Age | Commit message (Collapse) | Author |
|
Buffered bulk mode is intended for bulk *input* endpoints, where the data is
of a streaming nature (not part of a command-response protocol). These
endpoints' input buffer may overflow if data is not read quickly enough.
So in buffered bulk mode the usb-host takes care of the submitting and
re-submitting of bulk transfers.
Buffered bulk mode is necessary for reliable operation with the bulk in
endpoints of usb to serial convertors. Unfortunatelty buffered bulk input
mode will only work with certain devices, therefor this patch also adds a
usb-id table to enable it for devices which need it, while leaving the
bulk ep handling for other devices unmodified.
Note that the bumping of the required usbredir from 0.5.3 to 0.6 does
not mean that we will now need a newer usbredir release then qemu-1.3,
.pc files reporting 0.5.3 have only ever existed in usbredir builds directly
from git, so qemu-1.3 needs the 0.6 release too.
Changes in v2:
-Split of quirk handling into quirks.c
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.
Test coverage will be reported after each test.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* stefanha/trivial-patches:
spice: drop incorrect vm_change_state_handler() opaque
linux-user/syscall.c: remove forward declarations
hw/mcf5206: Reduce size of lookup table
Remove --sparc_cpu option from the configure list
pseries: Remove unneeded include statement (fixes MinGW builds)
pc_sysfw: Check for qemu_find_file() failure
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
commit 9b9c37c36439ee0452632253dac7a31897f27f70 always assume sparcv9,
the others are no longer supported. Remove --sparc_cpu option from the
configure list.
Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Incremental builds added new lines to that file each time when configure
was run.
Now a new file with a comment line is written.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The virtio-blk-data-plane feature only works with Linux AIO. Therefore
add a ./configure option and necessary checks to implement this
dependency.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Existing compile-time detection is spotty at best. Convert
it all to runtime detection instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
When we build neither any system emulation targets nor the tools there
is actually no need for pixman library. In that case do not enforce
presence of that library on the system.
Reviewed-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
vnc-tls.h is included by vnc.h, and it includes gnutls/gnutls.h.
Hence, GnuTLS header files are needed by all files that include
vnc.h, most notably qmp.c. Move these flags to QEMU_CFLAGS for
simplicity.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make it correct for nested directories, and move the static part
from Makefile to configure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Probe pkg-config before it is used for the first time (libseccomp check).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This reverts commit 288fa40736e6eb63132d01aa6dc21ee831b796ae.
The only reason old pixman versions didn't work was the missing
PIXMAN_TYPE_BGRA, which is properly #ifdef'ed now. So we don't
have to require a minimum pixman version.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* stefanha/trivial-patches:
pc_sysfw: Plug memory leak on pc_fw_add_pflash_drv() error path
qemu-options: Fix space at EOL
Fix spelling in comments and documentation
Clean up pci_drive_hot_add()'s use of BlockInterfaceType
arm: a9mpcore: remove un-used ptimer_iomem field
target-sparc: Remove t0, t1 from CPUSPARCState
target-m68k: Remove t1 from CPUM68KState
target-alpha: Remove t0, t1 from CPUAlphaState
s390x: Spelling fixes (endianess -> endianness, occured -> occurred)
Fix comments (adress -> address, layed -> laid, wierd -> weird)
Fix spelling (prefered -> preferred)
configure: Remove stray debug output
sd: Send debug printfery to stderr not stdout
Conflicts:
configure
Resolve spelling conflict in configure.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Default to 'cc' as our compiler, rather than 'gcc'. We used to have
to insist on gcc when we still kept the CPU env in a fixed global
register, but this is no longer necessary and we will now compile OK
on clang as well as gcc. Using 'cc' should generally result in us
using the most standard and maintained system compiler for the
platform. (For instance on newer MacOS X 'gcc' exists but is an
elderly compiler provided mostly for legacy reasons, and 'cc'
(which is clang) is definitely the better choice.) On Linux there
will generally be no user-visible change since cc will be gcc.
This changeover necessitates a slight reworking of how we set the
'cc' variable, because GNU cross toolchains generally provide a
'${cross_prefix}gcc' but not a '${cross_prefix}cc'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
When older versions are found the internal pixman version is prefered.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Rather than printing a message saying we're silently falling
back to gthread coroutines when running on MacOS, actually
do it silently.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
These versions of GCC require insane (>2GB) amounts of memory to compile
translate.o. As a countermeasure, disable the culprit optimization pass.
This should fix the buildbot failure for default_x86_64_fedora16. Anyway
this is a good thing to do because people will try to compile 1.3 with
less than 2GB of memory and complain.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Commit 32761257c0b9fa7ee04d2871a6e48a41f119c469 enabled
qemu_ld/st optimization unconditionally for some hosts.
