aboutsummaryrefslogtreecommitdiff
path: root/chardev/char.c
AgeCommit message (Collapse)Author
2020-12-19qapi: Use QAPI_LIST_PREPEND() where possibleEric Blake
Anywhere we create a list of just one item or by prepending items (typically because order doesn't matter), we can use QAPI_LIST_PREPEND(). But places where we must keep the list in order by appending remain open-coded until later patches. Note that as a side effect, this also performs a cleanup of two minor issues in qga/commands-posix.c: the old code was performing new = g_malloc0(sizeof(*ret)); which 1) is confusing because you have to verify whether 'new' and 'ret' are variables with the same type, and 2) would conflict with C++ compilation (not an actual problem for this file, but makes copy-and-paste harder). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20201113011340.463563-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [Straightforward conflicts due to commit a8aa94b5f8 "qga: update schema for guest-get-disks 'dependents' field" and commit a10b453a52 "target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c" resolved. Commit message tweaked.] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-12-10Tweak a few "Parameter 'NAME' expects THING" error messageMarkus Armbruster
Change to "expects a THING" where that's an obvious improvement Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201113082626.2725812-11-armbru@redhat.com>
2020-11-03sockets: Make abstract UnixSocketAddress depend on CONFIG_LINUXMarkus Armbruster
The abstract socket namespace is a non-portable Linux extension. An attempt to use it elsewhere should fail with ENOENT (the abstract address looks like a "" pathname, which does not resolve). We report this failure like Failed to connect socket abc: No such file or directory Tolerable, although ENOTSUP would be better. However, introspection lies: it has @abstract regardless of host support. Easy enough to fix: since Linux provides them since 2.2, 'if': 'defined(CONFIG_LINUX)' should do. The above failure becomes Parameter 'backend.data.addr.data.abstract' is unexpected I consider this an improvement. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-30char: fix logging when chardev write failsDaniel P. Berrangé
The qemu_chr_write_buffer() method sends data to the chardev backend for writing, and then also writes to the log file. In case the chardev backend only writes part of the data buffer, we need to make sure we only log the same subset. qemu_chr_write_buffer() will be invoked again later to write the rest of the buffer. In the case the chardev backend returns an error though, no further attempts to likely to be made to write the data. We must therefore write the entire buffer to the log immediately. An example where this is important is with the socket backend. This will return -1 for all writes if no client is currently connected. We still wish to write data to the log file when no client is present though. This used to work because the chardev would return "len" to pretend it had written all data when no client is connected, but this changed to return an error in commit 271094474b65de1ad7aaf729938de3d9b9d0d36f Author: Dima Stepanov <dimastep@yandex-team.ru> Date: Thu May 28 12:11:18 2020 +0300 char-socket: return -1 in case of disconnect during tcp_chr_write and this broke the logging, resulting in all data being discarded when no client is present. Fixes: https://bugs.launchpad.net/qemu/+bug/1893691 Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-16util: rename qemu_open() to qemu_open_old()Daniel P. Berrangé
We want to introduce a new version of qemu_open() that uses an Error object for reporting problems and make this it the preferred interface. Rename the existing method to release the namespace for the new impl. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-13chardev: Extract system emulation specific codePhilippe Mathieu-Daudé
Split out code only used during system emulation, to reduce code pulled in user emulation and tools. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200423202112.644-6-philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-07-13chardev: Reduce "char-mux.h" scope, rename it "chardev-internal.h"Philippe Mathieu-Daudé
No file out of chardev/ requires access to this header, restrict its scope. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200423202112.644-5-philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-07-13chardev: don't abort on attempt to add duplicated chardevMarc-André Lureau
This is a regression from commit d2623129a7d ("qom: Drop parameter @errp of object_property_add() & friends"). (qemu) chardev-add id=null,backend=null (qemu) chardev-add id=null,backend=null Unexpected error in object_property_try_add() at /home/elmarco/src/qemu/qom/object.c:1166: attempt to add duplicate property 'null' to object (type 'container') That case is currently not covered in the test suite, but will be with the queued patch "char: fix use-after-free with dup chardev & reconnect". Fixes: d2623129a7dec1d3041ad1221dda1ca49c667532 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2020-07-10qemu-option: Use returned bool to check for failureMarkus Armbruster
The previous commit enables conversion of foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for QemuOpts functions that now return true / false on success / error. Coccinelle script: @@ identifier fun = { opts_do_parse, parse_option_bool, parse_option_number, parse_option_size, qemu_opt_parse, qemu_opt_rename, qemu_opt_set, qemu_opt_set_bool, qemu_opt_set_number, qemu_opts_absorb_qdict, qemu_opts_do_parse, qemu_opts_from_qdict_entry, qemu_opts_set, qemu_opts_validate }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-15-armbru@redhat.com> [Conflict with commit 0b6786a9c1 "block/amend: refactor qcow2 amend options" resolved by rerunning Coccinelle on master's version]
