcg-runtime.c, translate-all.(ch) and translate-common.c into accel/tcg/ subdirectory and updated related trace-events file. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <1496383606-18060-4-git-send-email-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-14sdl: prefer sdl2 over sdl1Gerd Hoffmann
In case the configure script finds both SDL 1.2 and SDL 2.x installed it still prefers SDL 1.2. Prefer SDL 2.x instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20170606105339.3613-3-kraxel@redhat.com
2017-06-14gtk: prefer gtk3 over gtk2Gerd Hoffmann
In case the configure script finds both gtk2 and gtk3 installed it still prefers gtk2 over gtk3. Prefer gtk3 instead. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20170606105339.3613-2-kraxel@redhat.com
2017-06-12Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed 07 Jun 2017 19:06:51 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: configure: split c and cxx extra flags coroutine-lock: do not touch coroutine after another one has been entered .gdbinit: load QEMU sub-commands when gdb starts coccinelle: fix typo in comment oslib: strip trailing '\n' from error_setg() string argument Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-07target/i386: Add GDB XML description for SSE registersAbdallah Bouassida
Add an XML description for SSE registers (XMM+MXCSR) for both X86 and X86-64 architectures in the GDB stub: - configure: Define gdb_xml_files for the X86 targets (32 and 64bit). - gdb-xml/i386-32bit-sse.xml & gdb-xml/i386-64bit-sse.xml: The XML files that contain a description of the XMM + MXCSR registers. - gdb-xml/i386-32bit.xml & gdb-xml/i386-64bit.xml: wrappers that include the XML file of the core registers and the other XML file of the SSE registers. - target/i386/cpu.c: Modify the gdb_core_xml_file to the new XML wrapper, modify the gdb_num_core_regs to fit the registers number defined in each XML file. Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07configure: split c and cxx extra flagsBruno Dominguez
There was no possibility to add specific cxx flags using the configure file. So A new entrance has been created to support it. Duplication of information in configure and rules.mak. Taking QEMU_CFLAGS and add them to QEMU_CXXFLAGS, now the value of QEMU_CXXFLAGS is stored in config-host.mak, so there is no need for it. The makefile for libvixl was adding flags for QEMU_CXXFLAGS in QEMU_CFLAGS because of the addition in rules.mak. That was removed, so adding them where it should be. Signed-off-by: Bruno Dominguez <bru.dominguez@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1496754467-20893-1-git-send-email-bru.dominguez@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-07.gdbinit: load QEMU sub-commands when gdb startsStefan Hajnoczi
The scripts/qemu-gdb.py file is not easily discoverable. Add a .gdbinit file so GDB either loads qemu-gdb.py automatically or prints a message informing the user how to enable them (some systems disable ./.gdbinit loading for security reasons). Symlink .gdbinit and the scripts directory in order to make out-of-tree builds work. The scripts directory is used to find the qemu-gdb.py file specified by a relative path in .gdbinit. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Eric Blake <eblake@redhat.com> Message-id: 20170517124042.1430-1-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-05tcg/sparc: Use the proper compilation flags for 32-bitRichard Henderson
We have required a v9 cpu since 9b9c37c36439ee0452632253dac7a31897f27f70. However, the flags we were using did not reliably enable v8plus, which meant that the compiler didn't know it could inline 64-bit atomics. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-04configure: Detect native NetBSD curses(3)Kamil Rytarowski
NetBSD ships with traditional BSD curses with compatibility with ncurses. qemu works nicely with the basesystem version of curses(3) from NetBSD. The only mismatch between curses(3) and ncurses is the lack of curses_version() in the NetBSD version. This function is used solely in the configure script, therefore eliminate it from the curses(3) detection. With this change applied, configure detects correctly curses frontend. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-06-02gluster: add support for PREALLOC_MODE_FALLOCNiels de Vos
Add missing support for "preallocation=falloc" to the Gluster block driver. This change bases its logic on that of block/file-posix.c and removed the gluster_supports_zerofill() and qemu_gluster_zerofill() functions in favour of #ifdef checks in an easy to read switch-statement. Both glfs_zerofill() and glfs_fallocate() have been introduced with GlusterFS 3.5.0 (pkg-config glusterfs-api = 6). A #define for the availability of glfs_fallocate() has been added to ./configure. Reported-by: Satheesaran Sundaramoorthi <sasundar@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Message-id: 20170528063114.28691-1-ndevos@redhat.com URL: https://bugzilla.redhat.com/1450759 Signed-off-by: Niels de Vos <ndevos@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-05-25util: drop old utimensat() compat codeGreg Kurz
Now that 9pfs and virtfs-proxy-helper have been converted to utimensat(), we don't need to keep qemu_utimens() anymore. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-05-18block migration: Allow compile time disableDr. David Alan Gilbert
Many users now prefer to use drive_mirror over NBD as an alternative to the older migrate -b option; drive_mirror is more complex to setup but gives you more options (e.g. only migrating some of the disks if some of them are shared). Allow the large chunk of block migration code to be compiled out for those who don't use it. Based on a downstream-patch we've had for a while by Jeff Cody. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> -- - When compiled out, allow seting block only with false value (eric)
