aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)Author
2013-09-11Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130910' into ↵Anthony Liguori
staging ARM queue: * aarch64 preparation patchset (excluding the defconfigs, so this doesn't actually enable the new targets yet) * minor bugfixes and cleanups * disable "-cpu any" in system emulation mode * fix ARMv7M stack alignment on reset # gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE # gpg: Can't check signature: public key not found # By Alexander Graf (13) and others # Via Peter Maydell * pmaydell/tags/pull-target-arm-20130910: (28 commits) configure: Add handling code for AArch64 targets linux-user: Add AArch64 support linux-user: Allow targets to specify a minimum uname release linux-user: Add AArch64 termbits.h definitions linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64 linux-user: Make sure NWFPE code is 32 bit ARM only linux-user: Add signal handling for AArch64 linux-user: Fix up AArch64 syscall handlers linux-user: Add syscall number definitions for AArch64 linux-user: Add cpu loop for AArch64 linux-user: Don't treat AArch64 cpu names specially target-arm: Add AArch64 gdbstub support target-arm: Add AArch64 translation stub target-arm: Prepare translation for AArch64 code target-arm: Disable 32 bit CPUs in 64 bit linux-user builds target-arm: Add new AArch64CPUInfo base class and subclasses target-arm: Pass DisasContext* to gen_set_pc_im() target-arm: Fix target_ulong/uint32_t confusions target-arm: Export cpu_env target-arm: Extract the disas struct to a header file ... Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-10configure: Add handling code for AArch64 targetsAlexander Graf
Add the necessary code to configure to handle AArch64 as a target CPU (we already have some code for supporting it as host). Note that this doesn't enable the AArch64 targets yet. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-23-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-12-git-send-email-john.rigby@linaro.org [PMM: * don't need to set TARGET_ABI_DIR to aarch64 as that is the default * don't build nwfpe -- this is 32 bit legacy only * rewrite commit message * add aarch64 to the list of "fdt required" targets ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-09qemu-ga: Add Windows VSS provider and requester as DLLTomoki Sekiyama
Adds VSS provider and requester as a qga-vss.dll, which is loaded by Windows VSS service as well as by qemu-ga. "provider.cpp" implements a basic stub of a software VSS provider. Currently, this module only relays a frozen event from VSS service to the agent, and thaw event from the agent to VSS service, to block VSS process to keep the system frozen while snapshots are taken at the host. To register the provider to the guest system as COM+ application, the type library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl), VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also adds pre-compiled .tlb file in the repository in order to enable cross-compile qemu-ga.exe for Windows with VSS support. "requester.cpp" provides the VSS requester to kick the VSS snapshot process. Qemu-ga.exe works without the DLL, although fsfreeze features are disabled. These functions are only supported in Windows 2003 or later. In older systems, fsfreeze features are disabled. In several versions of Windows which don't support attribute VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error. To solve this fundamentally, we need a framework to handle mount writable snapshot on guests, which is required by VSS auto-recovery feature (cleanup phase after a snapshot is taken). Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09qemu-ga: Add configure options to specify path to Windows/VSS SDKTomoki Sekiyama
To enable VSS support in qemu-ga for Windows, header files included in VSS SDK are required. The VSS support is enabled by the configure option like below: ./configure --with-vss-sdk="/path/to/VSS SDK" If the path is omitted, it tries to search the headers from default paths and VSS support is enabled only if the SDK is found. VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is specified. VSS SDK is available from: http://www.microsoft.com/en-us/download/details.aspx?id=23490 To cross-compile using mingw, you need to setup the SDK on Windows environments to extract headers. You can also extract the SDK headers on POSIX environments using scripts/extract-vss-headers and msitools. In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to specify path to Windows SDK, which may be used for native-compile of .tlb file of qemu-ga VSS provider. However, this is usually unnecessary because pre-compiled .tlb file is included. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09configure: Support configuring C++ compilerTomoki Sekiyama