2020-07-07chardev: enable modules, use for brailleGerd Hoffmann
Removes brlapi library dependency from core qemu. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20200624131045.14512-11-kraxel@redhat.com
2020-06-18chardev/char.c: Use qemu_co_sleep_ns if in coroutineLukas Straub
To be able to convert compare_chr_send to a coroutine in the next commit, use qemu_co_sleep_ns if in coroutine. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-05-20qemu-sockets: add abstract UNIX domain socket supportxiaoqiang zhao
unix_listen/connect_saddr now support abstract address types two aditional BOOL switches are introduced: tight: whether to set @addrlen to the minimal string length, or the maximum sun_path length. default is TRUE abstract: whether we use abstract address. default is FALSE cli example: -monitor unix:/tmp/unix.socket,abstract,tight=off OR -chardev socket,path=/tmp/unix.socket,id=unix1,abstract,tight=on Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-03-06hmp: Fail gracefully if chardev is already in useKevin Wolf
Trying to attach a HMP monitor to a chardev that is already in use results in a crash because monitor_init_hmp() passes &error_abort to qemu_chr_fe_init(): $ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo --mon foo QEMU 4.2.50 monitor - type 'help' for more information (qemu) Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220: qemu-system-x86_64: --mon foo: Device 'foo' is in use Abgebrochen (Speicherabzug geschrieben) Fix this by allowing monitor_init_hmp() to return an error and passing any error in qemu_chr_fe_init() to its caller instead of aborting. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200224143008.13362-19-kwolf@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-01-10Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Compat machines fix (Denis) * Command line parsing fixes (Michal, Peter, Xiaoyao) * Cooperlake CPU model fixes (Xiaoyao) * i386 gdb fix (mkdolata) * IOEventHandler cleanup (Philippe) * icount fix (Pavel) * RR support for random number sources (Pavel) * Kconfig fixes (Philippe) # gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (38 commits) chardev: Use QEMUChrEvent enum in IOEventHandler typedef chardev: use QEMUChrEvent instead of int chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler hw/ipmi: Remove unnecessary declarations target/i386: Add missed features to Cooperlake CPU model target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub hw/rtc/mc146818: Add missing dependency on ISA Bus hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-08chardev: use QEMUChrEvent instead of intPaolo Bonzini
This uses the QEMUChrEvent enum everywhere except in IOEventHandler. The IOEventHandler change needs to happen at once for all front ends and is done with Coccinelle in the next patch. (Extracted from a patch by Philippe Mathieu-Daudé). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-07chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandlerPhilippe Mathieu-Daudé
The Chardev events are listed in the QEMUChrEvent enum. To be able to use this enum in the IOEventHandler typedef, we need to explicit all the events ignored by this frontend, to silent the following GCC warning: chardev/char.c: In function ‘qemu_chr_be_event’: chardev/char.c:65:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch] 65 | switch (event) { | ^~~~~~ chardev/char.c:65:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch] chardev/char.c:65:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch] cc1: all warnings being treated as errors Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20191218172009.8868-14-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-07chardev: generate an internal id when none givenMarc-André Lureau
Internally, qemu may create chardev without ID. Those will not be looked up with qemu_chr_find(), which prevents using qdev_prop_set_chr(). Use id_generate(), to generate an internal name (prefixed with #), so no conflict exist with user-named chardev. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: xiaoqiang zhao <zxq_yx_007@163.com>
2019-06-18monitor: Replace monitor_init() with monitor_init_{hmp, qmp}()Kevin Wolf
Most callers know which monitor type they want to have. Instead of calling monitor_init() with flags that can describe both types of monitors, make monitor_init_{hmp,qmp}() public interfaces that take specific bools instead of flags and call these functions directly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20190613153405.24769-15-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-04-18char: Make -chardev help print to stdoutMarkus Armbruster
Command line help explicitly requested by the user should be printed to stdout, not stderr. We do elsewhere. Adjust -chardev to match: use qemu_printf() instead of error_printf(). Plain printf() would be wrong because we need to print to the current monitor for "chardev-add help". Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190417190641.26814-14-armbru@redhat.com>
2019-03-11chardev: add support for authorization for TLS clientsDaniel P. Berrange
