aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)Author
2009-12-02configure: use correct cflags in compiler checksMichael S. Tsirkin
linux-user build on fedora 11 breaks because fallocate is broken on that system if -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 are specified, which is what QEMU uses. We do have a configure check to catch this and disable fallocate, however, it turns out that default QEMU_CFLAGS/LDFLAGS were assigned in script *after* all compiler checks: so during checks we were not running compiler with same flags that we used for build later. Fix this by moving QEMU_CFLAGS to before compiler checks, and using comple_prog when checking for fallocate. This also fixes the fact that we do some compiler checks while assigning the flags, right below a comment that says "no cc tests beyond this point". Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-01tcg: initial mips supportAurelien Jarno
Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-29Add support for GNU/kFreeBSDAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-22Makefile dependencies for device configsPaul Brook
Add makefile dependencies for target specific device configs. These will copy the default config if none exists, obsoleting the old configure time code. If a config already exists but is older than the default then print a warning. Also remove config-devices.h. Code does not and should not care which devices are being built. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-21configure: Fix spelling in comment and rework the commentStefan Weil
* Replace vill -> will. * Comment was formatted to make it more readable and to conform to the coding standard, too. * Description of foo="" was completed. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-21qemu-io: build on all platformsAurelien Jarno
Since c32d766af127f68bb75ba5689f2f5239227bf559, qemu-io should be portable. It is currently built only on linux and mingw32. This patch enables qemu-io on all platforms. Tested on FreeBSD. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-18audio: link with -lpulse in addition to -lpulse-simpleAurelien Jarno
Link with -lpulse in addition to -lpulse-simple, needed when --no-add-needed is passed to the linker (gold default). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-17Fix typoBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-17Prevent configuring for a user emulator on a different type of OSBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-17Add a unit test for JSON supportAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-17Add unit test for QFloatAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-17Cleanup configure checks for dup3 and fallocateJan Kiszka
We have a function for this which does not issue annoying warnings. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09Configurable block format whitelistMarkus Armbruster
We have code for a quite a few block formats. While I trust that all of these formats are useful at least for some people in some circumstances, some of them are of a kind that friends don't let friends use in production. This patch provides an optional block format whitelist, default off. If a whitelist is configured with --block-drv-whitelist, QEMU proper can use only whitelisted formats. Other programs, like qemu-img, are not affected. Drivers for formats off the whitelist still participate in format probing, to ensure all programs probe exactly the same. Without that, QEMU proper would be prone to treat images with a format off the whitelist as raw when the image's format is probed. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-02Fix the build when srcdir == objdirAnthony Liguori
You would only see this error on a fresh clone when srcdir == objdir. configure will fail because roms/pcbios doesn't exist. git submodule integration doesn't cleanup very well when switching between branches so you'll get an roms/pcbios directory from normal operations if you switch between old branches. Thanks to a mistake in configure, if you build outside of srcdir, you'll also get a valid roms/pcbios. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30build: add CONFIG_LINUXMark McLoughlin
So I can add a tap-linux.c and use CONFIG_LINUX to pull it in in Makefile Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30net: move net-queue.[ch] under net/Mark McLoughlin
[v2: handle building in a separate dir] Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-21Merge commit 'linux-user/linux-user-for-upstream' into stagingAnthony Liguori
2009-10-18Suppress warnings about 'warn_unused_result' attribute directiveBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-15implementations of dup3 and fallocate that are good enough to fool LTPUlrich Hecht
updated fallocate check to new configure, added dup3 check as suggested by Jan-Simon Möller. Riku: updated to apply to current git. Signed-off-by: Ulrich Hecht <uli@suse.de> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2009-10-15configure: clean temporary executable files even on Windowsmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-11Fix bswap in commentStefan Weil
Replace bsawp -> bswap. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-11Move dependency generation falgs out of configuremalc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-11configure: clean up temporary dependency filesmalc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-10Windows Waveform Audio driver (no ADC support yet)malc
Signed-off-by: malc <av1474@comtv.ru>
2009-10-08Introduce QList unit-testsLuiz Capitulino
