aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)Author
2010-04-01tcg: initial ia64 supportAurelien Jarno
A few words about design choices: * On IA64, instructions should be grouped by bundle, and dependencies between instructions declared. A first version of this code tried to schedule instructions automatically, but was very complex and too invasive for the current common TCG code (ops not ending at instruction boundaries, code retranslation breaking already generated code, etc.) It was also not very efficient, as dependencies between TCG ops is not available. Instead the option taken by the current implementation does not try to fill the bundle by scheduling instructions, but by providing ops not available as an ia64 instruction, and by offering 22-bit constant loading for most of the instructions. With both options the bundle are filled at approximately the same level. * Up to 128 registers can be affected to a function on IA64, but TCG limits this number to 64, which is actually more than enough. The register affectation is the following: - r0: used to map a constant argument with value 0 - r1: global pointer - r2, r3: internal use - r4 to r6: not used to avoid saving them - r7: env structure - r8 to r11: free for TCG (call clobbered) - r12: stack pointer - r13: thread pointer - r14 to r31: free for TCG (call clobbered) - r32: reserved (return address) - r33: reserved (PFS) - r33 to r63: free for TCG * The IA64 architecture has only 64-bit registers and no 32-bit instructions (the only exception being cmp4). Therefore 64-bit registers and instructions are used for 32-bit ops. The adopted strategy is the same as the ABI, that is the higher 32 bits are undefined. Most ops (and, or, add, shl, etc.) can directly use the 64-bit registers, while some others have to sign-extend (sar, div, etc.) or zero-extend (shr, divu, etc.) the register first. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01ia64 disas supportAurelien Jarno
Taken from binutils SVN, using last GPLv2 version. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01vhost: vhost net supportMichael S. Tsirkin
This adds vhost net device support in qemu. Will be tied to tap device and virtio by following patches. Raw backend is currently missing, will be worked on/submitted separately. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-30Get bsd-user host page protection code working on FreeBSD hostsJuergen Lock
Use kinfo_getvmmap(3) on FeeBSD >= 7.x and /compat/linux/proc on older FreeBSD. (kinfo_getvmmap is preferred since /compat/linux/proc is usually only mounted on hosts also using the Linuxolator.) This patch is a bit hacky because the includes needed for kinfo_getvmmap conflict with other definitions in exec.c by default so I had to `trick around' a little, but I built the result in FreeBSD 6.4-stable and 7.2-stable tbs and on 8-stable on the host so the hacks at least should be stable. (If this is a problem maybe we could also move the kinfo_getvmmap invocations into a seperate source file but that would be more work...) Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27tcg-mips: add guest base supportAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26linux-user: add inotify_init1 syscall supportRiku Voipio
New syscall which gets actively used when you have a fresh kernel. Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-21Compile most IDE devices only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile disassemblers only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-13configure: fix --sysconfdir specificationAndre Przywara
--sysconfdir requires a parameter (the path), this should be reflected in the case pattern. Reported-by: Frank Arnold <frank.arnold@amd.com> Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-12Remove userspace target_phys_addr_tPaul Brook
TARGET_PHYS_ADDR_BITS isn't meaningful for userspace emulation, so don't define it. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-09configure: Fix code which creates config.mak filesStefan Weil
These files are created by configure and grow unnecessarily at each new call of configure: roms/seabios/config.mak roms/vgabios/config.mak libhw32/config.mak libhw64/config.mak libhw32/config.mak and libhw64/config.mak set compiler options, and the wrong old code results in very long command lines. The new code always writes a new config.mak instead of appending to an existing one. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09configure: Fix wrong stderr redirectionStefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-06Documentation: Modify rule for html output (better looking output format)Stefan Weil
To create html output from texi input, texi2html was used. Output from makeinfo looks cleaner, so replace the old rule and use makeinfo now. For those who want to use their own variant of html output, the macros MAKEINFO and MAKEINFOFLAGS allow customisation. Option "-I ." is not needed (the current directory is searched by default), so remove it. Please note that the build requirements changed, too: makeinfo is required for doc builds. texi2html is no longer used. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-19mingw32: Enable C99/POSIX format stringsStefan Weil
Starting with mingw32-runtime 3.15, C99/POSIX format strings (%zu, %lld, ...) are supported by defining __USE_MINGW_ANSI_STDIO=1. As QEMU uses such format strings, unconditionally define this macro. It won't hurt on older revisions of mingw32-runtime. Tested with manually installed mingw32-runtime 3.15 on debian (cross compiled + wine). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Debugging supportLuiz Capitulino
Add configure options (--enable-debug-mon and --disable-debug-mon) plus the MON_DEBUG() macro. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-08configure: fix the static compilation for sdlTeLeMan