Add configuration for C++ compiler in configure and Makefiles. The C++ compiler is choosed as following: - ${CXX}, if it is specified. - ${cross_prefix}g++, if ${cross_prefix} is specified. - Otherwise, c++ is used. Currently, usage of C++ language is only for access to Windows VSS using COM+ services in qemu-guest-agent for Windows. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Micael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-03Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Stefan Weil (6) and others # Via Michael Tokarev * mjt/trivial-patches: aio / timers: use g_usleep() not sleep() adlib: sort offsets in portio registration qmp: fix integer usage in examples tci: Remove function tcg_out64 (fix broken build) target-arm: Report unimplemented opcodes (LOG_UNIMP) pflash_cfi02.c: fix debug macro configure: Remove unneeded redirections of stderr (pkg-config --exists) configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs) configure: Don't write .pyc files by default (python -B) curl: qemu_bh_new() can never return NULL slirp/arp_table.c: Avoid shifting into sign bit of signed integers configure: disable clang -Wstring-plus-int warning rdma: silly ipv6 bugfix misc: Fix some typos in names and comments slirp: Port redirection option behave differently on Linux and Windows Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-02configure: Allow x32 as a hostRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-01configure: Remove unneeded redirections of stderr (pkg-config --exists)Stefan Weil
Predicate options (--exists, --atleast-version, ...) of pkg-config dont't print error messages to stderr, so redirecting stderr is not necessary. Combining a predicate option with --modversion is not necessary for tests. Instead of testing with --modversion, --exists can be used. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-01configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)Stefan Weil
For existing libraries, pkg-config --cflags and pkg-config --libs won't print error messages to stderr, so redirecting stderr is not necessary. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-01configure: Don't write .pyc files by default (python -B)Stefan Weil
When a Python script is run, Python normally writes bytecode into a .pyc file. QEMU's build process uses several Python scripts which are called from configure or make. The generated .pyc files take disk space without being of much use, because those scripts are short, not time critical and only called a few times. Python's option -B disables writing of .pyc files. QEMU now uses "python -B" as default, but it is still possible to choose a different call by passing --python=PYTHON to configure. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-01configure: disable clang -Wstring-plus-int warningPeter Maydell
Some versions of clang will warn about adding integers to strings: disas/i386.c:4753:23: error: adding 'char' to a string does not append to the string [-Werror,-Wstring-plus-int] oappend ("%es:" + intel_syntax); ~~~~~~~^~~~~~~~~~~~~~ disas/i386.c:4753:23: note: use array indexing to silence this warning oappend ("%es:" + intel_syntax); ^ & [ ] disas/i386.c uses this idiom to to skip a "%" prefix if using intel rather than AT&T syntax. This seems like a reasonable thing to do, and I don't think anybody contributing to QEMU is likely to believe that '+' is a string concatenation operator in C, so just disable -Wstring-plus-int. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-08-22aio / timers: Add prctl(PR_SET_TIMERSLACK, 1, ...) to reduce timer slackAlex Bligh
Where supported, called prctl(PR_SET_TIMERSLACK, 1, ...) to set one nanosecond timer slack to increase precision of timer calls. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: add ppoll support with qemu_poll_nsAlex Bligh
Add qemu_poll_ns which works like g_poll but takes a nanosecond timeout. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-05Merge remote-tracking branch 'filippov/tags/20130729-xtensa' into stagingAnthony Liguori
xtensa queue 2013-07-29 * filippov/tags/20130729-xtensa: target-xtensa: check register window inline target-xtensa: don't generate dead code to access invalid SRs tests/tcg/xtensa: Fix out-of-tree build target-xtensa: avoid double-stopping at breakpoints target-xtensa: add fallthrough markers target-xtensa: add extui unit test Conflicts: configure Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-02qemu-ga: build it even if !systemMichael Tokarev
Move qemu-ga build check out of if softmmu.. into its own section. We want to build qemu-ga for _guest_ even if system build isn't done. It is controlled separately using --enable-guest-agent. Additionally, give error message if guest agent is requested but not supported. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-29tests: QAPI schema parser testsMarkus Armbruster