The TCG interpreter still does not support this kind of
optimization. Therefore builds with TCI fail with an
unresolved symbol tcg_out_tb_finalize. This is fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Debian Wheezy has version 0.1.0 which is not compatible, avoid it.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Set --host when calling pixman configure while doing cross builds so
pixman's autoconf picks up the cross build tools correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Needed to make sure the (generated) pixman-version.h file is found.
Based on a patch from Blue Swirl.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: malc <av1474@comtv.ru>
|
|
Enable CONFIG_QEMU_LDST_OPTIMIZATION for TCG qemu_ld/st optimization only when
a host is i386 or x86_64.
Signed-off-by: Yeongkyoon Lee <yeongkyoon.lee@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* kraxel/usb.69: (31 commits)
usb-redir: Allow redirecting super speed devices to high speed controllers
usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
usb-redir: Use reject rather the disconnect on bad ep info
usb-redir: Add an usbredir_setup_usb_eps() helper function
usb-redir: Add support for input pipelining
usb-redir: Add support for 32 bits bulk packet length
combined-packet: Add a workaround for Linux usbfs + live migration
usb: Add packet combining functions
uhci: Don't crash on device disconnect
uhci: Add a uhci_handle_td_error() helper function
usb/ehci-pci: add helper to create ich9 usb controllers
usb/ehci-pci: add ich9 00:1a.* variant
usb/ehci-pci: dynamic type generation
uhci: add ich9 00:1a.* variants
uhci: stick irq routing info into UHCIInfo too.
uhci: dynamic type generation
xilinx_zynq: add USB controllers
usb/ehci: add sysbus variant
usb/ehci: split into multiple source files
usb/ehci: Guard definition of EHCI_DEBUG
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
gcc will silently accept unrecognized -Wno-wombat warning suppression
options (it only mentions them if it has to print a compiler warning
for some other reason). Since we already run a check for whether gcc
recognizes the warning options we use, we can easily make this use
the positive sense of the option when checking for support for the
suppression option. This doesn't have any effect except that it avoids
gcc emitting extra messages about unrecognized command line options
when it is printing other warning messages.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Older glibc (RHEL 5.x, Debian 5.x) does not have the _sigev_un._tid
member in its structure definition, while the accompanying kernel
headers do define SIGEV_THREAD_ID. We need configure to check for
both before using it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
When building qemu-kvm for openSUSE:Factory, I am getting a
warning in the pipe2 detection performed by configure, which
prevents using --enable-werror.
Change detection code to use return value of pipe2.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Disable clang's initializer-overrides warnings, as QEMU makes significant
use of the pattern of initializing an array with a range-based default
entry like
[0 ... 0x1ff] = { GPIO_NONE, 0 }
followed by specific entries which override that default, and clang
would otherwise warn "initializer overrides prior initialization of
this subobject" when it encountered the specific entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
commit 38f419f35225 fixed a breakage with CONFIG_QEMU_HELPERDIR
which has been introduced by 8bf188aa18ef7a8. But while techinically
that fix has been correct, all other similar variables are handled
differently. Make it consistent, and let scripts/create_config
expand and capitalize the variable properly like for all other
qemu_*dir variables.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
We need to evaluate $libexecdir in configure, otherwise we literally end
up with "${prefix}/libexec" instead of the absolute path as
CONFIG_QEMU_HELPERDIR.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
git://git.linaro.org/people/rikuvoipio/qemu
* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
linux-user: register align p{read, write}64
linux-user: ppc: mark as long long aligned
tcg: Remove TCG_TARGET_HAS_GUEST_BASE define
configure: Remove unnecessary host_guest_base code
linux-user: If loading fails, print error as string, not number
linux-user: Fix siginfo handling
alpha-linux-user: Fix sigaltstack structure definition
linux-user: Implement gethostname
linux-user: Perform more checks on iovec lists
linux-user: fix multi-threaded /proc/self/maps
linux-user: fix statfs
|
|
This modification is required if compiler option -Wunused-parameter is activated.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
* stefanha/trivial-patches:
vnc: fix "info vnc" with "-vnc ..., reverse=on"
sheepdog: use bool for boolean variables
configure: Tidy up remnants of non-64-bit physaddrs
|
|
* mdroth/qga-pull-10-9-12:
qemu-ga: ga_open_pidfile(): add new line to pidfile
qemu-ga: use state dir from CONFIG_QEMU_LOCALSTATEDIR
configure: add --localstatedir
|
|
All TCG hosts now support guest-base functionality, so we can
remove the setting of host_guest_base to 'yes' in every arm
of the case "$cpu" statement, and simply set guest_base to
default to 'yes'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Tidy up some remnants of code to support non-64-bit physaddrs
which were accidentally omitted from commit 4be403c8.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Next commit wants to use it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
With the next qemu version (1.3) we are going to bump the qxl device
revision to 4. The new features available require a recent spice-server
version, so raise up the bar. Otherwise we would end up with different
qxl revisions depending on the spice-server version installed, which
would be a major PITA when it comes to compat properties.
Clear out a big bunch of #ifdefs which are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
|
|
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y and
hw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|