The static compilation for sdl is broken after 79427693174a553d62f3da44aacd3f19ba8df3a7. Signed-off-by: TeLeMan <geleman@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-08configure: Add --enable-docs and --disable-docs to --helpDirk Ullrich
This patch adds the documentation-related options "--enable-docs" and "--disable-docs" to the help message of "configure". Signed-off-by: Dirk Ullrich <dirk.ullrich@googlemail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-06Add -static earlier to LDFLAGS for compile_prog()Loïc Minier
Add -static to LDFLAGS earlier as to run the compile_prog() tests with this flags, this will avoid turning on features for which a shared library is available but not a static one. Signed-off-by: Loïc Minier <lool@dooz.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-06configure: remove debugging code introduced in ↵Aurelien Jarno
aa527b65d8187b97d73f889b6cae7b6ac6f82d32 Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-06configure: fix compilation on hosts without -fstack-protector-allAurelien Jarno
Commit a0f291fc101a7ab3e40850a329da2cc2f2cd1f2d has enabled -fstack-protector-all on all targets, as the configure test is bogus. GCC only emits a warning and not an error if this option is not supported, so the configure scripts doesn't detect the problem. This patch changes the configure script to try the various flags with -Werror in addition to catch the possible warnings. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-01-28Solaris: test for presence of commands with has()Loïc Minier
Signed-off-by: Loïc Minier <lool@dooz.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-28Add and use has() and path_of() funcsLoïc Minier
Add has() and path_of() funcs and use them across configure; has() will test whether a command or builtin is available; path_of() will search the PATH for executables and return the full pathname if found. Signed-off-by: Loïc Minier <lool@dooz.org Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-28Check for sdl-config before calling itLoïc Minier
Check whether sdl-config is available before calling it, otherwise ./configure triggers a warning: ./configure: 957: sdl-config: not found If neither the .pc file not sdl-config are present, disable SDL support. Signed-off-by: Loïc Minier <lool@dooz.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-26Check availavility of -fstack-protector-allJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26Enable _FORTIFY_SOURCE=2Kirill A. Shutemov
_FORTIFY_SOURCE is a Glibc feature which adds memory and string function protection. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-24Support --sysconfdir in configure to specify path to configuration filesAnthony Liguori
The default value is ${prefix}/etc/qemu. --sysconfdir can be used to override the default to an absolute path. The expectation is that when installed to /usr, --sysconfdir=/etc/qemu will be used. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13use pkg-config for libcurl whenever availablePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13use pkg-config for sdl whenever availablePaolo Bonzini
Together with the first patch this enables using the prefixed pkg-config, thus picking up the correct flags for SDL. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13fixes to the static compilation case for sdlPaolo Bonzini
After the next commit, pkg-config could be used for the shared library configuration case and sdl-config for static libraries. So I prepare the test here by doing two changes: at the same time I remove useless backslashes from the invocation of grep; 1) fixing a typo ($sd_cflags). The typo has been there since commit 1ac88f2 (remove sdl_static. Just do the right thing if static is yes, 2009-07-27). 2) fixing an erroneous "test `... | grep > /dev/null`" idiom that would never succeed since grep's output would be empty; 3) checking the status code after executing sdl-config --static --libs; this is needed for the next patch only. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13use cross-prefix for pkgconfigPaolo Bonzini
Since pkgconfig can give different output for different targets, it should be tried with the cross-compilation prefix first. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-12kvm: Detect availability of kvm_para.hJan Kiszka
Will be required for upcoming KVM cpuid leaf. Host kernels >= 2.6.32 as well as future kvm-kmod releases (more recent than kvm-kmod-2.6.32.3) do/will provide them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-12kvm: Use kvm-kmod headers if availableJan Kiszka
Since kvm-kmod-2.6.32.2 we have an alternative source for recent KVM kernel headers. Use it when available and not overruled by --kerneldir. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08finish VPATH -> vpath translationPaolo Bonzini
This adds a few more vpath suffixes and points the remaining two paths explicitly to $(SRC_PATH) in order to eliminate the VPATH assignment from config-host.mak. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-07Drop --whole-archive and static librariesAndreas Färber
Juan has contributed a cool Makefile infrastructure that enables us to drop static libraries completely: Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-}, and link those object files directly into the executables. Replace HWLIB by HWDIR, specifying only the directory. Drop --whole-archive and ARLIBS in Makefiles and configure. Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all common objects after generating a target-specific header; add dependency rules to Makefile and Makefile.target instead. v2: - Don't try to include /config.mak for user emulators - Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted by "user_only: compile everything with -fpie" (Kirill A. Shutemov) v3: - Fix dependency modelling for tools - Remove comment on GENERATED_HEADERS obsoleted by this patch Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Palle Lyckegaard <palle@lyckegaard.dk> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Cc: Juan Quintela <quintela@trasno.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-23Compile qemu-nbd also on OpenBSD and SolarisBlue Swirl