The parser handles erroneous input badly. To be improved shortly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1374939721-7876-2-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29tests/tcg/xtensa: Fix out-of-tree buildAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2013-07-26seccomp: no need to check arch in syscall whitelistEduardo Otubo
v2 update: - set libseccomp 2.1.0 as requirement on configure script. Since libseccomp 2.0 there's no need to check the architecture type anymore. Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1374518017-10424-2-git-send-email-otubo@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-26Merge remote-tracking branch 'rth/tcg-next' into stagingAnthony Liguori
# By Claudio Fontana (1) and others # Via Richard Henderson * rth/tcg-next: tcg: Remove temp_buf tcg/aarch64: Implement tlb lookup fast path tcg/aarch64: implement ldst 12bit scaled uimm offset Message-id: 1373919944-8521-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25Merge remote-tracking branch 'riku/linux-user-for-upstream' into stagingAnthony Liguori
* riku/linux-user-for-upstream: (21 commits) linux-user: Handle compressed ISA encodings when processing MIPS exceptions linux-user: Unlock mmap_lock when resuming guest from page_unprotect linux-user: Reset copied CPUs in cpu_copy() always linux-user: Fix epoll on ARM hosts linux-user: fix segmentation fault passing with h2g(x) != x linux-user: Fix pipe syscall return for SPARC linux-user: Fix target_stat and target_stat64 for OpenRISC linux-user: Avoid conditional cpu_reset() configure: Make NPTL non-optional linux-user: Enable NPTL for x86-64 linux-user: Add i386 TLS setter linux-user: Clean up handling of clone() argument order linux-user: Add missing 'break' in i386 get_thread_area syscall linux-user: Enable NPTL for m68k linux-user: Enable NPTL for SPARC targets linux-user: Enable NPTL for OpenRISC linux-user: Move includes of target-specific headers to end of qemu.h configure: Enable threading for unicore32-linux-user configure: Enable threading on all ppc and mips linux-user targets configure: Don't say target_nptl="no" if there is no linux-user target ... Conflicts: linux-user/main.c Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23rdma: core logicMichael R. Hines
Code that does need to be visible is kept well contained inside this file and this is the only new additional file to the entire patch. This file includes the entire protocol and interfaces required to perform RDMA migration. Also, the configure and Makefile modifications to link this file are included. Full documentation is in docs/rdma.txt Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-22configure: Make NPTL non-optionalPeter Maydell
Now all linux-user targets support building with NPTL, we can make it mandatory. This is a good idea because: * NPTL is no longer new and experimental; it is completely standard * in practice, linux-user without NPTL is nearly useless for binaries built against non-ancient glibc * it allows us to delete the rather untested code for handling the non-NPTL configuration Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the bsd-user codebase alone. This makes no change for bsd-user, since our configure test for NPTL had a "#include <linux/futex.h>" which means bsd-user would never have been compiled with CONFIG_USE_NPTL defined, and it still is not. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for x86-64Peter Maydell
Add x86-64 implementation of cpu_set_tls() (like the kernel, we just have to call do_arch_prctl() to set FS); this allows us to enable NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Add i386 TLS setterAlexander Graf
We can easily set the TLS on i386. Add code to do so. Signed-off-by: Alexander Graf <agraf@suse.de> [PMM: also remove "target_nptl=no" line from configure, for consistency with other patches in this series] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for m68kPeter Maydell
For m68k, per-thread data is a purely kernel construct with no CPU level support. Implement it via a field in the TaskState structure, used by cpu_set_tls() and the set_thread_area/get_thread_area syscalls. This allows us to enable compilation with NPTL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for SPARC targetsPeter Maydell
Provide the missing cpu_set_tls(), and resolve the FIXME in cpu_clone_regs() by clearing the carry flag for the child. This allows us to turn on building with NPTL for SPARC. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for OpenRISCPeter Maydell