2017-05-16configure: Remove -lxencall for Xen detectionAnthony PERARD
QEMU does not depends on libxencall, it was added because it was a missing link dependency of libxendevicemodel, but now the later should be built properly. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-05-16maintainers: Add myself as a NetBSD reviewerKamil Rytarowski
I volunteer to review NetBSD patches. Adding myself will help to not miss some of them. Restore NetBSD as a maintained host. All patches to make qemu/pkgsrc building have been emitted to review. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Message-id: 20170513022143.2838-1-n54@gmx.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-15Merge remote-tracking branch 'dgibson/tags/ppc-for-2.10-20170511' into stagingStefan Hajnoczi
ppc patch queue for 2017-05-11 This pull request supersedes the one from yesterday (20170510), fixing an important style bug in one patch, and adding an extra couple of simple patches. Highlights of this set: * Some fixes for POWER9 * TCG support for POWER9 radix MMU * VGA rom for Mac machine types * Fixes for the XICS interrupt controller * MTTCG support for ppc targets As suggested by Paolo, I've tried to add the Docker tests to my standard pre-pull-request tests. I haven't wholly suceeded; this has been tested with some of the Docker images, but others I haven't managed due to problems that as best I can tell are not due to problems in this patch series. I'll continue working on this for future pull requests. Specifically, 'travis', 'fedora', and 'centos6' seem to work. 'min-glib' jammed while gtesting moxie, which seems very unlikely to be caused by this series. 'ubuntu', 'debian' and 'debian-bootstrap' hit build errors almost immediately that look like problems with the container configuration, and 'debian-*-cross' hit build errors later on which also look like missing dependencies from the container. # gpg: Signature made Thu 11 May 2017 05:13:46 AM BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * dgibson/tags/ppc-for-2.10-20170511: (23 commits) target/ppc: Avoid printing wrong aliases in CPU help text pnv: Fix build failures on some host platforms target/ppc: Allow workarounds for POWER9 DD1 spapr: Don't accidentally advertise HTM support on POWER9 ppc: xics: fix compilation with CentOS 6 target/ppc: Enable RADIX mmu mode for pseries TCG guest target/ppc: Implement ISA V3.00 radix page fault handler target/ppc: Change tlbie invalid fields for POWER9 support target/ppc: Update tlbie to check privilege level based on GTSE target/ppc: Set UPRT and GTSE on all cpus in H_REGISTER_PROCESS_TABLE ppc: add qemu_vga.ndrv ROM to fw_cfg interface for NewWorld Macs ppc: add qemu_vga.ndrv ROM to fw_cfg interface for OldWorld Macs Add QemuMacDrivers qemu_vga.ndrv revision d4e7d7a built as submodule Add QemuMacDrivers as submodule ppc/xics: preserve P and Q bits for KVM IRQs ppc/xics: Fix stale irq->status bits after get target/ppc: do not reset reserve_addr in exec_enter tcg: enable MTTCG by default for PPC64 on x86 cpus: Fix CPU unplug for MTTCG target/ppc: Generate fence operations ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-12coroutine: remove GThread implementationDaniel P. Berrange
The GThread implementation is not functional enough to actually run QEMU reliably. While it was potentially useful for debugging, we have a scripts/qemugdb/coroutine.py to enable tracing of ucontext coroutines in GDB, so that removes the only reason for GThread to exist. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-11tcg: enable MTTCG by default for PPC64 on x86Nikunj A Dadhania
This enables the multi-threaded system emulation by default for PPC64 guests using the x86_64 TCG back-end. Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-05use _Static_assert in QEMU_BUILD_BUG_ONAndreas Grapentin
QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it, to provide more readable messages on failure. We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT is defined, and reverts to the old way otherwise. That way, systems without C11 conforming compiler will still have the old messages, as verified by intentionally breaking the configure check. the following example output was generated by inverting the condition in QEMU_BUILD_BUG_ON: without _Static_assert: > In file included from /qemu/include/qemu/osdep.h:36:0, > from /qemu/qga/commands.c:13: > /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’: > /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’ > struct { \ > ^ > /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro QEMU_BUILD_BUG_ON_STRUCT’ > #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \ > ^~~~~~~~~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ > QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \ > ^~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’ > atomic_load_acquire(ptr) > ^~~~~~~~~~~~~~~~~~~ > /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’ > bool finished = atomic_mb_read(&gei->finished); > ^~~~~~~~~~~~~~ with _Static_assert: > In file included from /qemu/include/qemu/osdep.h:36:0, > from /qemu/qga/commands.c:13: > /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’: > /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)" > #define QEMU_BUILD_BUG_ON(x) _Static_assert((x), #x) > ^ > /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ > QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \ > ^~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’ > atomic_load_acquire(ptr) > ^~~~~~~~~~~~~~~~~~~ > /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’ > bool finished = atomic_mb_read(&gei->finished); > ^~~~~~~~~~~~~~ Signed-off-by: Andreas Grapentin <andreas@grapentin.org> Message-Id: <20170314165953.18506-1-andreas@grapentin.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05target/i386: Add GDB XML register description supportAbdallah Bouassida