basename() needs #include <libgen.h>. No prototype for daemon() is available on Solaris, but link succeeds. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-19user_only: compile everything with -fpieKirill A. Shutemov
We really need compile _all_ sources for user target with -fpie when use --enable-user-pie. It's regression introduced by commit add16157d72454. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13target-alpha: Enable softfloat.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-12Do not abort on qemu_malloc(0) in production buildsAnthony Liguori
qemu_malloc() does not allow size=0 to be passed in and aborts on this behavior. Unfortunately, there is good reason to believe that within qemu, there are a number of, so far, undetected places that assume size=0 can be safely passed. Since we do not want to abort unnecessarily in production builds, return qemu_malloc(1) whenever the version file indicates that this is a production build. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-05Add KVM support for S390xAlexander Graf
S390x was one of the first platforms that received support for KVM back in the day. Unfortunately until now there hasn't been a qemu implementation that would enable users to actually run guests. So let's include support for KVM S390x in qemu! Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05S/390 host/target build system supportAlexander Graf
This patch makes configure aware of S390 hosts and guests. When not explicitly defined using --target-list= no S390 targets will be built though. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-03Suppress optionrom build on Solaris x86Andreas Faerber
To avoid the build failing with: gcc -Wall -Wstrict-prototypes -Werror -fomit-frame-pointer -fno- builtin -I/export/home/andreas/QEMU/qemu -Wall -Wstrict-prototypes - Werror -fomit-frame-pointer -fno-builtin -I/export/home/andreas/QEMU/ qemu -c -o multiboot.o multiboot.S /var/tmp//ccd3aWyk.s: Assembler messages: /var/tmp//ccd3aWyk.s:15: Error: value of 512 too large for field of 1 bytes at 0000000000000002 gmake[1]: *** [multiboot.o] Error 1 disable recursion into pc-bios/optionrom, as done for Darwin already. Signed-off-by: Andreas Faerber <andreas.faerber@web.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03Don't leak file descriptorsKevin Wolf
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file descriptors that don't need to be passed to children to stop this misbehaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-02configure: use correct cflags in compiler checksMichael S. Tsirkin
linux-user build on fedora 11 breaks because fallocate is broken on that system if -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 are specified, which is what QEMU uses. We do have a configure check to catch this and disable fallocate, however, it turns out that default QEMU_CFLAGS/LDFLAGS were assigned in script *after* all compiler checks: so during checks we were not running compiler with same flags that we used for build later. Fix this by moving QEMU_CFLAGS to before compiler checks, and using comple_prog when checking for fallocate. This also fixes the fact that we do some compiler checks while assigning the flags, right below a comment that says "no cc tests beyond this point". Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-01tcg: initial mips supportAurelien Jarno
Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> A few words about design choices: * Two registers, at and t0, are reserved for TCG internal use. They are useful for bswap and 64-bit ops. * Most ops supports a constant argument with value 0, which is actually mapped to the zero register. * While the at register is available for constant loading, ops only support a limited range of constants. TCG does a better job doing the register allocation and constant loading by itself. There are plenty of registers available anyway. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-29Add support for GNU/kFreeBSDAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-22Makefile dependencies for device configsPaul Brook
Add makefile dependencies for target specific device configs. These will copy the default config if none exists, obsoleting the old configure time code. If a config already exists but is older than the default then print a warning. Also remove config-devices.h. Code does not and should not care which devices are being built. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-21configure: Fix spelling in comment and rework the commentStefan Weil
* Replace vill -> will. * Comment was formatted to make it more readable and to conform to the coding standard, too. * Description of foo="" was completed. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-21qemu-io: build on all platformsAurelien Jarno
Since c32d766af127f68bb75ba5689f2f5239227bf559, qemu-io should be portable. It is currently built only on linux and mingw32. This patch enables qemu-io on all platforms. Tested on FreeBSD. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-18audio: link with -lpulse in addition to -lpulse-simpleAurelien Jarno
Link with -lpulse in addition to -lpulse-simple, needed when --no-add-needed is passed to the linker (gold default). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-17Fix typoBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 08:41:04 +0000