The OpenRISC kernel ignores CLONE_SETTLS in its copy_thread() implementation, so a cpu_set_tls() implementation is a no-op. cpu_clone_regs() was setting the syscall return value in the wrong register -- it is gpr[11], not gpr[2]. With these two things fixed, we can compile with NPTL enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Jia Liu <proljc@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Enable threading for unicore32-linux-userPeter Maydell
unicore32-linux-user provides cpu_set_tls(), so the failure to enable target_nptl was presumably an oversight. Enable it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Enable threading on all ppc and mips linux-user targetsPeter Maydell
Though threading (target_nptl) was enabled on the base PPC and MIPS targets, it wasn't enabled for the variants mipsn32, mipsn32el, mips64, mips64el, ppc64 or ppc46abi32 (probably an oversight). Enable threading consistently on all these targets. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Don't say target_nptl="no" if there is no linux-user targetPeter Maydell
For architectures with no linux-user target, don't claim no NPTL support. This has no behavioural change, but it means that we won't accidentally add a new linux-user target without threading support in future (because attempting to do so would be a compile failure rather than a silent lack of support). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22configure: Flip default of target_nptlPeter Maydell
Most targets either (a) support threading or (b) don't have a linux-user/bsd-user target, so make it default to 'yes', with those targets that don't support threading having to specifically say so. This is a mechanical no-behaviour-change commit; some of the "no" entries it adds will be taken out in later patches. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-19gluster: Add discard support for GlusterFS block driver.Bharata B Rao
Implement bdrv_aio_discard for gluster. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-19gluster: Use pkg-config to configure GlusterFS block driverBharata B Rao
Use pkg-config to determine the version and library dependency for GlusterFS block driver. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-18configure: Provide more helpful message if libvte not presentPeter Maydell
If the system has GTK but not libvte, it's more helpful to tell the user that libvte is missing than to simply say that GTK is not present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1374162121-31582-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-15Merge git://github.com/hw-claudio/qemu-aarch64-queue into tcg-nextRichard Henderson
2013-07-15tcg/aarch64: Implement tlb lookup fast pathJani Kokkonen
Supports CONFIG_QEMU_LDST_OPTIMIZATION Signed-off-by: Jani Kokkonen <jani.kokkonen@huawei.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2013-07-09configure: Simplify alternate .text segmentRichard Henderson
For bsd-user and linux-user emulation modes QEMU needs to be linked at an alternate .text segment address, so that it's out of the way of the guest executable. Instead of including modified linker scripts for each arch, just set the address with -Ttext-segment if supported, or by using sed to edit the default linker script. Cc: Ed Maste <emaste@freebsd.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Acked-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Ed Maste <emaste@freebsd.org> Message-id: 1371867016-7660-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-21configure: Add signed*signed check to [u]int128_t testPeter Maydell
clang 3.3 with -fsanitize=undefined will fail to link code containing an int128_t * int128_t multiply (http://llvm.org/bugs/show_bug.cgi?id=16404) so add this to our configure test for whether [u]int128_t are usable. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-21configure: Fix "ERROR: ERROR: " for missing/incompatible DTCAndreas Färber
error_exit already prepends "ERROR: ", so no need to print it manually. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-14configure: Require libfdt for arm, ppc, microblaze softmmu targetsPeter Maydell
A number of our softmmu targets (PPC, ARM, Microblaze) now more or less require flattened device tree support for various board models to work correctly. Make libfdt mandatory if the target list includes these, rather than building unhelpful half-functional binaries. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Message-id: 1369409217-7553-2-git-send-email-peter.maydell@linaro.org
2013-06-14configure: dtc: Probe for libfdt_env.hPeter Crosthwaite