Currently any client which can complete the TLS handshake is able to use a chardev server. The server admin can turn on the 'verify-peer' option for the x509 creds to require the client to provide a x509 certificate. This means the client will have to acquire a certificate from the CA before they are permitted to use the chardev server. This is still a fairly low bar. This adds a 'tls-authz=OBJECT-ID' option to the socket chardev backend which takes the ID of a previously added 'QAuthZ' object instance. This will be used to validate the client's x509 distinguished name. Clients failing the check will not be permitted to use the chardev server. For example to setup authorization that only allows connection from a client whose x509 certificate distinguished name contains 'CN=fred', you would use: $QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-simple,id=authz0,identity=CN=laptop.example.com,,\ O=Example Org,,L=London,,ST=London,,C=GB \ -chardev socket,host=127.0.0.1,port=9000,server,\ tls-creds=tls0,tls-authz=authz0 \ ...other qemu args... Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-13char: allow specifying a GMainContext at opening timePaolo Bonzini
This will be needed by vhost-user-test, when each test switches to its own GMainLoop and GMainContext. Otherwise, for a reconnecting socket the initial connection will happen on the default GMainContext, and no one will be listening on it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190202110834.24880-1-pbonzini@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-02-12chardev: ensure qemu_chr_parse_compat reports missing driver errorDaniel P. Berrangé
If no valid char driver was identified the qemu_chr_parse_compat method was silent, leaving callers no clue what failed. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190211182442.8542-8-berrange@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-12-12char: add a QEMU_CHAR_FEATURE_GCONTEXT flagMarc-André Lureau
QEMU_CHAR_FEATURE_GCONTEXT declares the character device can switch GMainContext. Assert we don't switch context when the character device doesn't provide this feature. Character device users must not violate this restriction. In particular, user configurations that violate them must be rejected. Existing frontend that rely on context switching would now assert() if the backend doesn't allow it (instead of silently producing undesired events in the default context). Following patches improve the situation by reporting an error earlier instead, on the frontend side. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181205203737.9011-4-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-11-05chardev: Indent list of chardevsMax Reitz
Following the example of qemu_opts_print_help(), indent all entries in the list of character devices. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-01chardev: Add websocket supportJulia Suvorova
New option "websocket" added to allow using WebSocket protocol for chardev socket backend. Example: -chardev socket,websocket,server,id=... Signed-off-by: Julia Suvorova <jusual@mail.ru> Message-Id: <20181018223501.21683-3-jusual@mail.ru> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-10-19char: Use error_printf() to print help and suchMarkus Armbruster
Calling error_report() in a function that takes an Error ** argument is suspicious. Convert a few that are actually help and such to error_printf(). Improves output of -chardev help from qemu-system-x86_64: -chardev help: Available chardev backend types: serial ... to Available chardev backend types: serial ... Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181017082702.5581-8-armbru@redhat.com>
2018-10-03chardev: mark the calls that allow an implicit mux monitorMarc-André Lureau
This is mostly for readability of the code. Let's make it clear which callers can create an implicit monitor when the chardev is muxed. This will also enforce a safer behaviour, as we don't really support creating monitor anywhere/anytime at the moment. Add an assert() to make sure the programmer explicitely wanted that behaviour. There are documented cases, such as: -serial/-parallel/-virtioconsole and to less extent -debugcon. Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen console. Add a FIXME note for those, but keep the support for now. Other qemu_chr_new() callers either have a fixed parameter/filename string or do not need it, such as -qtest: * qtest.c: qtest_init() Afaik, only used by tests/libqtest.c, without mux. I don't think we support it outside of qemu testing: drop support for implicit mux monitor (qemu_chr_new() call: no implicit mux now). * hw/ All with literal @filename argument that doesn't enable mux monitor. * tests/ All with @filename argument that doesn't enable mux monitor. On a related note, the list of monitor creation places: - the chardev creators listed above: all from command line (except perhaps Xen console?) - -gdb & hmp gdbserver will create a "GDB monitor command" chardev that is wired to an HMP monitor. - -mon command line option From this short study, I would like to think that a monitor may only be created in the main thread today, though I remain skeptical :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-03-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel) * SCSI fix to pass maximum transfer size (Daniel Barboza) * chardev fixes and improved iothread support (Daniel Berrangé, Peter) * checkpatch tweak (Eric) * make help tweak (Marc-André) * make more PCI NICs available with -net or -nic (myself) * change default q35 NIC to e1000e (myself) * SCSI support for NDOB bit (myself) * membarrier system call support (myself) * SuperIO refactoring (Philippe) * miscellaneous cleanups and fixes (Thomas) # gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (69 commits) tcg: fix cpu_io_recompile replay: update documentation replay: save vmstate of the asynchronous events replay: don't process async events when warping the clock scripts/replay-dump.py: replay log dumper replay: avoid recursive call of checkpoints replay: check return values of fwrite replay: push replay_mutex_lock up the call tree replay: don't destroy mutex at exit replay: make locking visible outside replay code replay/replay-internal.c: track holding of replay_lock replay/replay.c: bump REPLAY_VERSION again replay: save prior value of the host clock replay: added replay log format description replay: fix save/load vm for non-empty queue replay: fixed replay_enable_events replay: fix processing async events cpu-exec: fix exception_index handling hw/i386/pc: Factor out the superio code hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # default-configs/i386-softmmu.mak # default-configs/x86_64-softmmu.mak
2018-03-13char: allow passing pre-opened socket file descriptor at startupDaniel P. Berrange
When starting QEMU management apps will usually setup a monitor socket, and then open it immediately after startup. If not using QEMU's own -daemonize arg, this process can be troublesome to handle correctly. The mgmt app will need to repeatedly call connect() until it succeeds, because it does not know when QEMU has created the listener socket. If can't retry connect() forever though, because an error might have caused QEMU to exit before it even creates the monitor. The obvious way to fix this kind of problem is to just pass in a pre-opened socket file descriptor for the QEMU monitor to listen on. The management app can now immediately call connect() just once. If connect() fails it knows that QEMU has exited with an error. The SocketAddress(Legacy) structs allow for FD passing via the monitor, and now via inherited file descriptors from the process that spawned QEMU. The final missing piece is adding a 'fd' parameter in the socket chardev options. This allows both HMP usage, pass any FD number with SCM_RIGHTS, then running HMP commands: getfd myfd chardev-add socket,fd=myfd Note that numeric FDs cannot be referenced directly in HMP, only named FDs. And also CLI usage, by leak FD 3 from parent by clearing O_CLOEXEC, then spawning QEMU with -chardev socket,fd=3,id=mon -mon chardev=mon,mode=control Note that named FDs cannot be referenced in CLI args, only numeric FDs. We do not wire this up in the legacy chardev syntax, so you cannot use FD passing with '-qmp', you must use the modern '-mon' + '-chardev' pair. When passing pre-opened FDs there is a restriction on use of TLS encryption. It can be used on a server socket chardev, but cannot be used for a client socket chardev. This is because when validating a server's certificate, the client needs to have a hostname available to match against the certificate identity. An illustrative example of usage is: #!/usr/bin/perl use IO::Socket::UNIX; use Fcntl; unlink "/tmp/qmp"; my $srv = IO::Socket::UNIX->new( Type => SOCK_STREAM(), Local => "/tmp/qmp", Listen => 1, ); my $flags = fcntl $srv, F_GETFD, 0; fcntl $srv, F_SETFD, $flags & ~FD_CLOEXEC; my $fd = $srv->fileno(); exec "qemu-system-x86_64", \ "-chardev", "socket,fd=$fd,server,nowait,id=mon", \ "-mon", "chardev=mon,mode=control"; Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2018-03-12chardev: introduce chr_machine_done hookPeter Xu
Introduce ChardevClass.chr_machine_done() hook so that chardevs can run customized procedures after machine init. There was an existing mux user already that did similar thing but used a raw machine done notifier. Generalize it into a framework, and let the mux chardevs provide such a class-specific hook to achieve the same thing. Then we can move the mux related code to the char-mux.c file. Since at it, replace the mux_realized variable with the global machine_init_done varible. This notifier framework will be further leverged by other type of chardevs soon. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180306053320.15401-6-peterx@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-2-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-01-12chardev: introduce qemu_chr_timeout_add_ms()Peter Xu
It's a replacement of g_timeout_add[_seconds]() for chardevs. Chardevs now can have dedicated gcontext, we should always bind chardev tasks onto those gcontext rather than the default main context. Since there are quite a few of g_timeout_add[_seconds]() callers, a new function qemu_chr_timeout_add_ms() is introduced. One thing to mention is that, terminal3270 is still always running on main gcontext. However let's convert that as well since it's still part of chardev codes and in case one day we'll miss that when we move it out of main gcontext too. Also, convert all the timers from GSource tags into GSource pointers. Gsource tag IDs and g_source_remove()s can only work with default gcontext, while now these GSources can logically be attached to other contexts. So let's use explicit g_source_destroy() plus another g_source_unref() to remove a timer. Note: when in the timer handler, we don't need the g_source_destroy() any more since that'll be done automatically if the timer handler returns false (and that's what all the current handlers do). Yet another note: in pty_chr_rearm_timer() we take special care for ms=1000. This patch merged the two cases into one. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180104141835.17987-4-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21chardev: fix backend events regression with mux chardevMarc-André Lureau