This patch implements XML target description support for X86 and X86-64 architectures in the GDB stub, as the way with ARM and PowerPC: - gdb-xml/32bit-core.xml & gdb-xml/64bit-core.xml: Adding the XML target description files, these files are picked from GDB source code. - configure: Define gdb_xml_files for X86 targets. - target/i386/cpu.c: Define gdb_core_xml_file and gdb_arch_name to add XML awareness for this architecture, modify the gdb_num_core_regs to fit the registers number defined in each XML file. Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com> Message-Id: <2b3c8119-1602-28c7-eab4-296593877103@lauterbach.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-04-28configure: fix trace backend list for out-of-tree buildsGreg Kurz
Since commit "c53eeaf75a04 configure: eliminate Python dependency for --help", configure --help fails to produce the list of available trace backends if invoked out-of-tree. It also spits the following error: grep: scripts/tracetool/backend/*.py: No such file or directory This patch simply adds the missing $source_path to fix it. Signed-off-by: Greg Kurz <groug@kaod.org> Message-id: 149321376763.7874.12797658801011614451.stgit@bahia Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-26qga: Add 'guest-get-users' commandVinzenz Feenstra
A command that will list all currently logged in users, and the time since when they are logged in. Examples: virsh # qemu-agent-command F25 '{ "execute": "guest-get-users" }' {"return":[{"login-time":1490622289.903835,"user":"root"}]} virsh # qemu-agent-command Win2k12r2 '{ "execute": "guest-get-users" }' {"return":[{"login-time":1490351044.670552,"domain":"LADIDA", "user":"Administrator"}]} Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com> * make g_hash_table_contains compat func inline to avoid unused warnings Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' ↵Peter Maydell
into staging Xen 2017/04/21 + fix # gpg: Signature made Tue 25 Apr 2017 19:10:37 BST # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # gpg: aka "Stefano Stabellini <sstabellini@kernel.org>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits) move xen-mapcache.c to hw/i386/xen/ move xen-hvm.c to hw/i386/xen/ move xen-common.c to hw/xen/ add xen-9p-backend to MAINTAINERS under Xen xen/9pfs: build and register Xen 9pfs backend xen/9pfs: send responses back to the frontend xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal xen/9pfs: receive requests from the frontend xen/9pfs: connect to the frontend xen/9pfs: introduce Xen 9pfs backend 9p: introduce a type for the 9p header xen: import ring.h from xen configure: use pkg-config for obtaining xen version xen: additionally restrict xenforeignmemory operations xen: use libxendevice model to restrict operations xen: use 5 digit xen versions xen: use libxendevicemodel when available configure: detect presence of libxendevicemodel xen: create wrappers for all other uses of xc_hvm_XXX() functions xen: rename xen_modified_memory() to xen_hvm_modified_memory() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24block/vxhs.c: Add support for a new block device type called "vxhs"Ashish Mittal
Source code for the qnio library that this code loads can be downloaded from: https://github.com/VeritasHyperScale/libqnio.git Sample command line using JSON syntax: ./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 -msg timestamp=on 'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410", "server":{"host":"172.172.17.4","port":"9999"}}' Sample command line using URI syntax: qemu-img convert -f raw -O raw -n /var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0 Sample command line using TLS credentials (run in secure mode): ./qemu-io --object tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read -v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999", "vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}' [Jeff: Modified trace-events with the correct string formatting] Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com
2017-04-21configure: use pkg-config for obtaining xen versionJuergen Gross
Instead of trying to guess the Xen version to use by compiling various test programs first just ask the system via pkg-config. Only if it can't return the version fall back to the test program scheme. If configure is being called with dedicated flags for the Xen libraries use those instead of the pkg-config output. This will avoid breaking an in-tree Xen build of an old Xen version while a new Xen version is installed on the build machine: pkg-config would pick up the installed Xen config files as the Xen tree wouldn't contain any of them. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Tested-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-21xen: use 5 digit xen versionsJuergen Gross
Today qemu is using e.g. the value 480 for Xen version 4.8.0. As some Xen version tests are using ">" relations this scheme will lead to problems when Xen version 4.10.0 is being reached. Instead of the 3 digit schem use a 5 digit scheme (e.g. 40800 for version 4.8.0). Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-21configure: detect presence of libxendevicemodelPaul Durrant
This patch adds code in configure to set CONFIG_XEN_CTRL_INTERFACE_VERSION to a new value of 490 if libxendevicemodel is present in the build environment. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-21configure: eliminate Python dependency for --helpStefan Hajnoczi
The ./configure script should produce --help output even if Python is not installed. Listing trace backends is simple: show the names of all Python modules in scripts/tracetool/backend/ whose source code contains 'PUBLIC = True'. Perform the backend enumeration in shell instead of Python so that we can move the Python check until after ./configure --help. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20170328134418.3426-1-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>