Currently QEMU provides a local clone of the file libfdt_env.h in /include. This file is supposed to come with the libfdt package and is only needed for broken installs of libfdt. Now that we have submodule dtc, just ignore these broken installs and prompt for the dtc submodule install instead. QEMU's local libfdt_env.h is removed accordingly. Manifests as a bug when building QEMU with modern libfdt. The new version of libfdt does not compile when QEMUs libfdt_env.h takes precedence over the hosts. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 9b6a3a52e3f46cfbc1ded9ab56385ec045e46705.1369628289.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-14build: drop TARGET_TYPEPaolo Bonzini
Just use the TARGET_NAME free string. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1370349928-20419-6-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-14main: use TARGET_ARCH only for the target-specific #definePaolo Bonzini
Everything else needs to match the executable name, which is TARGET_NAME. Before: $ sh4eb-linux-user/qemu-sh4eb --help usage: qemu-sh4 [options] program [arguments...] Linux CPU emulator (compiled for sh4 emulation) After: $ sh4eb-linux-user/qemu-sh4eb --help usage: qemu-sh4eb [options] program [arguments...] Linux CPU emulator (compiled for sh4eb emulation) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1370349928-20419-5-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-14build: rename TARGET_ARCH2 to TARGET_NAMEPaolo Bonzini
Do not introduce any new use yet. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1370349928-20419-3-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-14Merge remote-tracking branch 'mjt/trivial-patches-next' into stagingAnthony Liguori
# By Michael Tokarev (4) and others # Via Michael Tokarev * mjt/trivial-patches-next: (26 commits) piix: fix some printf errors when debug is enabled cputlb: fix debug logs create qemu_openpty_raw() helper function and move it to a separate file main-loop: do not include slirp/slirp.h, use libslirp.h instead libcacard/vscclient: fix leakage of socket on error paths linux-headers: Update to v3.10-rc5 KVM: PPC: Add dummy kvm_arch_init_irq_routing() KVM: S390: Add dummy kvm_arch_init_irq_routing() KVM: ARM: Add dummy kvm_arch_init_irq_routing() ivshmem: add missing error exit(2) hw/xen: Use g_free instead of free and fix potential memory leaks target-sparc: Replace free by g_free hw/scsi: Don't increment a boolean value device tree: Fix cppcheck warning Makefile: Install qemu-img and qemu-nbd man pages only if built Unbreak -no-quit for GTK, validate SDL options gtk: implement -full-screen char/serial: serial_ioport_write: Factor out common code char/serial: Use generic Fifo8 char/serial: cosmetic fixes. ... Message-id: 1371207042-17980-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-14Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori
# By Andreas Färber (12) and others # Via Andreas Färber * afaerber/qom-cpu: spapr_rtas: Abstract rtas_start_cpu() with qemu_get_cpu() spapr_rtas: Abstract rtas_query_cpu_stopped_state() with qemu_get_cpu() memory_mapping: Improve qemu_get_guest_memory_mapping() error reporting dump: Abstract dump_init() with cpu_synchronize_all_states() cpu: Change default for CPUClass::get_paging_enabled() dump: Drop qmp_dump_guest_memory() stub and build for all targets memory_mapping: Drop qemu_get_memory_mapping() stub cpu: Turn cpu_get_memory_mapping() into a CPUState hook memory_mapping: Move MemoryMappingList typedef to qemu/typedefs.h cpu: Turn cpu_paging_enabled() into a CPUState hook monitor: Simplify do_inject_mce() with qemu_get_cpu() target-i386: cpu: Fix potential buffer overrun in get_register_name_32() target-i386: Set level=4 on Conroe/Penryn/Nehalem target-i386: Update model values on Conroe/Penryn/Nehalem CPU models pc: Create pc-*-1.6 machine-types pc: Fix crash when attempting to hotplug CPU with negative ID dump: Move stubs into libqemustub.a
2013-06-12configure: permit compilation on arm aarch64Claudio Fontana
support compiling on aarch64. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 51A5C5ED.90103@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-12tcg/aarch64: implement user mode qemu ld/stJani Kokkonen
also put aarch64 in the list of archs that do not need an ldscript. Signed-off-by: Jani Kokkoken <jani.kokkonen@huawei.com> Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 51AF40EE.1000104@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-12configure: Drop CONFIG_ATFILE testPeter Maydell
Nobody uses the CONFIG_ATFILE test now, so just drop it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Message-id: 1370126121-22975-3-git-send-email-peter.maydell@linaro.org
2013-06-11configure: Disable host-bsd USB on FreeBSDEd Maste
It hasn't built since FreeBSD 8.x, and is disabled by a patch in the FreeBSD ports tree. FreeBSD is migrating to QEMU's libusb support. Signed-off-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 01:38:46 +0000