Kirill noticied that on recent versions on QEMU he was not able to trigger SysRq to invoke debug capabilites of Linux Kernel. He tracked it down to qemu_chr_be_event() ignoring CHR_EVENT_BREAK due s->be being NULL. The bug was introduced in 2.8, commit a4afa548fc6d ("char: move front end handlers in CharBackend"). Since the commit, the qemu_chr_be_event() failed to deliver CHR_EVENT_BREAK due to qemu_chr_fe_init() does not set s->be in case of mux. Let's fix this by teaching mux to send an event to the frontend with the focus. Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Fixes: a4afa548fc6d ("char: move front end handlers in CharBackend") Message-Id: <20171103152824.21948-2-marcandre.lureau@redhat.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22chardev: remove context in chr_update_read_handlerPeter Xu
We had a per-chardev cache for context, then we don't need this parameter to be passed in every time when chr_update_read_handler() called. As long as we are calling chr_update_read_handler() using qemu_chr_be_update_read_handlers() we'll be fine. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1505975754-21555-5-git-send-email-peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22chardev: add Chardev.gcontext fieldPeter Xu
It caches the gcontext that is used to poll the chardev IO. Before this patch, we only passed it in via chr_update_read_handlers(). However that may not be enough if the char backend is disconnected and reconnected afterward. There are chardev codes that still assumed the context be NULL (which is the main context). Will fix that up in following up patches. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1505975754-21555-3-git-send-email-peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-22chardev: new qemu_chr_be_update_read_handlers()Peter Xu
Add a wrapper for the chr_update_read_handler(). Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1505975754-21555-2-git-send-email-peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-04qapi: Mechanically convert FOO_lookup[...] to FOO_str(...)Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1503564371-26090-14-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-08-01char: don't exit on hmp 'chardev-add help'Anton Nefedov
qemu_chr_new_from_opts() is used from both vl.c and hmp, and it is quite confusing to see qemu suddenly exit after receiving a help option in hmp. Do exit(0) from vl.c instead. Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Message-Id: <1500977081-120929-1-git-send-email-anton.nefedov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14hmp: add hmp analogue for qmp-chardev-changeAnton Nefedov
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1499342940-56739-11-git-send-email-anton.nefedov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14char: chardevice hotswapAnton Nefedov
This patch adds a possibility to change a char device without a frontend removal. Ideally, it would have to happen transparently to a frontend, i.e. frontend would continue its regular operation. However, backends are not stateless and are set up by the frontends via qemu_chr_fe_<> functions, and it's not (generally) possible to replay that setup entirely in a backend code, as different chardevs respond to the setup calls differently, so do frontends work differently basing on those setup responses. Moreover, some frontend can generally get and save the backend pointer (qemu_chr_fe_get_driver()), and it will become invalid after backend change. So, a frontend which would like to support chardev hotswap has to register a "backend change" handler, and redo its backend setup there. Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <1499342940-56739-4-git-send-email-anton.nefedov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14char: move QemuOpts->ChardevBackend translation to a separate funcAnton Nefedov
parse function will be used by the following patch Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Message-Id: <1499342940-56739-2-git-send-email-anton.nefedov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-29Add chardev-send-break monitor commandStefan Fritsch
Sending a break on a serial console can be useful for debugging the guest. But not all chardev backends support sending breaks (only telnet and mux do). The chardev-send-break command allows to send a break even if using other backends. Signed-off-by: Stefan Fritsch <sf@sfritsch.de> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170611074817.13621-1-sf@sfritsch.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Use 'send a break' in all 3 pieces of text as suggested by eblake
2017-06-08chardev: don't use alias names in parse_compat()Marc-André Lureau
"parport" is considered "old" since commit 88a946d32d, when "parallel" was added. Similarly for "tty" in commit d59044ef74d. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-06-02char: rename functions that are not part of feMarc-André Lureau
There is no clear reason to have those functions associated with frontend. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02char: move CharBackend handling in char-fe unitMarc-André Lureau
Move all the frontend struct and methods to a seperate unit. This avoids accidentally mixing backend and frontend calls, and helps with readabilty. Make qemu_chr_replay() a macro shared by both char and char-fe. Export qemu_chr_write(), and use a macro for qemu_chr_write_all() (nb: yes, CharBackend is for char frontend :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 15:42:13 +0000