This suite contains tests to assure that QList API works as expected. To execute it you should have check installed and build QEMU with check support enabled (--enable-check-utests) and then run: $ ./check-qlist Patchworks-ID: 35333 Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Generate gdbstub-xml.c only when neededJuan Quintela
First user of new config-devices.mak Patchworks-ID: 35198 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Add new config-devices.mak for each targetJuan Quintela
We generate config-devices.h from there automatically. We need to do it in main Makefile, because we are going to need a main Makefile for them. Patchworks-ID: 35196 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Move generation of config-target.h to Makefile from configureJuan Quintela
Patchworks-ID: 35194 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Rename config.{h, mak} config-target.{h, mak}Juan Quintela
Add config.h file that includes config-target.h and config-host.h Patchworks-ID: 35193 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Move generation of config-host.h to Makefile from configureJuan Quintela
Use timestamp based appreach to avoid not needed recompilation. Add it to rules.mak Many thanks to Paolo Bonzini for helpding the design, and the debug. Patchworks-ID: 35190 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Don't include config-host.mak from inside config.makJuan Quintela
Include it directly in Makefile.target Patchworks-ID: 35189 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06AIOLIBS is not used anywhereJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Add -Wold-style-* flagsJuan Quintela
This time, I add them in configure only if target compiler supports it Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05slirp: It needs to use QEMU_CFLAGS not CFLAGSJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-04Check availability of uuid header / libraryStefan Weil
If available, the Universally Unique Identifier library is used by the vdi block driver. Other parts of QEMU (vl.c) could also use it. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-02Use GNU ld to link roms on OpenSolarisBlue Swirl
OpenSolaris ld seems to miss the equivalent of GNU ld's "-Ttext 0". Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-27Compile some user files only once for all targetsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-27Don't compile roms if not building system targetsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20Probe for fdatasync()Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-16fix typo in configure --helpAndre Przywara
Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-13configure: change "found" to "find"Sebastian Herbszt
Change "ERROR: configure was not able to found it" to "ERROR: configure was not able to find it". Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-13Revert "Fix Sparc/Linux host breakage by ↵Blue Swirl
df70204db53e3611af986f434e74a882bce190ca" This reverts commit 91b40c5be84a478e98c0416325844a7f66d0efae. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-13Fix Sparc/Linux host breakage by df70204db53e3611af986f434e74a882bce190caBlue Swirl
While i386, x86_64 and Sparc64/OpenBSD still worked after df70204db53e3611af986f434e74a882bce190ca, Sparc32 and Sparc64 Linux hosts broke. Partially revert the commit: make the restored code conditional to !CONFIG_USER_PIE. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12Add configure option to compile user targets as PIEKirill A. Shutemov
Build uset targers as true PIE if user want to keep qemu self-virtualizable. v5: - Split into to patches: drop link hack and add PIE support - do not build PIE by default and drop toolchain check v4: - Add test for toolchain if it has proper PIE support v3: - One more pice of the hack was removed - Description updated v2: - Add configure options do enable/disable PIE for usermode targets. Disabling can be useful if you build uswing toolchain which has broken PIE support. PIE for usermode targets enabled by default. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12Fix text relocations in linux-user targetsKirill A. Shutemov
There is a link hack in linux-user which produces an executable that looks like PIE, but always has text relocations since all object files isn't position-independent (compiled without -fpic/-fpie). Dynamic loader has to do more work to load a binary with text relocations. The best way to keep this functionality is to build a true PIE without text relocations. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12Do not link usermode targets with libhw*.aKirill A. Shutemov
Usermode targets are hardware-independed. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12Add #defines needed by OpenSolaris, fix breakage by the #definesBlue Swirl
We need to define _XOPEN_SOURCE and __EXTENSIONS__ macros in order to get CMSG_ and TIOCWIN macros defined. But then _POSIX_C_SOURCE gets defined, which is (incorrectly) used as an indicator for existence of posix_memalign() in osdep.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12Fix OpenSolaris build breaking typosBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12Fix a Sparse warning about redefinition of offsetof()Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-09configure: fix Linux AIO detectionLuiz Capitulino
We should set $linux_aio to 'no' if detection failed, otherwise its contents will be empty, which is a bug as we test for 'yes' or 'no'. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 15:32:19 +0000